Oracle Forms URL not accessible outside the server

Similar Questions

• Site Web Server not accessible via the internet

  Hello Apple community,

  I had a problem with the.app Web sites, where my site Internet (FQDN) is accessible via the network internal, but not accessible through the internet. I have port ports 80 and 443 passed on my firewall and I can see the ports open via nmap on an external connection.

  When I browse the site via http, I get redirect to 443 then it just resets and I get no error page. Internally, the page redirects to 443 and loads fine with the popup of trust initial cert (self-signed cert) that I then store to my keychain and loading the page well. I get no this pop up via an external network.

  Accessibility is accessible by 80 (green circle icon) but not of 443 for reasons I can't understand.

  I already tried to remedy the situation of the measures:

  Create a new self-signed cert to use. (same results)

  Disable ssl and disable redirection. (causes a load error in the browser)

  Wiped the OS reinstall OS X El Capitan and.app. (same results)

  Checked the port forwarding on my firewall Meraki 15 times (looks good)

  Disabled the feature IPS of the PPE on the Meraki (same results)

  Maybe I'm just on something? I hope someone out there can help.

  Thank you!

  Well, thought about it. < bangs head >.

  ATT Uverse uses port 443 for flow towards Wireless HD receivers in the House. There is a way to change the port it uses, and I'll try and do it later and post my results in case someone else is having the same problems.

  Thinks... "Why the hell ATT would use a common port for Wireless HD? SMH.

• Oracle form functions and procedures in the APEX, how?

  I'm working to recreate in the APEX, already existing read only forms in Oracle Forms. Report features interactive APEX among other things, in fact worth as well as to target a different audience than utilizies versions of Oracle Form. Versions of Oracle Forms use a lot of pre and post query triggers, PLSQL functions.
  
  In Oracle Forms that places, these functions can be found in the "Units of program" section of the form. A feature typical of this kind, based on a particular Mission ID route, collecting names of regular passengers, is shaped with a comma and a space after each of them, in a single string that is returned and displayed the list of passengers of a line.
  
  I have all of this written code so I can move most of the main request of the Oracle form in an interactive report. These functions and triggers called in the form of the "Units of program" section of the Oracle form rather than stored in the database schema in a package, where they would go inside the APEX? Can I create a 'shortcut' in the APEX and call it from the interactive report "Source Région"? I can create the PLSQL function at the level of the region of the interactive report or page level? Or, my best bet creates a package that is stored in the database, all these functions and/or proecedures I might need the original form of Oracle?
  
  Some advice would be greatly appreciated.

  RLBickham wrote:
  I don't think I've been pretty clear in the description of the specific thing I want to do, simply, it does not reach the level of forms of conversion of the APEX. It is basically a problem of PLSQL function.

  I have an interactive report which is currently 90 percent of what I want however, each line, which represents a Mission may have several feet. Each arm has two places or ICAO codes attached to it. Based on the number of Mission, I want to loop through the array of leg, collect all the codes of ICAO for this Mission, put them together in 1 variable separated by a coma and add this variable to display the columns in this interactive report as the last column.

  In Oracle Forms, I have a function registered in the database, which is called in the main query. Maybe I ask a question that does not need to be asked, but anyway my question is can I put this function currently in the database somewhere within the interactive report and somehow reference it via Http, or should I just stick with set of functions and procedures in the packages stored in the database and called the conventional way?

  You could switch the function to the database and call it from the report query, but it sounds as if it were superfluous. In the report query using any form of Re: 4. How can I convert rows to columns? is appropriate for your version of the (unspecified) database.

  -----

  When you have a problem, you will get an answer faster, more efficient including information as much information as possible from the outset. This should include:

• Full version of APEX
  
• Complete operating system DB, version, edition, host
  
• Architecture of Web server (EPG, SST or APEX listener/host operating system)
  
• Browser (s) and version (s) used
  
• Theme
  
• Model (s)


• Region/section type (s) (particularly as to distinguish if a 'report' is a standard report, an interactive report, or indeed a 'update report' (i.e. a tabular presentation))

  With APEX, we also had the chance to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproduce things is the best way to solve most of the questions, particularly those relating to the layout and Visual formatting. If you expect a detailed response it is appropriate that you take on an important part of the effort by getting as much as possible with an example of the problem on apex.oracle.com before asking for help on specific issues, then we can see firsthand.

• TV not recognized by the server-&gt; 40L 73

  Hello

  My problem is already listed on this forum but I can't find a solution or explanation.

  I recorded with a Toshiba account in order to use the "smart" features of my incl. TV services VOD as Maxdome etc...

  Whenever I push the button 'cloud' I get the message: "your TV was not recognized by the server. Press OK to re - connect to the server... »

  When I press OK, it will start to accept T & C, privacy, user name, password, etc... The connection will work with my current username and password...
  But unfortunately he will not stay for the next time.

  Call the hotline they suggest to send the unit for repair... I can't believe that there is a problem with my TV... But server.

  Any suggestion? May be related to an IPv6 Internet connection?

  In addition, even, I would say I'm a fan of Toshiba, my TV's performance are simply bad. When I have the cloud works, it takes two minutes until Maxdome should be started.

  And can someone tell me WHY I need to get into the clouds to access my saved content? Or Media Player? This content "offline" should be much more quickly accessible.

  Thanks for your help and your comments in advance.

  Maybe you should just a few solutions of circumvention of the Commons:
  First, you must set the default TV.
  Then configure the internet connection once more and then try to connect to the cloud to accept all of the terms and conditions, privacy and other things.

  By the way: you should also check if your firmware is up to date. This can be checked here:
  http://www.Toshiba-OM.NET/firmware.php

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• File are not accessible by the system

  There is, I had restored my computer using suite recovery of my computer.  I backup all before starting the process.  After when the process was done and I had everybody works very well, I went to remove my files of backup for the space, but I have a really stubborn file/folder.  I'm going to remove it and I get a message saying that the file is not accessible by the system.  From there, I tried going through safe mode to delete, taking possession of the records, using prompt command to remove and even using Unlocker.  None of these methods was able to remove this darn folder.  Now, I don't know what to do next.  If unlocker failed to remove the folder, then I don't think that there many options remain outside to wipe the drive.  and it's something I don't want to do.  So, I ask, what should I do next?

  Picture of the Error Message

  Photo of properties of "folders".

  Hi ShoaJo,

  Error code 14, you can see the article mentioned and check.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  I hope this helps.

• OfficeJet6500A more - ePrint Setup error - this printer could not connect to the server

  My 6500 a is connected to the internet and I am able to print wireless.

  When you try to set up ePrint, I go through the following menu path: installing, configuring Web services, the printer email address.

  I get the message error "this printer could not connect to the server.

  I have read and tried the others 'solutions' on the plate that involved turning market eprint, crossing out-lit power cycles, turning wireless on and outside, turning on the printer and wait 5 minutes, restoration of factory settings...   Nothing works.

  Any ideas?

  From one day to the next it printed the ePrint address, so I guess that the problem was with the HP sever.

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• Calc Manager of error "could not connect to the server Dimension."

  Could not connect to the server of Dimension.

  Please make sure that the required services are started.

  https://servername:19443 / HyperionPlanning/servlet/HspAppManagerServlet:

  Connection refused: connect.

  Hyperion Planning - 11.1.2.3

  can someone help me.

  Thank you

  Follow the steps below-

  -Stop all services
  -Run the Oracle's EPM System Configurator (all Instances)
  -Select Hyperion Foundation-> the common settings and configure the Web server
  -Click next and deselect ' use SSL for Java web Application Server Communication (requires manual configuration).
  -Go through the process and finishing
  -start the EMP Services

  Thank you

  ~ KKT ~.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Y at - it a setting or a config that keeps me from typing the actual numeric address of a Web site, after which he said "could not connect to the server?

  From time to time that I step a numeric address for a Web site in the address bar, but when I do, Firefox just freezes for a while, then says could not connect to the server. It's fishy. (hook.)

  What is the format that you use for the IP address?

  If I type 98.124.44.207 in the address bar, need me to google. It works for you?

• Thunderbird does not connect to the server after update to 24.4. How can I fix it?

  TBird updated today V24.4 on my desktop and now it does not connect to the server. I have V23.4 on my lap top and it works fine. Someone at - he had this problem and figured out how to fix it?

  Please check your anti-virus software.
  He may have detected a change and decided to not allow Thunderbird. He could therefore block Thunderbird.

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• Capsule of the airport is not accessible from the internet

  Capsule of the airport is not accessible from the internet

  He could be reached at any time and has now stopped working?

  How have you tried?

  Three common methods... that you use?

  Airport drive - remote (3 methods)

• "Could not connect to the server Game Center"

  OK, so here's the deal:

  Im trying to connect to Game Center on my old phone to synchronize the progress of game. When I try to log in, it tells me that it could not connect to the server. I tried just about everything I could find on the Internet without success (discount and hard reboot reset settings do not work, and the servers are not enabled). Could someone tell me please how to fix this?

  iPhone 3GS, iOS 6.1.6

  Honestly, I don't want to hear that if you encounter the same problem, I just want to know how to solve this problem. Thanks in advance!

  Nevermind, it seems to have fixed itself.