(hp 6530 b) my speakers do not work unless the headphone is plugged!
I have (hp 6530 b win 7 64) I have a problem of noise from my speakers do not work unless the headphones plugged I installed upgrading the sound card and the problem still there.
and when I keep the connected headset and restart sound works normally, but after a few minutes back
Finally I found the solution... it's the finger printing device and I don't know what the relationship is between the fingerprint and noise problem anyway the solution is to install the latest definition of the fingerprint and I found its proper functioning !
Tags: Notebooks
Similar Questions
-
If the title pretty much sums up it. Speakers of my laptop won't work if my headset (or other external speaker) is plugged into the jack Socket 3.5 mm on the front of the laptop. This is a new feature for Windows 7. Long story short... the helmet and work of laptop speakers when the two are connected, or work with the unplugged helmet. Thanks for the help!
Control Panel of Goto-> Sound-> reading tab. Right-click on the speakers and select default Setas.
If it didn't he try to go to-> troubleshooting Control Panel and select troubleshoot audio playback. Follow the prompts.
Hope that helps.
All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.
-
Speakers do not work, but the headphones are
Hello
Just until yesterday, the speakers were working well, but today I try listening to something but no sound coming from the speaker.
I plugged my headphones and it seems to work very well. But when I unplug my headphones no sound. Can someone help me?
Thank you
Hello Ninito,
Because you heard tones during the display of the color bars in the embedded PSA Diagnostics, this means that the speakers work.
Because you can hear the audio through the headphones this means that the audio hardware and driver are working.
If you reinstall the audio driver * but still can not hear the speakers, this means that in the headphone detection circuit does not. When the detection circuit fails, Windows "believes" that a plug into the Jack and therefore will not allow audio to switch the speakers.
The solution is to replace the plug, but your model is taking part of the motherboard. To replace decision means replace the motherboard which is too expensive for most people. Your idea of using an external speaker system is probably your best workaround.
As you may know, Dell does not support Windows 8 on the model of the Studio 1558. I guess that the audio driver you are using is now the native audio driver that is built into Windows 8. You can also try the IDT audio driver (IDT is the manufacturer of audio equipment on a Studio 1558). This link will lead you to a page of drivers suggested for a Studio 1558 with Windows 8. If you want to try the driver IDT, go to this page and click the link under the word "Audio".
If you are able to install an IDT audio driver in your Studio 1558 with Windows 8, there is a solution that could allow audio to come through the speakers. This workaround is in V of article 2 of the Jack FAQ of headphones.
-
The sound in my apps does not work unless my headphones are plugged in, how to fix this?
The overall sound does not work in any of my apps unless earphones are connected. All other sound works and I checked the individual applications to ensure that the sound is turned on and he says he is.
Try this...
Close all open applications... Sign in your account... Perform a reset... Try again...
Reset ( No Data will be lost)
Press and hold the sleep/wake button and the Home button at the same time...
Wait for the Apple logo to appear...
Usually takes about 15-20 seconds... ( But may take longer...)
Release the buttons...
If no joy... Try to plug and unplug the helmet a few times... Be nice...
-
I tried to turn my phone off, then on again and that did nothing. How can I get this problem?
There could be some debris in the headset jack. First of all try to blow into it a few times and see if that helps. Otherwise, try to insert and then remove the headphones 8 - 10 times, then see if they are recognized.
-
my laptop speakers do not work but my headphone works very well
I have a laptop HP Pavilion 1d73us g6, and although my headset works fine the speakers are not. He is a recent problem. I tried troubleshooting with the windows with no result troubleshooting tool. I checked all the audio drivers and they check fine. I tried the driver software without success. Windows Media Player does not work. I get an error message when I try to use it. What else can I try? Carl
Hello @hifive11,
I read your post on how your laptop speakers do not work, but the headphones work fine, and I'd be happy to help you in this case!
The first step that I recommend is to follow this document on the no sound on speakers (Windows 7). This should help to restore the sound from your speakers.
You can also activate the speakers on your computer as default playback device. This is possible by following the steps below:
1. click on the Start button
2. click on Control Panel
3. click hardware and sound (the icons of sort by 'category' Control Panel) and then click on its
4. under reading, you should see one or two speaker icons. One of them should have a green check mark next to it (which will be the helmet of your laptop device). If the second speaker icon is not visible, right-click in the list of devices and select Show disabled devices
5. a second disabled icon "speakers" should appear. Right click on this icon, then click Activate
6. test your speakers
If the problem persists, I recommend to you your laptop a previous restore point before the speakers stopped working. This can be done by following the steps described in this document on using Microsoft System Restore (Windows 7).
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning
-
The contents of the folder WAV files will not work unless the folder is on the desktop.
Re: Windows Vista Home Premium 32 bit W/sp2 installed.
I created a new folder for Wav files and set it on my desk until I was finished downloading the files for convenience purposes. I then used them to slightly change the default sounds for different commands, events and others. Everything worked fine until I moved the folder on the desktop to another location. Files located in the folder assigned and uncorrupted but will no longer work when the event or the command is enabled. If I move the folder to the desktop everything works well again. No error or anything are reported. The files in the folder will simply not work unless the folder is on the desktop. Is that all I could do to fix this?
Hello
1. what happens when you play the file from another location, you receive error message?
2 - is that happen with some .wav files or all files?
3. did you try copied the contents of the file and save it to another location and check the number?
Step 1: Restart the computer to boot to verify if any third-party application is causing the problem.
Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
Note: Make sure to restart the computer to normal startup followed step 7 in the link.
-
Original title: how to change system locale
So I'm doing a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.
I know how to do it manually. but I would like to create a program written in Java (or batch) to speed things up.
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
My speakers do not work after the installation of the last
Hello!
After that last HP´s download from HP Support Assistant, my speakers and subwoofer (audio Beats), do not work.
But the headphones work fine.
Spotify does not, they say that my sound card does not recognize them.
It's my unit:
HP Pavilion DV-7 (IN WARRANTY)
Nº of series 2CE2191SCM
Prod No. DEX02UA #ABA
Microsoft Windows 7 Home premium
IDT High Definition Audio Codec
Could you give me a solution step by step, easy to understand, as I don't not computer very experiance?
Thank you very much.
Check your model number again, I can't find the one you listed. You can get the product number by pressing Fn + ESC key or check the service Tag.
Click on the link below. Enter your product number. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & save the last Audio driver.
http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en
Go into the Control Panel, programs & features - software uninstall IDT. Reboot the laptop. After loading Windows, install IDT audio by using the downloaded file.
-
Logitech speakers do not work since the installation of Windows 7 Home Premium
Original title: audio help
Installed 7 Home premium on the computer. Logitech x-530 speakers are registered and that they do not work. Saya no audio devices installed. These speakers do not come with usb at the back of the computer. Jaks only black, yellow and green in the audio ports. How can I make them work?
Plug the green in your audio output. Make sure the volume of your software is truned upward as well as your speaker volume.
Your speakers are a dumb device - they have no need for anything whatsoever, but an audio to work on something output jack (probably can cling to an ipod) and something streaming for them.
-
BlackBerry Smartphones "BOLD" speakers do not work with the battery cover on
Hello world
I'm a relatively new Blackberry owner. I have "BOLD" for the last two months and it's been great. One of the things that impressed me at first was the quality of the sound from the internal speakers. Everything worked well for the first few weeks. In the last fews days, I noticed that I was missing calls because I heard the ring. Then I noticed that I couldn't hear songs when played music library. Thinking that it was some glitch of system, I took out the battery and it worked for awhile, but then stopped. Only after that examine more closely did achieve the work of great speakers with the cap of dough, but as soon as I put it back top makes it almost inaudible
At the moment I have with the lid not clicked in all above. In this position the speakers sound fantastic, but the rear could in a click at any time and silent sound again. Obviously not a good long-term fix. I searched these tips and have not found a similar problem. Right now, I think to order a cover for replacement of Amazon to see if it could be that my current coverage is "folded" or otherwise do something weird to the speakers.
I was wondering if anyone else has run into this and found a solution.
Thanks in advance for your help.
Rusty
Wow, this is one weird, never heard talk about this problem before. If you have insurance for your phone, go to the store and get a new one, this is what I would do or you can use your warranty with blackberry and get a new one on their part. I know this isn't much help, but why bother with a different battery cover when you can probably get a new phone. If you decide to go with the new battery cover reply back and let us know if the problem is resolved.
-
My audio does not work. It worked before I re-install Windows XP. What should I do? I'm supposed to have an audio installation disc? I'm new on the technical aspect of computers, so I know only the basics?
Using the Device Manager is a good way to get the drivers, but if you do a clean install on a computer or laptop, you must download the supplied drivers initially installed on the computer or laptop to the manufacturer. that is, if you have a Dell, then go to the Dell website.
the site Web of HP/Compaq
the Site of Asus
Acer site
Alienware website (Now owned by Dell)
eMachines Web site
IBM Web site
Sony Web site
Toshiba Web siteHave I no all the em? Anyway, if you have a driver supplied with the computer disc, use this cuz he'll have original manufacturer drivers and the software that you get on the website anyway.
Also, if it's a Dell, you would like to have a look and print their Instructions on how to install the drivers, Dell cuz drivers must be installed in a specific order.
Good luck. -
Hi all
I had done research on google without end, dell community support research, etc. and cannot find the solution. The internal computer screen does not work on my Latitude E6410, except if the display driver is disabled. I tried all the drivers on the Dell Web site (including previous versions). The laptop has the card Nvidia nvs 3100 m. I've updated to the latest version of the driver available from Nvidia, and it still doesn't work. However, I can use an external monitor using a VGA connection.
Tried with Windows 7 x 86 and x 64. X 86 and x 64 Windows 8. Windows XP x 86 same results.
The strange thing is that if I leave the compatible driver, I can see the screen flash Dell OEM and the beginning of the GUI of Windows boot, but once the driver is started, the screen goes black.
Ran the Dell diag and video passages. I think the problem is driver/software related like the screen works, but once the driver is loading with Windows, the screen stops video production.
BIOS is updated. All the other drivers installed.
Any suggestions?
Laptop is still under warranty, so if I have to I can get a mobo replaced, but want to exclude all other possibilities first.
Thanks for all comments and suggestions.
OK, so I finally found the fix (literally, this morning).
After browsing the internet, I found another site where this driver was the recommended fix and it worked:
http://www.Dell.com/support/drivers/us/en/19/DriverDetails?driverId=R287174
Now, my e6410 is not the nvidia driver and intel, only nvidia card.
If your e6410 Intel and Nvidia, you may need to play with the pilots to see what will work the Nvidia driver (I'm guessing the driver Dell A08 works well).
As a couple of my co-workers have the same e6410 and did not have this problem, it seems that the material appears to be the culprit, but only in the sense that a particular version of the Nvidia NVS 3100 m driver works with the Dell driver A08 and some will work with the driver Nvidia 302,80 (9.18.13.280) (which is installed by Windows as well). My Dell was purchases / delivered late 2010. My co-workers that Dell was purchase / shipped in early 2011. I don't know if the short time makes all the difference in what provided Dell (or correctly, what Nvidia to Dell Dell installed), but there is a difference.
I also tried to upgrade the driver A08 (which is the version of the driver 8.17.12.5922 dated dated: 31/07/2010) to the 9.18.13.280 (as of: 11/06/2012) and it did not work. I had to go back to the 8.17.12.5922 to get the video to work again.
My Nvidia NVS 3100 m firmware/bios version is: 70.18.53.00.04.
I hope this helps anyone with this issue, but for now, it seems that the A08 driver is necessary for users of this issue.
Good luck to all with this question, but I will now consider this matter resolved.
-
Newly added plugins do not work unless the application is removed and re-downloaded
Hi all!
A few days ago I started a new topic because I couldn't get the peripheral plugin works (see can't cordova-plugin-device works).
As I've experimented a lot with the GitHub repository - that I used before using actually my first plugin, I thought that something went wrong and decided to delete and reupload the app - which made the plugin works.
Now, I tried to add two new plugins (flashlight and oriented to the device), which did not work as well.
No update code → draw later or rebuild all did the trick. Once again, I have had to delete and reupload the app to make plugins work at all.
This behavior is normal or is this a bug?
Simply, I don't see the advantage to delete the entire application if I just want to add a plugin.
Thank you and best regards,
Maik
Exactly. Configuration changes are ignored with on hydration.
-
I'm working on fixing the laptop from my friend and I was able to get audio to play through the speakers. The thing is, the headphone jack is loose and the computer requires a pair of headphones are connected. I don't know how I did it, but I want to reproduce it. It would be cool to have this problem for my friend does not have to always use the USB headset.
Hello
Thanks for the detailed description of issue.
Please answer the following question:
What is the brand and model of the computer?We will define the speakers as the default output device and check if it helps.
Exercise the functions mentioned below to set the speakers as default:
a. go to Start and click on Panel.
b. click on her, then a new window will open.
(c) in the new window click on the tab 'Read' and
You can search for speakers and right-click in the window and click and click on "Set as default".For more information you can consult the Tips for solving common audio problems
I hope the above information helps!
Maybe you are looking for
-
'default to install the windows updates' I tried several times to install the updates of windows and it still says that 6 of them cannot be installed. There is a certain error code that appears from time to time, but I didn't write it. If someone cou
-
Several cameras for machine vision
We would like to use Vision Builder I do Visual inspection of our products. Due to the large size of the object, we might need several cameras to do this. Is it possible to use information from several cameras to Vision Builder or do I have to use se
-
Should I continue to use my with my Windows XP home SP2. When I go to update to SP3 and backup warning system is used. Exactly how to back up the system is not unclear to me and how do I know if the system is backed up? This maximum return system
-
When I boot I'm unable to log in I get a message stating that my user name or password are incorrect. I can then put the user / newspaper once guest account where I can then pass user and he then accept my user name and password. Similarly, when I c
-
Reference for Alienware 15 R2 drivers?
Recently, I bought an Alienware 15 R2. Being a player of PC for a long time, I usually get directly from nvidia nvidia drivers. Is this OK for Alienware laptops? Versions of Dell are usually far behind what is available at nvidia. Thank you Mike