Form of gain Bode Plotter

Similar Questions

• Bode plotter and transient analysis

  Hello

  I'm trying to generate a sinusodial wave and amplify it. From what I've seen on the scope my circuit works fine, but the bode plotter and the transient analysis do not work for some reason any.

  I have read some threads and guides online on without success...

  Can someone please take a look at my drawings and show me how to connect the bode plotter and transient analysis tool?

  Thank you

  A

  S.M.

  To get the transient analysis of work either set initial conditions defined by the user, or to zero.

  To get the Bode Plotter to work, you need to (temporarily) connect a voltage source to the point where you connect to the entrance.

  See the attached file.

• Bode Plotter problem

  Hello

  could someone explain to me why Bode Plotter shows nothing on this circuit?

  Thank you.

  Martynas

  I placed the resistance of very low-value series with L1 and now it works.

  

  

  Is this behavior of the circuit of the origin of this effect?

• T790 in PS 44: Plotter does not print along the width of the roll

  Hello Forum, we have a problem. I can't figure out how to get the T790 to print reliably with the longitudinal axis of the image on the width of the roll. I did a test-high 840 300 mm wide stripe and print it. Of course, I don't want to print an empty square three quarters with a small vertical strip of color, it's a waste of paper money =.

  Yet, I can not understand how to force the machine to the vertical axis of the image along the width of the print roller. On most printers, including our former HP plotter, Mac paper settings dialog box has defined "width" as "width of the roll. The T790 know that. No matter how to set the page layout, no matter how I orient the printed image, it always comes out print vertically.

  Is it maybe a bug in the Mac driver? Clues?

  TIA

  John / Bauatelier

  Hello Mike,.

  We have solved the problem recently, I had not had the time to post the answer.

  There is a setting buried two deep dialogue-pages that overrides the paper size and force the page to be drawn in a particular direction - exactly what we have been see. I disabled it and now it works fine.

  Thank you

  John/Bauatelier

• The amplitude of the frequency. Bode CD. State space

  Hi all

  Gently, I have a simple model that gives me a Bode phase and magnitude, using the block 'CD Bode'. AFAIK, this block takes the representation of the State space and assesses the frequency and scale of the system.

  Can I change the value of the Phase or amplitude Bode? by means change the input signal that bode uses to evaluate the response of the State space?

  Note: The entry, I want to say here is the value of the sinusoidal signal that Bode uses to give the phase and the amplitude of the State space.

  Thank you

  The works of Bode CD functions as a "sweep" of all frequencies and who you are. The algorithm is not a frequency controlled, he comes back the entire spectrum. You can't just get a specific frequency. However, if you use the fuction 'Assess frequency of CD', you can provide the model and frequency, and this will give you the specific Mag/Phase for this frequency. This example shows how to do this in LabVIEW:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2014\examples\Control and Simulation\Control Design\Time Analysis\CDEx Lin Simulation and stable State.vi

  Now, if you want to 'form' your frequency, so you can create another model, connect with each other and try to change the output frequency. This example shows how to do this:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2014\examples\Control and Simulation\Control Design\Frequency Analysis\CDEx frequency analysis

  If you just want to "simulate" the response of the signal to a specific sine wave, then you will need to you another function in the time domain palette called "linear Simulation CD. With this, you can generate a specific sine wave and you can see his behavior in the time domain. Here is an example:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2014\examples\Control and Simulation\Control Design\Time Analysis\CDEx sine wave with Mathscript.vi

  Hope this helps,

• Graphic cursor size does not respect the Bode plot

  Hello

  I was wondering if someone would be able to shed some light on a problem I'm having about a graph XY cursor.

  I developed a simple VI to determine the characteristics of a low-pass filter through which a sinusoidal signal ramp frequency and subsequently followed the gain of the filter to create a Bode plot.

  Through the analysis of the curve of Bode I want to determine the cutoff frequency of depression go the filter under test. I introduced a slider in the chart and using a property node I have hoped to set the cursor to-3dB point in the Y axis and the corresponding sliders X post thus determining the cutoff frequency of the output filter.

  However the slider seems never to follow the plot beyond the first stage of the loop. It feels as if there is a break in the conspiracy between the 1st and 2nd iteration of the while loop used for the ramp signal generator.

  I tried to find why the cursor won't follow the plot at-3dB, but so far I am confused.

  Any help or advice you could provide would be greatly appreciated! I have provided the attached VI for clarity.

  I corrected your VI.

  First of all, you need to put the property node AFTER the while loop, because you need the chart to be done first and then watch the cut off frequency.

  Secondly, in LV, property nodes are read from top down. So you have to move the cursor to Y =-3 first, and then read the X position.

  I have attached the corrected vi

• Replace control & Simulation default control plots (Locus of Bode/Step/Root) with the controls of the money

  I just installed the evaluation version of LabVIEW and LabVIEW Control Design and Simulation Module 2013. Normally, for the design of command I only use Matlab/Simulink but LabVIEW has some advantages and I want to enjoy these benefits. The problem, I think it's boring, it's that I can't use the money controls to change the default control style classis - like bode gain and track of lotus of margin or root below phase

  

  Hi muahang,

  Why not? What is the problem here?

  These plots are like XY graphics standards (maybe with graphs from bottom fantasy for the locus of the root)...

• documentation error: convert the PID Gains

  There is an error in the documentation for the Convert PID Gains VI. In the table explaining the calculations for the parallel form, the documentation says (Ki = Ki') but the calculation of the VI is Ki = dT * Ki':

  

  nathand,

  I filed 595523 CAR to solve the conflicting equations.

  Daniel C.

  Technical sales engineer

• Reports and forms Oracle 12 c

  Hello

  It is nice to see again Oracle 12 c similar as Developer 2000. I have a few Questions can you please help me understand.

  1. how to Setup Oracle 12 c forms and offline on laptop computer with the operating system Windows 10 as independent when away from server to develop forms and reports.

  2. time Oracle Forms 12 c and reports are installed on Windows Server 12R2, how the desktop users will gain access to forms.

  Sandy

  First, I will begin by saying that Windows 10 is not yet a certified platform.  Therefore, if you decide to use it, understand that some things may not work properly and Support of Oracle isn't able to help you.

  Second, it is recommended that you read (or at least review) the product documentation before diving too deep into what either.  Many of the likely questions will be answered in the docs.

  FMW12.2.1 product certification:

  http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1221certmatrix-2739738.xlsx

  Forms and reports 12 c Documentation Library:

  http://docs.Oracle.com/middleware/1221/formsandreports/index.html

  About your comments, here are my comments:

  It is nice to see again Oracle 12 c similar as Developer 2000.

  I guess you are referring to the fact that v12 now offers a "Form Builder Only" installation option.  This option installs the form builder and related utilities. It does not install runtime components.

  How to configure Oracle 12 c forms and reports on the laptop with Windows 10 system of independent when operating away from server offline to develop forms & reports.

  As mentioned, the Win10 is not yet supported, so consider that Oracle Support may not be able to help if problems arise.  If you have decided to install the generator option of form only, developers need to access remote servers in order to test their applications.  As would be the case if you have not installed a database on the developer's computer.  If the developer machines are not connected to a network, it will be necessary to have a database and complete installation of FMW on their machine in order to run the applications they develop.

  Once Oracle Forms 12 c and reports are installed on Windows Server 12R2, how the desktop users will gain access to forms.

  I'm not sure that understand this issue.  If you're referring to end users (not developers), it's the same accomplished as it has always been in the past. For example:

  http://remoteServer:port/forms/frmservlet? shape =

  More on how to do to run a form is covered in the documentation that I mentioned above.  Specifically, see the Oracle Forms (Chapter 3) Deployment Guide.

• Links auf Seiten create .pdf gained therefore

  Hallo zusammen,

  ICH möchte (SO SO LIKE) as meine Ubersichten in MS Office programs links create, welche mich direkt auf eine Seite eines .pdf bringen gained therefore.

  ICH habe're schon mit wurden und Ankern usw. tried, bin aber auf keinen Grünen path point. ICH nutze Adobe Acrobat XI Standard und would die as like multiple links Office Anwendungen benutzbar. Hauptsächlich aber as OneNote. Die Dateien liegen both Friday auf dem Firmeninternen Server und sollen nur über die respective Office application und nicht über den browser erfolgen.

  As professional eure Hilfe besten Dank!

  Grüße

  Tobias

  There are two ways you can use these 'open settings': as part of a URL when you load a page from a web server and as part of the Acrobat command line. What you're trying to do is to use a local path (such as it is the most simplistic form something like "c:\file.pdf"). You cannot associate a local file using just the path and open settings of openness.

• Audio gain of 14 items control

  Program hangs during immediate playback when the volume is adjusted or fade introduced via right click in the audio 1 chronology.  Can be overcome for volume through audio gain in the menu clip and using crossfade transition to fade, but the former, in particular, takes more time. A track in the timeline of the music can be set without any problem.  In addition, a project published in 10 items and opened in 14 doesn't have the problem.

  What is the reason and the solution?

  rogerl

  14.1 update details have been put online. Before you download and install, please check the details.

  http://blogs.Adobe.com/contentcorner/2015/12/18/Adobe-Premiere-elements-14-1-update/

  I agree with you to postpone using this 14.1 update so that you do not feed another variable in the mix at the moment.

  Change the preferences/Menu/Audio ASIO of material, there is an entry and exit tab. In my case

  Entrance - checkmark Microphone (Realtek)

  Output - speakers (Realtek High Definition) Audio.

  You say that your audio is characterized by 5.1 channels.

  As a mini test, open a new set of project and guide the project preset to that described for the 5.1 channels.

  In your case,.

  Menu/new/project to modify the file.

  PAL

  AVCHD

  AVCHD Full HD1080i 25 5.1 channels

  Then import your video with 5.1 audio channels and determine if there are still problems with the audio.

  If no crashes, we'll explain further.

  Any questions about the foregoing, please ask.

  Thank you.

  RTA

• Have the form of meeting disorder using SOUL of PBS

  I have worked with our local PBS affiliate sent a monthly programme which we create and deliver on DVD for a few years.  Recently, they have requested that send us the episodes in the form of a video file instead of a DVD and I can't find how to create a file that meets their specifications.  We are shooting on Panasonic HMC150 AVCHD 1080 60i cameras and editing in first Pro CC 2014.  Here are the specifications that the station sent me:

  HD FILE

  Video format: 1080i 29.97 FPS (59,94 fields/sec) HD

  File format (s): XDCAM 1080i/60

  • XDCAM HQ: 4:2:0 to 35 Mbps MXF (OP1A, independent)

  • XDCAM HD422: 4:2:2, to 50 Mbps MXF (OP1A, independent)

  • Video Codec: MPEG-2 Long GOP, Sony XDCAM line

  • Order of fields: Upper first fieldwork

  • Audio format: sampling frequency of 48 KHz, uncompressed

  • Reference tone:-20dBfs

  • Its functional level: program Peak levels at 07:48 dBfs, nominal - 10

  • When a GIVEN weighted based on the meter is calibrated so-20 dBfs your 0 is SEEN, peaks of program should way 0 SEEN so.

  I can easily using SOUL to set the codec, container, field order, and audio format.  However, I don't know what they mean by reference your level of functioning and the last sentence on "a VU-meter weighted.  Can someone please help me understand how I can meet these last three requirements?  I'd rather not have to ask them because they are extremely busy, so I hope I can get assistance here.

  Thank you!

  Mike Silverman

  Maximum audio level that can be obtained with digital media is 0dbfs (full scale) anything less maximum is expressed as a negative DB number.

  The specifications that they gave you are a holdover from days of delivery of Ribbon, but many cable channels use these specifications.

  Reference note. At the beginning of the program is usually 30 seconds or more (the real position of length and time code of these often makes part of the spec.) section bars and tone. First to generate these bars and you have the choice of type SD or HD. The tone that generates the first is at-12 dB so you will need to change its gain - 8db to-20, make a click right-Audio gain-setting gain of-8.

  Peak of program levels. This is a holdover from days analog tape where the mod could not go above to - 10 dB (maximum level on a PPM meter) If you put a limiter in the master in the track mixer and set it to-5 dB, it should be all right.

  Pics program. It's asking for the average level of the program at about the same level as the tone. This has now (in first CC) was replaced by loudness metering. On the monitor of loudness - 23db and play the whole of the program, it should be in a db about-23. Adjust the levels to make it correct.

  That being said, you have been offering a file dvd-based program, it's just the media that you change. If they accept the sound of the dvd, they should have no problem with the alternative bases.

  Others were quicker to type than me.

• Select the list in tabular form

  Hi all
  APEX Oracle 11.2 4.1 using SE (Oracle Linux Server release 6).
  
  I have a Page with a region based on a tabular presentation.
  The query Source in the region has several columns, including an id I have also added a DATE column and a column of "Buttons" that appear on all ranks.
  The extra DATE field is displayed as a list select a named LOV.
  The extra button field appears as a standard report column and has the link column attributes that cause a branch to another page when you press.
  
  I want to make is that when the user presses the button on one of the lines, APEX defines two elements of application before going to the new page:
  1. the ID column of the line in which the key has been pressed
  2. the value currently highlighted in the select list, for the line in which the key has been pressed
  
  Using a link of #ID column element value # I can successfully get their hands on the ID column for the line concerned.
  But do the same thing for the select list column invariably returns by default in the Select list (i.e. the value initially selected). It does not pick up the change if the user has entered in the select list and chose a different value.
  
  Can someone advise how best to gain the value selected in a Select list in a tabular presentation?

  This approach works:

  1 make sure you have unique names for the id on the elements of the apex for example. in the use of sql, something like:

  ID = f02_' | rownum

  2. Add a hidden column in the form of table containing the rownum (named p_row in this example)

  3 put the URL of the link column:

  JavaScript: Window.Location.href = ' f? p = & APP_ID.: 49: & SESSION.: P49_EMPNO, P49_DEPTNO: #EMPNO #, ' + $v('f02_'+'#P_ROW#');

  example of

  http://Apex.Oracle.com/pls/Apex/f?p=579:48

  If you need SSP then you will need to send the page by using the apex.submit function and a PLS process to prepare the URL and branch

  See you soon

  Shun

• Column Salary to come in the form $ does not time?

  Trying to get this works, but can't. Help, please. You will need to get the column Salary to come in the form $ instead of the time. Whenever it is multiplied by 12, it ends by multiplying by time and not by $12. So I'll take 48 h 0 m instead of $48. There are some pictures of what I am trying to accomplish. There's a picture of what is happening and another pic of my formula before you enter the time in time and get the product duration under treatment. Help, please. Thank you

  

  

  E SALVATION '

  You multiply at a range of a number. The result is lasting. That makes sense, if you do 15 minutes (duration) of exercise every day for five days (number) you have made 1.25 hours (duration) of exercise.

  For a numeric result, you need to multiply a number (hours) by a number of $ / hour. Your friend here is DUR2HOURS, which converts a duration in a number representing the number of hours:

  

  Kind regards

  Barry

• Alternative text is more work for safari forms

  I upgraded to MacOs Sierra yesterday, and substituting Text does not work as it did previously. Specifically, it no longer works on most forms web safari. Is this a bug? I tried to disable and re-enable it in the preferences system, as well as within safari itself (Edition-> substitutions) but it still does not work. Am I missing something?

  It's a piece much missed feature and not limited to you, mjg_nyc. I have the same problem on a MacBook Pro retina and iMac. The two people that I just talked to AppleCare present the same problem too. I don't know if it's the Apple software or a new web protocol that prevents it being used, but there must be a way to make it work again.

  Please can anyone who reads this comment to apple via their online form - only with sufficient numbers will be do anything about it.