Format a number with a decimal number to display the value, but not the comma

Similar Questions

• My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network.

  My Windows XP home edition with service pack 3 now displays the status of my absorbing as "State of the network" wireless network connection but never connects to the network. This started after my last Microsoft update has been installed. .

  original title: status: network address acquisition
  Hi BKlap,
   
  Try these methods in the order.
   
  Method 1: Repair the network connection to solve the problem.
  For more information, see:
  To force a network adapter to acquire an IP address
   
  Note: The information in the article applies to Windows XP Home Edition as well.
   
  Method 2: Follow the steps listed in this article to resolve the problem:
  How to troubleshoot connectivity TCP/IP with Windows XP

• How to round a number to a specific value and not to a certain number of decimal places

  Hello

  I'd round up the numbers according to a grid.

  Let's say I have a grid of 6 between 3 and 4 (3.0 3.2 3.4 3.6 3.8 4.0)

  I'd round up to the nearest number in the grid, so if I choose 3.7125, it will turn to 3.8.

  I found already in the forum how to round decimal degree, but not in my approach.

  You know to force rounding to the nearest of the grid.

  I thought a ramp up to make the grid then interpolate the number and use its index to round. But I don't know that there is a much easier way.

  Thank you

  Zied

  These ideas, everything seems to work if you try to round up to a set of specific values.  But you must set specific values for all the possibilities.

  If you want to round to a given interval, there is an easier way to do it.

  If you want to round each 0.2.  Divide your number of this interval.  Round to the nearest integer.  Multiply your number of this interval.

  

  If you need to force a number less than or greater than a given to be in this range, such as having range 1.255 round up to 3, then put a stove and Coerce before or after this piece of code.

• Showing results with one decimal two. Force the decimal.

  Hello

  Im a simple computing of writing device.

  You enter a digit, press one of the two buttons to multiply by a number, and then the result is displayed. The result is copied hide the result from the button you press on and visa versa.

  I'm having a problem to display the result with a decimal point two constant.

  I'm using strings and so do not know how to do this.

  Here is my code:

  import flash.events.MouseEvent;

  restrict entry to only numbers textfield

  txtInput.Restrict = "0-9";

  restrict the input textfield only a two-digit

  txtinput.maxChars = 6;

  event listeners

  btnW.addEventListener (MouseEvent.CLICK, WHandler);

  btnC.addEventListener (MouseEvent.CLICK, CHandler);

  btnW.addEventListener (MouseEvent.CLICK, hideC);

  btnC.addEventListener (MouseEvent.CLICK, hideW);

  functions

  function WHandler (e:MouseEvent): void

  {

  calculation of white

  var answerW:Number = Number (txtinput.text) * Number (0.90);

  txtWResult.text = answerW.toString ();

  }

  function of CHandler (e:MouseEvent): void

  {

  calculation of the color

  var answerC:Number = Number (txtinput.text) * Number (0.99).

  txtCResult.text = answerC.toString ();

  }

  function hideC (e:MouseEvent): void

  {

  Hide the result color

  txtCResult.visible = false;

  txtWResult.visible = true;

  }

  function hideW (e:MouseEvent): void

  {

  Hide the white result

  txtWResult.visible = false;

  txtCResult.visible = true;

  }

  After having had a look online I found these two resources:

  http://helpx.Adobe.com/Flash/KB/rounding-specific-decimal-places-Flash.html

  and

  http://StackOverflow.com/questions/11469321/decimals-to-one-decimal-place-in-AS3

  But I'm confused when combining these techniques with ropes.

  Any help would be greatly appreciated,

  Thanks in advance

  Mr B

  Use the toFixed() class number instead of the toString() method.  The result is a string that contains the number of decimal places you specify.

  var answerW:Number = Number (txtinput.text) * Number (0.90);

  txtWResult.text = answerW.toFixed (2);

  var answerC:Number = Number (txtinput.text) * Number (0.99).

  txtCResult.text = answerC.toFixed (2);

• I just downloaded a new version of flash, and now I'm having a problem with web pages. Load loads of Facebook, but not images. Also no videos don't load.

  I see no longer images on some Internet sites. When I downloaded the new flash, all sites had no image on any website. Yahoo came with just writing. I changed the encoding of characters at Universal and now Yahoo has images but Facebook load with none, just a white screen. Videos YouTube don't play, either

  Clear the Cache and Cookies

  • https://support.Mozilla.com/en-us/KB/template:clearCookiesCache

  Clear the Cache of the network

  • https://support.Mozilla.com/en-us/KB/how%20To%20clear%20The%20Cache#w_clear-the-cache

  Troubleshooting extensions and themes

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

  Check and tell if its working.

• Firefox manages not to display images much (but not all) on the Web sites that I visit, certain images are displayed and some are not even if they are in the same format.

  I recently changed my ISP because I had connectivity problems. Especially my router would be closed sporadically. As part of my attempt to identify issues, I ran some spyware that I was told that I could trust. Since then, I have a problem looking at many websites as much (but not all) images are missing, even on websites that I know very well, including my own. What is odd, is that on one site each page has an image jpg under the navigation bar and all these jpg appear except for one who does not even appear when I reload images. This problem also makes security of sensitive sites as my amateur full site look Bank that scares me. The problem does not occur on other web browsers.

  What spyware software do you run?

  Make sure that allow you pages to choose their colors and you have not enabled high contrast in the Windows accessibility settings.

  • http://KB.mozillazine.org/Website_colors_are_wrong
  • http://KB.mozillazine.org/Websites_look_wrong
  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load

• What should I do when I can communicate with my instrument NI MAX through other programs, but not of LabVIEW?

  Hi all, this is a question that I had a few times before in one form or another.

  I use a Boxcar Integrator (245 SRS is the interface) for my experience. I connect to it via GPIB using my Agilent GPIB/USB interface. My program runs in LabVIEW, and I used it successfully in the (very recent) past.

  However, sometimes if I get LabVIEW or something, some weird stuff starts past trying to connect to it. For example, after the LV exit and go back to the top and any attempt to run my program, it throws the error:

  Error 1073807339 has occurred in the CITATION read in OR_Boxcar_ReadAnalogPort3.vi-> OR_Boxcar_SimpleTest.vi
  
  Possible reasons:
  VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete.

  Which essentially means that he cannot connect for some reason or another (don't worry, I'm on the right GPIB address).

  So I go to equivalent NI MAX or Agilent (Keysight connection Expert), proceed to part communication from VISA to either and manually, connect with the machine. And it works! If clear my computer is communicating with the machine at this point, but not of LabVIEW.

  This could be the cause, and what I might try? Thank you!

  Oh shit, I forgot about it! I solved the problem, it was actually a 'me' problem is not a problem of LV. Even my solution would not be to help someone else who finds it. I was trying to read from my instrument, but it is in synchronous mode, so it generates an error if you try to read her when a data point has not been loaded in its buffer. I did something unusual, so it was not a point of data loaded into its buffer.

• I send you emails as usual with windows live hotmail, now they are sent but not received?

  emails

  I send you emails as usual with windows live hotmail,.

  now, they are sent but not received?

  Your question is related to hotmail and would be better suited in the Windows Live hotmail Solution Center, where one of the experts in this area would be better suited to offer you a solution.

• I need my serial number to display the document - I bought and downloaded the software online

  Hello?

  Hi a frase,

  Please visit this link: http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  Kind regards

  Ajlan Huda.

• How to tour calculations with two decimal places (scaling of the form)

  Hello

  I created an order form where customers enter the amount of product that they want to order and the form shows the total amount payable (including transport and sales tax). According to the user input, the amount total resulting sometimes contains more than two decimal places. How do I turn calculations to two decimal places? Is it possible to do this form on the scale?

  I'm new to using Acrobat for calculations. Any help would be greatly appreciated! Thank you...

  This should be:

  Event.Value = util.printf ("%.2f", event.value);

• I want to format my hard drive, I have Windows XP Home product key, but not drive.

  Is there anyway that I can format my HDD without the disc? As indicated, I still have the product key.

  You must contact your computer manufacturer to see if there are any available recovery disks. Another option would be to buy from a reliable source. Several times shopping online disks can be counterfeited or contain malware.

• I have a hp laptop that I forgot the password. I tried to reset with a USB key that I just bought but not luck. Any suggestions

  I have a hp laptop that I have forgotten the master password. He says that I am not connected to my wifi too. Any suggestions?

  Hello

  You need to do a password reset disk before you forgot your password, not later.

  "What to do if you forget your password in Windows Vista"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your password Windows Windows 7"

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your password Windows 8/8.1"

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  f you forgot your password for Windows, there are several ways to retrieve or reset:

  • If your PC is on a domain, your system administrator must reset your password.

  • If you use a Microsoft account, you can reset your password online. For more information, see the Web to reset your password page.

  • If you use a local account, use your index of password as a reminder.

  If you've tried these suggestions and still unable to connect:

  • If you have Windows 8.1, you will need to reinstall Windows.

  • If you have Windows RT 8.1, you will need to contact the manufacturer of your PC.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  http://support.Microsoft.com/kb/189126/en-us

  Tools third password

  Some third-party companies claim to be able to bypass the password that have been applied to files and features that use Microsoft programs. For legal reasons, we cannot recommend or endorse any of these companies. If you want to help to break or reset a password, you can locate and contact a third party company for this help. You use these third-party products and services at your own risk.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon

• Format for number fields mask of

  Hello
  What is the format mask to use for the data number fields to display in the format 999,999.00
  
  Thank you
  Suresh

  Suresh,

  In the format mask * 9 * if there is no number means he will leave empty, and * 0 * means it will show the number * 0 * if there is no number entered.

  Therefore, set the format mask FM999, 990.00. This will display the * 0 * as * 0.00*

  Kind regards

  Manu.

  If my response or response from another person was helpful, please mark accordingly

• TIFF file format? Conflict with Quick Time, with my HP C6150 cant print

  Unable to print Document in Format of TIFF with my HP Photosmart C6150, somehow the default values of the documents in a Quick Time program which is on my Windows XP computer.  Quick time came from Apple and I need to sync my I phone, however, whenever I have loag in one site to download and print a text document that is in Tiff format this Quick time keeps coming back.  Called Apple, but they told me do not remove QuickTime or my I Phone not symc.  Can someone help me fix this, I'm not smart on computer so need for detailed directions or someone I can call to get more direct instructions if I have a phone number. I live in Alaska there will be a change in the weather.

  Thank you

  sjvozar

  Thanks for your help.

• Reg: Replace the comma with newline

  Hi Experts,
  
  I am a little confused and stuck with this... Tried many things but not able to do it properly.
  Any help is appreciated... TIA.
  

  -- "Input"
  with xx as(
      select 'x,a,(b,c),(d,e),f,g' x
      from dual
  )
  select * from xx;
  
  -- "Expected Output"
  x
  a
  (b,c)
  (d,e)
  f
  g

  Database version: Oracle 10.2
  
  Vanessa B.

  I gave you this already above.

  with xx as(
      select 'x,a,(b,c),(d,e),f,g' x
      from dual
  )
  , xxx as (
   select
     regexp_replace(x, '(\([^,]+),([^,]+\))', '\1'||chr(1)||'\2') x
   from xx
  )
  
  select
   replace (
     regexp_replace(x, ',', chr(10))
    ,chr(1)
    , ','
   ) x
  from xxx