format changes and odd on the insertion of page
Hello
I'm carrying a book. I have facing pages set up in my model. The even pages and odd pages each have different formats, with a larger inside margin to allow the link.
Insertion of a single page of new forces all even pages become odd pages and even odd all odd to become that breaks the formatting.
How can I fix?
Thank you very much!
If you use facing pages, you add pages in multiples of two. If necessary, use a blank page.
Tags: InDesign
Similar Questions
-
Original title: cannot switch on Windows XP users
My problem started on December 3, 2011 when I left my computer for lunch. When I came back, my screen saver was. He asked me to enter my user account password to log back, it does not take me to the Welcome screen. Then I entered my password and logged on. I tried to give to fast user switch, but when I click on save changes and go back, the box isn't here.
My systemOS: Windows XP ProMedia Center Edition
Version 2002
Service Pack 3If the system restore didn't help, use the line 34, left side of the http://www.kellys-korner-xp.com/xp_tweaks.htm
-
computer crashed, used the backup to restore, formated instead and charged to the State of origin, no chance to recover lost photos at this stage?
Hello
It is a good free program to recover data. but no guarantee.
http://www.Piriform.com/Recuva
You may need to contact the data recovery specialists, who are very expensive.
See you soon.
p.s., You use your computer, the less chance you have of data recovery.
-
I use windows 7. How to change and be sure the default column width in Windows Explorer
I use windows 7. How to change and be sure the default column width in Windows Explorer
Hi Jimsw,
· If it works well before?
· You did changes to the computer before the show?
Explorer Windows will remember changed settings, check if this not happen as planned.
Follow the suggestions below for a possible solution:
Method 1: I suggest running the fix of the article and check if it helps.
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Method 2: You can increase the width of the selected columns and apply the settings to all files and check.
a. right click on an empty space in the Windows Explorer, click on sort by.
b. now, enter the size required in the Pixel with and click OK.
Now, click on the drop down menu to organize and click on folder and Search Options.
Click view and click apply to folders and click OK.
I hope this helps.
-
How can I get my Hp officejet 6700 to print the date and time on the fax confirmation page
How can I configure my officejet 6700 premium to print the date and time on the fax confirmation page?
Hello
As long as the date and time is set, it should automatically appear on the print.
Is the date and time set correctly on the printer?
-
Followed lead changes and deletions via the API
Hello
We use the API block for extract contacts and records every night for the storage of data. For now, enter us all the records where the field of creation or last update happened the last time sync ran. Since a large number of areas (e.g. partitions) are updated, which seems to result in almost a full (slow) re - sync every day. Also, that leash not does any way to identify that were deleted to Eloqua, then we can also remove it from our warehouse. Is there a better way to do it? It doesn't seem like there is no available activities representing the field changes or deletes Records unless I'm missing something.
Thank you
Shane
Hi Shane,
Unfortunately at this time, the only way to draw from these data is the date of last modification, which as you know is updated on the update of any field. Subscribe to specific field changes and destruction Records are things we look for in the implementation via the Firehose API, however, there is no firm plan in place yet.
Thank you
Chris
-
Cannot drag and drop into the bar of pages in Acrobat Pro XI for Mac?
MAC OSX 10.7.5
Acrobat Pro XI
In adobe Acrobat XI for Mac, how do I drag the pages of thumbnails of Pages box in the finder and make a new PDF?
In windows I can simply select the pages, drag and drop them in Solution Explorer and creates a new PDF pages that I dragged. I've tried everything on my Mac and I can't extract this way.
It is extremely slow and frustrating to have to manually right click Extract, select pages, open in a new window from adobe, and then save the file in the menu.
On windows, I just select the page, drag to the folder and click Rename.
The same question and found the solution, the wire https://forums.adobe.com/thread/1348512 try67in response
To zoom back, so that the entire page is visible, then drag & drop works fine, well, at least, it worked fine with me.
I admit, it is odd though.
=
-
Problem with the insertion of Pages
I have a large PDF (1800 pages) which is a mixture of created acrobat pdf and pdf provided by other companies who can use othe products.
Everything was ok until Friday when I try to insert 10 pages in the location of the page 1265, when I ask him to insert the document he put the 10 pages futher in the document, which, once I attempt to move this translates their move further down the document.
No matter what risks what this might be or how fix it
Thank you
Mark,
It sounds as if there is a corruption in the document. If you cannot recreate the document, you can try to refry the document by printing to PDF. Which will result in a lower quality paper, but it doesn't have the error that you have a problem.
-
Comments and questions about the mixture ADF Page flows with Trinidad UI
Hi all
I did a few tests to see how possible it is to use Trinity to the UI (for compatibility of this stinking IE 6) as well as the ADF Page flows / controller of the ADF. My question is whether there is a sustainable configuration from the point of view of Oracle. I did things to make it work and noted the following interesting behaviors (call anaomalies, if you wish):
(1) addition of ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well.
(2) if I remove the ADF Faces DURATION 11 project library and create a page of trinidad (also set up the renderkit and as appropriate skin and remove a moment-false ServletADFFilter of web.xml) I get errors MDS when running the resulting page. I can't correct the error by removing the MDS libraries either - as soon as I put ADF Faces DURATION 11 library back, things are OK.
(3) since I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either.
(4) an interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the link/button to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true.
So, in summary, I seems to be the controller of flow/ADF Page ADF working with Trinidad, with a few minor problems of productivity due to an obvious requirement to have the Library Runtime of ADF Faces and the extent of technology ADF Faces included in my project. Now Oracle - is this going to be a sustainable configuration?
I'd also appreciate comments, suggestions and comments from anyone else who has tried or is trying to use the ADF Page flows / ADF controller with a single user Trinity interface (well, in my case, I'm going to blur more using the tag af:template with components of the Trinity, but it's another whole story).
Best,
John
bump #2+ 1). Adding the ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well. +
ADF task flows have to ADF Faces e around. Not sure this is documented somewhere, but I hope it's
(2) no idea about it
+ 3). Since that I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either. +
Looks like that is facing an emergency room to have an option in the dialog creation page if create an ADF or page of Trinidad. I'll take a note
+ 4). An interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the button/link to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true. +
I'm not sure how to restrict we are on the "do not use" them in combination, but to me this looks like a bug.
Frank
-
Firefox updated as I wanted. Now, each I reopen the application is going through the screen of loading/updating before the opening of Firefox. When she opens the Firefox update page loads. I emptied everything (cache, connections, history, etc.). It will not stop. I hesitated uninstalling and reinstalling because it isn't always re - import settings, bookmarks, etc.. Love this browser and all software you provide.
Hello Paul,
You should look at this article on this specific issue and Preferences not savedarticle. It could be a problem of pref.js. It should give you all the information you need!
If this does not work:
- Enter about: config in the address bar
- Click I'll be careful, I promise you if prompted
- In the filter field, type Startup
- Double click on startup.homepage_override_url
- Delete the text string, and then click OK
- Close Firefox and reopen the window to check that it worked.
Hope this helps!
-
and a message that says "the website has encountered a problem and cannot display the page you are trying to view, etc.
Download Windows XP Service Pack 3 from http://www.microsoft.com/downloads . You can not access the updates Windows XPSP2 or XPSP1 longer.
-
See link and navigate between the problem of pages...
Hello world! Hope someone can help with my problem. DB, I have a table with information on employees and employment. This one table I did an OS where I did 2 VO - EmployeeVO and JobsVO. I connect these two VO with ViewLink - EmpJobVL (realtionship 1 to 1).
Then I created 2 .jspx pages. In a page I droped EmployeeVO but on the second page I droped JobsVO. I put the button with which I can navigate between these two pages in the page template.
The problem is when I start my employee page and navigate to the correct folder with the 'next' button and then try to navigate to the jobs page and then in the jobs page I can't see correct record. I still see everything first save. Why this is so and what can do?
Hope that someone help me,
Best regards, Debuger!Hi Debuger,
No probs, you can keep your Jspx so u just have to clean your PageDefs... More fight urself its such an easy task...
Remove all entries def of your page and then have a copy of your jspx coding in a notebook that also remove...
Drag your def jspx and page a new re-make your your and paste your new jspx encodings
your your get binded automatically... :)Kind regards
Suganth.G -
Date.MinValue to format date and time in the MAF
Hello
For the amx:inputdate component, I want to display the date and time format. I need to be able to select the date and time.
Can someone help me please in obtaining it. If items available, please share me.
Thank you
Rita
If you just want to show the date or time, or both, then you change the attribute 'type' to date. MinValue
To date. MinValue on iOS, a native component selector is used for this purpose. On Android, there is a date component. MinValue AMX used.
You can check the link below for how it will look like
https://wikis.Oracle.com/display/ADFMobileDesign/component+-+input+date
-
Windows 7 Sp3. using Firefox 7.01
Non admin users.
Home page change to what they want and it can work.
BUT when they close firefox and open it again the home page goes back to the default settingYou have a (security) installed software that can restore files when starting?
See:
-
If I open a new tab and type a url in the address bar tab load very well. When I return to an already open tab, the tab looks fine, but the address bar still shows that last typed url, not the url of the 'active' tab I do not see the url of the active tab and I can't use the "return", "Refresh", etc...
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
Maybe you are looking for
-
I opened a Web site of the library without specifying "in a new tab. I expected to crush the existing active tab. Instead, he opened in a demi-fenetre on the left, without tab and without all the icons "Min/Max/Close. I can not close it even by resta
-
It's REALLY annoying- The workaround is obvious but a lot of time
-
question for acer a1 - 810 kikat 4.4 update
I received a Herald says I can update android 4.4 but when I choose the update, it says I have not must the storage, there are about 180 MB but I still free of close to 3 GB in my storage.and when I go to setting and touch "system check" this market
-
Vista Windows - avast boot scan - I remember way back that I had some kind of trouble with zippers. What should I do? I was going to remove anything to do with closure zipper and start over, but maybe this would have caused a lot of problems? I have
-
I need a recovery disk for a Pavillion DV9000 running XP media center edition
I can't find a HP web site.