Format for playback of video clips from the SD card

Similar Questions

• My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  My computer crashes whenever I try to play a video clip from the internet. I have to disconnect the plug to escape. What can I do? Thank you

  There is a lot of noise from speakers as well.

  Disable the hardware accelerator or install flash player 10.

• U2414H DisplayPort 1.2 STD Set Up - monitors will not get video Signal from the graphics card during start or restart

  * What specific Dell monitor? 2 two U2414h monitors with MD214 - package of multi-monitor support
  * What specific model of computer, desktop/laptop? Workstation HP xw8400, Intel Quad Core Xeon CPU E 5335 @ 2.00 GHz, 4.00 GB of memory
  * What operating system? Windows 7 Professional 32-bit
  * Which video card? AMD over-pants V3900
  * Which ports are available for the video card? DisplayPort 1.2 STD, Dual-link DVI
  * Which video output from the video card port video on the port monitor do you use? Output Mini DisplayPort Display port in
  * What cable are you using to set the video card to the monitor? Adapter DisplayPort to MiniDispayPort - we came with every Dell monitor
  * You use the Dell supplied cable? Yes - two monitors

  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. This resolution should match the resolution of the default monitor. The two monitors: 1920 x 1080, 60 Hz

  * Brief description of the problem monitor? Monitors have been implemented following the instructions on page 25 of the Dell online manual to connect the monitor to function DP multi-flow (MST). DisplayPort cable is connected to V3900 output MiniDisplay port DisplayPort graphics card in the 1st U2414H; second DisplayPort cable is connected to the DisplayPort on 1 U2414H monitor output and MiniDisplayPort in the 2nd monitor U2414H. Dell U2414H drivers have been installed from the CD provided and both recognized by Windows. V3900 graphics card Driver is up to date with the EyeInfinity software. Source of input on both monitors the Mini Display Port value. Display settings on both monitors Display Port 1.2 value activate. Resolution of the screen on Windows 7 shows: (a) two separate Dell U2414H (mini Display Port) screens, with each resolution 1920 x 1080, multi (b) displays the value "to extend these displays. The two views work with Setup leading up to and acknowledged by the graphics card.

  Problem 1 - all the time - monitor power buttons are lit, the computer is turned on, then monitors lights don't - they show 'Power save mode' and then turns off. To hit the power button on the computer to shut down Windows. Only way to get these on monitors is unplug cords from the back of each monitor, wait a few minutes, plug in the power cord, start computer and then both monitors will start up and sign of windows to the screen will appear and monitors will work. Normal operations for a full day of work if you do not restart. If you need to restart during the day (like when you get a software update), the same thing happens. Start the computer to restart, but the monitors come back on not and remain dark. There is nothing wrong with the graphics card V3900. He is certified by AMD and DisplayPort.org to work in an environment of STD DisplayPort 1.2. I had previously two 215tws Samsung SyncMasters connected to each output V3900 Grahics card and they work very well in extended mode for years until a SyncMaster 215tw started shaking like crazy. A SyncMaster has been connected to the out display with a dongle and a DVI cable Port. The other SyncMaster was connected to the DVI output on the graphics card. So I decided to buy these two U2414Hs. Technical support Dell after many phone calls and e-mails finally advised me that there is a problem of "compatibility" between my computer and the U2414Hs and recommended that I return the monitors. On the web site of the U2414H AMD has not been certified by AMD to work in a DisplayPort 1.2 STD Set Up. Other former Dell monitors are certified by AMD to work in the Display Port 1.2 Setup. DisplayPort.org lists the U2414H to work with Display Port (it does not say that it will work in a DisplayPort 1.2 Set Up).

  Problem 2 - shift perceptible in the entrance of Microsoft Blue Tooth keyboard and mouse and PS2 Keyboard and mouse. All the drivers are up to date. When you type a phrase, it takes a few moments for the text displayed on the screen using a keyboard. Both the mouse connected and the Bluetooth mouse are unresponsive sporadically for a few moments until they finally react. It happens regularly during the day. The monitors provide excellent clarity when you work. The stand is ideal for office property. Before these monitors are returned if no one knows what causes these two problems and does anyone have a solution? Should I stop using the Display Port 1.2 and hang them using HDMI with active dongles? If I have to return these two U2414Hs, I considered the 2 two U2413s. Someone at - it all opinions on the last U2413s from Dell? I have read some real problems with ghosting that I just haven't the time for more. The remanence correction in the models of U2413 sold in 2014? There are very few monitors on the market with Display Port in and out to the back to support DisplayPort 1.2 STD Transport.

  Thanks for any input.

  I had to remove my VGA HDMI DV card and now the DP (display port) works very well. Don't need to use a HDMI cable. Display Port 1.1 is reported as the problem in order to remove the card solves this problem.

• I can't import video clips in the timeline. Import clips from video al chronology of first CC,

  I have a problem. I can't import video clips to the timeline, it is important only audio. I have hand appears locked. How should I do? Thank you!

  I have a problema. No puedo import clips from video al chronology of first CC, solo importa el audio. Me appears the mano locked. How solucionarlo? Gracias! @

  Hi Albert,

  Please visit this link:

  FAQ: Why no audio or video will not at the track where I let down?

  Thank you

  Ilyes Singh

• How to slow down the sound from a video clip to the exact time (keyframes) and values?

  How to slow down the sound from a video clip to the exact time (keyframes) and values?

  I used the timewarp, but the sound is not affected.

  It is to be expected. Only the native time remapping affects sound, but given that EI is not an audio processing application, the quality is terrible. You must use the hearing or a similar program.

  Mylenium

• limit for video clips following the mouse

  Here's my ACE...
  
  myInterval = setInterval(KBMOglobal,15);
  
  function KBMOglobal () {}
  KBMOglobal1._x = (KBMOglobal1._x - _xmouse) / 10;
  KBMOglobal1._y = (KBMOglobal1._y - _ymouse) / 10-2;
  }
  
  OK, so my video clip follows the mouse around, with a slight delay and the y axis is slightly lowered. the scene of my film is 380 x 640. someone has suggestions on how to create a border, equal to the size of my stage, which leaves no film clips that follow the mouse to extend to the beyond? Does still make sense? Basically, I'd like to as video clips to follow the mouse, the stay of entire film visible on the scene clip. due to the positioning of elements on the stage which initiates this function, I must only consider the width of each clip, which fortunately is a constant = 200. Does this make any sense? Let me try this one more time...
  
  How to set the above function for the clip, KBMOglobal1 (which has a width of 200) remain in the horizontal limits of the scene (which is 380)?
  
  Thank you for your time and all members of this forum who was very helpful with all my questions in this project so far, yall rock!
  

  Quote:
  Posted by: NickTheNameless
  It's almost works perfectly, however I need to adjust the limit of axis x. for some reason, the video stops after the mouse when it comes to halfway on scene, horizontally.

  could you please be so kind as to explain what your script is doing? because I'm not a fool, I realize that I could probably replace 380 to 760 (double the width of the scene) and it works as expected. However, if you could spare the time to explain what the following two lines do, step by step... I'll give you my first born...

  KBMOglobalGeneralCancelDispatch._x<0?KBMOglobalGeneralCancelDispatch._x=0:KBMOglobalGenera>
  KBMOglobalGeneralCancelDispatch._x > 380 - KBMOglobalGeneralCancelDispatch._width? KBMOglobalG eneralCancelDispatch._x = 380 - KBMOglobalGeneralCancelDispatch._width:KBMOglobalGeneralCancel Dispatch._x;

  Thanks again for your time!

  do you know? : operator? It's as if... else... statements,

  When we say:

  somethingIsTrue? do1(): do2();

  This is exactly the same direction as:

  If {(somethingIsTrue)
  do1();
  } else {}
  DO2();
  }

  Now, we look at this line:

  KBMOglobalGeneralCancelDispatch._x<0? kbmoglobalgeneralcanceldispatch._x="0:">

  It is same as

  If (KBMOglobalGeneralCancelDispatch._x<0)>
  KBMOglobalGeneralCancelDispatch._x = 0
  } else {}
  KBMOglobalGeneralCancelDispatch._x
  }

• Panasonic NV-DS65A cassette MiniDV camcorder - can I get my personal video clips from my camcorder directly to my computer?

  I was wondering if I can't save my personal video clips from my camcorder right on my computer.  If so, how this is possible.  I checked the manual for my camcorder and it does still photos but I need to save the tape of the camcorder to my computer.

  Hello

  · What is the operating system installed on the computer?

  If the camcorder does not support video recording directly to the computer, then you can use Windows Movie Maker.

  See the link below and check if it helps: importing video from a DV live camera: http://windows.microsoft.com/en-US/windows-vista/Import-live-video-from-a-DV-camera

• How can I transfer a video clip from youtube to Windows Media Player?

  Original title: transfers.

  How can I transfer a video clip from youtube to windows media player

  Hi john331,

  1. what version of Windows Media Player are you using?

  2. What is the format of the video file?

  (a) you can use a third party downloader to download the video file on your computer.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  (b) thereafter, try to play the video in Windows Media Player.

  Hope the helps of information.
  Please post back and we do know.

• How can I list the instances of video clips if the clip that I am referencing is nested?

  Hello world

  It's me again and I am running into a problem. So I have this clip which is nested in several video clips. I mean Flash to perform an action when this clip from movie hits another video clip in the main timeline. It's just a collision for a game detection using the hitTestObject code. I was thinking of using MovieClip (root), but that won't work because it is so nested. Can someone help me? I would like to know if I need to explain more. Thank you!

  -DJ

  I didn't ' think I can help you without having to upload your file to see what you're doing and I don't download and fix the files unless I'm hired.

  Maybe someone else you download your fla and you help.

• Clicking on a video clip selects the entire clip, rather than the range.  I did the update and it still happens.  Help!

  Problem * by clicking on a video clip selects the entire clip, instead of cuisiniere.* *.

  I restarted my computer like new.  Lost the iMovie app.  Re downloaded in the App Store.  Now I have a crappy iMovie on the App Store application.  Then I made, I got the updated version and I did.  Always update does not resolve the problem.  I'm sucking in a hole because I need to make new videos for work and I can't.  In addition, I'm too broke to buy Final Cut.  In addition, all apple stores have a waiting list of 5 days before they see you!  Thank you Apple with a 6 bites taken out of it!

  I had a similar problem and it was driving me crazy. I think you press and hold the 'R' key now to select a range, otherwise, it will select the whole clip. I think it's a goal a feature and not a bug? Hope that helps!

• videos downloaded from the iphone upside down... help!

  videos uploaded from iphone are backwards.   How to rotate a video in media player?

  Hello

  What operating system is installed on your computer?

  You won't be able to shoot a video with Media Player. However, you have the option to rotate a video in Windows Live Movie Maker. If you have not installed Windows Live Movie Maker, you can follow the link below and install Movie Maker:

  http://windowslive.com/desktop/MovieMaker

  Once you download and install Windows Live Movie Maker, you can follow the steps below to rotate and save the video:

  a. you can turn video clips in Windows Movie Maker by following these steps:

  b. import the video clip in Windows Movie Maker.

  c. drag any video clip and drop it on the timeline.

  d. on the Tools menu, click Video Effects.

  e. to rotate the clip to the right, drag the effect video rotation 90 and drop it on the movie in the timeline.

  -or-

  To rotate the video clip on the left, drag the video effect rotate 270 and drop it on the movie in the timeline.

  On the file menu, click on the video file and follow the instructions of the wizard movie recording.

• I can import and edit video clips from Sony in Movie Maker 5 on PC but not in moviemaker 6 on my laptop?

  I can import and edit video clips from Sony in Movie Maker 5 on PC but not in moviemaker 6 on my laptop?

  in moviemaker 6 it appears as a line across the screen, the sound is ok but the canoe edit because I do not see?

  can you help me?

  Hello

  Check with the Sony Support, their documentation online, and their forums as this is probably a known issue.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  ==========

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - check the sounds of the addition in the left menu and others on the
  main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my pc crashed... then repaired... now I can't read my video clips from my camcorder from Toshiba?

  my pc crashed... then repaired... now I can't read my video clips from my camcorder from Toshiba?

  It would be useful to know what camcorder from toshiba.
  Memory, are all quite small pocket, recording cameras a card and HD, probably using mpeg4.
  Your cam will have come with a cd with the right codec on it to allow you to play your files on the pc, you will need to reinstall this software.

• How to export a short video clip to the timeline of EP 13 on my HDD to be used elsewhere?

  I would like to copy and export a short video clip from a video on the timeline of the elements first 13 full length so that I can use it in a different video. Any advice would be appreciated.

  Brian Sweeney

  "Work area bars" are circled.  Him are normally stationed at the beginning and at the end of the timeline.  Drag them there where you want, and then check out.

  Largarath codec is not included in the pre, it is heavy, and you have to install it yourself.  Treatment of H.264 is usually more than "good enough" unless you have pictures very critical.

  

• bringing a video clip at the top of the order of the layers on mouse.

  I have 3 video clips on the stage in separate keyframes: mag1, mag2 & mag3

  trying to bring each mc on mouse up.

  mag1.addEventListener (MouseEvent.MOUSE_OVER, up, false, 0, true);

  function up(evt:MouseEvent):void
  {
  setChildIndex (MovieClip (evt.target), numChildren-1)
  }

  GETTING THIS ERROR.

  ArgumentError: Error #2025: the supplied DisplayObject must be a child of the caller.
  at flash.display::DisplayObjectContainer/setChildIndex()
  at skate_fla::MainTimeline/up()

  Thanks in advance for the help!

  It is possible, you should use "evt.currentTarget' instead of"evt.target"I think that if you use instead of MOUSE_OVER ROLL_OVER it wouldn't matter that you used.

  In addition, you can simply use addChild() to bring an object to the top...

  function up(evt:MouseEvent):void
  {
  addChild (MovieClip (evt.currentTarget));
  }