Format my laptop without installation disc, the system repair disc or the system image.

Similar Questions

• How can I reinstall vista on my laptop without a disc.

  How can I reinstall vista on my laptop without a disc. I have an acer aspire 4520 and INF files are missing, umbrella I don't have a disk to reinstall. without these files, I can't update any driver...

  Hello

  You can reinstall vista without a drive on an Acer if you never received a disc when you bought

  try to press Alt + F10 at the Acer splash screen after power on to start the relocation process

  Here are the different ways to reinstall vista;

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I install Photoshop Elements 9 on a laptop without CD disc?

  I bought Photoshop Elements 9 a few years ago and it is very good, I now have a new, smaller laptop without CD disc and I have no idea how install the CD of Photoshop I own already, any suggestions?

  Download the software here and activate it with your serial number:

  Direct download links for Adobe software

  Mylenium

• can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
  Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• The clean install of Windows 7 Home Premium x 64 without installation disc.

  Hello

  I recently bought a Toshiba laptop with a Home Premium Windows 7 x 64 preload version.  It has not come with a Windows installation disc.  I want to reformat the hard drive and put on a clean version of the same operating system.   Right now my only solution is to find someone with a disk or an iso.  Which turns out to be harder than I thought.   Is it possible to make an image of Win 7 Win 7 without having to make a picture?

  I also own a copy of Windows 7 pro x 64.  Can I use this disc to install, with the key of Win 7 Home Premium?

  Thank you

  FatherFinch

  If you perform a "clean" of Windows 7 Home Premium installation, you will need to buy Microsoft Windows 7 Home Premium 64-bit.  Someone else using Windows 7 disk is not allowed under the terms of the license Microsoft Softrware.

  Q: I also have a copy of Windows 7 pro x 64. Can I use this disc to install with Win 7 Home Premium key? 

  A.   No

  Carey Frisch

• No disk Vista installation - bad/missing file on reboot prevents the go mode without installation disc required

  Is it possible to get an installation disk of Vista download image/content.  I have a valid code of MS for Vista, but there was no installation disc provided with the computer at the time of purchase (without recovery disc either).  An installation disc is required to restart the computer to restore startup files that have been corrupted or damaged in case of overheating of the CPU.

  If Windows Vista was preinstalled on your computer, contact your computer manufacturer and ask a Setup for your model disk. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows Vista reinstall without installation disc (Acer Aspire 6920 G)

  Hello

  I would like to ask for help. About a year ago I bought this laptop with the original Windows Vista validation but key without a Windows Vista installation disc. Now, I would like to reinstall my system.

  I downloaded the file .iso Windows Recovery (of size 120 MB), it burned down and tried to reinstall Windows. I got to the stage where I type the validation key, but always when I typed that key, it appeared that the key is invalid (I checked this certificate stuck on the laptop and it seems to be original).

  Thanks in advance

  This is NOT a Vista reinstall the drive, it's a record of STARTUP repair!

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition t put it back to factory settings.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

   

  Normally, they do this for a cost of $ small.
  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11, Acer is normally Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Can I configure wireless mg3122 without installation disc printer?

  I recently moved and have lost the installation disc for my MG3122 printer. Can it be configured without it to use wireless without it or where I can get another copy of the installation disc? Any help would be greatly appreciated. Thank you

  Hi glass9711,

  The printer can be configured wireless using the latest drivers on the Canon USA site.  So we can provide you with instructions to download the drivers for your computer, please answer with this operating system you have (Windows or Mac OS X version).

  We look forward to hear from you!

  If it is a question of time-sensitive, additional support options are available to contact us.

• can I reinstall vista without installation disc

  Ive lost the installation disc toshiba satellite

  Hello

  read the information below

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  also ask them if you also have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Set up printing wireless Photosmart 2575xi without installation disc.

  How to set up printing wireless Photosmart 2575xi without an installation disk? I lost the installation disc. My operating system is Windows XP.

  Never mind on my previous message. After searching for a long time, I found this link: http://support.hp.com/us-en/document/c01708573.

• Reinstall PSE 11 without installation disc.

  Hi, PSE11 is not working on my desk and I lost my installation disc. The product was purchased in a store, do not download on ADOBE.com. I have the serial number, but how do I download PSE11 to reinstall.

  All thoughts

  Hi marshallp777,

  Please find the direct downloads for 11 elements: l http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm .

  Please follow the very important instructions before downloading.

  Kind regards

  Romit Sinha

• Using my laptop without connection to the internet.

  I tried to get on my computer to work on a document. There is no Wi - Fi, hotspots or land lines around so I can get on my PC. What can I do to get to my documents without connecting to the internet to open up my PC?

  Oops... Problem solved. I turned off airplane Mode.

• How to format individual images in Dreamweaver CC without affecting all the other images used?

  Whenever I have format a picture, the change affects all the other images on the site. Is there a way to format a single image?

  Give it a unique ID (1 x per page) or the name of the reusable class in your CSS.  XXX corresponds to the value in pixels.

  CSS:

  ID

  IMG #ID {width: xxxpx}

  name of the reusable class

  IMG. className {width: xxxpx}

  HTML:

  

  or

  

  Nancy O.

• VIDEO WITHOUT STOPPING ON THE LAST IMAGE

  Help!  I ticked the box in Folio Builder v26 - "stop on the last image" - but when I saw in Adobe Content Viewer, after playing the video, it is up to the poster frame - which is the first image of my video.  This won't work for what I'm doing at all.

  Can anyone help?

  Thank you!

  Kathie

  When you are previewing are previewing on your desktop or on an iPad?  Stop at the last frame is available through iOS so it does not work on your desk.  But if you have your iPad plugged in to your computer and open it from the ACV on your iPad then you should be able to preview on the device and it should work.  But as I said, this will work only on iOS.

• Videos without stopping on the last image

  I created a folio containing a video. This video needs to stop on the last image, while it is not reset iteself. in the control panel overlays folio I selected the stop"button on the last image. But previews and when the folio is updated, video seems to ignore that and play through and restores at the beginning. Please help, I absolutely need to have the judgment of the video on the last image.

  You have probably created a folio v20. Stop at the last frame was introduced in v22 or v23. Folio properties allows you to update your version of the Viewer, and then try again. (Of course, if you have an older application on the App Store, you'll want to consider.)