format of path MAXL Linux as operating system

Similar Questions

• How to format my hard drive as my operating system running IM?

  How to format my hard drive as my operating system running IM? I tried many ways must my computer tells me I have to stop all programs that I have running. play help as soon as possible!

  Some PC contains a hidden hard disk restore partition. If yours is one of them, this is how you return your PC to its original state.

  What is the brand and model of your PC?

  Yet, this is a pretty drastic step. There is more easy and faster to improve performance. If you do not want to give it a shot, let us know. And also tell us the specifications of your PC, type of XP, SP, etc.

  Also, you might find follows her beneficial:

  Here are the usual causes of slow:

  1. malware (malware). You need to rule out first! This page has excellent information:

  http://Web.archive.org/Web/20080610163247/http :// www.elephantboycomputers.com/page2.html#Removing_Malware

  2. some programs aimed at combating malware (for example, Norton and McAfee). Ironically, they can slow things down because they use simply much too many resources. Sometimes they cause conflicts with other programs. And their default mode is to scan your entire hard drive whenever you start. Fortunately, there are other programs of anti-malware software available that use much less resources (p. ex., NOD32, Avast and Avira).

  3. too much of certain types of programs still running in background - with or without your consent. (Then again, a lot of programs running in the background of the consequences trivial.)

  To determine each program and process, you are running, use the task (Ctrl + Alt + Delete) Manager and click the processes tab. You should be able to sort by CPU usage or memory usage for a good ideas that are resource/memory hogs. You must write the names of all the processes for future detective work (or take a snapshot and print it).

  Use these sites to determine what these programs are, and learn how configure them to not always run when starting:

  http://www.PACS-portal.co.UK/startup_content.php#THE_PROGRAMS
  http://www.bleepingcomputer.com/startups/
  http://www.AnswersThatWork.com/Tasklist_pages/Tasklist.htm

  Sometimes, it is recommended to use msconfig to configure programs to run at startup. A better, more thorough program is Autoruns:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  But before that, you must use the settings preference of the program in question. Otherwise, for some programs, they will return to the list of startup anyway!

  If you do not want to use msconfig, it can be accessed in this way:

  Start | Run | Type "msconfig" (without the quotes). Enter (or OK)

  4. not enough RAM, causing the PC too rely on the pagefile. A quick way to determine if what is happening is to open (Ctrl + Alt + Delete) Task Manager, and then click the performance tab. Then the three values under Commit Charge (k) Note: in the lower left corner: Total, limit and peak.

  The Total number represents the amount of memory you are using right now. The vertex figure represents the maximum amount of memory you made since the last boot. If these figures are lower than the value of the amount of physical memory (K), then you probably have lots of RAM. In case you want to study it more, you can run the Page queue Monitor for Windows XP:

  http://www.dougknox.com/XP/utils/xp_pagefilemon.htm

  5. you can also verify that the access mode of your hard drive has not changed from DMA to PIO:

  http://www.technize.com/2007/08/02/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/

  and

  http://winhlp.com/node/10

• 122tu 15 - ac: what Linux/window operating system fully support my computer hp laptop 15 - ac 122tu

  Hello

  I have buy new hp laptop 15-ac 122tu product: N8M18P #ACJ. I got the install window 7 32 bit but faces many problems of pilot. Now, I want to know what linux or other OS is compaitable with this modal which contains all the drivers and software required. Please tell me OS version also directives about the facility.

  Thank you

  It came with FreeDOS, obviously. 32-bit Windows was not a good choice because of the unavailability of the driver and you have equipment that needs to run a 64 bit OS. There is no operating system that will "just work" without any configuration and drivers required. Windows 7 64 bit and more can be implemented with this site downloads and there are so many Linux distributions, it is impossible to discuss together and how to install them. Personally, I use Kubuntu and they just introduced 16.04 (Xenial) Long Term Support which would probably fit with very little after installation system requirements:

  http://cdimage.Ubuntu.com/Kubuntu/releases/16.04/Release/Kubuntu-16.04-Desktop-AMD64.ISO

  This says AMD64, but is also for Intel 64 bit compatible processors which is yours. Download and use a burning program to create the file .iso image on a DVD-ROM finished installation disc and boot from it. Follow the prompts on the screen. If you install Kubuntu only default options works perfectly.

  Let us know if you need more information. Your question calls for a test answer the length of a novel but we'll take it at the same time.

• I want to save the files in tif format in windows 7, 64-bit operating system and Office 2010.

  Hi team, support

  I'm using windows 7, 64-bit and Office 2010 operating system. I want to save web files(e-invoices) in .tif format.

  Because the tif format is only way to download web files(e-invoices) in the download system.

  Please tell us how can I save the files directly in tif like Window XP format.

  He had no problem when I used Windows XP. I could save the files in tif through Microsoft Office Image Writer as a default format.

  A tif file is simply an image

  Office 2010 does not include Microsoft Office Image Writer, he made the MS featured xps document writer and send to OneNote (according to the version of office)

  http://Office.Microsoft.com/en-us/Word-help/save-as-XPS-HA102351576.aspx

  http://www.Microsoft.com/en-GB/download/details.aspx?ID=20261#system-requirements

  You can also think about saving to PDF

  Nothing else; Re-post for groups of office, not this group of generic programs because it has nothing to do with the victory

• Have not been able to get flash since the upgrade to 7.0.1 using the Linux Debian operating system.

  I was not able to get the flash player since the upgrade to FF 7.0.1 on Debian Linux. I followed the instructions in "How do you install the Flash plugin? (https://support.mozilla.com/en-US/kb/installing-flash) several times.

  As I said this is a problem since the last update. I was able to get flash working in earlier versions. Flash works in the Debian version of FF "Iceweasel".

  You are running a version of Firefox 32 bit or a version of Firefox 64 bit-to-bit?

  You must use the same Flash plug-in to make it work (32 bit Flash with 32-bit Firefox).

• format drive then download the new operating system

  I have a late 2012 mini mac osx Mavericks 10.9.5 I want to format the drive, then download el captian I will backup everything before you do running.

  -Download the installer for OSX El Capitan from the Mac App store.

  -Make a USB bootable media using the following:

  DiskMaker X

  -Start since the media

  -Format the boot disk and install OSX from bootable media

  -Restore your data

• How do you format a hard drive with an operating system on it?

  This is actual a fairly simple question, I think compared to what should probably be asking. But on the idea of the recovery discs, I think it's what I excatly. If anything on the idea of format and replaced by reformat. The computer didn't come with any disks or news or have any information. But all CD/DVD discs recovery.

  In addition, when upgrading to this day, is losing usage characteristics. Options to other programs are losing as well. Or more hidden away from the use of the actual program.

  Trying to find info to format the hard drive is not very accurate. Contact support is usually meet with updates.

  Give something to work in the ideas of features/options elsewhere and others, disable or activate is just as accurate as to what it is with or against the options and features.

  Try to work with those who don't, with or without update seems to be best with reformatting later, with a format that is better placed within the use and what features work as installed.

  Help and Support is also in the lack of many topics and listed from the first installation. Online is the only other source of info otherwise. Updated information is the lack of fitness.

  Thus, on the idea of having to reformat, I would rather just format the drive.

  You can see http://michaelstevenstech.com/cleanxpinstall.html#steps and/or method 1 in http://support.microsoft.com/kb/978307.

• Linux VM operating system. Failed to start

  Hello

  I am facing problem when starting Linux OS Virtual Machine. Please see attached

  After sending the command CTRL-ALT-DEL, his work.

• End end NIC Teaming on ESXi with redhat linux guest operating system

  I'm running into a situation of lack of bandwidth for my backup server running inside the virtual machine environment. To increase bandwidth coming from a number of backup clients on my backup inside ESXi 5 server. I would like to collage x NIC 2 inside my redhat Server installation and train the grouping of NETWORK cards using Hash my ESXi host IP.

  What is the feasible way to provide a 2G from end to end connection to the outside world for my redhat backup media server? or there is an inverse?

  I don't think you need to add a second NETWORK card to the Redhat VM, which acts as a backup server as a single for the virtual computer NETWORK adapter can accommodate more load than 1 G.

  I have a couple of Redhat with a single NIC servers. VMXNET the following example shows this ethtool sees for the NETWORK adapter on one of these Redhat servers.

  [sfuller@rhel7 ~] $ sudo ethtool eth0
  Settings for eth0:
  Supported ports: [TP]
  Supported link modes: 1000baseT/Full
  Supports auto-negotiation: no
  Advertised link modes: unreleased
  Announced the autonegotiation: No.
  Speed: 1000 Mb/s
  Duplex: full
  Port: Twisted pair
  PHYAD: 0
  Transceiver: internal
  Auto-negotiation: off
  Link detected: Yes

  When I run a transfer TCP (using thrulay) from one server to another, you can see that it is 2.6Gbps average on the transfer of 10 seconds.

  [sfuller@rhel7 ~] $ thrulay-t10 rhel6
  the local window # = 219136B; distance window = 219136B
  block size # = 8192B
  # Path MTU = 1500 b, MSS = 1448B
  duration of test # = 10 s; statement interval = 1 s
  SID, start end s, s Mbps RTT, ms: min max avg
  0.000 (0) 1,000 2550,656 0,286 7.141 0,540
  (0) 1,000-2,000 2421,206 0,290 20.833 0,656
  (0) 2,000 3,000 2828,721 0.300 8.399 0,542
  (0) 3,000 4,000 2844,359 0.298 0,541 8.061
  (0) 4,000 5,000 2727,592 0,280 0,567 14.584
  (0) 5,000 6,000 2072,464 0.303 0,734 202.781
  6.000 (0) 7,000 2872.825 0.529 0,283 1,413
  (0) 7,000-8,000 2846,425 0,287 5.918 0.535
  8,000 (0) 9,000 2869.543 0,536 0,299 1,436
  (0) 9,000-10,000 2841,009 0,294 0,532 12.221
  (0) # 10,000 0.000 2687,479 0,280 0,566 202.781

  So this shows that we can get more than the throughput of 1 Gbps on a single "GE NIC" on a Redhat VM.

  You will need to do is, as you mentioned, change load balancing on the host than the Redhat VM ESX runs using the road based on the hash of the IP. This will allow the Redhat VM to use more than a single teddy bear on the ESX host. You also need to several customers, including LSB of their XOR IP addresses differently, but you said you have several clients and so unless you're really unlucky with the IP addresses to clients have you should be good there.

  I hope this helps and good luck.

• Cannot transfer or write emails. Using the linux operating system

  I can't write an email or send an e-mail sent. I use linux for operating system.

  Solved the problem. It was the program of Ghostery.
  Thank you for your help.

• Computer laptop dv6 Pavilian: I need the original operating system for a Pavilian model dv6 dv6 1355dx

  I have upgraded to windows 10 and did not like it and tp attempt to restore the computer and accidentally erased my original windows 7. I then bought and installed windows 7 64 bit and the computer does not work properly; I need now the drive of 32-bit windows 7 original.

  Gurk

  Hello;
  
  Let me welcome you on the HP forums!
  
  I wish I had some good news for you, but I did not...

  Ordinarily, I advise to use HP recovery media to restore your PC to its original state. That would erase the entire disk, format the drive and install the operating system, drivers and utilities HP.
  
  Unfortunately, there is no support of HP recovery related to HP for your PC Product Page. This means that the stock HP is no longer the recovery media for your PC. They store any long recovery media for older PCs.
  
  Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• How to replace HP Mini 311 operating systems

  (HP Mini 311 model 1000NR)  Windows XP is so messed up, need to format HARD drive and install the operating system that you are clean. Computer says it cannot find any HARD disk after loading new Windows XP.

  Paul, after working with this situation and still unable to get the computer and runing again; I am pretty sure that there is a problem with the USB connections. Thanks fo your information, it was very useful, but in vain.

  Btk (billy the kid)

• Patch management of operating system with Update Manager

  We are looking for a solution to automate patching of virtual computers running all versions of Windows and Linux and updating of the models used to create them.

  I had a few questions about the use of Update Manager for managing operating system patches:

  1. What are the versions of Windows on this work?

  2. the installation of patches of OS automatized so that virtual machines that are turned off can receive OS patches the next time they run?

  3. as the Update Manager works only with ESX hosts and VMs Windows (as far as I know) - is there a comparable solution for maintaining patches operating system of Linux virtual machines through the virtual environment?

  This may not answer your question, but maybe help you plan for the future:

  of http://www.vmware.com/support/vsphere4/doc/vsp_esx41_vc41_rel_notes.html

  VMware vCenter Update Manager features. vCenter Update Manager 4.1 and its updates update releases are the latest editions to support digitization and the rehabilitation of the patches for Windows and Linux guest operating systems and applications that run inside a virtual machine. The ability to perform operations of the virtual machine upgrade of hardware tools VMware and virtual machine will continue to be supported and strengthened.

  André

• Adding a hard drive to a guest operating system

  Delema:

  I need to add a hard drive that is big enough in our machine esx which is formatted to NTFS and the accessible car from a guest operating system to Server 2 k 3. (working on a budget here) its 1.5 to and is full of about 80%.

  Basically, I need to know whether or not its possible to add this drive without formatting and accessible by the guest operating system

  I understand now - you will not be able to take out the drive and add it to your ESX Server and be able to access the store data NTFS and Yes using Converter requires a data store with the 1.5 TB or necessary for the new drive - virtual

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true?

  I have a linux operating system and I would like to remove it and install windows xp. I'm afraid that if I wipe the drive, I'll be unable to boot the windows xp disc. Is this true? What is the best way to remove the linux operating system and install windows xp?

  original title: HOW I CAN UNINSTALL LINUX OPERATING SYSTEM

  If there is absolutely nothing on the disk you want, just format the drive and install Windows XP:

  1. start from the CD. You may need to change the first boot to a CD device in the BIOS. To do this, when you switch on the look for a configuration message indicating what key to start typing, F2 and del are commonly used. The message appears for very long and it you miss, you have to restart the computer. In the BIOS, look for a section that contains the boot sequence, change it to CD, save it and let the computer to restart.

  2. the installation sequence is answering the message press any key to boot from the CD, and then press ENTER to set up Windows, press F8 to accept the EULA, delete the partition, press ENTER, type L to confirm delete, type C to create a partition, choose (Quick) format. Then begins the installation and restart will therefore ignore the subsequent message to press any key to boot from the CD-ROM.

  3. actual installation will begin and takes about 30 minutes. Finally, download all the missing Windows service packs and other updates.