Format "uncompressed" IMAQ AVI2 create?

Similar Questions

• IMAQ AVI2 write leak memory frame

  There is a bug report.  Writing great images 2160 x 1080 AVI file without compression CODECs causes the memory usage go back upwards, until LabVIEW fundamentally exceeds the limit of 8 GB memory and stops processing the images.

  Hi John,.

  I reproduced it and classified CAR 428325 for her. At first glance it seems to be only a problem when the color of the AVI format does not match the format of the input images you write. In your case you pass U8 images in but the written video AVI, YUV (color) images. If you pass the VI to create IMAQ to create images of RGB32 instead, the leak disappears. Switching to Y800 AVI format (uncompressed monochrome) instead of changing the side of the entrance shows no leaks either.

  If you do not actually want the disparity of monochrome image processing and color AVI format, you can work around this problem by putting a VI Cast into your code to convert the U8 RGB32 image before writing in the AVI file.

  Eric

• IMAQ AVI2 sampling error read

  Hello

  I get the following error when I try to extract all the frames of an avi file. Error 1074396010 has occurred to IMAQ AVI2 read image

  I've had a while loop to perform read and write images and save them as .jpegs.

  No idea or help is appreciated.

  Thank you

  solved myself. Thank you

• What format are the files created by the scanner deskjet 4625?

  I want to buy the Deskjet 4625 CZ284C. but I'm not in the specification of what is the format of the files created by the scanner.

  I need the files in. JPG format and the option so that it takes. PDF format...

  need a quick answer, thanks, Zvika

  Hello

  You can scan to PDF and text can be added to documents, JPG and TIF for images/photos. Please see the following book:

  http://h10032.www1.HP.com/CTG/manual/c03345663.PDF

  Kind regards.

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• IMAQ AVI2 writing Frame question

  I am using the AVI2 IMAQ write vi framework to create an AVI file from images generated by a PCIe-1433 and a series camera Basler Ace.

  Whenever I try to use the AVI2 IMAQ write framework vi he missed my applicaton. The result is that loose I frames and my program becomes unrespsonsive. I tried to put the AVI2 IMAQ write setting in a loop from consumers hoping that if I feed it to my things in the main loop will speed up, but it still bogs down my program.

  If I take 10 seconds or more data and stop the program, and then it takes about half an hour to clear the queue and write all these images on the disk. It is simply unacceptable. How to speed up the generation of the AVI file of the frameworks I caught?

  My current settings on the save the AVI file are a rate of 30 frames per second, 250 quality and using the Cinepak Codec of Radius for encoding. The camera has the two camera cables installed, so I think I'm running the camera in complete configuration mode (not basic, but I'm not sure). I was 100 fps earlier and caused substantial problems, so I slow fps. Ideally, I would like to be able to turn this to the faster frame rate.

  I intend to try experimenting the value of fps and the Codec to see if I can improve performance, but no entry or help would be greatly appreciated.

  Motion JPEG is MJPEG.

  You can also use any third-party codec that can be installed and used by the functions the AVI (Windows). There are some commercial existing ones and who can use the hardware acceleration features more and new compression (such as H.264) codecs, but the MJPEG one included with NI Vision is very good.

• Format and Preset to create a DVD

  I used the DVD MPEG2 format and the broad progressive NTSC DV as the preset but still gave me a message.  I was told that I need to use H.264.  Is that correct and if so, should I use NTSC DV wide Progressive as the screening?

  What you are endearing, a jpeg file? Do not see anything

  Maybe you can only convert a .pdf file?

  The f

• myRIO video recording Question

  Howdy all!

  I am currently using a camera to create a video on a flash drive. The camera and USB are connected to a myRIO, so both work with the myRIO. I have to the were completely failed in creating anything again.

  I created my VI using the example of capture and record to AVI and only changed the save location. Whenever I run the code, an error occurs after the IMAQ AVI2 Create function: error-1074396070. It simply indicates that "IMAQ Vision: unsupported function.»

  My suspicion is that the myRIO does not support functions for video creation, because the program works fine on my laptop when I run without the myRIO. I've updated the drivers on the myRIO, but the problem persists.

  If myRIO does not support the Vision, is there another way I can save video using the myRIO?

  Any help would be greatly appreciated!

  Thank you!

  -Aggieimperator

  Well, I checked on a 1900 and I could not also get AVI functions to work. I suspect that they are not supported by the myRIO. Would you rather save the pictures on the flash drive and then convert them to an AVI file?

  -Tanner

• error-1074396070

  Howdy all!

  I am currently using a camera to create a video on a flash drive. The camera and USB are connected to a myRIO, so both work with the myRIO. I have to the were completely failed in creating anything again.

  I created my VI using the example of capture and record to AVI with my own alteration. To the best of my knowledge, I think that my code works, but I don't see what could be the problem. After a while, I ran the program to highlight the active execution and realized an error occurs after the IMAQ AVI2 Create function: error-1074396070. It simply indicates that "IMAQ Vision: unsupported function.»

  Any help would be greatly appreciated!

  Thank you!

  -Aggieimperator

  I don't know exactly, can you try to save the file on your local drive instead of flash and try it?
  -Check the codec that you try to give.

• How to create a new directory that works in exe format?

  Hi friends.

  I wanted to design a program that stores data and I want to keep this data in a directory next to my program. In the format of vi, all is well (I have attached an example of what I've done). But when I change my program in exe format it does not create the directory? I think it's because of the path of the vi! But how can I implement this design? Please help me.

  Kind regards

  Masoud

  Read:

  Why my executable does not work when you use the constant path of the current VI?

• Why some AVI format doesn't work properly with IMAQ?

  I tried to do a job with handling the AVI files in labeled, but it seems that mine will not work. Whenever I try to load, I get the error:

  Error 1074396005 has occurred to IMAQ AVI2 close

  Possible reasons:

  IMAQ Vision: Session invalid AVI.

  What is strange, is that some AVI files will be read fine. If someone could explain why I see this error or how to convert my AVI files to the correct version, I would be happy. I have attached two files. The touchdown, one will not work. The ball marked a will.

  
  

• .gifv or .mp4 format create gallery in Muse?

  Hi all

  
  

  I'm sure that most of you is aware that .gif animations are starting to be replaced with video .mp4 or even formats of .gifv to create "cinmeagraphs", short of high-quality looping of the animation from movie files that play without needing a video user interface and without causing a huge file to be downloaded on the page.

  However, the majority of sites these videos or "Gallery" is usually encrusted with code on a server somewhere (which saves a big file to download on the page).

  
  

  Issue.

  Adobe Muse supports the formats of file .gifv?
  

  Someone was lucky creation and use of these types of on-site Muse image formats?

  And if so, you include this HTML code? Or loading them directly on the page?

  Appreciate any answers or ideas in this regard.

  
  

  See you soon,.

  Robbie.
  

  You can create any form of pixel-based or video animation in Muse, so I don't know yet where this issue. GIFv is not yet what it is standardized and just a hack, so it is not guaranteed to work. Everything can be done with normal widgets and the known code snippets. technically there is no difference between a MP4 file streaming or load gradually one to the extent where the HTML is concerned. The rest is up to the player routines.

  Mylenium

• Create your first website - part 3: adding content to pages - inserting/formatting...

  text split view and if you type in a statement by the head of Mac OS x after the end of the text you want to make a header to not create one end of paragraph in the code view for me. It creates a CR LF in the code view, but not a paragraph end tag (< /p >).

  I had to go into the design of the text to create an endpoint in code view.

  Placing the cursor on the position "inside Tesla Motors" and clicking on heading 2 in the list format of properties also create a < h2 > < / h2 > line just below the text in Design view, there are at least two additional lines created. None of this happens as your tutorial said.

  
  

  Any ideas?

  
  

  Dave C.

  Looks like you do this in Code view. You must be in design mode (or the right side of the mode split).

  None of this happens as your tutorial said.

  You realize that you are this announcement to an end-user forum Adobe? We are all Adobe customers like you.

  David Powers has written the tutorial. It stops here, here and here but no guarantee on the time.

• Wrong format

  You use BOOTCAMP to install Windows to dual boot, the program ran OK i, e, it partioned the HD in my Imac and formatted according to the needs. However when it came time to install Windows on the newly formatted partition, BOOTCAMP has created the program said that it couldn't find the score he had created, but that in all cases it not was not formatted correctly. ..... What is going on?

  Reference - https://help.apple.com/bootcamp/assistant/6.0/ and https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2

  For here in 2015 and later models...

  

  

  For models who take Recovery HD, there are similar screens. Snow Leopard or earlier versions of OS X, Recovery HD does not exist.

  

  

  For example, without a HD recovery...

  

  

• Output of the image after the creation of DVD - letterbox format

  I have intervideo dvd Creator 2 installed on my equium L20. When you save a movie on DVD, it creates the very narrow exit in a letterbox format.
  How to create an image full screen?

  Hello
  What DVD player that you use to watch this DVD?