Formatted my computer like my rear windows

Similar Questions

• I just formatted my computer from ubuntu and installed Windows xp. And now I have no sound. It says "No. Audio Device.

  Original title: No Audio device

  So I just formatted my computer from ubuntu and Windows xp installed. And now I have no sound. It says "No. Audio Device. My integrated sound card is broken and so I 'card his Creative Labs SB0220.  I search for hours but couln can't find any solution.

  Hi Sannukas0016,

  Follow the suggestions below for a possible solution:

  Method 1: Run the fix it from the link below and check if this can help:

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/NO_SOUND/en-us

  Method 2: You can also try the steps from the link below:

  There is no Audio playback after you install the Sound Blaster Live! Sound card

  http://support.Microsoft.com/kb/313022

  Hope this information helps.

• HOW TO FORMAT MY COMPUTER WITH PREINSTALLED VISTA

  I WANT TO INSTALL WINDOWS7. IF I WANT TO FORMAT MY COMPUTER WHICH IS PRELOADED WINDOWS VISTA HOMEBASIC SP2. PLEASE GUIDE ME. URGENT

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  How to do a clean install with Windows 7

  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  Also read the above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• format netbook computer

  I had problems with my computer speed and programs. I saved all my stuff to a flash drive and I want to format my computer any

  If Windows 7 is pre-installed:

  Computer OEM manufacturers are required to provide at least a way for you to reinstall Windows, if you buy a computer with preinstalled Windows - your netbook computer should have included a partition of your hard disk-based restore, check your manual for instructions on how to use it to reinstall Windows 7.

  Or try the following:

  Windows 7 is slow

  (1) unplug all devices such as printers, external hard drives, microphone, webcams etc.

  (2) make sure that your BIOS and drivers are up to date. Update of the BIOS can be risky, don't do that if nothing else works.

  (3) free Up space disc hard - the following procedure cleans them files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  A. click the Start button, in the start search box, type disk cleanup, and then click Disk Cleanup.
  B. in the drives list, click the drive you want to clean, and then click OK.
  C. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  D. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  (4) defragment your Windows 7 computer:
  http://Windows.about.com/od/maintainandfix/SS/SBSdefragWin7.htm

  (5) reduce the start up programs:
  A. Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  B. on the general tab, click Selective startup.
  C. then change tabs by clicking on the start tab
  D. uncheck the programs that you do not want to start when your computer starts (do not turn off your antivirus).
  E. click OK, and then restart the computer.

  (6) disable some visual effects in Windows 7
  There are many Visual effects that can be disabled safely to speed up windows 7.
  A. to do this right click on "Computer" and select 'Properties' in the right click menu.
  B. click on "Advanced system settings" in the left pane to open the"System Properties".»
  C. Select the "Advanced" tab from him. Then under 'Performance', click on 'settings '.
  D. now uncheck all the options that you do not want to use (some options disables Aero).
  E. restart the computer.

  (7) turn off the smart search feature in Windows 7 (will increase search time)
  A. make a right-click the icon "Computer" in the Start Menu and select 'manage '.
  B. click on "Services and Applications" in the "Computer management" window
  C. click 'Services '.
  D. you can see many services listed there. Search for "Windows Search".
  E. right click on "Windows Search" in the list and choose "Properties".
  F. in the 'window of properties of Windows search', in "Startup Type" and choose "disabled".
  G. click 'Apply' then 'OK' and that's all. The function of indexing search for Windows 7 is now disabled.

  (8) open the resolution of Performance problems
  A. open the Troubleshoot utility of performance by clicking on the button start.
  (B) in the search box, type "convenience store" and then click Troubleshooting.
  C. under system and security, click on search performance issues.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• I would like to remove Windows Search 4.0 from my computer. XP SP3

  I would like to remove Windows Search 4.0. I read the applicable posts but did not see a viable solution. It does NOT appear on the Add/Remove Programs list. My computer is NOT infected with viruses. When I went to review my editing history, he showed that Windows search 4.0 (KB940157) could be removed by Add/Remove Programs Control Panel. Y at - it a good work around?

  Hi Soldieridaho,

  Step 1: Run the fixit in the following article and check.

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on Startand then click run.
  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• I want a NEW computer, but I want Windows XP on it. I don't like about adding new fangled to it. I just want to use my OLD stuff. Is this possible?

  I want a NEW computer, but I want Windows XP on it.  I don't like about adding new fangled to it.  I just want to use my OLD stuff.  Is this possible?

  Hello

  If you are considering buying new PCs, you can go ahead and buy Windows 7 Professional, Ultimate or enterprise. These editions of Windows 7 supports Windows XP Mode, where you can use all programs Windows XP. You can also use the Windows compatibility mode to run Windows XP programs in Windows 7. For more information, see:

  Buy Windows 7: main questions

  http://Windows.Microsoft.com/en-us/Windows/shop/buying-Windows-7-top-questions

• I buy an original windows vista.y after that I have format my computer, I can't activate it? Msg show me the product already use it?

  I buy an original windows vista.y after that I have format my computer, I can't activate it? Msg show me the product already use it?
  my email * address email is removed from the privacy *

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once downloaded, run the tool.
  Click on the button continue, after a short time, continue button will change to a copy button.
  Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.
   
  Have you tried to phone activation?  Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx
  Or click Start and type ' slui.exe 4.  Do not meet the guests until you are asked if you want to speak to an agent.  An agent can tell you the State of the product key.
   
   

• I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

  Windows XP instead of Vista.

  I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

  Hello

  There are a few things that you would have to do to install XP instead of Vista:

  1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

  2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

  3 XP runs with 512 MB of RAM, although a little slow by today's standards.

  4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• My computer is supported by windows, I have viruses and my computer freezing guard I need to format my computer can help you please?

  My computer is supported by windows, I have viruses and my computer freezing guard I need to format my computer can help you please?

  Original title: How can I format!

  Formatting disks and drives: FAQ

  Try 8.1 Windows, Windows 8 or Windows 7 hangs or freezes

• Hi, I format the computer, I would like to know how the applications that I have, if I am already registered and then downloaded again...?

  Hi, I format the computer, I would like to know how the applications that I have, if I am already registered and then downloaded again...? !@

  If you have a cloud account/subscription and then sign up before formatting.  If you have a Creative Suite software license then before you format you must disable all the different suites opening one of the applications and selecting help-> Deactivate

  The actions above will help make it easier for the reactivation of your subscription access/suite when you reinstall after format is done and your system restored.

• I got a message that my Windows 7 is not genuine. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  I took my office for repairs after that my motherboard has given. I did an upgrade and the repairman had my re - installed Windows. I know evil to fix my Internet security software and discovered a list of other problems with missing or corrupt files. After inspecting my system, I discovered that the repairman installed Windows with a product key is counterfeit.

  I have my legitimate Windows 7 Home premium disc and product key. How to re - install Windows 7, because windows fitted by repairer are Home Premium 32 Bit, and Windows I have are Home Premium 64 Bit.
  I would like to do a full install of Windows, I backed up all my data and have all the product keys of software installed on my desktop. What steps to follow to format the hard drive and install Windows 7 Home Premium 64 Bit?

  Boot from the DVD 64 bit Windows 7

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  If you have problems, use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Is it necessary to disable an adobe after effect before formatting a computer?

  Is it necessary to disable an adobe after effect before formatting a computer?

  like my adobe after effect version license & windows suddenly cress & I need to format the pc... then what I do... in this case?

  Yes, you must deactivate your installation before any operation that affects the formatting of your hard drive.

  Mylenium

• Computer won't start windows after SP2 updated which runs without error messages.

  Hello
  I have problem with SP2 update. After correct installation the computer not boot to windows and the screen is black.
  I have toshiba A55 S326 all of origin, on which I replaced HD (now 250 GB) and RAM (1 GB now). In past I have updated the bios to version 1.40 delivered by the producer.
  As I have new HD, I used the factory restore CD for Windows XP Home Edition. I have run all the updates that the system has been to download. Each think worked until I don't have install SP2. After correct instalation without error notice system invited to restart, I have confirmed, but the computer has not started load windows again.
  I tried several times, checked for possible errors, I used Critical Update 885626 before SP2 installin sugested, but all the time, same result. Black screen without loading Windows.
  You pls can someone advise for me what I have to do.
  As I have only the factory recovery disc, I'm not able to run the recovery console, because recovery is formatting disc before editing Windows.
  Can you pls suggest me how to get the WIndows XP or Windows XP Home Edition CD bootable recovery console.
  Thank you.

  Hi sake,.

  Welcome to the Microsoft Answers site.

  (a) you're able to boot in safe mode?

  If you are able to start in safe mode, then I suggest you to start in safe mode and install the recovery console that you already have a disk. See the article mentioned below.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  I suggest you to activate the VGA (Video Graphics Array) mode and check. Follow the steps mentioned below.

  1 restart the computer and press F8 and choose Enable the VGA Mode in the menu options Start early

  Method 1:

  To use the safe mode option, follow these steps:

  1. reboot your computer and start typing the key F8 on your keyboard. Select safe mode from the menu.

  For more information, see the article mentioned below.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Let us know if it works so that we can solve problems more.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start Windows XP. How to format my hard drive and reinstall Windows XP?

  Unable to log on to Windows XP and continues to repeat the initialization. May I know what is happening to my system?

  Dear Sir/Madam,

  I can not even log in to Windows XP, this is why I am not able to access the system restore. Can I know how can I format my hard drive because I can't find all a command 'format '. The system continues to repeat opening a Windows XP session but failed. Help requested to provide your professional advice & solution.

  Yours sincerely,

  Davidaries

  Hello DavidariesGoh

  Reinstall Windows XP
  To reinstall Windows XP, try either of the following methods. If the first method does not work, try the second.
  
  Note You can disconnect from the Internet during the installation. This helps to protect you against malicious users. Method 1: Start the reinstallation of Windows XP to reinstall Windows XP by using the Windows XP CD, follow these steps:

  1. Start your computer.
  2. Insert the Windows XP CD in the CD drive or DVD drive of your computer.
  3. In the Welcome to Windows XP page, click Install Windows XP.
  4. On the welcome page in Windows installation, click upgrade (recommended) in the Type of Installationbox (if it is not already started), and then click Next.
  5. On the license agreement page, click I accept this agreement, and then click Next.
  6. On the your product key page, type the 25-character product key in the product key boxes, and then click Next.
  7. Get the updated Setup files page, select the option you want, and then click Next.
  8. Follow the instructions that appear on the screen to reinstall Windows XP.

  If you completed the reinstallation, congratulations. You are almost finished. Please go to the section "after you have reinstalled Windows XP' at the end.

  If you receive an error or if the reinstallation did not finish, try Method 2. Method 2: Repair install of Windows XP by starting your computer from the Windows XP CD Note if Windows XP was preinstalled on your computer, you may need the installation CD to reinstall. Contact the manufacturer of your computer to make sure that you have the CD for a repair installation.

  To reinstall Windows XP by starting your computer from the Windows XP CD, follow these steps:

  1. Insert the Windows XP CD in your computer's DVD or CD drive, and then restart your computer.
  2. When you receive the message "Press any key to boot from CD" on the screen, press a key to start your computer from the Windows XP CD.
  3. The following message on the Welcome to Setup screen is displayed:
     This part of the Setup program prepares Microsoft Windows XP to your computer: to set up Windows XP now, press ENTER. To repair an installation of Windows XP using the Recovery Console, press R. To quit Setup without installing Windows XP, press F3.
  4. Press ENTER to set up Windows XP.
  5. On the Windows XP licensing agreement screen, press F8 to accept the license agreement.
  6. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
  7. Follow the instructions that appear on the screen to reinstall Windows XP. After repairing Windows XP, you may have to reactivate your copy of Windows XP. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     310064 how to fix Windows XP Setup problems when you upgrade from Windows 98 or Windows Millennium Edition

  If you completed the reinstallation, congratulations. You are almost finished. Please go to the section "after you have reinstalled Windows XP' at the end.

  If you receive an error or reinstallation did not finish, unfortunately, this article did not resolve your problem. For your next steps, you can ask someone you know for help. Or, you can contact Microsoft Support to help you resolve this problem.

  Back to top

  After you have reinstalled Windows XP after completing reinstallation, perform the following final tasks.

  Note You can also turn on the firewall in Internet Explorer. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  283673 how to activate or turn off the firewall in Windows XP

  Reinstall Windows XP Service Pack 2, Windows XP Service Pack 2 (SP2) has been installed on your computer until you have reinstalled Windows XP, you must reinstall SP2. If you do not have already reinstall SP2 with Windows XP in the previous section, use one of the following methods to reinstall SP2 now. To order Windows Service Pack 2 on CD, visit the following Microsoft Web site:

  http://www.Microsoft.com/windowsxp/downloads/updates/SP2/cdorder/en_us/default.mspx

  For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  322389 how to obtain the latest Windows XP service pack

  Reinstall all Windows updates after reinstalling Windows XP, you must reinstall all updates to Windows also. To reinstall Windows updates, visit the Microsoft Web site at the following address:

  http://update.Microsoft.com