Formatting of your desktop with windows 8 oem

Similar Questions

• Set up a wireless HP all-in-one printer on your desktop with Windows XP Pro Version 5.1 SP3

  Recently, I uninstalled Solution Center HP from my desktop PC with Windows XP Pro Version 5.1 SP3.  The program worked very well and was connected wireless to my HP Photosmart all-in-One 309 g.

  Now, when I downloaded the latest software feature full HP and installed, it has completed the installation but could not connect to the wireless printer.  Setting up the wireless printer, he did 'see' the HP 309 g printer and I chose this but it gave me a dialog box saying that there was no installation configuration.  I also, tried the control panel "Add Hardware", but he couldn't 'find' the printer.  What should I do?

  You have an icon for the 309 g Photosmart in Start menu > printers and faxes?

  If so, right-click on it, select Properties, and click the Ports tab.
  By ensuring NOT to click inside the list, use the scroll bar on the right until you see the line highlighted and verified with the port used for this printer.  That said this line in the columns 'Port' and 'Description '?

  Note that you may need to click and drag on the small vertical line between 'Port' and 'Description' in the header line to make the column wide enough to read the entire entry.

  Click Cancel to exit the printer properties dialog box.

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Cannot format drive DVD - Rw with Windows Vista.

  Cannot format drive DVD - Rw with Windows Vista. Download "Windows cannot format... or is unable to complete the format.  Something like that. See a solution with Windows 7, but I use Windows Vista. Help?

  Hello

  ·        What is the model number of your computer?

  ·        Who is the manufacturer of your computer?

  ·        Did you format the disc earlier?

  ·        Are you trying to format the drive using windows Explorer or through third party software?

  I suggest you read the web link, below he provided information related to the formatting of disk.

  http://support.Microsoft.com/kb/930405

  Hope the helps of information. Please post back and we do know.

• This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  I had the hard drive of my worn desk w / Vista HP layout box HD Startech. This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  Hello
  Yes it will work. You can access files on the hard drive but not the Oprating system hard disk previous. The previous hard drive can be used as hard drive.

  I hope this helps.

• What does Err1 and Err3 when you restart your PC with Windows Vista?

  What does Err1 and Err3 when you restart your PC with Windows Vista?

  Hi MichaelNessel,

  1. What is the full error message that you receive?

  2. don't you make changes on the computer before this problem?

  3. What is the brand and model of the computer?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• format a blank disk with Windows 7

  How to format a blank disk with Windows 7?

  Question? Go you into computer, and then right-click the drive has? If not go ahead and do that and then in the list, there should be an option for formatting. Click on format and a window will be displayed, and then select the check boxes that you want to use, and then click the format button. This should be it.

  Hope this helps

• I have a desktop with windows 7 and a linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  Yes, it should work perfectly, if wired (Ethernet) or wireless.

  Click on the network icon in the Notification area

  Click on the available wireless network that you want to connect

  In the list of available wireless networks, click a network, and then click on connect.

  Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.

• Format my old pc with windows xp prof for games

  I would like to format my old pc with legal copy of windows xp prof and maintain your pc for games and old files

  Kindly let me know if I can get the updates before April 8, 2014.

  Hello HKaurND,

  All updates before April 8, 2014 will be always available for download via the Windows updates if you decide to reinstall Windows XP. Thanks to Microsoft to no longer support XP after April 8 you'd be advised to upgrade to a newer version of Windows, i.e. Windows 7/8.1

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Try to format my hard drive with windows xp installed.

  I went to cmd and on c:\ > I typed in format c: it came with the usual caveat. Continue the at I clicked on Y for Yes it came with the format cannot run because the format is used by another process. Format may run if this volume is dismounted first. All handles to this volume would then be invalid.
  You want to force a disassembly on this Volume? y (y/n)
  Cannot lock the drive. The volume is still in use.
  How to unlock the drive or do I have to purchase software that erases my own hd.

  On mon, 19 Sep 2010 19:27:56 + 0000, CurtisJG wrote:

  I went to cmd and on c:\ > I typed in format c: it came with the usual caveat. Continue the at I clicked on Y for Yes it came with the format cannot run because the format is used by another process. Format may run if this volume is dismounted first. All handles to this volume would then be invalid.
  You want to force a disassembly on this Volume? y (y/n)
  Cannot lock the drive. The volume is still in use.
  How to unlock the drive or do I have to purchase software that erases my own hd.

  You cannot format the drive Windows is installed on to in
  Windows. It's like sawing the branch of a tree, you are sitting
  on.

  What is your purpose here? You want to reinstall Windows properly?

  If so, just boot from the Windows CD (any version) and follow the
  guests for a clean install; the installation will begin by
  formatting the drive.

  Ken Blake (MS-MVP)

• install HP Deskjet 3747 on HP h8 - 1010t desktop with windows 7...

  my HP deskjet 3747 is compatible with my new HP h8 - 1010t with Windows 7 desktop?

  Hello

  You printer compatible with Windows7 indeed.

  The drivers are already included in the operating system.

  Follow the steps below to set up your printer with the operating system:

  http://support.HP.com/us-en/document/c01874792

  Kind regards

  Shlomi

• What version of windows is required to upgrade a desktop with Windows ME computer to use wireless internet?

  We have a 2000 Hp desktop computer? with windows ME and just recently had wireless internet access. The system is too obsolete to connect even with our router. Now, what version of Windows is necessary for us to spend to be able to connect?

  Unfortunately, a Windows ME operating system cannot be upgraded.  Its time to recycle that old computer and buy a new one with Windows 7 preinstalled.  Here are a few examples.

• My old desktop with windows xp pre-impasse manufacturer has just failed the test of authenticity

  My old compaq with windows xp pre-impasse manufacturer office just fail the test of authenticity, and I lose the internet connection (even after rebooting).  How can I get this problem?

  I checked that my wireless router works fine so that cable exit/ethernet LAN to my office are also working.

  Help, please!  Is there a toll free number to call?  I'm not too tech-savvy.  Thank you!

  I think that all your problems are caused by infections "hijackware.

  If doing the clean install, etc., is outside your comfort zone - and there is no shame in admitting this isn't your cup of tea - take the computer to a local, reputable and independent (no BigBoxStoreUSA or Geek Squad) computer repair shop... If you think that a 8 + year old computer worth the expense that would be.

• I can run two monitors on a p2-1394 desktop with windows 8?

  My wife recently started home work to do at home, and she asked me if we could run two monitors.  I thought it was easier to ask first to go buy one and then knowledge I can not. Thank you!

  Here are the specifications of your desktop HP p2-1394. Based on the specifications, it has a VGA output (analog) and DVI - D output (digital only). You should be able to use a digital DVI - D monitor and a VGA analog monitor at the same time.

  

  (2) - DVI - D (digital only) (3) - VGA (analog only)

  Please send Bravo

• Re formatted my Dell comes with Windows 7 Pro and when it starts its telling me I need to buy a ket, because mine does not work.

  Why do I get the tp to buy a new key when my 16 code is already on my computer

  A product key is a 25-character. It should be placed on the COA sticker attached to the machine. To reactivate over the telephone.

  To learn more:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/