Formatting PC - drivers?

Similar Questions

• Spectrum Analyzer (Keysight PXA) get the Trace using the binary format

  1. The ASCII format uses drivers. I need binary format. Number of points and many traces.
  
  
  2. This topic in several positions, but do not give a good answer.
  
  
  3. I have attaced my code.
  
  
  4. Visa to read data from binary block. VI has been lifted to another post, but I can't find it to give credit.
  
  
  5. Array of bytes to trace.vi has default data that are extracted from my PXA Spectrum Analyzer. I stole the basic idea, but there is much prettier. To convert the 8-byte doubles, but it doesn't.
  
  
  6. Because I use Windows I use ': FORM:TRACATA %s;: FORM:BORD SWAP; "where %s is real, 64 for the binary data. Don't know if the SWAP is required.
  
  
  7. I have a general idea of how it works, but the details elude me. MSB, LSB exchanged and normal. My eyes is glazed.

  Thanks for any help is good.

  Norm

  Try this. It works well for me.

• Can I use 6 discs in a Mid 2012 Mac Pro Server to?

  I want to consolidate a couple of servers on a Mac Pro Server. I intend to use a disk to store data and the other as backup (simple clones). 6 TB of hard drives compatible with the Mid 2012 Mac Pro?

  Yes with the following conditions:

  -There is a bug in OSX 10.8.4 and later the internal formatting prevents drivers more than 2.2 GB.

  This bug appeared in 10.8.4, and has not yet been set. You can

  using an any older Mac OS X disk utility, your Mac may initially with 10.7.3, 10.8 or 10.8.3 and therefore the 10.6 DVD and so does not work

  Another work around is to move this drive in an external case and delete it there (assuming your case is modern enough to deal with readers more than 2.2 to.

  • When you DELETE a more 2.2 TB drive in an internal drive Bay, it is given the stuff of Logical Volume in Mac OS X 10.8.3 and later versions. Many readers regarded here as a BUG. Logical volume group partitions were not needed and trafficked, re - DELETE and other functions. There are several very different workarounds:

  • Re-CLEAR in a box outside, provided you can accommodate more discs 2.2 TB ("really old" cannot).
  • CLEAR using Mac OS X or Recovery_HD or install predates it 10.8.3
  • Manually delete the partitions of a logical Volume using Terminal Server group.

  -For the mounting of sled internal:

  The penetration of the screw depth for 'down-screw mount adjacent to the platters' on some readers from over 3 TB have been shortened. This may mean that the live sled down until they adjust and begin to compress the washers on the sled. If this is the case, your drive will not rest flat on the sled and do not breed with the connector backplane without additional adjustment.

  OWC now sells sleds that uses different types of mounting holes in the HD to avoid this problem.

  You can shorten the screws, or put a washer under the head to ensure they can be warm in the authorized depth. Also, now OWC/Macsales now sells sleds that use the location of the different types of mounting screws to avoid this problem. However, these sleds are only for the Pros 2009 and subsequent

• HP tm2-1010ea problem with wifi

  all start with replacing the battery, then replacing the ssd

  format / new drivers/windows /.

  and now problems with wifi drops and loose conectivity light is on and after a 30 min close by him self and no connection is any program to test if I need to replace it or?

  OK solution

  Download windows iso version that your computer link is originally (be careful)

  Download clone drive (feeware)

  mount the iso (diferent external drive)

  Start windows to install then start upgrading and connect on the net with an ethernet cable to find the latest files for windows start

  wait...

  a few reboots approx. 1 hour

  for my problem was frame 4.5 has been corrupted and repair windows

• Help me fix driver errors, please

  Hi, there, I got Windows Vista software alerts restore problems on pilots to be fixed and do I need to format these drivers? I have some info on PC restored it.
  Restore method would then execute?
  Thank you.

  Hello

  Unfortunately, it is clear exactly what the issues are.

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Need to format Satellite C850D-119 - where to find the drivers

  Hey,.

  I want to format my Satellite, but I can't find the drivers I need to install later.
  Can someone direct me as to where should I look?

  See you soon

  Satellite C850D-119 is part of the PSCC2E series.

  The drivers are available here:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  Laptop-> Satellite-> Satellite C Series-> 850D-> PSCC2E Satellite

• Pavilion 15 laptop n200si: missing USB drivers after formatting and reloading windows 7 on HP Pavilion 15 computer n200si laptop

  I recently formatted my laptop and reloaded windows 7 and lost my 2 left side USB drivers and the drver HDMI. I tried several searches but come back to the top with nothing every time.

  I managed to get the driver for the HDMI, but still nothing on the 2 USB ports.

  in Device Manager, USB 2 ports are yellow! in a triangle. I tried to update the drivers from there and on the HP support assistant.

  the hardware for 1 USB ID is:

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2163103C & REV_04

  PCI\VEN_8086 & DEV_9C31 & SUBSYS_2163103C

  PCI\VEN_8086 & DEV_9C31 & CC_0C0330

  PCI\VEN_8086 & DEV_9C31 & CC_0C03

  other USB hardware ID is:

  ACPI\HPQ6007

  * HPQ6007

  your help would be greatly appreciated as I need to be able to work with these USB ports and cant gt by just one.

  Thank you and looking forward to the help

  Stuart

  Hello

  The usb 3.0 driver, try the following.

  https://Downloadcenter.Intel.com/download/22824

  The second hardware id is for HP 3D DriveGuard.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71811.exe

  Kind regards

  DP - K

• recently I formatted my pc and installed all the drivers, but my pc shows no device installed channel?

  I formatted my computer and install windows xp and I installed all the drivers, including the audio driver and it asked me to restart my pc after installing the audio driver. Later, when I tried to play the song on pc then Windows media player displays an error not saying no audio device installed... I almost tried everything but nothing is done... there no sound option in Device Manager and I'm really scared... what to do now? Help, please

  Seriously? Not really... it's just a matter of eliminating the current
  sound card and install a new one.

  If you're not a repair person computer DIY that it would be
  be the best if you take it to a professional.

  They might find that you don't need even a new sound card.

  And, the following links will give you an idea what it is:

  Windows XP - How to install a sound card
  http://www.LIUtilities.com/how-to/install-a-sound-card/

  Windows Vista - install or remove a sound card
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-or-remove-a-sound-card

  Windows 7 - install or remove a sound card
  http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-sound-card

• I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  You may be able to download the drivers from the web site of the manufacturer of the computer.

• After formatting my machine from CD is listed and no BONES are found. Also get the message "If you do not see os click Download the drivers for the hard disk.

  Lost everything of major problems - AutoFormat - lost Boot Manager!

  After that formatting machine - loaded from CD - recovery of language system, etc. - repair pc - nothing in there changed no bones no partitions not location - request if you do not see the bones click on download drivers for hard drive - those who? help please

  If you have formatted your drive, there is nothing.  You will need to do a clean install of vista.

• Can I request a new installation for Vista disk and drivers of my laptop after formatting my hard drive?

  I have a stubborn reality and impossible to get rid of the virus on my main hard drive and I think to format and to nine.  I want to know if there is a way to get a new installation of Vista for a clean install disc and a disk for the drivers of my laptop.

  Other info: number of grain of Vista is ripped but I have the model number for my laptop if that should be necessary.

  Hello

  After you have lost your product key shrinks your methods

  key finder programs won't asssit you if it is preinstalled

  Here are the different ways let you reinstall vista;

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Problems with drivers after formatting

  Hello

  First excuse my English, I'm only a French.

  So, I need your help because I just decided to format my T60p (2007-CTO), not with the CD of lenovo, but with only the CD of XP SP2.

  After that, I downloaded drivers on lenovo Web site and run them. But I have already some problems (no sound for example) and when I go into the properties of the office, in the management of devices, he notices me I have some devices not recognized (with a yellow "?" in "other devices"). Here is the list of the drivers that does not recognize:

  -BCM2045B

  -Biometric coprocessor

  -SM bus controller

  -Audio device on High Definition Audio bus

  -Unknown device

  -Device modem on High Definition Audio bus

  However, I have downloaded all the drivers there I think, so I don't understand. I put you below a list of all the drivers that I have installed, in the order that I have installed (with the reference number of the driver, as we have by downloading on the lenovo website and the description of the driver):

  -kb888111xp2fr - class driver Universal Audio Architecture (UAA) High Definition Audio (Q888111)

  -7kra26ww - Intel PRO - 1000 LAN adapter software

  WindowsInstaller-KB893803-v2 - x 86 (not a driver lenovo but necessary for following drivers)

  -dotnetfx35setup (not a driver lenovo but necessary for following drivers)

  -6ju708ww - Power-Manager

  driver ThinkPad Power Management - 6hku07ww-

  driver Hotkey - 6jvu34ww-

  -6hcx41ww - ThinkVantage Access Connections

  -6asa52ww - ThinkVantage Active Protection System

  -6mwc15ww - Intel Wireless LAN (abgn, abg, bg)

  Cingular Wireless WAN - 7cwc05ww - adapter software

  driver Modem - 7fma13ww-

  -7igu07ww - UltraNav driver

  Driver Interface System - 7jif12ww - Lenovo

  Bluetooth - 7kbf02ww - data rate improved Firmware update

  -7kts04ww - ThinkPad BIOS settings Windows

  Bluetooth - 7vba14ww - with II enhanced data rate software

  -7vgq12ww - UltraNav utility

  ThinkVantage Productivity Center - 7vuy02ew - Pack

  Audio - 77a224ww - XI

  -77bm03ww - file Microsoft Bluetooth Support Bluetooth with Enhanced Data Rate

  -77gr09ww - UltraNav Wizard

  Driver Interface System - 79d179ww - Lenovo

  -79oi18ww - monitor file (before the video driver Installer)

  utility to update the BIOS - 79uj32us-

  Verizon Wireless WAN - 79wc17ww - adapter software

  -oss608ww - Intel chipsets Support

  I think that just the order is important until the pilot "ThinkVantage Access Connections" because I read once downloaded drivers that some necessary drivers installed at the top of the list.

  If someone (who can understand my bad English) can help me to install the drivers that I miss, it will be very nice :-)

  Thank you

  1. just something checkin: Lenovo driver facilities require two steps 1. Extract 2. Install. When you double-click on the driver download are extracted, usually in a C:\DRIVERS folder. Then you go to this directory and run the Setup program, usually setup.exe. The directory and installation method may vary - check the installation instructions. You do the two steps?

  2. why not use ThinkVantage System Update?

• Formatted my laptop and can't find drivers to connect to internet

  Product name: g7-1107se
  Series: {information}
  Product: lz590ea #abv

  Hello
  I just formatted my laptop yesterday, and I am not able to connect to wireless internet. The wireless on the corner of my desktop icon does not appear. I tried to download the drivers for my Pavilion g 7, but no luck.
  In addition, I also miss the driver for the mouse pad.
  I would appreciate your help.

  Hello:

  The first ID that you posted is for the wired network, a wireless card.

  First install the driver for the smbus controller and reboot.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94402-1&cc=us&DLC=en&LC=en&OS=4063&product=5116880&sw_lang=

  Then, install the graphics driver for the ID PCI\VEN_1002 & DEV_6760:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99756-1&cc=us&DLC=en&LC=en&OS=4063&product=5116880&sw_lang=

  The wired network adapter driver is this one.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100017-1&cc=us&DLC=en&LC=en&OS=4063&product=5116880&sw_lang=

  The wireless network adapter will be listed in the other devices category in device like a network controller Manager.

  That's what I need the ID of the hardware of to get the driver for the wireless card your model uses.

• T500: Format and install XP-32 pro-life drivers?

  I just bought a T500 and want to format the hard drive, remove the partitions and install my own copy of Windows XP Pro 32-bit.

  I would like to get all the relevant drivers.  When I go to

  http://www-307.IBM.com/PC/support/site.WSS/product.do?brandind=10&familyind=422608&machineind=427443...

  He asked that 'Type '.  Where can I find it?

  Moderator Note: Type added to the line object for clarity.

  You can find it on the bottom of your laptop on the right of the thumbnail next to the serial number. It might be in a four-number format (type), followed of a three characters (numbers or alphabets which is the model)... like these for example 2767-12U or 2261-CTO etc.

• do I need to backup drivers if I want to format and reinstall windows 7?

  My laptop already has OS "windows 7", but it is slow and has problems with gel
  If I want to format it and install clean (windows 7) and I have the CD and everything
  and I backed up every thing I want, documents, pictures, music, videos, etc. on an external hard drive
  My question is, do I need to backup the drivers?
  If so, HOW ?
  citing again once I want to format the entire hard drive of the laptop

  Hello S.e.91,

  If you have a full retail version of Windows 7 to install. There is no need to format, Windows 7 will do all the necessary work. All the necessary drivers for the operating system will be loaded directly from the Windows installation disc. After installation, you will begin to install other software that you have purchased; all the necessary drivers for this third party software will be, once again, from the software disc.

  If you have an upgrade copy of Windows, you must install an earlier version of Vista, of Windows before moving on to a more recent version of Windows.

  If you install a full commercial copy (in other words you bought yourself a converted copy of the operating system) you can find this link on my site useful: http://winuser.co.uk/09_installing_windows_7.aspx

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com