Media Player does not start after loading Media Feature Pack for Windows 7 N

Similar Questions

• Windows 7 - Media Player does not start after the upgrade. Cannot update Windows media player either

  I have long used now on Windows 7, Windows media Player and just got an update from Micorsoft. Set, now when I try to open the drive it tells me the the wmplayer file has a version number of 12.07600.16415 where 12.0.7600.16667 was expected.

  Windows media player is not adequately at a standstill and must be reienstalled.

  Then wonder if I want to install the player from the microsoft Web site. When I check the Yes box, I go to the site and he informs me that the version that I already paid for only a few months ago on my computer because my computer is relativley new, cannot be downloaded.

  There are no other options to fix the problem that caused Microsoft with the update. I tried to do a restore but it then cause a problem which made the player doesn't do not not the CD to record the right as he said that I had to get the new drivers that microsft does not automatically download drivers when they remove them in this process. But again, no tell me what I need drivers. I tried to switch on my computer systems and to find them this way, but it says I have already that I need on my computer?

  What should I do? I need this ASAP as I am a singer and rely on this process for my concerts and other...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm trying to download the media feature pack for windows 7n and it tell me to validate using GenuineCheck, but when I do it says that I should download the most recent version uses 64-bit window 7n

  I'm trying to download the media feature pack for windows 7n and it tell me to validate using GenuineCheck, but when I do it says that I should download the most recent version uses 64-bit window 7n

  You must use internet explore 32 bit.

• HP Dv6 6 c 50: laptop does not start after interruption of the upgrade of windows 10

  I was upgrading my system Windows 10 free upgrade offered by Microsoft. After completing the download of the system has been installed. When close to 50% of the installation is complete the computer turns off because the battery has been cut. "When I connected on the power of the screen said" back to your previous version of windows. Then a message popped up that PC start up failed and u first "Startup Repair". I went for the option and a widow open saying: "Startup Repair is checking your system for problems... Attempt to repair ". This is the case for the last many hours and there is no progress. If I have to cancel it is said that Startup Repair cannot be cancelled. Please can someone tell me what I'll do. I created back to the top of one of my data.

  Thanks in advance

  Hi @Faiza1,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP Pavilion Notebook dv6-6c50se and the system failed on Windows 10 upgrade. Here is a link to perform a HP for Windows 7 system recovery. In this document, it shows you the screen I need immediate help, this section, use the Microsoft System Restore.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Please let me know how it goes.

  Thank you.

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• New player does not start after cloning?

  I'm having some problems with my hard drive, so I decided to install a new larger hard drive. I cloned my drive C using Macrium Reflect Free Edition and at first, it seemed to clone OK although I noticed that the old drive was 10mgb of used space is superior to the other.

  When I disconnected my old drive and I tried to boot from the new drive, I had a Manager directed black screen startup (?) asks me to insert a system disk and choose repair. Also, the screen said "boot selection failed because a required device is not accessible."

  When I tried to start using the drive of W7, I got the same black screen.

  If I boot using the old drive I see the new disk in drive F and it seems that all my files are there, and I can access, the data files and the system.

  When I opened disk management, both drives are shown however:

  Drive C (the old disk) Watch - healthy (System, boot, Page file, Active, Crash Dump. Primary partition).

  Drive F (the new drive)) shows only - healthy (active, primary Partition).

  Then of course some files, including the MBR were not copied. How can I copy these files to my new drive so that it starts?

  Thank you

  Tony

  Thank you for that. I had problems to get the PC to boot from the CD using the W7 installation disc but I used the recovery disc Macrium and who recreated the MBR and now everything goes well :-)

  Thanks again

  Tony

• My phone is lock and does not start after you install an update to Windows.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  Boots systems and load normally until the display of connection where instead of the login screen, I show the screen updated frozen on "Installing part 3/3 (0%) update." The laptop stays on this screen, with the cursor froze with a loading icon, for about half a minute until the screen shuts off and reboots the system, put the system in a loop, I can't on.

  I tried: turning off on and powered. using advanced boot options to open the system to all types of 'Safe Mode' and leaving the laptop for some time before trying to turn on the system again. All these things have not worked and the system remains in the lock down.

  I wonder if it is a common problem after the latest Vista updates or if it is more specific to my laptop. Whatever it is, any kind of feedback and advice would be most appreciated.

  Thank you.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  "part 3/3 (0%) update installation." ... and restart the system.

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >

• does not start after the update of configuration in windows 8

  I have a laptop of hp 2000 and he went to the update and when it restarted, there's just "prepares configure windows updates" and I rebooted several times, and then he said failed, rrestarted himself, but then just sat there again, he sstaysthere day, also has a disc of windows 7 even if the screen of its windows 8 to see if I could implement a restore but still nothing

  Too bad my girlfriend fixed, it

• Windows Media Player does not start, and the accidents of life Mail

  Hi all

  I have a problem: I'm using Vista Home Basic version US, MS 2 MS and my Windows Media Player does not start, Windows life Mail (worm 2009) crashes when I want to write a new e-mail message and does not work Windows 7 Upgrade advisor. So there must be a common problem.
  Any suggestions how to solve this problem would be highly appreciated.
  Marek Köter

  Hi Marek D,.

  A. what happens when you start the media player?

  B. what happens when you run the Upgrade Advisor?

  C. when he last work very well?

  D. recent changes made on your computer?

  E. you get any error message?

  Please answer in return.

  For issues related to windows live mail, you can post your queries to the discussion of direct mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Bindu S - Microsoft Support

• CD player does not start automatically

  HP Presario CQ71-140EA;  Windows 7 Professional.

  When you insert a CD into the CD player, that player does not start automatically.

  I have to launch Windows Media Player or iTunes before CD games.  Any ideas please?

  Hello:

  Please see if this tutorial will solve your problem.

  http://windows7support247.blogspot.com/2010/12/how-to-enable-or-disable-Autorun-for.html

  Paul

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• Does not start after the upgrade to 1.5.

  Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

  All ideas

  No problems in the past with edge since September 2012.

  =============

  Laptop HP Pavilion dv7-2185dx

  Dv7-2185dx product name

  #ABA product number NV023UA

  Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

  The microprocessor Cache L2 6 MB Cache memory

  6144 MB of memory

  Memory Max 8192MB

  Graphic ATI Mobility Radeon HD 4650 (M96)

  Video memory up to 2815 MB (1024 MB dedicated)

  500 GB (5400 RPM) hard drive

  Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

  17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

  Fax/Modem high speed 56 k modem

  Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

  Wireless Connectivity Intel WiFi Link 5100AGN

  The Altec Lansing SRS Premium Sound technology with subwoofer

  101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

  Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

  External ports

  5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

  4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

  2 headphone

  1 microphone input

  HDMI

  1 VGA (15-pin)

  eSATA + USB 2.0

  1 RJ-11 (modem)

  1 RJ - 45 (LAN)

  expansion port for computer 1 cell 3

  1 IEEE 1394

  irewire (4 pin)

  1 consumer IR (remote receiver)

  Other devices HP Webcam with integrated digital microphone

  Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

  Weight lbs 7,74

  Housing for Kensington MicroSaver Security lock

  Turn on the password

  Accepts 3rd party locking safety devices

  Software

  Operating system:

  Genuine Windows Vista Home Premium 64-bit with Service Pack 1

  
  

  Hi, people.

  I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

  Thank you

  -Elaine

• Computer does not start after the screen goes blank & Compaq.

  Hello

  A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.

  History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.

  I tried the following:

  Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.

  Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)

  Remove the battery of the BIOS for half a day

  Move jumpers CMOS from1, 2 to 2, 3 positions

  I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.

  Specifications of the computer

  Compaq Presario SR1629UK desktop PC

  Details can be found in the following link

  http://support.HP.com/us-en/document/c00579251

  Your help would me much appreciated...

  Hi guys,.

  Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.

  When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• HP DV7-7259nr does not start after the BIOS update

  Hello

  I have a problem with my HP DV7-7259nr laptop, WIN8 running: it does not start after tune recommended to update BIOS and drivers.

  It downloaded all the drivers and started installing at one time, he asked for a reboot, click OK and the BIOS update has begun to load. The process ended successfully and after the reboot that my laptop wouldn't start; everything is black and the cooler is runing.

  I tried:

  -battery disconnected and power - button Power - plugged power again-> NOTHING

  -Windows key + B + Power button--> nothing

  Please help as this is the laptop I use daily in my work.

  Thank you

  If you install the electro mechanical original hard drive in it starts?

  If it has been delivered with a SSD?

  The specifications indicate that an electromechanical drive was part of the specification.

  

  This is where lies the UEFI environment. It is actually on the hard drive.