Former driver of the camera - PDR - M65

Similar Questions

• Tried to install the driver for the Cam, and he said that he could not? Installed something, but I don't see it installed?

  Tonight I tried to install a driver for the Cam ti and he could not. Instead, he made somewhere, but I can't. And it does not appear as a program installed or peripheral? The driver I have is a Driver USB PC Camera. REV:168 H. For Windows 98.

  Hello

  1. you receive an error message on the computer?
  2. What is the brand and model of the Webcam then?

  Perform a clean boot and then try to update the driver compatible with vista on the manufacturer's Web site.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.
  Check out the link to update the drivers.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• The original driver of the camera again (which should be listed under portable devices) is missing

  I'm trying to get my Canon PowerShot A4000 IS to connect to my computer Dell Inspiron A537.  It has a Vista x 64 SP2 operating system.  When I plug the camera in I get a message that a device driver is required.   He research and can't find anything.   I contacted Canon.  They say that there should be a device driver built into Vista in the category of portable devices.  He isn't here.  I suspect that this was deleted when my daughter tried to connect his phone I some time ago.  How can I fix it?  I tried the program of Mr. Fixit in the support section.  Found problems, it could not fix them.

  All ideas

  Try this:

  Go to Device Manager and find the device that may be under 'Other devices', ' unknown devices "USB controllers" or "Hard drives" category. " It should have a yellow triangle with an exclamation mark. Right-click on it and click on "Update driver software..." The next box, click 'Browse my computer for driver software', then navigate to C:\WINDOWS\System32, click on the OK button and make sure the front box "include subfolders is selected', click 'Next' button and let windows install the driver.

• external hard drive, because the camera into iMovie

  Hello

  I like to shoot loads of video and save these images on a hard disk to use later.  I just started using iMovie 10.

  Last night I tried to import video from my external hard drive... but... iMovie it reads like a camera.  Is very annoying because it searches the disk for video... but there's also a few records that might be inside other folders.  (I like to organize pictures by date... etc.)

  It seems to me that an external hard drive to be read the same as my hard drive... so I can click Open and navigate to the location I wanted, then select only the videos that I want to.

  Is there a way to change this?  It is not logical at all that an external hard drive is read as a camera. (See the image below.  Storage is not a camera! )

  Thank you!!

  

  If you copy a camera directory in the root of a disk-level external hard iMovie assumes that it is connected to a camera or SD card.  To avoid this simply move the video camera on your external drive folder in an enveloping folder.

  Geoff.

• The camera USB driver

  My guard computer crashing, either go to the blue screen or gel so bad that I have to press the power button. Then windows troubleshooting tells me that the problem is due to a camera USB driver, but she doesn't tell me how to remove it. When I try to find this driver, I can't. Can someone give me some ideas on removing this driver? Please keep in mind that I am barely computer literate.

  Hello

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  If you still bluescreens then so tell us BCCode or Code numbers to stop.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to change the Windows settings to allow for the camera driver must be installed

  My laptop doesn't recognize my digital camera. The correct software is responsible for the camera. An error message indicates that Windows will not allow access to the driver. How can I change the settings in Windows so that the driver for the camera is recognized?

  Help please!

  Hi Brian,.

  1. are you able to install all device drivers?
  2. which antivirus program is installed on your computer?
  3. don't you make changes to the computer before the show?

  The question seems to be as a program is blocked.
  I suggest you perform the clean boot and check if the problem persists. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps.

• Need software/drivers for the Cam MiniDV DCR-TRV25

  I have owned one of these great little cameras Sony miniDV since 2003 - in fact I love it so much, I bought a 'reserve' on ebay a few months ago.

  The problem is when my laptop crashed, I lost the initial load of the original factory driver for the camera software... and I can't find the original anywhere drive. None of my web searches have found links to reload the driver.

  Even more amazing, I started using Sony Vegas Movie Studio clean - but it plain refuses to import video from his OWN camera - saying that it does not recognize the device.

  What are my options and alternatives for this?

  NC to LB, CA

  Hello. For your computer to recognize the device, if it was recognized before, would mean that either your use of Windows XP or an older operating system. Unfortunately, USB streaming is not supported by Windows Vista, Windows 7 and Mac. But using a different connection: IEEE1394 (i.link or firewire) connection it should work with these operating systems. Going up that probably you just need to install the driver for the camera, you should be able to get it here:

  http://eSupport.Sony.com/us/Perl/SWU-Li... l = DCRTRV25

  Select your operating system from the menu drop down and download and install the device driver (Driver USB for Connection). Make sure that the camcorder is not connected to your computer while installing the driver. Follow the instructions below the USB driver for the login page properly install the driver. Restart the computer and connect the camcorder. Complete the installation of new hardware found. Also make sure that your camcorder USB Stream function is set on IT. Use the application pre-installed Windows Movie Maker or compatible video capture software to capture video to off the Strip. I hope this helps.

• HP Pavilion Notebook 15-p004nx: problem in the camera into my laptop

  day support:

  I have problem in this laptop:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model...

  My laptop was have windwos 8 instilled on it then I want windwos 7 and all work well only the camera did not work well... I have download the drivers from the above link but I do not see any driver on the camera just this one:

  "Cyberlink YouCam software."

  I know this is the program I download and it gives me this error:

  http://i.imgur.com/YBKrHkj.PNG

  My camera driver:

  http://i.imgur.com/o4aSx5E.PNG

  Control Panel features:

  http://i.imgur.com/j1gQqOe.PNG

  help me and thanks a lot.

  Hello @TheWolfYo,

  Thanks for the quick response!

  If you have exhausted all the solutions mentioned above, then you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Kind regards!

• Can not find the driver for the webcam

  Hello

  I have a laptop Sony Vaio VGN - CR407E Windows Vista.
  My friend has downloaded a Ubuntu on my computer and the webcam was working as usual, and then one day I couldn't use the camera more; I don't really know how it happened. Can someone help me please?
  See you soon,.
  Raphael

  Hi, Raphael,.

  There is a driver of the camera listed here.  Bookmark this page - what are the drivers for your unit

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=VGNCR407E&template_id=1&Region_ID=1&tab=download#/downloadTab

  You have an app called cheese in your list of Ubuntu?  Try running.

  Cheese is a webcam application that supports image and video capture.

• use the camera inbulit of computer laptop sony vaio cs

  use the camera inbulit of computer laptop sony vaio cs

  Hey Dr. Anil.V. George,
   
  Welcome to Microsoft Vista Forum!
   
  You need to install windows live messenger to use the webcam to not being able to video chat or use a video recorder to third parties to use the webcam.
   
  I recommend you consult the following link for more information on the use of the webcam:
  http://www.Microsoft.com/Canada/Home/communications-and-mobility/articles/webcam-basics-how-do-they-work.aspx

  If the latest driver updates are required, you can also check the manufacturer's Web site to download the latest version of the driver for the camera for the edition of Windows Vista installed on the computer, or if you have received a Driver from Sony disk, you can try to install the drivers for the camera using the disc.
   
  Hope this information is useful.
   
  Let me know if it worked.

  With regard to:

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Have P6860FX gateway with the camera, but cant fint any to actavate it nothing in the programs etc.

  I see nothing installed on starting camera etc.

  Hello

  If below does not work you need to involve support technique Gateway and check with their online
  documentation and forums (if any).

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite L300 - driver Open Webcam fail. Restart the computer or the camera

  Hello

  I recently bought a new Satellite L300 under Windows Vista Home Premium SP1. The Webcam worked fine for a few days and then the next time I booted up Vista, I get the following error "Webcam driver open fail, please restart camera or computer. Since the computer is new I reformatted to see if it wasn t a program is blocking something.

  Reformat 2 times and the error still ride on the installation of the Camera Assistant Software for Toshiba. I downloaded the update from Toshiba support file but still the same error. The funny thing is that the Device Manager does not detect even the webcam. There is no registration for the webcam. How will I know that it is a hardware problem? Does anyone have experience with this problem?

  The store that I bought it offered to give me a new, but do not have any in stock, so I have to wait 3 weeks.

  Thank you

  Hello

  The webcam must be listed in the Device Manager. It s not called not webcam but you should find it in the imagery of the devices-> USB video device

  The webcam should work fine. Usually after installing the webcam software, you should find the webcam software in the MSCONFIG-> startup
  If the webcam is listed here then that would mean that the software/driver webcam still load during a laptop boot procedure.

  In some cases there could be a compatibility issue between this software and a 3rd party applications like MS messenger or Skype for example.

  In your case, I recommend you to disable the webcam and other applications such as MS messenger or Skype software in MSCONFIG-> startup.
  Then clean the BONES and the registry using the CCLeaner.

  I also recommend the Vista update to the last State. All fixes and patches must be installed!

  Finally if you want to use the webcam then you could start the software manually.
  Exe file must be placed in Camera Assistant Software.

  Best regards

• Satellite L650D Webcam driver open fail. Restart the computer or the camera

  Hello, I did a clean install of windows 7 x64bit installed the driver for the webcam, but I can not use my camera I have Webcam driver open fail. Restart the unit photo or computer... can someone help me?

  Hello

  I think the problem is the new facility
  You must install the VAP (value added package) first more I recommend to choose the latest version of the driver/software webcam
  In the driver Satellite L770D download area you can find the Webcam driver v 2.0.0.21 for Win7 64 bit

• the camera for hdr hc3 driver

  Driver for HDR HC3

  The drivers for the USB connection are usually pre-installed on your computer. No driver is required if you connect the camera using an i.LINK connection. you just need a video editing software that will capture video from the camcorder.

  Please note that the USB connection can only be used in the transfer of images stored on a Memory Stick inserted in the camcorder.

  If my post answered your question, please mark it as "accept as a Solution.

• I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive. Is there a way to recover?

  I accidently deleted pictures from the camera chip while it was in drive d:, but before that I copied them to the hard drive.  Is there a way to recover?

  Hello

  What version of Windows are you using?

  If it is deleted from the memory card, it can not be recovered. However, there are some third-party applications or the tool that will help you recover photos. If you have saved the pictures on the hard drive and deleted, so you can check in the trash.

  See also:

  http://social.msdn.Microsoft.com/forums/en-us/olsbgeneral/thread/10ef8d69-1049-49D3-9957-9e07d5ed5804/

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.