Formerly peripheral usb stop recognized

Can someone tell me what are the INF files are responsible for the generic recognition USB deviecs, such as USB hubs and the HID devices (keyboard, mouse,...), or what else might have broken into my system that causes the following symptoms?

For a long time, my system has ceased to recognize some, but not all USB devices.  USB ports are fine, he reads the device descriptors but then said that material is unknown or says that it cannot find a driver for it.

The second symptom that must have started at the same time, it is that he "forgets" on some USB devices that have always worked well before, with the same result: suddenly is 'unknown' or 'impossible to find a driver.

Two weeks ago, it was my keyboard.  He has always worked when I logged in (it had, I used it my password).  Immediately after logging in, the new found hardware thing jumped upward, within a few seconds it says that it is impossible to install my new hardware, and at that time, my keyboard no longer works.  Never found a solution, I have been using a PS2 keyboard instead. I tried other USB keyboards, he did not identify any of them.

Yesterday was my monitor's built-in USB hub that suddenly transformed into an 'unknown device', and nothing that I connect it is no longer detected. The only thing that is always good for now is as a power source to recharge my cell phone.

To try to fix that, I launched the Device Manager and let him to search for new hardware.  Result: instead of my USB hub starts working again, my Logitech wireless mouse stopped working. The 'USB receiver' now appears with an exclamation point, "the drivers for this device are not installed.  It worked fine for a few seconds before.

Now I'm back with a wired USB mouse, but I wonder how long it will continue to work.

[Edit] Until someone suggests: I tried a few things that I found on the web as suggestions for similar problems.

* Reinstalled the Intel chipset drivers.

* In device manager, uninstalled all the USB controllers and let the system re - detect the.

It changed nothing.

[Edit 2] I still had a "Microsoft Wireless Intellimouse Explorer 2.0' (long name for a small thing) lying around.  The wireless receiver is always recognized, that's just the Logitech "unified receiver ' of my Logitech M510, which is not. It is not the receiver who is at fault: when I plug it in, it appears in device management with the right name and the device ID USB\VID_046D & PID_C52B & REV_1201 - USB\VID_046D & PID_C52B and status "the drivers for this device are not installed. (Code 28) ».

* Fixed! *

If we compare the %SystemRoot%\Inf contents to another system to Win7-64, I noticed this USB file. Missing info.  Copied to the system, the Device Manager started and re-installed drivers for non-working devices, and the problem is solved.

Tags: Windows

Similar Questions

  • Wireless G USB adapt WUSB54GC - peripheral USB not recognized

    I'm guessing that it's version 1, because it is not any version number, written on the back...

    in any case, the adapter is used since December 2008 and had no problems before...

    it suddenly stopped working and gives the 'USB device' ball not recognized on a Vista laptop...

    I tried on another laptop and the result is the same, I tried to reinstall the drivers from the CD and that I got on the linksys website, it still does not work...

    the unit ran his life already?

    As the card is not getting detected and you have tried it on two different machines, it seems that the device is defective.

  • Driver webcam, peripheral USB not recognized?

    I have the MSI WIND U135. I use Windows XP and everytime I turn on my webcam, it comes up with the bubble yellow saying: USB device not recognized. In Device Manager, I usually have a scanner and camera tab, but I have now.  I don't know what to do. Thanks in advance for the help.

    Hello Megan, you can resolve this problem by updating the drivers...

    Download each of these files and right-click on it and click on extract all. Then go to the folder and run the Setup file and follow the instructions.
    Each of them, install in the order that they are listed below.

    After installation, restart your PC, and it should work.
    If it does not, then there is a hardware failure in an integrated device. If it is under warranty, you can get it checked by the manufacturer.

  • Error HP Deskjet F2280 peripheral USB not recognized.

    Original title: How can I get my printer recognized. When I turn my printer I get the error notice following (USB device not recognized). I'm working on Windows XP.

    It was working fine until last week when he suddenly showed the error notice. It's a HP Deskjet F2280. I've uninstalled and reinstalled it but no luck.

    Hello

    Is the issue limited to this device only or you get the message with other USB devices as well?

    Method 1: Remove and reinstall all USB controllers

    To remove and reinstall all USB controllers, follow the steps mentioned below:

    a. click Startand click run, type devmgmt.msc in the Open box, and then press ENTER.

    b. expand Bus USB controllers.

    c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    d. restart the computer.

    e. plug the removable USB storage device and then check if the problem is resolved.

    Method 2: Install the latest drivers

    Download the latest version of the driver from the below website and install it:

    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=3390947#N385.

    Method 3: Update the drivers for the chipset of the motherboard

    See the following site:

    How to manage devices in Windows XP

    http://support.microsoft.com/kb/283658.

  • USB port problem - peripheral usb not recognized for what I plug

    When any device is plugged into usb port (ipod, camera, printer, etc.). I get the message "usb device not recognize."

    All the usb drivers have been updated, but I still receive the message.

    Hello, just for your info. I ran the patch program, but it didn't really do anything but say I had a problem with something and I had to pay someone to watch. Someone I know told me that the last thing that I had loaded several days before the problem was probably the problem. The only thing that was new was Avast program, so I uninstalled. But this does not work, I still had the usb problem before and after I reinstalled it. Also, I discovered that I had a problem to interface with Avast and after repeatedly talking about them and trying hard and it doesn't work, they wanted me to use their special program program uninstall in safe mode and uninstall Avast. So I did, then I reinstalled it and it fixed the problem to interface with Avast. Then a few hours later, I tried to use my usb ports again, just for the * of it. And quess what, they worked. Yes in some way the avast program stopped my work usb ports, when I installed it first. Avast said he couldn't have their summer program? Well it works now anyway. Thank you, Greg

  • Peripheral USB not recognized then try to install a new printer

    can help me to answer why the message by message "unrecognized USB device" displays when I try to connect a usb cable, when I was trying installs a new printer?

    Hello

    Usually extended as printer USB devices should be delivered with an installation CD or drivers. You should check if you have this CD, and then install the necessary software.
    In addition, you can also disable the safe option of feeding in the USB root hub properties.

  • How difficult peripheral USB not recognized without restarting

    Hello

    Sometimes, when I re plug a USB 2 or 3 times, appear a notification message (unrecognized USB device...) and I have to restart my computer to make it work again.
    I want to know how to fix this problem without having to restart my computer and I don't want the solution when I uninstall all devices in Device Manager, because other usb devices can be connected and working at the same time, I can perhaps just to restart a service or kill a process...?

    Hello

    -Did you do any changes made on the computewr before this problem?
     
    Method 1: I suggest you to run the troubleshooter in the below mentioned link and check.
     
    Method 2: I suggest update you also the chipset and other drivers from the website manufactuerr and check.
    Updated a hardware driver that is not working properly
     
    For reference:
    Tips for solving problems with USB (Applicable for Windows 7) devices
     
    Hope this information helps.

  • Microsoft kinect v2 - peripheral USB not recognized

    I bought a kinect v2

    When it is connected to "the USB device that you connected to this computer has malfunctioned...". »

    the Kinect v2 configuration auditor gave me this warning for the USB3 port:

    "USB 3.0 support port detected with unknown bandwidth. Kinect may or may not be compatible with your hardware.

    the kinect is the microsoft version, not the version of the xbox.

    solved! must use the cable out of the box

  • Peripheral intermittent USB not recognized problem in loop

    Hello

    I have a Dell Precision M6500 laptop in a docking station with a USB keyboard and mouse attached running Win 7 Pro 64 bit.  Most of the time, the machine works fine without any problems, but sometimes, Windows will in this tight where loop every few seconds, it appears the dreaded ball peripheral USB not recognized - even if I have not added/changed and the USB device on the machine.  I tried to disable the device, uninstall the driver, etc, but nothing I do seems to fix the problem.

    Please help because it drives me crazy.

    Thank you

    Robert

    It turns out that Dell thinks it's a hardware problem.  Theyu replaced the docking last week and that made it better for 3 or 4 days, but now he's back.  They will replace the motherboard this week, so we'll see...

  • My computer has stopped recognizing the HP7450 printer, although showing the connection to the USB "ready".

    My computer has stopped recognizing the printer plugged in usb port

    Hello

    ·        You are able to print a test page for your printer?

    You can try the suggestion given in the article below and check if that helps get the printer to work.

    http://support.Microsoft.com/kb/308028

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • USB port stopped recognizing devices!

    My USB port just stopped recognizing devices more. Whenever I have troubleshoot the problem it says driver Intel (r) 5 series/3400 series does not work. You must reinstall it. I do it but things remain always the same. Everything on my laptop is now up-to-date.

    Update: my USB problem was solved by freezing Asus USBbooster and disabling Asus power management. After unstalling the USB drivers and restarted, the drivers were automatically reinstalled by Windows and everything was working properly.

  • USB device not recognized. -"peripheral USB attached to this computer has a malfunction and Windows does not recognize it."

    My phone displays a warning that a "peripheral USB attached to this computer has a malfunction and Windows does not recognize it." I uninstalled the only devices that I had (printer and bluetooth) but still this warning. Can anyone help.

    Mike S.

    I suggest to take a look at the following Web sites and follow their advice:

    http://support.Microsoft.com/kb/871233

    http://support.Microsoft.com/kb/310575

    http://support.Microsoft.com/kb/314464

  • PC stopped recognizing 3.5 hard drive external Toshiba

    Hi all

    I have a 3.5/250 GB Toshiba hard drive external. I use Windows XP as my operating system and for some reason, my PC stopped recognizing saying 'USB not recognized '.
    It is supposed to be taken & play and I'm sure that I didn't have a driver, when I installed it.
    If anyone can help or has any suggestions, I would be grateful.

    Thank you

    Malc

    Hallo Malc

    It is possible that you have removed the external device without using the option remove the device safely. Restart the machine and try again.

    Otherwise, you can remove all ports USB device manager and start option to add material on the list. After detection and installation it should work again.

  • USB not recognized on Windows 7

    Hello
    I have a problem. I instaled Windows 7 USB and mouse does not (USB not recognized-pop up on my desk).
    PLS, can you help me to solve this problem?

    Hello

    What model of laptop do you have?
    On the European driver Toshiba Satellite A350 series page I could find the registry patches. I think you should install it!

    In addition you should check the support page of USB devices maybe your Win 7 peripheral USB needs drivers

  • 6218 USB NOT recognized

    Hello!

    I need help to understand (and perhaps fix ) a problem with a peripheral USB-6218.

    In some of our test engine test bed systems, we have NI USB-6218 devices of additional analog inputs.

    After a few months of normal activity, when I plug the usb 6218 in a specific computer, it is not recognized correctly, and it no longer works.

    In Max, it appears as shown in the attached picture.

    • The computer where is installed the system is a Win7 x 64.
    • Tests were conducted with drivers DAQmx 9.6.2 and 14.0.
    • Different USB cables
    • Different 6218 devices
    • Different computers with the same software installed
    • Another device, like some HD WebCams, work correctly.

    Do someone had a similar problem? All reviews are much appreciated

    Thank you very much for your help

    Davide Galli

    I almost tried everything...

    The solution was "FORMAT C:"

    With a new installation of Windows 7 64, the problem disappeared!

    Thank you very much for your help!

Maybe you are looking for