USB port problem - peripheral usb not recognized for what I plug

When any device is plugged into usb port (ipod, camera, printer, etc.). I get the message "usb device not recognize."

All the usb drivers have been updated, but I still receive the message.

Hello, just for your info. I ran the patch program, but it didn't really do anything but say I had a problem with something and I had to pay someone to watch. Someone I know told me that the last thing that I had loaded several days before the problem was probably the problem. The only thing that was new was Avast program, so I uninstalled. But this does not work, I still had the usb problem before and after I reinstalled it. Also, I discovered that I had a problem to interface with Avast and after repeatedly talking about them and trying hard and it doesn't work, they wanted me to use their special program program uninstall in safe mode and uninstall Avast. So I did, then I reinstalled it and it fixed the problem to interface with Avast. Then a few hours later, I tried to use my usb ports again, just for the * of it. And quess what, they worked. Yes in some way the avast program stopped my work usb ports, when I installed it first. Avast said he couldn't have their summer program? Well it works now anyway. Thank you, Greg

Tags: Windows

Similar Questions

  • Peripheral intermittent USB not recognized problem in loop

    Hello

    I have a Dell Precision M6500 laptop in a docking station with a USB keyboard and mouse attached running Win 7 Pro 64 bit.  Most of the time, the machine works fine without any problems, but sometimes, Windows will in this tight where loop every few seconds, it appears the dreaded ball peripheral USB not recognized - even if I have not added/changed and the USB device on the machine.  I tried to disable the device, uninstall the driver, etc, but nothing I do seems to fix the problem.

    Please help because it drives me crazy.

    Thank you

    Robert

    It turns out that Dell thinks it's a hardware problem.  Theyu replaced the docking last week and that made it better for 3 or 4 days, but now he's back.  They will replace the motherboard this week, so we'll see...

  • Peripheral shuffle not recognized-iPod USB - Vista

    Hello

    I have a laptop HP 6730 s that works perfectly since I bought it a few months ago. I recently bought an iPod shuffle 2nd generation. The device worked properly once. Neither the ipod nor any other usb device works now. There is an exception: my HP printer which is connected by USB, but has its own power supply still works.

    I get the error message "USB device not recognized", even if there is no at all connected usb devices.

    Thanks in advance for any help

    Andrew

    Andrew Russell,
    Thank you for visiting the Microsoft Answers community forum.

    We need to collect information to this issue.
    When you go into the Device Manager, the USB controller is displayed as working properly or does have a yellow exclamation mark on it?
    What is the error "USB device not recognized" appear - what happens when the mnessage appears?
    You have restarted the computer? (I know, stupid question, but some people don't do that)
    The same thing happens if the computer is running on battery or AC power?

    Here are a few things to try until we get more information from you:

    Rollup cumulative update for USB in Windows Vista Basic components
    http://support.Microsoft.com/kb/941600

    Try uninstalling the iTunes software, reboot, and then try another USB device to see if it works.  Sometimes iTunes can be damaged and cause USB problems.

    Let us know if any of these things help, and the answers to the questions, then we can also help you.
    Thank you
    Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Our HP 1150us g7 ceased to recognize our double USB 2.0 Port. It is not listed for uninstall and

    Our HP 1150us g7 ceased to recognize our double USB 2.0 Port. It is not listed for uninstall or update its "drivers. Only a single USB port works on the right side facing the laptop.

    It is only 21 days out of warranty and I am told that they can be replaced but it takes a huge amount of work, then someone told us that it can be exchanged only the motherboard together. I found the exact part for sale so I think it's replaceable.

    Here is a link to order the we think can be replaced.

    http://www.machinaelectronics.com/store/buypart.cfm?PN=NL028516

    Anyone know if it is replaceable or not?

    We get sick on this subject we have only had the phone a year and for the warranty to be missed only 21 days before his death, we are disappointed with HP for not providing assistance.

    .

    The link you provided is not the same model as yours. While it can work, I haven't checked it.

    Have you made any hardware troubleshooter on unity yet?

  • HP LaserJet P1102: USB not recognized during installation of HP LaserJet P1102

    I have a Sony Vaio VPCEH computer laptop with Windows 7 and when I run the disk I got with the printer on my laptop, that the installation procedure works in what concerns the section "Install printer Software". When you are prompted to turn on the printer and connect the cable USB to the laptop it says 'USB not recognized '.  I tried all 4 slots USB into my laptop but the USB still appears as an unknown device with an exclamation point in a yellow triangle. I searched internet solutions and tried to uninstall the unknown device in Device Manager and restart the installation with the disc, I also tried clicking on the unknown device driver software update but it says the software driver is up to date and still, it shows as an unknown device and is not recognized. I also tried to uninstall the HP software from the disc on my laptop and that reinstall but nothing has worked. I felt for over 2 weeks now and have not been able to use it because of this problem and I really need for University, so I would be very happy if someone could please give me a solution to this problem

    Hi @Janemaguire,

    Have you tried another USB cable?

    Because the printer is not detected on the Mac, it may be the USB port of the printer.

    What happened when you tried to install the printer on Mac?

    Error messages?

    What is the model Laserjet P1102w?

    Let me know. Thank you.

  • Why am I suddenly "USB not recognized, one of the devices USB has malfunctioned and Windows does not recognize"

    Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...

    I'll try not to waffle too guys, so here's...

    Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).

    But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."

    After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(

    A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
    The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
    Tried a system restore
    Tried to reinstall itunes

    When I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.

    Thank you comrades, cordially, Freddy frustrated. :)

    Another said I should go to Device Manager, uninstall all the USBs and restart.

    Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.

    I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).

    Is the charge of the iPhone when it is connected to the USB port (I don't think)?  This happened to me recently, but a reboot fixed it.  I guess that that happened to you.

    I guess that you don't see the error messages in Device Manager or you must declare them.

    You can uninstall all USB devices that do not exist as follows:

    • Open a command prompt window (start > run > cmd > OK)
    • Enter the following command and press enter

    Set devmgr_show_nonpresent_devices = 1

    • Start the Device Manager by typing the following in the same command prompt window

    devmgmt.msc

    • In Device Manager, click the view menu and select "Show hidden devices".
    • You should see a category just after "Non-Plug and Play drivers" named "other devices."  Chances are that there will be a big exclamation yellow mark beside it.  When you expand the "other devices" you should see several non identified "USB devices."  Uninstall all this.
    • Reboot (with the iPhone NOT connected).
  • USB not recognized on Windows 7

    Hello
    I have a problem. I instaled Windows 7 USB and mouse does not (USB not recognized-pop up on my desk).
    PLS, can you help me to solve this problem?

    Hello

    What model of laptop do you have?
    On the European driver Toshiba Satellite A350 series page I could find the registry patches. I think you should install it!

    In addition you should check the support page of USB devices maybe your Win 7 peripheral USB needs drivers

  • "Usb not recognized" keeps blinking and endangered

    Hello, the notebook of a colleague, she has the message "USB not recognized" that appears for a few seconds, then disappear. Sometimes it will come back repeatedly, sometimes he disappears for long periods of time. When I was reviewing its system, is come/gone several times, disappeared for a few minutes, then flashed again once again.

    She uses a laptop HP ProBook 4310 S. It uses two USB ports. One for its wireless mouse and the other to a Kensington Displaylink (allows for laptop > Displaylink > external monitor via the USB port), who worked without interruption throughout my check.

    Any thoughts?

    Hi phill.

    I suggest an update of the s chipset driver:

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3974410&prodTypeId=321957&prodSeriesId=3974409&swLang=13&TaskID=135&swEnvOID=1093

    You should check to make sure that it is your laptop model.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Device USB not recognized (malfunction)

    I went on my external hard drive and an error message came - USB not recognized - device due to a malfunction. I tried switching off all voltage and turn support but still the same voltage. Then I went to print something and the same message came. However, I used my printer today without any problem. I don't know what happened. Advice please? Thank you very much. Aide-de-camp

    Hello ~ thanks for the reply.

    Just to say that I read somewhere switch all switch off and leave it for half an hour - then turn on everthing. Miraculously - it worked!

  • Deviice USB not recognized. Help, please.

    So I have this Freecom 500 GB Portable external Hardrive and I have used it for several months now. It worked fine on my laptop and other computers, I'll until recently, when I plug it says: ' "USB device not recognized.". I click on the USB icon and it said: "one of the devices attached to this computer has malfunctioned, and Windows does not it." he has never done this before. In addition, there was a 'recommendation' which suggests I 'try to re-connect. If Windows does still not it, replace the device. " So I tried and tried (reconnection) but it's the same thing. USB NOT RECOGNIZED. I tried on the laptop of others and computers and the same thing happened. I have important documents stored on this hard drive... I don't think that the computer is at fault, rather my hardrive, but I'm not sure. What do you think? And are there ways I could solve this problem?

    Hi Elysem,

    As you have checked the hard disk on other computers and it gives the same error message that means there is a problem with the hard drive so I suggest you contact the manufacturer of the hard drive to get help.

  • I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.

    My laptop with Windows XP does not connect to the camera?  How can I reconnect these?

    I have my camera, a Kodak M1033, connected to the computer by a usb cable.  The connection is not recognized.  What I can do.

    Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk

  • FAT corrupted USB not recognized

    I have problems with my rocket GB 8. This morning, while trying to fix my flash drive I accidently deleted the partition off my rocket. Of course, now I'm reeciving 'Fat corrupted' error on my fuse and USB will not recognize. I've searched high and low. I tried to power it in 20 seconds, put the "rocket" on hold, then press on the< rewind="" button="" (and="" center="" buton)="" while="" connecting="" the="" usb="" and="" i="" still="" receive="" the="" usb="" not="" recognized="" in="" windows="" (xp,="" vista="" &="" 7).="" i="" even="" tried="" using="" my="" wife's="" laptop="" with="" vista="" with="" the="" same="" usb="">

    Please tell me I didn't have the toast when I messed up the partition! Help!

    Finally, after the persistence, I got the computer to recognize the "rocket". Managed to format to FAT32 via Windows without any problem, then via the "rocket". All is well now.

  • USB not recognized on the computer. Error code 43.

    Printer was working fine and then - after Microsoft updates have been installed - USB not recognized-Code 43

    Have you tried the new usb - port, nothing works

    Thank you

    We uninstalled the printer and then tried again the USB and it worked

  • Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

    Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected

    Hello

    Since you said it worked very well recently, I'll try to do a system restore at this point in time.

    See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1

    In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.

    See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1

  • Setting up c4795 all in one printer - usb not recognized?

    When I try to put my c4795 hp software tells me to connect the printer to the laptop via the usb port (to connect the network settings to the printer).

    When I try this, I get the message usb not recognized on my laptop and am not able to continue the installation?

    Thank you.

    Yes, it must be connected

    Start > Device Manager > and get these unknown devices or devices that has this!

Maybe you are looking for