Microsoft kinect v2 - peripheral USB not recognized
I bought a kinect v2
When it is connected to "the USB device that you connected to this computer has malfunctioned...". »
the Kinect v2 configuration auditor gave me this warning for the USB3 port:
"USB 3.0 support port detected with unknown bandwidth. Kinect may or may not be compatible with your hardware.
the kinect is the microsoft version, not the version of the xbox.
solved! must use the cable out of the box
Tags: Windows
Similar Questions
-
Error HP Deskjet F2280 peripheral USB not recognized.
Original title: How can I get my printer recognized. When I turn my printer I get the error notice following (USB device not recognized). I'm working on Windows XP.
It was working fine until last week when he suddenly showed the error notice. It's a HP Deskjet F2280. I've uninstalled and reinstalled it but no luck.
Hello
Is the issue limited to this device only or you get the message with other USB devices as well?
Method 1: Remove and reinstall all USB controllers
To remove and reinstall all USB controllers, follow the steps mentioned below:
a. click Startand click run, type devmgmt.msc in the Open box, and then press ENTER.
b. expand Bus USB controllers.
c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
d. restart the computer.
e. plug the removable USB storage device and then check if the problem is resolved.
Method 2: Install the latest drivers
Download the latest version of the driver from the below website and install it:
Method 3: Update the drivers for the chipset of the motherboard
See the following site:
How to manage devices in Windows XP
-
Driver webcam, peripheral USB not recognized?
I have the MSI WIND U135. I use Windows XP and everytime I turn on my webcam, it comes up with the bubble yellow saying: USB device not recognized. In Device Manager, I usually have a scanner and camera tab, but I have now. I don't know what to do. Thanks in advance for the help.
Hello Megan, you can resolve this problem by updating the drivers...
Download each of these files and right-click on it and click on extract all. Then go to the folder and run the Setup file and follow the instructions.Each of them, install in the order that they are listed below.- Intel 5 Series Chipset cs_intel5series_9.1.1.1027_al00.zip
- Simple Face easyface_nb_all_11036.zip
- Simple camera app: webcamtool_vr630_xp32_nb.zip
After installation, restart your PC, and it should work.If it does not, then there is a hardware failure in an integrated device. If it is under warranty, you can get it checked by the manufacturer. -
Wireless G USB adapt WUSB54GC - peripheral USB not recognized
I'm guessing that it's version 1, because it is not any version number, written on the back...
in any case, the adapter is used since December 2008 and had no problems before...
it suddenly stopped working and gives the 'USB device' ball not recognized on a Vista laptop...
I tried on another laptop and the result is the same, I tried to reinstall the drivers from the CD and that I got on the linksys website, it still does not work...
the unit ran his life already?
As the card is not getting detected and you have tried it on two different machines, it seems that the device is defective.
-
How difficult peripheral USB not recognized without restarting
Hello
Sometimes, when I re plug a USB 2 or 3 times, appear a notification message (unrecognized USB device...) and I have to restart my computer to make it work again.I want to know how to fix this problem without having to restart my computer and I don't want the solution when I uninstall all devices in Device Manager, because other usb devices can be connected and working at the same time, I can perhaps just to restart a service or kill a process...?Hello
-Did you do any changes made on the computewr before this problem?Method 1: I suggest you to run the troubleshooter in the below mentioned link and check.Open the hardware and devices TroubleshooterMethod 2: I suggest update you also the chipset and other drivers from the website manufactuerr and check.Updated a hardware driver that is not working properlyhttp://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyFor reference:Tips for solving problems with USB (Applicable for Windows 7) devicesHope this information helps. -
USB port problem - peripheral usb not recognized for what I plug
When any device is plugged into usb port (ipod, camera, printer, etc.). I get the message "usb device not recognize."
All the usb drivers have been updated, but I still receive the message.
Hello, just for your info. I ran the patch program, but it didn't really do anything but say I had a problem with something and I had to pay someone to watch. Someone I know told me that the last thing that I had loaded several days before the problem was probably the problem. The only thing that was new was Avast program, so I uninstalled. But this does not work, I still had the usb problem before and after I reinstalled it. Also, I discovered that I had a problem to interface with Avast and after repeatedly talking about them and trying hard and it doesn't work, they wanted me to use their special program program uninstall in safe mode and uninstall Avast. So I did, then I reinstalled it and it fixed the problem to interface with Avast. Then a few hours later, I tried to use my usb ports again, just for the * of it. And quess what, they worked. Yes in some way the avast program stopped my work usb ports, when I installed it first. Avast said he couldn't have their summer program? Well it works now anyway. Thank you, Greg
-
Peripheral USB not recognized then try to install a new printer
can help me to answer why the message by message "unrecognized USB device" displays when I try to connect a usb cable, when I was trying installs a new printer?
Hello
Usually extended as printer USB devices should be delivered with an installation CD or drivers. You should check if you have this CD, and then install the necessary software.
In addition, you can also disable the safe option of feeding in the USB root hub properties. -
Peripheral intermittent USB not recognized problem in loop
Hello
I have a Dell Precision M6500 laptop in a docking station with a USB keyboard and mouse attached running Win 7 Pro 64 bit. Most of the time, the machine works fine without any problems, but sometimes, Windows will in this tight where loop every few seconds, it appears the dreaded ball peripheral USB not recognized - even if I have not added/changed and the USB device on the machine. I tried to disable the device, uninstall the driver, etc, but nothing I do seems to fix the problem.
Please help because it drives me crazy.
Thank you
Robert
It turns out that Dell thinks it's a hardware problem. Theyu replaced the docking last week and that made it better for 3 or 4 days, but now he's back. They will replace the motherboard this week, so we'll see...
-
USB not recognized on Windows 7
Hello
I have a problem. I instaled Windows 7 USB and mouse does not (USB not recognized-pop up on my desk).
PLS, can you help me to solve this problem?Hello
What model of laptop do you have?
On the European driver Toshiba Satellite A350 series page I could find the registry patches. I think you should install it!In addition you should check the support page of USB devices maybe your Win 7 peripheral USB needs drivers
-
"Usb not recognized" keeps blinking and endangered
Hello, the notebook of a colleague, she has the message "USB not recognized" that appears for a few seconds, then disappear. Sometimes it will come back repeatedly, sometimes he disappears for long periods of time. When I was reviewing its system, is come/gone several times, disappeared for a few minutes, then flashed again once again.
She uses a laptop HP ProBook 4310 S. It uses two USB ports. One for its wireless mouse and the other to a Kensington Displaylink (allows for laptop > Displaylink > external monitor via the USB port), who worked without interruption throughout my check.
Any thoughts?
Hi phill.
I suggest an update of the s chipset driver:
You should check to make sure that it is your laptop model.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
popping up the message usb not recognized. It occurs when the network was slow and tried to disconnect internet directly unplug and plug the usb between mobile phone and pc. then it does not go away even system restore has been made. In addition, the bluetooth does not work. When I stopped PC properly but it will restart. at the same time when I start it up, but it does not occur. I closed again and then start again and works. However, it appears the message usb not recognized frequently.
To start with, try running the Fixit USB, here http://support.microsoft.com/gp/hardware_device_problems
-
USB not recognized on the computer. Error code 43.
Printer was working fine and then - after Microsoft updates have been installed - USB not recognized-Code 43
Have you tried the new usb - port, nothing works
Thank you
We uninstalled the printer and then tried again the USB and it worked
-
HP LaserJet P1102: USB not recognized during installation of HP LaserJet P1102
I have a Sony Vaio VPCEH computer laptop with Windows 7 and when I run the disk I got with the printer on my laptop, that the installation procedure works in what concerns the section "Install printer Software". When you are prompted to turn on the printer and connect the cable USB to the laptop it says 'USB not recognized '. I tried all 4 slots USB into my laptop but the USB still appears as an unknown device with an exclamation point in a yellow triangle. I searched internet solutions and tried to uninstall the unknown device in Device Manager and restart the installation with the disc, I also tried clicking on the unknown device driver software update but it says the software driver is up to date and still, it shows as an unknown device and is not recognized. I also tried to uninstall the HP software from the disc on my laptop and that reinstall but nothing has worked. I felt for over 2 weeks now and have not been able to use it because of this problem and I really need for University, so I would be very happy if someone could please give me a solution to this problem
Hi @Janemaguire,
Have you tried another USB cable?
Because the printer is not detected on the Mac, it may be the USB port of the printer.
What happened when you tried to install the printer on Mac?
Error messages?
What is the model Laserjet P1102w?
Let me know. Thank you.
-
Hi all. If anyone out there in Cyber Land can solve this problem for me so I've personally you will issue an eight-pack of ice-cold beer (or a bottle of wine for the ladies lol)...
I'll try not to waffle too guys, so here's...
Right my PC running Windows XP. I also have itunes installed on my PC (I have an iphone 4). Upward until yesterday my iphone and itunes were working well, (once I plugged my iphone in the itunes USB port recognised that my iphone was plugged and synchronization was fine etc.).
But now when I plug my iphone to PC to sync with itunes, I get a pop up box on the lower right part of the screen that reads... "USB not recognized one of the USB devices has malfunctioned, and Windows does not recognize."
After visiting about 5 different sites now "Ways to solve this problem", believe it or not, I still have the problem bloody! :(
A site proposed shutdown PC and unplug it from the power supply, then plug it back start-up and back... this as did not work!
The other they say that I should go to Device Manager, uninstall all the USBs then restart... it did not work either.
Tried a system restore
Tried to reinstall itunesWhen I check the names USB in Device Manager, there is one who reads unknown device. I am literally pulling what's left of my hair now. I tried to solve this problem for almost 2 days now and still no joy. That's why no matter what input you guys would be very appreciated. I'm no PC Wizard, so please, don't think you're patronizing me if you break down things step by step for me.
Thank you comrades, cordially, Freddy frustrated. :)
Another said I should go to Device Manager, uninstall all the USBs and restart.
Usually, this works... but can be very dangerous, unless you have a PS/2 keyboard.
I also assume that you have tried all other USB ports on the computer. tried a verified USB device (for example, a flash drive) in the USB usually when you plug in your iPhone. and I tried your iPhone in another computer (I know it's rare for an error message Windows really means what he says, but sometimes the material lacks).
Is the charge of the iPhone when it is connected to the USB port (I don't think)? This happened to me recently, but a reboot fixed it. I guess that that happened to you.
I guess that you don't see the error messages in Device Manager or you must declare them.
You can uninstall all USB devices that do not exist as follows:
- Open a command prompt window (start > run > cmd > OK)
- Enter the following command and press enter
Set devmgr_show_nonpresent_devices = 1
- Start the Device Manager by typing the following in the same command prompt window
devmgmt.msc
- In Device Manager, click the view menu and select "Show hidden devices".
- You should see a category just after "Non-Plug and Play drivers" named "other devices." Chances are that there will be a big exclamation yellow mark beside it. When you expand the "other devices" you should see several non identified "USB devices." Uninstall all this.
- Reboot (with the iPhone NOT connected).
-
Device USB not recognized (malfunction)
I went on my external hard drive and an error message came - USB not recognized - device due to a malfunction. I tried switching off all voltage and turn support but still the same voltage. Then I went to print something and the same message came. However, I used my printer today without any problem. I don't know what happened. Advice please? Thank you very much. Aide-de-camp
Hello ~ thanks for the reply.
Just to say that I read somewhere switch all switch off and leave it for half an hour - then turn on everthing. Miraculously - it worked!
Maybe you are looking for
-
Implementation of a STOR. In a household of Mac E wireless adapter
My adapter arrived yesterday, and so far I've managed to create the network and set a WPA2 password; and our devices (2006, MacBook Pro, MacBook Pro to work - I'm guessing about 2011?; 2014 iMac, iPad 2, iPad 4, Air iPad, iPhone 3GS, iPhone 6 seem to
-
Can I create partitions using facilities on A25-S207 DVD?
It is available on Satellite A25-S207 installation DVD to create partitions. It came with a single DVD with everything (WinXPhome, drivers, etc.). I have 120 GB of HDD, and I want 2 * 60GB partitions. Kind regardsJ. Alberto
-
Photosmart more B210: Photosmart B210 wants to install cartridges even if she
Hello After a Reset my of Photosmart Plus B210 wants to install cartridges. As I didn't have the original ones, I tried with cartridges of the same type that was a friend of another printer. Unfortunately, even after repeatedly turn on, off and clean
-
X 360 spectrum: spectrum x 360 HP Touchpad
After upgrade to Windows 10, when using the trackpad, if I press a key on the keyboard it will cause the trackpad to be turned off for a while. I tried turn off SmartSense in Synaptics ClickPad properties and tried to adjust the windows for Mouse & t
-
Someone please lead me to a tutorial for backing up my Windows files?
Hello My laptop and desktop want me to back up my files of Windows. I was getting nowhere fast. Between trying to correctly format the discs that I wanted to use and the backup process rejecting, I finally gave up. What should do? I have Windows 7 on