Found a processor for a1510n - want to make sure that it is compatible
As the title goes, I found a 2.2 gHz dual-core, for my HP a1510n. I discovered after looking through the previous discussions on this forum, that I needed a socket 939 processor. The processor seems to be compatible. I am mistaken, or have I missed something else?
Thanks in advance,
AP
I was going to suggest eBay, these stores you were watching ask as much as an AMD Phenom II X 4! What a pity that some of the larger internet retailers have no more. I see that tigerdirect.com has very attractive prices on the 5200 + and 6000 +, but they do not have more than 4200 +, or not newegg.com.
You are not in the United States because the seller for one on eBay that you linked to is located in Korea, otherwise, it will be fine. If you are in the U.S., then it seems pretty good (fresh cheaper port for free). It is still cheaper and comes with the radiator fan, but he's not a buy it now auction. There are heatink fans there, too.
Tags: HP Desktops
Similar Questions
-
Hello, just want to make sure that my membership has been renewed. Thank you.
Hello, just want to make sure that my membership has been renewed. Thank you.
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===>===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link belowCreative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.htmlor
Your subscription to cloud appears on your account page?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
-
My computer is fried. I want to make sure that I can install the Creative Suite 3 on the new computer I buy. I plan to get the same computer as before, a Mac 10.4.11 Tower installed on it.
Thank you!
If same os, not a problem. (though you might need an activation count reset if you will exceed your two activations.)
If you need installation files
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- Premiere Elements: 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 12 | 11, 10 | 9,8,7
- Lightroom: 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
window using the Lightroom 3 link to see these "important Instructions".
-
I get a new iMac and I have all my info my CS5 license. We use the Migration Assistant to transfer via, and I also have a Time Machine backup of my existing iMac. My question is, what do I have to uninstall on my old machine and reinstall on the new licensing, etc. to walk... or Migration assistant will be fine transfer on? I want to just make sure that I have no problem with my CS5 on the new machine.
Migration undoubtedly will cause, at least, some significant problems.
If you do not plan to use cs5 on your old computer, you need to open one of the programs and click Help > deactivate.
then install cs5 using your installation files and activate using your serial number. do not use time machine or assistant migration to move your adobe programs.
-
TRUNC (date) want to make sure that I didn't miss something here!
My query is due to go live to production, where it will run on all SUNDAYS in BI software to pick up the report based on the latest data of a week (Sunday last to last Saturday). For example, the query executed on September 29, 2013 "go get the report based on data from September 22, 2013 00:00:00 ' until September 28, 2013 23:59:59 '.
I replaced the date code of irreversibly with the following text:
-to test on my terminal: closed_date > = to_date('09/22/2013','MM/DD/YYYY') AND closed_date < (to_date (' 09/28/2013 ',' MM/DD/YYYY') + '1'-DAY interval)
-replaced by the EC on production: closed_date > = closed_date TRUNC(sysdate-7) AND < (TRUNC(sysdate-1) + '1'-DAY interval)
I want to just make sure I missed not anything here!
Hello
What you have posted will get data from the last 7 days, not including today, so if we do run on Sunday, September 29, it will get the data from the previous Sunday (22 September) through yesterday (28 September) inclusive.
What happens if you need to run late? For example, if the system is shut down on Sunday, and you need the report Monday? If you run this query on Monday, September 30, it will include data from Monday, September 23 and Sunday, September 29. You may not care about this possibility, or it is maybe exactly what you want, but if you want something that is committed to get the week Sunday - through-Saturday last, use
WHERE closed_date > = TRUNC (SYSDATE + 1, 'IW') - 8
AND closed_date< trunc="" (sysdate="" +="" 1,="" 'iw')="" -=""> >
It's including Sunday, Sept. 22 to Saturday September 28 when its run anytime during the week of Sunday, September 29 Saturday, October 5.
It's not you NLS parameters.
-
I bought a new PC and re-uploaded the plan of photography after signed in Adobe CC with my credentials. Sometimes I get a notification on a trial version of Adobe Bridge and I wanted to make sure that I downloaded Lightroom and Ps for my plan, trial versions not. I just down loaded terms of photography twice, once on my first computer and a second time on this computer. Please advise and thanks in advance.
[Duplicate message deleted... post the same question more than once is confusing... MOD]
[This is an open forum, not a direct line to Adobe support... you have to wait a response]
Hello
For the trial;
First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.
https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
-
People,
I am trying to load and run the PowerShell script of PowerCLI Module to check the CPU, memory and storage overcommitment. VMware PowerCLI Blog - VMware Blogs but somehow it is always stopped with the error: cannot find the [ordered] type: make sure that the assembly containing this type is loaded.
Here are some of the diagnostic result:
$PSVersionTable
Value name
---- -----
PSVersion 2.0
PSCompatibleVersions {1.0, 2.0}
BuildVersion 6.1.7601.17514
PSRemotingProtocolVersion 2.1
WSManStackVersion 2.0
CLRVersion 4.0.30319.1026
SerializationVersion 1.1.0.1
Get-ChildItem ' HKLM:\SOFTWARE\Microsoft\NET frame Setup\NDP'-recurse |
Get-ItemProperty-name of the EA - 0 Version |
Where {$_.} PSChildName-match ' ^ (?) (S) \p {L} "} |"
Select PSChildName, Version
PSChildName Version
----------- -------
v2.0.50727 2.0.50727.5420
3.0.30729.5420 v3.0
Windows Communication Foundation 3.0.4506.5420
Windows Presentation Foundation 3.0.6920.5011
3.5.30729.5420 v3.5
Customer 4.0.30319
4.0.30319 full
Get-PowerCLIVersion
PowerCLI Version
----------------
VMware vSphere PowerCLI 5.8 Release 1 build 2057893
---------------
Versions of the snap
---------------
Build VMWare AutoDeploy PowerCLI component 5.5 1983942
Build VMWare ImageBuilder PowerCLI component 5.5 1983942
Build license of VMware PowerCLI component 5.5 1265954
Build VMware Storage PowerCLI component 5.8 2057894
Build VDS's VMware PowerCLI component 5.8 2031581
Build VMware vSphere PowerCLI component 5.8 2031581
I installed Windows6. 1 -KB2819745- x 64 - MultiPkg.msu to enable Powershell v4.0 on my Windows 7 laptop, but still the script cannot be executed with the above error message.
Any kind of aid and assistance would be greatly appreciated.
Thank you
Hello-
Ah, yes--it is that review.
Another option, because you are not able to go to .NET FX 4.5, is to remove the parts "[ordered]' of the code that you use. This type Accelerator makes the hash table a dictionary sorted. The effect to remove that from the code will be that the properties of the object that results will not be in the order in which they appear in the code.
And, another option would be to install PowerShell v3 (the version in which the '[ordered]' feature has been added'). That shouldn't require a FX .NET newer than what you showed as having already installed on this computer. However, as we have seen with the PSSnapin and PSv4 Exchange, you want to make sure that the PSSnapins / Modules you want to use are compatible with PowerShell v3.
-
I'm about to buy Resident Evil 5, the PC version and I want to make sure it will work on Windows 7.
Worked for me on Windows 7 64 bit Home Premium edition. Enjoy. This is a pretty decent game that I guess.
-
Make sure that 'tour windows xp' appear again for a specific user
When I create a new account, a little balloon appears in the bottom right of the screen next to the notification area that says 'Windows XP Tour'. After awhile, she disappears.
Is it possible to bring it back and make it stay there all the time? How could I do? There must be a registry setting that keeps track of the amount of time since an account was created or how many connections, so how can I change it to always do this prompt? Can I use an editor hex old-fashioned thus.
I have an old relative who keeps forgetting basic skills such as how to reduce a window, the use of the taskbar and sometimes forget that the large list of programs are now under 'all programs' (although I solved it using the start menu classic.) I don't know what I'll do when she gets a new machine with Windows 8, since this feature has been removed in 7). I'm tired of always prompting you to go to start-> all programs-> Accessories-> windows XP of the Tower, and I tried to add an icon on the desktop. I want just the reminder it so she can click it before calling me for really basic things I taught him a dozen years with his Windows 98 computer. This seems to happen more frequently, and I noticed that she is 'slide' into other things as well, so I'll try to make up for it.
P.S. I'm not sure which category I should be put under. I settled on "ease of access" because I try to help and an elderly woman in her late 90s access her computer when she keeps forgetting the basic skills. The tour is... temporarily.
Hi SlickRBCD,
If I understand correctly you have a problem with guided tour of Windows XP still appearing on specific users. Do not worry, I'm here to help you with this question.
Let us try the following steps and check if it works for you.
- Start the registry (Regedit.exe) editor.
- Locate and click the following key in the registry:HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Tour
- On the Edit menu, point to new, click Dword value, type RunCount, set the data value 1 (one) and then click OK.
- Exit the registry editor.
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756
Please answer if the steps do not have hepl, so that we could help you better.
-
IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?
Hi JRCLNSIN100,
Welcome to Microsoft Answers Forums.
We would like to get some more information from you to help solve your problem. You better, please answer the following questions.
· What is the disk you use to reinstall?
· Is this a recovery or reinstalling the disc you are using?
· When exactly do you get this error message?
· What is the edition of Windows Vista, you try to install?
· How old is the drive that you are using?
· How are you starting the installation process?
After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.
First check if you have scratches or dust on the disc and clean the surface and try again.
To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.
To perform a flat installation of Windows Vista, follow these steps.
Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:
http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx
- Insert the Windows Vista installation disc.
- Start Windows Explorer.
- In Windows Explorer, click to select the drive for the Windows Vista installation disc.
- On the Edit menu, click select all.
- On the Edit menu, click copy.
- Click to select the hard disk you want to contain the flat installation files.
- On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
- Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
- Double-click Setup.exe, and then follow the instructions that appear.
See the link below for more information on flat installation.
How to perform a flat installation of Windows Vista
http://support.Microsoft.com/kb/928902
This problem can also occur if the firmware of the DVD drive is defective or obsolete.
If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.
For more information please visit the link below.
Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".
http://support.Microsoft.com/kb/930984
Hope this information is useful.
Let me know if it worked.
All the best!
Thanks and greetings
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I do, however, I want to make sure it is stopped.
Good, lately my PC slowed down due to some strong enough process, I put it through, and I was wondering if doing what that link says to do is good at making and will not damage to my PC somehow.
http://www.WikiHow.com/clear-Windows-7-cache
Thank you...
Hello
Yes, those who are very good although they cannot help, ok to give them a try.
==============================
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">->
http://support.Microsoft.com/kb/2681286#method22Performance and Maintenance<- check="" these="" especially="" the="">->
http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1Other methods of troubleshooting to use according to your needs:
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1Optimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceOpen the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterTo see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at Applications.
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
Many excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded: run DriverView - set
SEE drivers to hide Microsoft - update those without drain in their names. (Also
updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Hello. Editor of newbie here. If I split a video file into two clips in Premiere Pro and you want then save each one as a different file while exporting to the encoder, how to make sure that they are registered in the form of two different files with different after encoding names?
Located in and out on a section and that export brands.
.. .Rinse and repeat for the other section.
Name each section and where it is exported to separately... and as you wish
-
I wanted to just make sure that my plan was cancelled.
I wanted to just make sure that my plan was cancelled. My confirmation for my case number is: 0217263114
Hi Lisa,
Unfortunately the subscription has not yet been canceled.
Please contact support by calling/chat for cancellation requests and billing queries:
* Be sure to stay connected with your Adobe ID before accessing the link above *.
You can also check the help below document:
https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Please go through the Adobe - General conditions of subscription as well.
-
I want to disable iCloud and make sure that
I want to disable iCloud and make sure that I can download all my photos, contacts, and calendars before he goes.
I saw several "methods", and they differ greatly.
How can I do this?
Simply disconnect from iCloud.
Everything that you have been synchronized with iCloud is already present on your Mac. The only exception is if you have been optimize Photos. Then the cloud includes files and your Mac has smaller files.
-
I get the following error:
error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.
I've included windows.h
which includes winbase.h
Winbase.h contains the prototype for the function in the above error message.
If I disable 'Require the function prototypes' and 'Building with the C99 extensions', I get the following error:
error: Undefined symbol "_GetActiveProcessorCount" referenced in "c:\Users\Public\Documents\National Instruments\CVI\HDLC\cvibuild. HDLC_RandD\Debug\HDLC_RandD.obj ".
I work in the ICB 2013 SP2.
Why I get this error.
This function is only valid in Windows 7 and later versions. Because the ICB 2013 still supports Windows XP, this feature is excluded by default from Windows headers that are provided with CVI. If you do not need to worry about the versions of Windows prior to Windows 7, however, you can include it yourself, by adding the following macro in the dialog box options generation CVI (be sure to include for all configurations):
Maybe you are looking for
-
I opened emails with many images. New version is having a problem opening a tab with images more than maybe 6 or 7. Of older versions sometimes had the same problem, but the images unopened is appeared on the page as a small box empty you can try to
-
Is it possible to change the VGA of a Satellite A200?
Is it possible to change or upgrade the graphics card/chip by the Satellite A200?
-
Hello I bought credits for Skype to Go making international calls to the United Kingdom and it keeps wanting to send my PIN CODE to my CELL PHONE which I did, just a FIXED phone. I was under the impression that we could USE SKYPE TO MOBILE and NOT a
-
be hpe530: can't access bios
After updating the firmware to 7.15 the system restarts fineThe second time was select the boot device to obtain hollow the boot processThe third time I changed the boot order in the bios and from that moment, I was unable to do somethingI disconnect
-
I am trying to connect to a database access (office 365). I downloaded the tool SQL (trial version) and want to connect to a simple database that I created on my C drive. I have problems with the connection string. Examples of the CVI are very poo