FPGA app shutdown problem

Similar Questions

• NB200z shutdown problems

  I am running XP service pack 3 with the NB200-z. This anomaly is intermittent, so it happens _most_ of the time, but not always (it does not seem to the use of a particular program in an obvious way).

  During the shutdown to the bottom/hibernation or switch mode Eve anyway (closing the lid, pressing the power button / stop or start menu) it will close Explorer and all running programs and make it appear a window saying "prepare to stop" (or never, what state he's going in) and it just stays there. The mouse moves, so it did not freeze completely. By pressing ctrl, alt, del fails to bring up the Task Manager, so I don't see what is going on. At this point, my only option seems to be down the power button until the machine turns off.

  Sometimes it will go beyond this point and the window disappears but it crashes and then completely on a blue background Uni where the same mouse cursor will not move. At this stage even once, I have to hold the power button until it turns off.

  There are times where it will happen normally tap down and all the other computer functions seem to work very well?

  I have looked around online to see if anyone else has this problem too, but have found no solution. Microsoft offers online that I disable the drivers one by one and keep close to see if it is a driver but I know it is damaging my HARD drive every time I turn off manually so I do not know what to do. I stopped him fine mode safe but it sometimes will vanish so fine...

  I thought it's maybe someone knows of a recorder of closure that I can use to debug with? If I had a newspaper what file it broke so I could replace or remove the file?

  Thanks a lot for your help :)

  Rob

  Usually bad drivers or badly written apps cause a shutdown problem.

  You have installed all the drivers recently? For example, a USB device or a printer?

  What AntiVirus you have installed?

• El Capitan and App Store problems

  El Capitan: App Store poster update available (for example the most recent iTunes update). It seems to be but then disappears from the two lists 'available' and 'installed '. This has happened too with a security update. Any ideas gratefully received!

  While holding down the option/alt key, click the  menu and select system information. When the report appears to look in the software section for the facilities. Updates show there? If so, can you control - click on the update and get an option Hide?

  Update App Store problems See Linc Davis response.

• Satellite L850-E8S - shutdown problems

  Hello everyone

  I bought Toshiba Satellite L850-E8S with Windows 8.0 (for a single language) preinstalled in October 2013. At the moment I can't get stop normally.

  Question: * pressing Shutdown (stop) of charms goes up "Windows is shutting down" and after that the screen turns off but power light is lit and the fan keeps operate.* I stop it by pressing the power button, I really want to quit smoking. (Once I didn't notice that and put the laptop in a bag for a few hours and it of a miracle that no equipment would have been burnt, despite the laptop was hot like the Sun) * the problem started after a month of use, and I didn't think her yet.*

  First of all, I thought that the case concerns him * hybrid Shutdown in the Win8. I have visited many forums dedicated for hybrid stop, proven fruitless discussions. *! AND! I had the same problem on my laptop with a slight difference - loading Win7 and Linux * the monitor stays on (with the lights and the fan on either). *
  Moreover, I also saw a BSOD after a day I bought the laptop. This problem concerned Realtek Audio driver and SRS Premium sound. As I understood the question is drivers conflict. Right now I have no installed Audio SRS premium and see no BSOD, but Realtek audio driver is not stable: the sound either begins to work in a few minutes after starting windows or it does'nt work at all.

  First of all, I wish really that someone to help me with the shutdown problem. All tips are welcome.

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm, change the settings described and try to turn off your computer is turned on on a regular basis.

  It works for you?

• SMax4PNP shutdown problem and sgtray.exe

  When I stop, I'm notified SMax4PNP and sgtray.exe will not end.

  How can I fix it?

  Hello

  · What is the exact error that you receive the correct error code?

  · What is the number and the model of the computer?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Try the steps listed in the link below and check if it will help: Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

• SHUTDOWN PROBLEMS

  MY COMPUTER WILL SOMETIMES HAVE AGES TO STOP AND SOMETIMES USED SHUTDOWN AND I HAVE TO SPEND TENSION.

  ANY HELP?

  CONCERNING

  Ian

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you to disconnect the external as printer, scanner etc. that are attached to the system and check that the matter persist.

  I suggest do you a clean boot and check if you are able to download the system correctly close or not.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  I suggest you follow the steps mentioned in the articles below and let us know if the problem is resolved.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Hi, 2nd try on the Coll CS6 Master not downloaded (at the location previous app) no problem, but when I opened a

  Hi, 2nd try on the Coll CS6 Master not downloaded (instead of pref app) no problem, but when I opened a n appl I get "your trial has expired. What should I do?

  There is nothing you can do. You misunderstand how it works. The tests only run once and that's it. Once you have exhausted your 30 days, there is no way to run a trial a second time on the same machine. You will need to buy the software if you want to continue using it.

  Mylenium

• Remote control/software Apple TV with the App Store problems

  Seems ridiculous that a Sept 2016 4th Gen apple TV purchase has the same problems of connectivity with the App store. Impossible to connect, or even choose App store, or spare parts offline, erratic, glitch and acts as a problem of distance, but seems to be a software problem or interface. Obvious corrections or ideas to stabilize or least to increase connectivity to app store with 4th Gen Apple TV/remote control?

  No problem of connectivity with a 4th getting Apple TV remote here... Sorry, you encounter this problem with it.

  See if there is something that will help that you haven't tried in this article to support > set up the Apple TV Remote - Apple supported application

• connection app store problem

  Hello. We are in Iran and we cannot connect to the app store on our idevices. What should we do to solve the problem.please my question answer.

  Best regards!

  What exactly is your problem? I guess mine is the same

• app photo problem!

  transfer photos from ipad to mac. everything is good. photos in the photo library. Once I have transferred the library on a drive external hard, in case of an attempt to open it, gives me the following message is displayed. "the library could not be opened. pictures has tried to fix the 'photos' library but is unable to open it. "Open another or quit smoking. external hard drive is a seagate desktop drive backup. the format is windows ntfs. I know it must be journaled anything mac. but before the new photo app it worked well with the old iPhoto, able to transfer it to the outside and to see all my photos. What could be the problem now? Thank you

  external hard drive is a seagate desktop drive backup. the format is windows ntfs.

  No - you don't have a problem with Photos - you have a problem of format hard drive - library pictures are used on a drive as Mac OS extended (journaled) dierectly linked to a fast wired connection and not used as a Time Machine backup volume

  LN

• App Store problems not search results or slow download

  Since the update to 9.3.3 iOS App Store (East coast of United States for me) gave me a lot of problems and errors with the search for updates and installation of applications. App detail pages also not load. What a coincidence, the update iOS or something else? -I can't even this post to the correct community (grayed out).

  Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

• Shutdown problem

  Hello

  I have a MacBook Pro that won't stop when I click on Shut Down, instead, it again shows the desktop (meaning nothing happens when I click on stop when the small grey window appears) but this time without the menus {(il disparaît).} I can even open any application that I want as the dock do not disappear and when I do, the menu bar reappear again, but when I close the application, the menu bar disappears again. I started having this problem right after the new update for 10.11.5.

  More information

  * My app take a little longer to open safari especially when my operating system just starts (I give my os about 2 min to start completely to the top)

  * MacBook Pro (13-inch, mid-2012)

  * To turn off now, I need to press the power button

  PLEASE CAN YOU HELP ME

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• Is anyone know App Store problems?

  I have a relatively new MacBook Pro (2015) with the latest version of OS x. recently, every time I try to make an App Store or purchase existing update I am blocked by the following error message - we could not complete your purchase product distribution file cannot be verified, it may be damaged or is not signed. I tried to go into safe mode and making the purchase - same thing happens. I tried to use the Console to search for the folder where the error occurs

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite Pro R50 - B Series 10 Windows shutdown problems

  Hi out there!

  I wanted to just inform you on an enoying but reproducible BUG:

  Toshiba Satellite Pro R50 - B series:

  You must disable the Intel Management Interface in the Device Manager in the contrary case, the computer laptop didn't shutdown completely / Standbymode will not work.

  Question (Bios V1.4 - Intel ME 11.00.1166):

  Work more than 30 min. then try closing. Screen goes blank - but the LED on the stay before the fan stays on until the battery is completely discharged. Or try to go to sleep mode. Even the stop.

  Just disable Intel ME Manager of year Windows devices you fine.

  Waiting to hear from Toshiba - I m a reseller, so the same problem exists on > 10 notebooks here.

  Best regards, Bernhard

  Hi, I have exactly the same problem with my Satellite Pro R50 and Windows 10.
  Just installed the updated Toshiba Win10 drivers, but not a solution.
  Help, please!
  Best regards, Oliver

  EDIT: SOLUTION

  https://Forum.Toshiba.EU/showthread.php?81944

• HP first app - a problem of circle geometry

  Here's a problem for a graphical solution for (using the Geometery application):

  Given a unit circle, finding another circle that is framed by the axii unit circle and x and y.

  I tried to use the features in the application, but either I could not find the means to compel the circle (as with the two tangents and circle) or through indirect and mistakes means (on the resolution of the crossroads, etc.).  I thought I had it almost with the following definitions is entered in the symbolic view:

  

  I actually had to cheat and understand I and J with Algebra first here then place exactly (since I can't force things as I want)

  However, when I draw it, the GK circle is not visible! (?), as shown below

  

  The new circle must have been touching points H, I and J.

  I also tried to generate a horizontal line at point I using plotfunc (computer (GI)) and trying to intersect with x = line is but the calculator gave a bunc of errors.

  I found the Geo. App. a bit tempramental.  It seems that many times I have to find just the right way to get things to work (if that is the case).  Usually by then it would have been quicker to do it by hand on graph paper.

  Anyway, why no smaller circle of the solution and how could I have do more easily in the application?

  It worked, thanks!

  I guess it was confused (which I don't think it should have been) on the double intersection of the line and the circle.

  I of course didn't know this third option with inter () - this isn't in the help!