framerate would increase to 10 after 15 minutes of gameplay. After about 6 months of ownership of pc

Similar Questions

• 503 errors after about 3 months w / CF10

  Server is not responding at all two days now. The record that they are running. Restarting temporarily solves.

  My first thought was that he was a customer variables problem, 90 days purge people causes a lot of problems. But I have confirmed that the source code does not reference "ClientComm". I moved variable storage of customer in a database anyway (nothing is getting filled,) and disabled the global updates. It always crashes after doing this.

  There is not a lot in newspapers (there is no hs*.log file and no exceptions in the regular CF logs), and so far Fusion reactor stressed not smoking guns. The only thing I can find is in the isapi_redirect.log file (ColdFusion10/config/wsconfig/1 /):

  [18:44:05.215 Wed Jul 23 2014] [13144:10964] [info] ajp_process_callback::jk_ajp_common.c (2066): current number of reuse is 118 connection re-use max 250 and total number of endpoint 500

  [18:44:05.217 Wed Jul 23 2014] [13144:6856] [info] ajp_process_callback::jk_ajp_common.c (2066): current number of reuse is 119 connection re-use max 250 and total number of endpoint 500

  [19:48:52.294 Wed Jul 23 2014] [13144:6344] [info] jk_open_socket::jk_connect.c (626): connect to 127.0.0.1:8012 failed (errno = 61)

  [19:48:52.295 Wed Jul 23 2014] [13144:6344] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1047): failed to open socket (127.0.0.1:8012) (errno = 61)

  [19:48:52.299 Wed Jul 23 2014] [13144:6344] [error] ajp_send_request::jk_ajp_common.c (1669): failed to connect to the back-end (cfusion). Tomcat is probably not started or is listening on the port incorrect (errno = 61)

  [19:48:52.301 Wed Jul 23 2014] [13144:6344] [info] ajp_service::jk_ajp_common.c (2692): request to send (cfusion) Tomcat failed (recoverable), due to the error when sending the request (try = 1)

  [19:48:53.402 Wed Jul 23 2014] [13144:6344] [info] jk_open_socket::jk_connect.c (626): connect to 127.0.0.1:8012 failed (errno = 61)

  [19:48:53.406 Wed Jul 23 2014] [13144:6344] [info] ajp_connect_to_endpoint::jk_ajp_common.c (1047): failed to open socket (127.0.0.1:8012) (errno = 61)

  This leads me to think the problem may be with Tomcat itself, or with the IIS connector, but I don't know where to go from here, if that's the case. We ran all CF10 update via update 12 and did not initially again the IIS connector through wsconfig.exe and restart IIS, but did about a month or two ago.

  We have also adjusted the JVM settings a bit:

  -XX: MaxPermSize =192 m-> 256 m

  
  

  and set the size of the JVM min and max heap on 2048 (from 1024). We have 6 GB of RAM on the dedicated server.

  
  

  Here is the use of the memory of the FMV of the time of the accident (green dots down indicate the restart of the server)
  

  

  The rise without any garbage collection operation is the same as we saw the last time that the server crashed as well. I have logs of Fusion analytics since the last crash, if everyone would like to see a specific chart.

  Any suggestions would be greatly appreciated. Thank you.

  Hello

  ISAPI log errors seems tomcat at the end of CF does not meet tomcat iis connector. Probably, you will need to make some adjustments or set values server.xml in cfusion\runtime\conf.

  What are the values? This blog CF11 entry can help since the details also apply to the CF10.

  http://blogs.ColdFusion.com/post.cfm/ColdFusion-11-IIS-connector-tuning

  Keep in mind in making adjustments to the corresponding changes server.xml should be applied to workers.properties in config\wsconfig\N.

  You could also do a surveillance with jdk free tools such as jconsole to know what values of adjustment would be based on better load type. Java and tomcat monitoring tho is time and effort if response on thread if you want to know more about how to track.

  HTH, Carl.

• push does not work after about a month

  Hello

  I may receive the push on the device a month ago. But when I try today, I couldn't get the push on the device no more.

  Server side, I saw this response from your server push:

  "" http://www.openmobilealliance.org/Tech/DTD/pap_2.1.DTD"> <> push-id ="pushid"- sender address ="http://cp4348.pushapi.eval.blackberry.com/mss/PD_pushRequest " -nom_expediteur =" RIM Push-Data "response-time Service =" "2013-12 - 20 T 18: 58:21Z" > "

  But I can't receive the thrust on the device.

  Thank you.

  VNet wrote:
  Furthermore, is it possible to change background app before or auto-start the app and bring it to the front once the application gets the push? I think that this can be done in 10.0/10.1, we can do it in 10.2? If so, is there an example of code to do this?

  No, applications are not capable of leading themselves. The preferred route would be to add a notification on the Hub, which the user can use to launch your application.

• Second SSD dies after only 13 months

  Hello

  I read the topic of the 'death of SSD on Aspire S7' on this forum.

  Having posted the following comments on it I thought that I would do better to start a new and share my progress with you.

  ----

  I read with interest the previous comments on the early failure rate, but what are the chances to get a reliable drive before the warranty runs out?

  I had the SSD on my M5 fail after about 7 months. Acer it replaced under warranty, but it has just failed again one month out of warranty. So 2 doesn't have a SSD in 13 months. Tech support said there is nothing they can do, but take care to have a replacement mounted. This doesn't seem fair to me. Not all happy.

  I'm waiting now dept UK_Escalations get back to me.

  --------

  Sent the complaint to the UK_Escalations 29/09/13 23:17 UK

  Receipt notification, 30/09/13 12.09 UK, the complaint received by them and an officer will be assigned to me shortly.

  10/01/14 16:50 UK.  I'm still waiting to hear from the officer.

  George

  Hi all

  Finally got resolved things.

  George

• Satellite L850-1PD increases sharpness disappear after disconecting AC adapter

  Hello everyone.

  I had a problem with my Satellite L850.
  When my laptop is running, he has increased sharpness, and after the pulling power plug and reinsert the sharpness has become normal. What is a problem

  Reinstalled PS more recent amd drivers did not help.

  Advice or suggestions please?

  What do you exactly mean by increased sharpness?
  Have you noticed this problem during the start-up of the device; for example in the BIOS?
  It is not using the power of the battery only?
  The same problem is seen on the external monitor?

  I'm not quite sure, but from my point of view of the rare if everything is displayed properly on the external monitor, then the graphics card driver as well as the graphic card isn t the problem

  Your comments would be appreciated!

• The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  I'm just looking to add the opening titles to the pieces of film of aprox 3 Germans, but everytime I try and save files for uploading to Youtube, then fail shortly after a minute. The sound and picture freeze while the counter continues until the end of the file.

  am driven crazy by this so any advice would be welcome...

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - see the menu on the left and others on the main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker Forums are good sources of information:

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
  http://windowslivehelp.com/product.aspx?ProductID=5

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• my computer screen stops working after about 30 minutes. Computer is not affected. What is the possible problem?

  Monitor turns off after about 30 minutes. Green light stays on. Computer keep going tom exploit.

  Must turn off monitor for several minutes before you post again. What is the possible problem?

  Maybe this article would provide a few ideas:

  Adjust Windows XP Power Options
  http://www.lancelhoff.com/adjust-Windows-XP-power-options/

• I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

  I have a TouchSmart 300-1007 that performs a hard block after about 30 minutes to be turned.

  Windows 7 Home Edition, the stock machine, even if it does even if I start in diagnostics (F9 at the start of the BIOS), so I doubt it has nothing to do with the operating system.

  By "hard block", I mean the screen goes black, the wireless keyboard is not flashing blue light on the USB FOB and the power button only turns off although it by hand for 30 seconds. I have to pull the power cord to turn it off.

  It started shortly after the application of the 5.12 version 2A8E update motherboard BIOS published 2011-03-24. Never should have done that; experience shows that I have more problems than improving when updatng BIOS' are.

  No heat problem (air vents are clean as a whistle). I suppose the best thing would be to restore the BIOS but I don't know if it is possible, or how to do it.

  This is my daily workstation and is now effectively a boat anchor / deadline / brick.

  Any ideas?

  Yay for me. My dose of GENIUS has had this problem for THREE DAYS running machine now without any problem whatsoever.

  It it CERTAINLY evil genius of this machine, no doubt.

  Other victims of the Touchsmart series should regroup and get some kind of compensation. I know that I had to buy a new computer to replace this one when it stopped working, and I spent a TON of time to solve the problem (it would be an easy solution to the factory; not so easy at home)

• MapleStory disconnects after about 2 minutes in Windows 8, no problems with Windows 7

  I just got a new laptop with Windows 8 on it. The specs are well above what is needed for the game, which shouldn't be a problem. I am able to boot and log in the game, but after about two minutes, it disconnects, gives me an error message saying: "unable to connect to the game server. Please try again later. "The window closes so saying me that I was disconnected. The game works perfectly fine on my old laptop, which is running Windows 7 and has worse characteristics.

  I tried to run in compatibility mode, but get a different error after blackcipher loads, but before loading the game, saying: "the instruction at 0 x 00649243 referenced memory at 0 x 05055215. The memory could not be written. Click on OK to terminate the program. »
  I've looked everywhere and can't seem to find solutions.
  If it helps, my computer is a dv7 HP Envy with an Intel i5, 8 GB of RAM and a 2 GB nvidia geforce GT graphics card.
  If anyone knows a solution to make it work, it would be most appreciated. It seems that a few other people have the same problems, but others with Windows 8 have no problem, so I hope that maybe it's just a setting I need to change.

  Hi Sannesteenhuis,

  Welcome to the Microsoft community.

  Please answer these questions to better understand the issue.

  1. Have you tried the steps by Pinaki displayed? If Yes, then what is the result?
  2. Have you tried measures to solve this problem?

  I suggest refer you to the following procedure to copy the Event Viewer logs.

  To view the events in the Event Viewer Application log:
  1. press the key Windows + X key and then click on Control Panel.
  2. double-click Administrative Tools, and then double-click Event Viewer.

  NOTE: Alternatively, you can start Event Viewer by starting the Microsoft Management Console (MMC) program that contains the snap observer of events.
  3. Click to expand Event Viewer (if it is not already expanded).
  4. click on Application.

  The events that are logged in the application log are displayed in the right pane.
  5. to view more details about a specific event, double-click the event that you want to display.
  6. to copy the details of the event, click the copy button, open a new document using the program in which you want to paste the event (for example, Microsoft Word) and then click on paste on the Edit menu.

  Also suggest you try to install the game in compatibility mode and check if it helps.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope that the information provided was useful. If you need other assistance do not hesitate to post. We will be happy to help.

• Hello.. I would like to know after you have reset my apple ID, I could not singin' in my phone

  Hello.. I would like to know after you have reset my apple ID, I could not singin' in my phone

  Make sure you follow the instructions of this Apple Support article:

  What to do when you have changed your Apple ID email address or password - Apple support

• After about 10 minutes connected my connection drops and I have to keep resetting my hub [BT Hub]

  After about 10 minutes connected my connection drops and has you keep resetting my hub [BT Hub]

  Hello

  What operating system is installed on the computer?

  Method 1: I suggest that you follow the instructions from the link and check if that helps:

  http://BT.custhelp.com/app/answers/detail/A_ID/7609/~/my-broadband-connection-keeps-dropping

  Method 2: Follow the steps in the link and check if it makes a difference:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• My computer would boot, but all programs would freeze after about 30 seconds. Now computer will not start help to...

  all programs would stall on 90seconds after departure upward, you can move the cursor, but nothing happens.  ATM the cpu does not start even upward.  I suspect a worm I can do?

  If you think that it is a worm or a virus, you can run a standalone virus scanner that starts from a CD/DVD or USB

  key. You need a working PC to create the media on.

  This is a stand-alone scanner: https://connect.microsoft.com/systemsweeper

  And here is the process of creation of the standalone scanner documented with screenshots:

  http://www.Winhelponline.com/blog/standalone-system-Sweeper-offline-scanner/

  You say that the PC does not start at all ATMs, which could also be caused by hardware or disk corruption problems.

  To see if his corruption of the disk, a secure boot (F8) and select "command prompt only. Then at the command prompt

  type: chkdsk c:

  It will then check the file system on drive C: for problems and if possible correct them.

  If it's a hardware problem... I can't.

  I wish you good luck.

• The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and sparkles in a pink/purple color

  I use Internet Explorer as my search engine and internet as my default msn.ca. The web page freezes several times during the operation, recovers after about 3-20 minutes, freezes again. Also, lately, the screen lights up and flashes in a pink/purple one color recovers to normal in 30 seconds approximately. I had an attempt of technician paid for help but couldn't. Can anyone help? Thank you

  Go to start / Control Panel / Internet Options / Advanced section then check the top box rendered = software use instead of gpu rendering / apply then OK.

  Restart all open windows ie11.

  For memory, Bing is a search engine ie11 is a browser and msn... is a home page.

  Any other number symbol use Gear and manage add-ons and toolbars and extensions and disable Adobe Shockwave element

• My computer acer laptop keeps closing after about 5 minutes in standby mode. Is it possible to fix this?

  My computer acer laptop keeps closing after about 5 minutes in standby mode.  Is it possible to fix this.

  Original title: power shutdpwn

  Hello

  Have you checked your power options?

  http://www.thewindowsclub.com/configure-power-plan-Windows-8

• My windows chassis disappers after about a minute by all adobe products.

  I have CS3 and adobe XI player and my disappers of chassis of windows after about a minute. In my opion this problem starts by upgrading to adobe reader XI. Even if deinstalltion drive and all the problem adobe products persists. So please can someone help me?

  I wonder if you have Kapersky Antivirus?