Frames/layers consistent duplicated in gifs problem

Similar Questions

• Animated GIF - problem with Frame Delay

  Mac OS X 10.5.8

  PSE 6.0

  I just created an animated gif by following the steps in the help of PSE.  It says that I should be able to adjust the speed at which the images turn by changing the Frame Delay measure but I am unable to change it.  In fact, I am unable to change anything in the Animation of the dialog section.

  When I check the Animation, the options appear to become active (they are gray is no longer) but I can uncheck the loop option or change the Frame Delay option.  All other sections of the dialog box work fine.

  Your help would be most appreciated!

  Beth

  Unfortunately, it's broken in PES 6 and 8 of PSE. You can tab into the frame delay box if you start on it somewhere on this side of the screen and it appears to allow you to change the rate, but your choice does not really affect the actual rate. The only solution is to duplicate the layers image that you want to remain on the screen longer (so it will change just as fast, but not obviously).

• Record animated gif problem

  Hello!

  Just for fun I was intending to change a gif of tackle football animation. I intend to remove the player attacking every frame of the animated gif image. So it would take time to complete.

  I correctly opened the gif in CS6 via import of video frames to layers.

  It consists of 72 layers and I tried to fix 10 of them just to see how it would roughly look like.

  My problem comes when I try to save and restore the GIF (via save for WEB).

  The first 10 images of my gif displays only an image of freezing, and then it shows the rest of the 11-72 without any problem.

  What am I doing wrong, because my layers edited does not appear in the final GIF?

  

  Right away! Easy solution.

  First of all, the reason why your first 10 frames do not change is because each of these images shows the same layer (Layer 1).

  • In your layers panel, you have 1 layer visible value and all of the other layers are invisible. It's good for image 1, but for part 2, you'll want to do 2 layer that is visible.
  • Click on image 2 in your editing panel and then check the eyeball icon to make the visible Layer 2 ! Do the same for the frame 3/Layer 3, Frame 4/layer 4, etc until you reach the end of the animation!

  

  

  For the second problem, to make frames from layers option is grayed out because you already have pictures in your timeline.

  • Go to your timeline panel and select all the images and delete them.
  • Then select all your layers in the layer panel, right click and choose the Images made of layers... you should be able to click it once your Timeline is disabled. It will automatically create the images that range from Layer 1 to your last layer (so you wouldn't have to do it manually as above ^).

  

  Anyway should take care of your problem! Please let me know if it works for you!

  See you soon,.

  Michael

• Animated GIF problem

  Hello

  I use a GIF image for the design of the loading bar

  The image is a black & white gif image that is his black image with white animation on it. but the problem is when I tried to load the image in the encodedImage holding corruption when shading is displayed. I tried the app with thread of animation. Also, I tried to draw the picture in a class that extends BitMapField. the problem still persists. Any idea on a question also

  This is the code that I had to use for gifs:

  Standard paint:

      protected void paint(Graphics graphics)
      {
          //Call super.paint. This will draw the first background
          //frame and handle any required focus drawing.
          super.paint(graphics);
  
          //Don't redraw the background if this is the first frame.
          if (_currentFrame != 0)
          {
              //Draw the animation frame.
              graphics.drawImage(_image.getFrameLeft(_currentFrame), _image.getFrameTop(_currentFrame),
                  _image.getFrameWidth(_currentFrame), _image.getFrameHeight(_currentFrame), _image, _currentFrame, 0, 0);
          }
      }
  

  The paint that I used:

      protected void paint(Graphics graphics)
      {
          for ( int i = 0; i <= _currentFrame; i ++ ) {
              graphics.drawImage(_image.getFrameLeft(i),
                                 _image.getFrameTop(i),
                                 _image.getFrameWidth(i),
                                 _image.getFrameHeight(i),
                                 _image,
                                 i,
                                 0, 0);
          }
      }
  

• previous layers showing everything in gif playing cs6

  Hi the previous layers show when im trying to play my gif when ive downloaded

  all sounds good when im changing in photoshop, but once its registered and downloaded the previous layers start to appear

  using photoshop cs6 can IM someone help me please to get rid of these extra layers

  

  the layers are already hidden when im editing it's just once ive recorded that he does this

  "When you the frames in the timeline ctrl-click are they set to" do not throw your '?

• Black frames at end of animated gifs

  When you make banners using AE to convert 3 to 5 seconds of video in animated GIF, I noticed that there are always black frames at the end that appear each time the banner is played repeatedly. However, these frameworks do not seem to occur if the output is swf files. Y at - it a medium format or source to work around the problem of black frames with animated gifs? I not had this problem with other software gif animated, that I used, but the quality of the EA is better, other than this issue. Appreciate help with this.

  Just checked the help files and the SOUL supports animated gifs but only on Windows. Sorry I missed it.

  If you get black images at the end, then simply adjust the point of exit in the SOUL. You probably see a set cadence match. Fix you this in AE and not a SOUL.

  Useful for Animated Gifs should have a very low number of executives and a slow pace to be useful. 3 seconds to 29.97 FPS will make a big enough file for a banner size. Not see the project, but looking at the description I was wondering if your comp is 29.97 FPS, but you've made your gifs at 15 frames per second or even lower. If this is the case, that the black frames at the end could easily be the result of some funky things going on with the gif rendering engine.

  I still maintain my suggestion to use a film in Photoshop. Most of animated gifs that I created require different lengths for different periods. I'll start with 5 frames a.1 seconds for a transition, then hold the 6th framework during 6 seconds, then the transition to slide with 1 more pictures a.1 2 second, then the frame h 17-6 seconds and 12 seconds of animation gif with 17 images. You can't do that with the SOUL, you would end up with an animated gif with 120 frames for the same thing.

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• Mapping of LUNS ESX - id scsi is not consistent across the cluster - problem or not?

  Hello

  as a parenthesis in an associated storage workshop, the instructor said that on some site of the client, there was silence damaged metadata vmfs happening and the reason for it was locking issues that concerned the fact that the SAN LUNS Hat different scsi id on different Cluster nodes.

  I asked for references for this, but I got information on the verification of metadata etc.

  now, the reason why I'm asking here is, I found that some in our environment vmfs data warehouses do not have compatible scsi-id numbering on the Cluster. I thought it was just mostly a cosmetic problem...

  Two questions:

  1 are warehouses of VMFS data really at risk with this? Any reference to a KB or some experience on site? We have never had a problem with the warehouses of data so far.

  2. about the setting of this (we do it anyway), which is the recommended best practices to do?  Shouldn't a data store with a different ID Scsi remapping result in the data store that is detected as a snapshot?  Think we need to do some additional precautionary measures to avoid what is happening

  Thank you!

  regads

  Roland

  Take a look at this article for possible problems: VMware KB: can not see some or all VMware vCenter Server or VirtualCenter storage devices

  A requirement is to have uniform or a coherent presentation of the LUNS across managed VMware ESX servers. More specifically, must match the LUN ID for each respective LUN between all of the VMware ESX servers.

• Dealing with layers of duplicated scenes

  I use Flash CS5.5. I had an unfinished work on flash 8 and I'm under actionScript

  2.0 in one of my scenes I came upwards with a right button set up I wanted to use in all of my

  scenes. So I have reproduced the scene and proceeded to rename my layers on

  the new scene according to new content in the form of bitmap images. Well well, on the output

  I got warnings such as: 'reproduced the label on layers. My SWF is always showing normally

  but I don't know what to do with the warnings. Is there something I should have done other than

  double clicking directly on the old labels on the layers and change his name?

  If you receive warnings for duplicate labels, then chances are that you missed to rename some.  When you compile a file that uses scenes, all the scenes come together to form a long timeline it is so preferable if you do not repeat the same labels in different scenes.  It might still work, but historically using only scenes can be problematic when you mix in navigation (I will not use them in my own work), nevermind complicate duplicate of the label.

• Export or publish on animated GIF problems.

  Hello!

  I just did a SWF banner, but also my client wants it not as an animated GIF.

  When I publish the animation as an animated GIF, not only is the slower animation, but the lost colors their transparency, and makes weight jump 50 times.

  Here are the two:

  http://www.Chris.lafacade.com/maquettes/Cholette/big_box_flash.html

  http://www.Chris.lafacade.com/maquettes/Cholette/big_box_gif.html

  What I am doing wrong?

  Here are my settings: http://www.Chris.lafacade.com/maquettes/Cholette/settings.PDF
  I really need the GIF animation to weigh 39 k max.
  Thank you!
  Chris.

  Some things do not lend themselves to become animated gifs, especially if they are in competition with a version of Flash.  When it comes to the gif files you process compromise due to limitations of the color palette, representing deviations in color that you will find.  And with aniimated of the gif files, you deal with potentially hundreds of images gif individual trying to recreate what Flash anime very effectively.  Down the weight would require reducing the number of colors, to optimize each part of the animation and remove the components of the animations as well.

  Without knowing how much he weighs now, it is difficult to say if you could get any where near your goal of 39 K without ending up with a whole other appearing animation.  This is probably a case of one of those things where wants that the customer is not necessarily possible without compromise.

• How you frame layers

  I'm sorry if this is a stupid question, but I cannot find anywhere how to frame a layer. I just need to expose the layer around the text.
  
  Thank you
  
  Ryan
  [email protected]

  you mean like adding a border around a text section?

  Add

  front of text and
  After the text, you can of course change the hex value to any color

• Add static background pictures to all frames of animated gif

  First of all, I'm not a regular Fireworks. I use it when I have to do something (especially web optimazations). I would use it more, but frankly in many cases, the user interface is not intuitive for any other adobe makes.

  Here's my problem...

  I have to Add (not substitute) static type of basis to ALL frames (states) in an animated gif with Fireworks (with alpha), the image of the final product will be a part in the animation of web edge... Details

  I have a lively seq of a spinning object has been created in 3ds max and rendered as a png with alpha seq.

  I opened the SEQ "as an animation" in fireworks. I set the pace. He plays very well. So far so good...

  I imported an image I want to be BEHIND the seq animated on all chassis. I tried to put it on a layer of void behind, I tried to put it on its own layer behind, but it shows that on the first image (State).

  I tried to use 'share with all States', but it replaces images SEQ already on "States" rather than add behind them as in the arrangement of layers.

  So first, is this possible and if so, how?

  Secondly, why is it then process against intuitive in fireworks? I mean if the layer is behind something, then it should be a click on a single button or checkbox etc to say 'show on all chassis (States)', you know like any other adobe product brands. Same "ready image" made more sense than that.  My thought process that has been since I needed to find in fireworks to create and optimize the gif that I should be able to put it together again but it turns out to be much more difficult than expected. I guess I can just composite my elements in AE (which is a piece of cake compared to the Fireworks) and will then return to SEQ another think I import to fireworks to create optimized gif. While I'm a fan of the concept of 'creative suite', one of my biggest complaints about "suite" is the lack of oversite master so keyboard and fundimental UI concepts features common, shortcuts are evenly across all the apps so it works as a 'suite' and not just a collection of separate applications. I know that demanding that all applications of following certain rules would slow development, in the long run it would make it much easier for the end-user to spend more time being "creative" and less time trying to understand why something does not work as it does in other applications. Just my $.02

  Thanks for any help and or explanation

  Joel H

  From your original animation, create a new layer and then import the image into it. Don't forget to give your layer a distinct name not already in use by another layer. Don't bother trying to drag your layer to the position of the bottom of the layer stack. It's a nightmare. Instead, leave the layer to the second lowest position and then drag the layer of background (or background) above him.

  Once the image has been added to its own layer and this layer has been named and properly positioned, you are ready to share with other States. Select the layer in the layers, ctrl-click for the context menu panel, then choose layer part in the States.

• GIF/save for Web problem (PSE 7)

  I tried searching for an answer to this problem, but nothing seems to fix everything that happens.

  Recently, I had to replace my laptop and from Windows XP to Windows 7.  I transferred the PSE 7 from the old system to the new system and have had no problems with it - until now.  I have an image in format Photoshop 52 - layer I want to save as an animated .gif, with each layer as a different image.  File > > Save As has the ability to save layers as frames, but if I check it, then click on 'Save', nothing happens.  Nothing at all.  On my old system, I would get a new dialogue with options like the quality, duration by frame, loop, etc., but that doesn't happen any more, and there is nothing to save (if I'm going to find the new .gif file, it's just not there). If I do not choose "Layers in images", dialogue .gif does so very well and it has no difficulty to save it as a static .gif file.  But it seems that she won't just save it in animated format.

  I'm having the same problem with "save for Web".  Or the option of the file menu or typing command will bring up dialogue to let me record this way.  He thinks maybe a second, but does nothing else and does not record the image.

  I tried to reset the layout, just in case the dialog box has been moved somewhere that I wasn't just to see and I tried to reset the preferences to save it for the Web, but none of these things worked.  No explanation as to why a .gif animation 'layers as images"is the only format that is not saving correctly?

  I also tried old connections animated that I created with XP, and they will not re - save as animation connections either opening.  I get her "do you want to save changes" dialogue, but clicking on 'Yes' does nothing and does not record updates.  I am at a total loss for why this feature no longer works.

  If you right click on the shortcut of items and choose Run as administrator,

  It does make a difference or not save for Web work?

  Registration of the Web dialogue box is the same dialog box that you would get when checking the layers as frames

  in the Save as dialog box.

  MTSTUNER

• problem merging layers

  I CC15 and PS have used for centuries.  Never had this problem!  I had a picture with a number of layers and tried the Ctrl-Alt-Shift and E above the other layers and it does not look the same as what I had below.  I tried to merge down, merge visible layers, etc, but nothing worked.  So I started the merging of individual layers to see where the problem was and ended up with only 2 layers, but still can not merge them and get the original look.  Here is a screenshot of the two layers, a Normal down, top of page an overlay.  And then the second screenshot is what I still end up with!  I appreciate any help!

  Christina

  

  

  EDIT: I should practice typing faster... I'll just leave right now a bit redundant...

  What is happening is this:

  Seen in any other ratio of 1:1 (one screen pixel by pixel of an image), what you see on the screen is an overview of caching, resampled. Calculations are performed on this overview on the scale.

  The scale/resampling updated blurs NET angles and so introduced intermediate color values that do not exist in the original. When you flatten / merge, but not before, the full picture is recalculated.

  The effect is more pronounced in the "binary" as the art of black and white, lines frames of halftone (points) or images also very grainy and noisy. Yours would be in the latter category.

  Historically, I guess that this was done to speed up performance. If it is absolutely necessary these days, I don't know, but in any case, it's probably a major rewrite of the entire code Photoshop to change that now. OTOH there may still be reasons to do this way.

• Why import video images to layers cut half top of each frame?

  I had been using the product very well, then I restarted my computer one day and when I went to use photoshop, what happened. I have imported the video images of layers to make a gif, but was met with each image is missing its half superior. Why? And what can I do about it? I tried to reinstall, etc.. None of this has worked.

  Thanks for the help, and it was interesting.

  Now that you have explained interlacing I'm fairly certain that's not the problem. The way which explain the video blacked out areas appears more like a zebra pattern, and I am not importing old analog, for most of the DVD.

  I opened the other clips I downloaded and they work fine. It's only when I import videos that I created using a screen recorder on my computer on which they are cut in half.

  I'm guessing that this is the problem, but I do not understand why it became suddenly one as I have used for centuries.

  I guess the screen recorder could make interlaced videos.