FreeCell, solitaire and spider solitaire are now black and white after Windows update

Similar Questions

• Empty (black) screen boot after Windows updates

  I had this problem on two computers this week... until now. Run windows update after I restart the computer. When the computer reboots, they can start to a blank screen (black). These were not updated video card basis. Also, I tried to use the safe mode, but it crashes on MUP. SYS. I ran chkdsk... and who has not fixed it. Any ideas other then a new installation? Thanks for your help!

  Kevin_C_K,
  You said you ran chkdsk and it didn't fix it, but it will report all the problems?
  If you are still having this problem here is a couple of things to try (if you haven't already done so).
  Run the sfc/scannow utility.
  When you have run chkdsk if you do not use the /r switch, then repeat the it like Chkdsk/r

  After the clean installation, update you all hardware drivers before you start the Windows updates? Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The copied images are reversed black to white since the update to El Capitan - any ideas on how to switch back?

  Since I updated to El Capitan I struggle with copied images are black on a white background stuck reverse - white on a black background.  Has not happened before and I would like to have the images than the original paster.

  Where is - what happens?

  Photo.app? Preview.app.?  Files in folders?

• Problem with the help and support after Windows Update

  Hello

  After downloading some updates from microsoft, I now cannot open the option "help & support". It is said ' sorry Internet Explore cannot download / help.

  Anyone got any ideas how I could restore the option ' support & "?

  concerning
  Dale

  Hello

  It would be useful to tell us what operating system you have and what computer you have. Regarding your problem:

  who help and support option do you mean? Help windows?

  Moreover, already checked the website of microsoft? Would be useful for you since almost all topics around the windows are covered here.

  Visit this link for the support of the MS Web site: http://www.microsoft.com/europe/

  Welcome them

• BSOD error codes and stop after windows update

  Hi all.  I have a computer dell laptop, inspiron e1505. 2 days ago, he did a system update and then restarts are not at all. If I start windows normally or start with the last known good configuration I get the BSOD and stop error codes, 0x0000007e, 0 x 80000003, 0x805c370c, 0xf79e02b4, 0xf79dffb0.
  If I try to any safe mode, it begins to go through a list of drivers then stops briefly and goes to a blue screen Uni with no writing at all.   It's beyond what I know how to fix.  Thanks for your time

  Kb971486 uninstalled by using the recovery console, works again.

• I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

  I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

  Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

  That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

  Good luck!

  =======================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• lost preferences and connections after installation update

  lost connections and preferences after install update today
  
  Hello
  I have just taken the real update with the Update Wizard
  but now all my preferences and far and missing connections.
  
  Why the wizard asks to update from a previous version,
  When to replace my preferences?
  
  my being the question Wizard is not accurate enough to see what to do for a user 'normal '?
  
  
  Can I get my old preferences?
  
  concerning
  Norbert

  This might help in your situation

  Upgrade problem. The lost connection.

• My computer guard restarting itself over and over after windows xp screens.

  My computer guard restarting itself over and over after windows xp screens. He did the same when I try to put it in safe mode. Is it that I can do to get at least pass this screen?

  Kheta salvation,

  1. Did you the latest changes on the computer?
  2. You receive an error message?
  3. When was the last time it was working fine?

  Start the computer by using the option disable automatic system error reboot and check if you receive the error message, and post back with the details.

  1. Restart the computer.
  2. As the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.
  3. Use the arrow keys to select disable automatic system error reboot and press ENTER.

  If you do not receive the windows logon screen, then refer to the article below and try the steps mentioned.

  Windows XP logon screen does not appear and the computer continuously restarts

  http://support.Microsoft.com/kb/310396

• renovated, install XP SP2, valid and cannot access windows update

  Hello world

  I reformated my desktop PC, install XP SP2 original frommy OEM drive, valid and cannot access windows update.

  All solutions?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3-getting-error-0x8024400a/a71b55ee-10d4-410C-8b0b-a2114f7d8b94

  UTC/GMT is 20:23 on Sunday, October 28, 2012

• Cannot view full screen flash and silverlight media after Windows Update

  problems with flash and silverlight Muslim poor after windows update said updated the driver and will not play in full screen right.

  Windows Update told to update the driver of the GUI.  After I did my computer do not play in full screen with flash and silverlight. It makes a square with 3 inches on each side.  previously, it would fill the entire screen.  I already talked to Nivdia and they helped me to install again and it runs right is not their product.  I don't know if it's the Avermedia driver then that is the problem.  I have windows vista 32 bit.  When I try to click with the right button on the silvery light, it causes the failed computer.  I uninstalled flash light and silver and it does not solve the problem.

  Windows Update told to update the driver of the GUI.  After I did my computer do not play in full screen with flash and silverlight. It makes a square with 3 inches on each side.  previously, it would fill the entire screen.  I already talked to Nivdia and they helped me to install again and it runs right is not their product.  I don't know if it's the Avermedia driver then that is the problem.  I have windows vista 32 bit.  When I try to click with the right button on the silvery light, it causes the failed computer.  I uninstalled flash light and silver and it does not solve the problem.

  ===================================
  It might be worth a try to do a system restore to
  an hour before installing the updated video driver.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• CELL FREE AND SOLITARY LOSE COLOR... THEY ARE NOW BLACK AND WHITE... Help!

  HOW CAN I CHANGE THE SOLITAIRE AND FREE OF THE BLACK CELLS CARDS AND WHITE IN COLOR?  thanx

  I don't have to try the solution from Mike again. But just I uninstalled my graphics card and reinstalled again drivers and its good as new. I came here to post the answer, but I was beaten, no worries. No more black white freecel!

• Lost all bookmarks and hyperlinks are now black! (Mac)

  When using firefox, my browser froze that I ran out of memory. I tried to close some windows, but the browser has been suspended, however it was frozen, I had to force so quit smoking. When I re firefox open all my favorites have disappeared, as well in the bookmark folder and the toolbar. I tried to restore, but it gives the error message "Unable to process The Backup File". I tried after the support pages with no luck.
  I also tried 15.0.1 to 14.0.1 decommissioning but it made no difference.
  Also, I noticed when I was with google to search for help all hyperlinks are now showing in black instead of blue! What is happening with several web pages.

  Is it possible to manually restore the bookmarks folder or is it impossible? I can't understand how to solve this problem.

  Latest version of Mac OS x, I'm running 10.5.8 is
  The current version of Firefox is 14.0.1

  Thanks in advance to anyone who can offer any help.

  I would like to say that I solved this problem myself.
  Decided to risk using the button 'Reset firefox' (help > troubleshooting information > reset Firefox) which worked a treat. As soon as I pressed it, everything has been restored! I am surprised that I have found that this referred to in the help docs.

  Hope this can help someone in the future.

• frozen computer and now it is black screen after Windows Update

  My computer automatically starts an update of Windows today and it has been locked or frozen for 2 hours. All I have now is a white screen. What should I do?

  (written on my iPad that works)

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

• I got the Conficker virus and now I can't get Windows Update to work

  I got the Conficker Virus/worm infected my system, but have now got rid of him (I think).

  I noticed yesterday that Windows Update has just stopped working, it has a red symbol X and said 'windows update cannot currently check updates because the service is not running'. Then, I figured that it could be a virus and tried to download AVG anti-virus, but the virus stopped me to access a website or a program to do with protection against viruses (including all Microsoft sites). Finally, I used a separate laptop and negative to download AVG and some other anti-virus/malware programs and down them mode without failure. I then ran Windows malware removal tool. That seems to have gotten rid of the virus (which has been identified as Conficker), I can now go to any Web site, so it seems that the virus is gone or disabled.

  However I can not even access Windows Update. My guess is the virus disabled some component of it, but how now operate again? Is it possible to re-enable it manually? Or y at - it something that I can download to fix?

  Hello

  Conficker often comes with other malware, so once you think that you're rid of him real problems then begin run through
  They are 100% sure that everything is clear and get it fixed.

  For those who think they might have Conficker:

  You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.

  Check with this site
  http://www.confickerworkinggroup.org/infection_test/cfeyechart.html

  Alert on the Win32/conficker virus
  http://support.Microsoft.com/kb/962007

  Protect yourself from Conficker
  http://www.Microsoft.com/security/worms/Conficker.aspx

  How to remove the worm Downadup Conficker (Uninstall Instructions)
  http://www.bleepingcomputer.com/virus-removal/remove-Downadup-Conficker

  How to manually remove the Conficker worm
  http://www.411-spyware.com/Conficker-worm-removal#how-to-remove

  BDTool to remove
  http://www.bdtools.NET/

  -----------------------------------------------

  Run the removal tool malicious Microsoft, Scan with Malwarebytes and run Prevx to be sure he's gone. (If necessary
  use UnHackMe below).

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  --------------
  Run these:

  Malwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
  http://www.Malwarebytes.org/

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------

  Here are some free scanners online help if needed (skip if not):

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Run Malwarebytes when you can.

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  Close IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Don't forget to do:

  Logon as administrator

  Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN

  Enter each of these one at a time and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset
  ------------------------------------------------------

  Here are a few rootkits if it were a question:

  SpyDLL Remover - free
  http://securityxploded.com/spydllremover.php

  Advanced Windows Service Manager
  http://securityxploded.com/winservicemanager.php

  Run the Rootkit Revealer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspx

  UnHackme - trial 5.5 or later version
  http://www.Greatis.com/UnHackMe/

  This tells you how to use UnHackme and has a link to the version 2.5 - use in good standing with
  the current version available as above is 5.5 or later
  http://safecomputing.umn.edu/guides/scan_unhackme.html

  IceSword - free
  http://www.AntiRootkit.com/software/IceSword.htm
  Instructions and pictorial
  http://securityxploded.com/IceSword.php
  Tutorial for use of IceSword
  http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3D

  Revo Uninstaller - free
  http://www.revouninstaller.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Error message: "the site has encountered a problem and cannot display the page you are trying to view", while running Windows updates.

  Original title: Windows updates works do not, cannot get windows updates

  I had to reinstall Windows XP service pack 2. I went to the updates and got this message. The website has encountered a problem and can not display the page that you are trying to view  I tried several times and got the same results.

  The problem is that you need to install Service Pack 3 before being able to get all post-SP3 updates. :-)

  Here's what you need to do:
  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.