Bluetooth HP 3520 or AirPrint

Similar Questions

• Series HP Photosmart C309a: windows 10CD

  Before upgrading to Windows 10 and the latest drivers from HP, I was able to print to iPad and Iphone but only the elements of my browsers. Bluetooth and Airpriint have NEVER worked on this printer. But at least I could pull up a recipe in Safari and print from anywhere in the House.

  None. The new Center Solution HP now has three buttons where previously he had eight. I can't find where to find my printing in HP on my apple devices applications. I can't always connect bluetooth LAN or wireless Airprint.

  Where are hiding the commands to do this?

  HI @ECWriter,

  No problem. Here's how I recommend you do the installation:

  • Click here to install the printer on the Windows 7 computer
  • Follow the prompts as you go along - if you have a usb cable that allows you to connect directly to the computer at the beginning of the installation. When go you further in the installation, you will be able to connect the printer to your network wirelessly via the printer software.
  • If you are able to install and turn the printer on the network wireless successfully, the installation of Windows 10 should go much smoother. You can use the link above to install the printer on the 10 PC set Wizard and it should be able to detect the printer on the network from there. This will also pave the way for restored on your iOS devices use.

  Let me know how it goes.

  Kind regards

• Improved connected IPad Windows10 private WiFi network w/AirPrint printer. Bluetooth is disabled. Try to print an e-mail, the IPad can't see printer. Android phone works wirelessly with the printer.

  IPad on the same wireless network private Wi ' Fi as computer windows 10, Android phone and Samsung printer airprint. Blue tooth is disabled. Can I wireless print with Android mobile phone, but not with the IPad... suggestions.

  Have you tried to reboot your router? Unplug it, count to 10, plug back in and let it boot and see if she sees the printer now. You might also want to disconnect/reconnect your printer, leave everything to make a new connection.

  You can also force your iPad to restart. Hold down the button sleep and home for about 20 seconds. When you see the silver Apple, let go and let it restart.

• Bluetooth wireless connection

  MacBookPro OSX El Capitan; Version 10.11. Retina display - MacBookPro connects to the printer HP C6150 help electrician with no problems. not then attempt to use the bluetooth connection.

  To a printer wireless connection works using old MacBook. Bluetooth connects to the mouse and works very well.

  Select the Bluetooth device-

  The computer icon shows - not connected

  Apple mouse - connected

  Hello analyst.1,

  Thank you for using communities of Apple Support.

  I understand that you can print from your MacBook Pro to your HP using Ethernet and wireless printer, but not via Bluetooth. I know how it is important to ensure that you can connect to your printer via Bluetooth. I'll be more than happy to help you with this.

  Use OS X El Capitan: Add or remove a printerand make sure you have the latest version of the software installed and printer connection instructions, specifically, this section:

  Add a Bluetooth printer

  1. Update your software: choose the Apple menu > App Store, click updates, and then install the listed software updates. Even if no updates appear, this ensures that OS X has the latest information on printing software you can download from Apple. If you don't do this, you see a message that software is not available when you connect your printer.

     If you have a printer AirPrint, you have no need to check the software updates.

  2. Prepare your printer: use the instructions that came with your printer to unpack the printer, install the ink or toner and add paper. Turn on the printer and make sure it is not the display of errors.

  3. Connect your printer: follow the instructions that came with your printer to make sure it is ready to connect through Bluetooth. You must also make sure to activate Bluetooth and set up the printer Bluetooth as a new device.

  After connecting your printer, if you see a message prompting you to download new software, be sure to download and install it. OS X will automatically use AirPrint if your printer supports.

  Have a great day!

• Air print with my HP 3520 printer?

  I LOOK can print from my iPad or iPhone 6 on my printer HP 3520 thanks.

  Hello

  Yes, it's an AirPrint printer:

  http://support.HP.com/us-en/document/c03274848

  As long as they are on a wireless to the SAME network, you can use AirPrint for printing.

  Kind regards.

• LaserJet Pro P1100w: Then my LaserJet Pro P1100 AirPrint phone without wifi connection?

  My LaserJet Pro P1100 AirPrint phone without wifi connection does

  Hello

  iPhones and AirPrint works only via a wifi connection (no bluetooth or other options will work) without a wireless connection any (direct or normal wifi), you will be unable to print wireless.

• Trying to airprint from iPad 2 with a new 6510. message of frequently without air printer found help

  HP 6510; error-1 message; About 10% of the time printing works of the 1st try. More frequently, it is a painful process. Have an ATT & T wireless connection that appears strong. At least 3bar and shells, but the error message is that no printer no air is. I am a novice and don't know what to try. I had hands on ethnically support guru of Apple and can't find any problems.

  Hey there. AirPrint works in Wifi and not by a cellular network. Make sure that your printer and iPad are both connected to the same wireless network.

  Check out this link: printing from an iPad that will give you training on the different applications available to print from your iPad and how they work.

  See also: "the printer is not found", "no printer not Found" or "printer offline" Message appears on the iPad, iPhone or iPod Touch this will help you to solve the problem more in depth. Just make sure that you two devices (printer and iPad) are connected on the same wireless network. Also, make sure that Bluetooth is disabled when you try to AirPrint. Bluetooth has a tendency to interfere.

  Hope this helps and post back if you have problems to make it work.

  -Sean

• Basic for ePrint AirPrint troubleshooting

  Some of our users have temporary problems with AirPrint, ePrint and using our Web Services provided by the ePrintCenter website. There may be a number of issues which can lead to these problems, but I am giong to do my best work to try to help understand them.

  With AirPrint, you deal with just your local network. If you are having problems with AirPrint, here are the first steps you can take to correct the problem.

  1. make sure that both devices are on the same network and share the same SSID. Sometimes a single device will be connected to a network of "guest", and this will prevent the cross-communication.

  2. turn off Bluetooth. Rarely, but I've seen that happen before, Bluetooth will interfere with communication with our printers. This is because AirPrint was written to use the same Bluetooth channel. And as having two stations radio which are very close to each other, you will sometimes encounter interferences that prevent the signal.

  3 reconnect the printer to the wireless network - simply run the Wireless Setup Wizard solves many connection problems

  4 set your printer a static IP and DNS from Google (at the bottom of the screen of the configuration should read the 8.8.8.8 and 8.8.4.4). Here is a video on how to set that-

  http://www.YouTube.com/watch?v=llYNMNKJMX4

  5. after that, if you are still having the same problem I have run a network reset, so that all devices reconnect to your network and servers correctly. Firstly turn off your machine (and other devices on the network that you want to communicate with the printer [e.g. phones/tablets]), then unplug your router, after 10 seconds reconnect the router. Once the lights are all back to normal power (flashing, stable or not) the machine followed by your other devices and test print again.

  With ePrint and our printer enabled applications, sometimes it will be not able to be used temporarily. Like most networks, the cloud of HP traverse time periodic when the servers are down for maintenance, maintenance and update. These could cause temporary outages in some of connected applications as well as some of the services provided by HP.

  However, if you encounter problems in the long term with ePrint printer applications, there are a few things you can do to correct the problem

  1 reconnect the printer to the wireless network - simply run the Wireless Setup Wizard solves many connection problems

  2. give your printer a static IP and DNS from Google (at the bottom of the screen of the configuration should read the 8.8.8.8 and 8.8.4.4). Here is a video on how to set that-

  http://www.YouTube.com/watch?v=llYNMNKJMX4

  3. after that, if you are still having the same problem I have run a network reset, so that all devices reconnect to your network and servers correctly. First turn your machine off, then unplug your router, after 10 seconds reconnect the router. Once the lights are all back to normal power (flashing, stable or not) the machine on and test the connection to the server.

  4. Finally, if these measures fail, you can disable and re-enable web services. This will make you lose your custom printer e-mail address and you will remove the information from your printer to ePrintCenter origin and reconfigure the applications and services you want. However, if necessary, you can contact our free support number below (for US and Canadian customers)

  1-855-785-2777

  I hope this information is helpful to you and if you have any questions, feel free to PM me or link me to a thread on the subject.

  Spend a day here is a nice photo of a puppy and wonderful!

  

• Bluetooth for HP D1560 printer?

  I can't find any info on the ability of my Bluetooth printer.  I found a HP for printers bluetooth adapter and a small adapter change squares the printer port to a port of rectangle to accept bluetooth device, but no need to buy these if it does not work!  Thanks for any advice, Sandra

  Please specify,

  The HP Deskjet D1560 is a USB printer, using any accessory will not any caoabilities mobile devices as the printer does not support enforcement ePrint AirPrint.

  Such you will need another printer, a Direct wireless printer allows printing through a wireless network without router.

  For example the Deskjet 2540 support Direct to print wireless devices and printing from iOS:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-DeskJet/A9U22A?HP-DeskJet-2540-all-in-one-printer

  Hope that helps,

  Shlomi

• No wifi, Internet or bluetooth

  I'm running a 3520 Inspiron with windows 7 Home premium. I stopped it and when I re started it I have no wifi or Bluetooth. I tried hard wiring for the modem and still nothing. I went to the Device Manager and there is a yellow flag next to Dell Wireless 1703. 802.11b/g/n (2,4 GHz). When I right click on it I get this message: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is incorrect or damaged, or maybe it's a malicious software from an unknown source. (code 52) I have not added or changed anything. What is the problem and what can you do about it? Thank you very much

  Hello

  Lioness7228

  I'm running a 3520 Inspiron with windows 7 Home premium. I stopped it and when I re started it I have no wifi or Bluetooth. I tried hard wiring for the modem and still nothing. I went to the Device Manager and there is a yellow flag next to Dell Wireless 1703. 802.11b/g/n (2,4 GHz). When I right click on it I get this message: Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is incorrect or damaged, or maybe it's a malicious software from an unknown source. (code 52) I have not added or changed anything. What is the problem and what can you do about it? Thank you very much

  ! If reinstalling the drivers did not work, you can also try to restart to fix options by pressing f8 at startup until... on repair option, choose allow not digitally signed drivers, then continue to boot. If still nothing works, go to Device Manager, uninstall the drivers with the yellow flag. turn off your wifi by pressing fn + f2 key. Then turn it back on by pressing the same keys again. On the upper part of the page in the Device Manager, click the action tab, and select check for material changes...

• Bluetooth cannot find any device?

  Hello. I have Inspiron 3520 with Win 7 64 bit. My Bluetooth driver is installed but cannot find any device. That is to say that I'm unable to connect to my smartphone via bluetooth. So please help me guys. Who will appreciate.

  Hi Misbah,

  Please keep us updated.

  This error can also occur if you do not have an installed device driver or if you have a device driver obsolete for your Bluetooth device.

  To resolve this problem, you need to install the driver for your Bluetooth device. If the unit comes with a CD or a DVD containing compatible with your version of Windows device drivers, insert the disc in the drive and follow the instructions to install the driver.

  If your Bluetooth device came with a driver disk, you will need to go to the device manufacturer's Web site and download and install the latest driver for your device. To do this, visit the hardware manufacturer and browse the latest Bluetooth version for your device driver. Follow the instructions.

  Please see: error: "Pilot of Bluetooth device not found" when you try to connect a bluetooth device

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• B210a won't airprint

  everything works fine but the airprint

  I did everything suggested the support page, but it will not airprint

  Looks like everything is going well, my iphone, ipad and itouch all detect the printer and it seems that he sends it but nothing every lot of the printer

  I turned off the bluetooth

  I put it closer to the router

  I tried to turn it

  I think I did everything. Help, please

  Hello

  Airprint uses Hello pockets that depend on IP multicasting, it might be caused by no. Multicast support by the router or protocol can be disabled by default.

  To identify the problem and check if it is related to your router or not, please try temporary of the iDevices directly to the printer (ad-hoc connection) and check any changes:

  http://support.HP.com/us-en/document/c02945489

  If you are able to print successfully using direct connection, please specify your brand of router, model and firmware version in order to better understand any possible cause.

  Kind regards

  Shlomi

• HP3050a and AirPrint

  I recently bought the printer HP3050a because it was compatible with Airprint.  Once I have everything configured via my PC, I tested the Airprint from my iPad and iPhone / ws all ok.

  Hopwever, now I think it's impssible to print from an Apple device - he says just "printers AirPrint No Found.

  I am able to print wireless via my laptop and PC, but just not to use my Apple devices.

  The only method that I found that works are physically disconnect frm electric network printer and then plug it back in - this kind of him gives a kick to the top of the back.  But certainly this isn't the answer is?

  Can anyone help please?

  I hope you are well and sorry to hear that you're having this problem;

  Although you could print on the 1st by devices to check if the router supports Hello (MDNS)

  The moment you try to print you have devices with bluetooth activate please unable it is known to cause problems. Turn off Bluetooth is to test whether that creates a problem.

  Is that upgrade to the updated IOS devices.

  This article will give you a full GO HERE troubleshooting guide

  Please let me know if I can help you further and at your convenience, read this POST and include information for all members of the community have the best change to help you further.

  Best of luck and hope this helps.

  RobertoR

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!