Freezing of HP G62 Notebook PC (Windows 7)
HP G62 Notebook PC (Windows 7)
[email protected] CPU Dual Core processor - Pentinium
My hp laptop hangs when I start using it in 5 minutes. I turn off power button and restart again. It happened once or twice when I start using my laptop. After that, any day is fine. But it happens every day once or twice, when I start using my laptop.
I run the microsoft safety scanner. He says I have no infection by the virus or spyware, malware, etc..
Any idea or Recommendation is very much appreciated! Thank you.
Hi read,
You are welcome
Try a new installation of the flash plug-in as follows.
First, download the Flash uninstall utility on the link below and save it in your downloads folder.
Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller. After this has completed, restart the laptop.
Then (unless you already have it), download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before download.
Close all browser windows before you run the installer of Flash.
Start Firefox and see if the videos etc. play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same link Adobe Flash above to get a command prompt to install the ActiveX component. Once completed, restart Internet Explorer.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
HP G62 Notebook PC: windows 7
I had a problem downloading the updates of Windows 7 on my laptop. All started a month ago (maybe a little longer) where the next last or third to last multiple improvements would be blocked and never completed. I'd go to sleep, get up the next morning, and the computer would still be trying to download the upgrade. Finally, finally I must manually shut down the computer, but now I find that my system is running slower and my browser is really running slower and I can't stream videos (Netflix, etc.).
I tried to reinstall Windows 7, but these efforts would also be well stall and I don't know what to do anymore.
Can anyone offer any help? Thank you-
Alonzo
Hi Mohammed - Thanks for your quick response. However, my problem is more complicated (I think).
Speed is not a problem - I high speed wifi, connected by a land line (Time Warner Cable).
Automatic updates have been in place for some time, it is so when I shut down the computer on which the computer will download the updates before shutting down. Then when I turn on the computer again completes the installation.
However, in my case, I will try to stop the computer he hang on update "9 11" or "2 of 4", or "16 of the 20". " And it blocks there for hours (as I said it hangs during the night) making it necessary for me to force a shutdown.
A result (I presume) is my computer not effectively streaming. My other devices stream just fine - just not my laptop.
Any thoughts? Thank you-
Alonzo
-
G62-b51SI | XT896EA | G62 Notebook PC Window 7 Home Premium no boot
Laptop does not start, the self-test of the disk gives error codes 03F1, 0303 and 0301, how do I get it back
Replace the HD and recovery disks to restore the image. Call HP support if you're still in warranty.
-
Example: G62 Notebook PC: Max RAM
My name is HP G62 Notebook PC Core I3
My type of system is 64-bit, 64-bit operating system
My window is Windows 10 pro
the question is: if my laptop can be upgraded to 8 g. Ram or not?
Hello Ahmed,.
This is the information you request.
Supports up to 8 GB of memory system
Supports dual channel DDR3 1066 MHz memory
In this case, it supports 8 GB of ram, but you must have 2 modules of 4 GB each on DDR3
Please let me know if you need something else.
Concerning
-
HP G62 Notebook PC: Completely disable the secondary graphics card
Hello
I have a HP G62 Notebook PC that I bought a couple of years back. The problem I have is that the graphics card of (the age AMD) to the secondary address has been damaged by hardware components (probably due to multiple disconnections of power and unexpected stops). Everything else works fine. This problem is causing Windows to keep crashing through the blue screen, or not to display a picture at all after the Windows logo while booting. I managed to install Ubuntu on it and the operating system detected the damaged graphics card and worked around it (aka he turned off the power to the graphics card damaged and worked only using the Intel graphics card). My question is, is it possible to turn off the graphics card AMD to turn completely (from the BIOS maybe) so that I can re-install Windows and work on it using only the graphics card Intel?
Please help, I'll provide more information if necessary.
Please identify your laptop with its full product name or product number. You gave only a partial identification so far. I need I can take a look at the BIOS Simulator to see if it was possible there.Never mind providing the number or name of producty. I worked around it.
I just took a look at the BIOS Simulator and found that there is no option to turn off the graphics card it. You may be able to work around it by removing the card.
You can also replace the card with a card of the same work to find the switchable graphics feature. You should be able to find one to an online vendor at a reasonable price. If you don't feel able to do it yourself, then you can have the replacement carried out by a store.
-
HP G62 Notebook PC bluetooth does not
Hello
I just got a HP G62 Notebook PC (product: WV689AV) and try to get the bluetooth to work.
I can't get my phone to connect to him while I'm able to make my cellphone to connect to an iPod succesfully.
Neither the phone nor the PC can be.
The lap top I have the following settings:
Discovery
Allow Bluetooth devices to find this computer
Connections
Allow bluetooth devices to connect to this computerAny help is appreciated. Thank you
Mike
What is Windows Home Premium 64-bit?
Have you tried to use the HP Support Assistant's to find the driver?
In Device Manager, right-click on the device Bluetooth (Personal Area Network) and select Properties. In the Properties window that opens, select the Details tab as in the picture and select hardware ID. Please any information resulting post here. You will notice that I proposed two ways to locate the driver. Support assistant might be the fastest method at your disposal. The second method requires a little research on my part.
Best regards
ERICO -
HP G62 Notebook PC no HP logo at startup 30 sec to post. Is this normal?
HP G62 Notebook PC no logo HP takes 30 sec to the position of the system. After that, it seems fine. Is this normal? What can I do
Meanwhile he's announcement. You can probably enable POST messages in the BIOS see what is happening during this time. Startup on a Windows 7 computer could be considered normal up to 2 minutes, Windows 8 is going to be substantially faster than that, especially on a Solid State Drive.
-
HP G62 notebook PC is a problem starting
my laptop does not start at the beginning when I press the power
1 hp logo comes up then
2 - a black screen appears "windows error recovery".
"Unable to start windows. A recent hardware or software change might be the cause.
When I clicked on 'launch facility repair' it takes hours (kept for 8 hours, still nothing happen)
3. then he ran the starting test
It showed an error "short DST: FAILED.
FAILURE ID: RLQ55G-5B46MH-9XL03F-60UR03
Hard drive: 1
Laptop model: HP G62 Notebook PC
Product number: XT874EA #ABU
OS: windows 7
PLEASE HELP ME AS SOON AS YOU CAN YOU PLEASE
Hello
No problem
Your computer is listed as coming with a 500 GB hard drive, but you can also easily install a 750 GB HARD drive if you want a little more space - readers at the following links are examples that would be perfect for your laptop.
The procedure to replace the hard drive begins on Page 52 of your & Maintenance Guide.
Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.
If you do not have your recovery discs, you can order a replacement set using the link below.
If you have a problem with this link, order them directly from HP.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
Best regards
DP - K
-
HP G62 Notebook PC blocking to the Welcome screen
1 HP G62 Notebook PC XZ259UA #ABA
2. Windows 7 64 bit
3. cannot cross the home without locking system screen to the top. Ran a start-up test and the flat hard 1 failed. Failure error was 90F16K-5HJ64H-XD003A-60XP03.
4. no changes to the system before the error occurred. Has used an HDMI cable for the first time recently however.
Do I need to include other information?
Thank you very much.
I also can not without failure or anything else.
Hello
The player at the link below is an example of one that would be perfect for your laptop.
The procedure to replace the hard drive begins on Page 47 of your & Maintenance Guide.
Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.
If you do not have your recovery discs, you can order a replacement set using the link below.
http://support.HP.com/us-en/document/c00810334
If you have a problem with this link, order them directly from HP.
If you live in the United States, contact HP here.
If you are in another part of the world, begin here.
Kind regards
DP - K
-
Computer HP laptop crashing after boot up on G62 Notebook
Hi, I have problems with my laptop computer lately its been run very slowly and last night it froze completely. Hoping I could get some help here.
Product: HP G62 Notebook PC WQ848UA #ABA
OS: Windows 7 64-bit
Hard drive 1 error
Failure ID:0XJFUF - 54 M 645-XD003G-60RM03
Hello
Please find the link given below check Chapter 4 withdrawal procedures and the replacement part number of the hard disk are also listed check page 46 will help out you.
-
How to make more old Hoyle and Broderband card games to work in mode full screen on my Sony notebook with Windows 7
Hi Gary,.
1. what version of Hoyle card games you try to play?
Try the game in compatibility mode. To install the software in compatibility mode
1 right click on the Setup file, and then selectProperties.
2. click on thecompatibility tab.
3. incompatibility mode, check the run this program in compatibility mode for: option.
4. Select one of the following operating systems:Windows 98/Me/XP/2000 , from the options offered.
5. click onapply and OK.
See the link below for more information on compatibility mode:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsIf the problem is only with these games you may need to contact the manufacturer about this issue.
Bindu R - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
What processors are compatible with my g62 notebook?
What processors are compatible with my g62 notebook?
Product number: WY881EA #ABU
currently have a processor intel pentium p6000 1.87 GHz
I was trapped and bought a game that requires a 2.0 GHz processor and I really want to be able to play
Please check back soon.
Thank you
Hello
Compatible processors for your laptop (and the replacement procedure) is detailed on Page 81 of your & Maintenance Guide.
Given the speed of your current processor, it would look like the first four are Ok - I always recommend to check this with HP first before buying.
Kind regards
DP - K
-
keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium
keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium. I received once posted this question, an answer of "fix" to a thread that has worked. Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything. Could someone please re - send the wire? I promise you that I'm deleting it this time.
Thank you very much
E-mail address is removed from the privacy *.
Hi RICH0214,
Follow these methods.
Method 1: Follow the steps in the article.
Device Manager does not display devices that are not connected to the Windows XP-based computer
http://support.Microsoft.com/kb/315539 (applies to Windows Vista)
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 3: Create a new user account.
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
HP G62 nOTEBOOK 144DX: driver for keyboard filter HP G62 Notebook 144DX
On the Control Panel, there is a yellow triangle with a black vertical line through it next to my HP G62 Notebook 144DX. When I right click on it, I get the message "Keyboard Filter is not a pilot. How can I get this driver for keyboard filter?
Hello
Download and install HP Quick launch on the following link buttons.
http://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe
Kind regards
DP - K
-
Pavilion g7-1365dx notebook pc, windows 7, rebooted itself
Pavilion g7-1365dx notebook pc, windows 7, restarted itself without apparent reason (both terrible!). There was no place or by downloading or anything else to precipitate a reboot. How tp prevent in the future?
Hello
Please find the steps below may help you solve your problem.
Click Start, then control panel. click on system and security link. Click on the System link. In the left pane, click Advanced system settings locate near the bottom of the window and click settings in the Startup and recovery section. In the startup and recovery window, find and uncheck the checkbox next to automatically restart. Click OK in the startup and recovery window. Click OK in the System Properties window.
Let us know how it goes!
* Although I am an employee of HP, I speak for myself and not for HP.
Click the White Star Kudos to say thank you *.
Please check accept as Solution if it solves your problem *.
Concerning
Maton
Maybe you are looking for
-
In windows 7, which was on my BOOTCAMP, I used the disk to shrink drive "C:\" management ", and then creating a score more. It caused the failure of startup of WINDOWS and MAC OS! Unfortunately, even when I used Internet recovery and then disk utilit
-
Qosmio F30-140 - no noise on TV tuner
Try to set up my computer to watch TV through my internal TV tuner, I managed to set up the image, but never got her. I am running XP SP3 and using K! TV and DScaler.Tried also to other programs with the same result. Any ideas?
-
HMI using several VI´s
Hello. I'm starting to use Labview HMI, but I'm not exactly sure how do. I would build about 4 screens to navigate. I read that I could use the tab control, but when I tried, only the selected tab was working properly - other data loss. My applicatio
-
Scan interval for the automatic selection of the channel?
E2500 or this mater no matter what wireless router - what is the interval between scans of the network to maintain the router on the best channel when it is configured to automatically choose the channel? Is there such an interval? Or he analyzes net
-
Problem with onNavigateToTransitionEnded
I use the NavigationPane navigateTo function to return to a certain page. To clean up pages in the meantime, I use onNavigateToTransitionEnded: onNavigateToTransitionEnded: { console.log("onNavigateToTransitionEnded"); console.log("pages: "+pages) fo