failed partitions!

Similar Questions

• Upgrade fails "/" partition requires at least 3048 MB

  For the moment to have a problem with 4 guests when you try to perform an upgrade. I get the error of reading "/" partition requires that at least 3048 MB my root partition is 5 GB with 3.5 GB free. There is a local VMFS on each host anywhere between 300 GB free on the single host to 300 GB free on another. The hosts are DL380 G5 with p400 RAID controllers and the local disks of SAS, I'm upgrading from ESX 3.5 update 1, tried to update manager and the host update utility, call is connected with VMware support, but not getting very far.

  All ideas, will have to bite the bullet and rebuild with vSphere nihilo tomorrow, but would prefer to know the cause and fix, also concerned I'll end up in a similar condition after blowing the partitions and trying to install vsphere.

  See you soon

  www.virtualisedreality.com | www.Twitter.com/virtualisedreal

• Impossible to update controller firmware lifecycle

  Hello

  I can't update the controller of life cycle of the package of Aoo Version 1.1.0.188 to version 1.5.5.27 (life cycle - Controller_Application_6V5JC_WN32_1.5.5.27_A00.) (EXE) using Open Essentials to manage, but it fails.  Error as follows:

  Execution status:

  The update failed: failed Partition - delete the Dynamic Partition failed

  ===> Update result<>

  Update has not been applied.

  Server has been restarted and all other updates applied, but the same error is received.  Does anyone have any ideas, it may be the cause?

  Kind regards

  Try this:

  From a command line, type racadm racreset

  After the command finishes running, shut down the server, pull out the power cord and drain the power off of the server.

  Then reconnect, start it and try to re-run the update.

  Kind regards

• Remove partition Bootcamp failed

  Hey, I tried to remove my windows via bootcamp partition, but it failed in the process. Now this partition seems to be lost. I tried to reboot into recovery mode and see if the partition appears in disk utilities - but it's not... Does anyone have an idea how to find it and add it to my os x partition?

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 214.4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 214,0 disk1

  Logical volume on disk0s2

  0A7898A0-C449-4FDA-84EB-BF87D0A7692B

  Unlocked encrypted

  Cs diskutil list

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 29C3E7B1-1279-479E-8719-A33535D4C033

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 214361235456 B (214,4 GB)

  Free space: 8970240 B (9.0 MB)

  |

  +-Physical volume 123BAA17-BB24-40C9-96C9-87CFC2610174

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 214361235456 B (214,4 GB)

  |

  +--> Logical volume family 23CD0BAB-DE8E-447C-91DC-C1B56841CD86

  ----------------------------------------------------------

  Type of encryption: AES - XTS

  Encryption status: unlocked

  The conversion status: complete

  High level queries: secure

  |                        Password required

  |                        Accepts new users

  |                        A visible users

  |                        At the Volume key

  |

  +--> Logical volume 0A7898A0-C449-4FDA-84EB-BF87D0A7692B

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 213999943680 B (214.0 GB)

  Reversible: Yes (unlock and decryption required)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  TPG - r sudo show/dev/disk0

  Password:

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 418674288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  419083928 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  420353464 69881255

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  The easiest method is a Time Machine backup/delete/restore as described in Re: doesn't have windows via bootcamp 8.1 installation .

  If you want to try to use the commands from the Terminal, let me know.

• P850 satellite - failure with the recovery partition - boot selection failed

  Hello Hello,

  My problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :
  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language setting and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact the manufacturer administratos or your system's computer.

  Status: 0xc000000e

  Info: the boot selection failed because a required device is not accessible.

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not me, work, when I go to see the Recovery Console:
  * Startup Repair
  * System restore
  * Restore
  * Tool of Diagnoctic memory of Windows
  * Command line

  Hello Hello, my problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :

  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem: *.

  1. Insert your windows installation disc and restart your computer

  2. choose your language setting and then click "next". *

  3. click on "Repair your computer." *

  If you do not have this disk, contact the manufacturer of your system administratos or computer for assistance.*

  Status: 0xc000000e *.
  Info: the boot selection failed because a required device is inaccessible.*

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not my work.

  Recovery Console has these options:
  option 1: Startup Repair.
  Option 2: System Restore.
  Option 3: image retrieval system.
  Option 4: Windows Memory Diagnostic.
  Option 5: command prompt

• Toshiba Recovery - Partition creation failed on Satelite P200

  I have a * Toshiba Satelite P200 *.

  Norton has expired recently, within hours of the expiry I seemed to have a Trojan horse. I think it is W32/IRCbot.worm (his supposition a little!) because it seems to be popping up again.
  It also caused my computer to restart, as in the description of viruses.

  I had tried recovery and recovery disks but received this error initializing the partition has been:
  * ERROR: 08-0E89-000 *.
  Failed to create the partition.

  I then tried a full erase with the TOSHIBA recovery disks, it took hours 18 or more, but ended up with the same error message as above.

  I do not have data importiant (transferred all externally) and I'd like to start over again. I'd love you long if all-in-one could suggest anything.

  To make clean OS install with media recovery is not a problem, and you can't do anything wrong. I recommend you do the little test and install the operating system without creating any partition. Start the recovery procedure, choose the language and simply continue without using the SETUP button.

  Please can report you if the recovery procedure completes successfully?

  To be honest, if you can't install the OS via recovery DVD disc there is not much to do and you need to clarify this with the service provider authorized in your country. Either they will test with other discs or experiment with new HARD drive. I don't see any other solution here.

• D1G64UA: Windows 10 update fails due to no space in the recovery Partition

  Try to upgrade Windows to Windows 10 8.1 upgrade fails due to insufficient space in the recovery on the D: drive Partition

  The size of the recovery Partition is configured at installation of the HP factory and it leaves only about 3 GB, which is insufficient for the upgrade of Windows 10 start the upgrade begins by creating files in the recovery Partition.

  I don't want to remove the Windows 8.1 recovery files that already exist on the D: Partition of Recovery of the construction of the plant and in fact, I don't think that the o/s will allow me to delete these files from recovery.

  Any help in how to run the upgrade of Windows 10 is appreciated.

  Glad to see that my post has solved your problem.

  Please click "Accept as Solution" to my post so that others will see that this thread has been resolved.

  Thank you

• Satellite M305D-S4830: error recovery - Partition creation failed

  Computer: PC Toshiba laptop
  Model: Satellite M305D-S4830

  Problem: Originally windows wouldn't start; so I decided I would try reformatting it to solve the problem.
  First of all, I erased the hard disk; now, I'm trying to use the "TOSHIBA Recovery Wizard" provided with the laptop for reinstalling the operating system, but end up getting the following:

  "ERROR: 08 - 0 74-0000.
  Failed to create partition. »

  p.s. I've tried formatting using the command prompt, but it says format failed after choosing a volume name.

  p.s. #2 when I run the Startup Repair tool, I get the error that the volume is corrupt

  I noticed there is a hidden partition called X: where there is a backup of the operating system out-of-box, but have no idea how I could use this backup to possibly restore windows...

  What should I do?

  I think the problem is the partition on your HARD drive.
  You said erase the hard drive, well, this might be the reason why the recovery is not working as it should.

  In my opinion full HARD drive must be formatted again (all partitions must be removed and formatted too.).
  Perhaps you could use an original disc of Microsoft (Win XP CD) to format the HARD drive and you can then use the Toshiba Recovery disk to recover the laptop again!

• Bootcamp partition unusable after the failed kidnapping attempt

  Hi, I'm having a problem with my Imac, for reference, it is a model of 2013 with an Intel i5, 32 GB of ram and a 250 GB ssd.  I got it initially setup with a partition boot camp of 100 GB running windows 7 but windows encountered problems and wouldn't start.  I used the boot camp assistant to delete the partition, but after being run for awhile it has failed, and when I looked at the disk utility, is more showed the boot camp partition and only recognizes the 100 GB of space.  Now I have a 156 gb hd mac.  I saved my partition mac with time machine with the intention of all of the disk formatting and reinstalling Mac OS but from the start in my installation key USB, disk utility says it can not access the part of the fuser unit and looks like he lets me only format my mac of 156 gb partition.  I'm stuck and I would be grateful of any advice to recover my hard drive!

  Thank you

  Just to clarify, you have an SSD or a disc Fusion? You seem to indicate both.

• Boot Camp install fails: cannot create the partition

  512SSD i7 MacBook Pro late 2013

  Boot Camp Assistant 6.0

  O/S 10.11.2

  true (paid for!) Windows 10 home

  Create USB boot exactly according to the instructions of the Boot Camp Assistant (time consuming)

  Re-partition Mac SSD in Colombia-British Deputy with 60 GB for windows partition

  Restart the system and boot of Windows Setup

  Enter the key to victory, everything works fine

  When you choose which partition to install windows, select 60 GB

  Installer of Win said partition is not formatted correctly, so I use the formatting tool in the installer

  Formatting tool seems to work but removes the volume name: it was Boot Camp and becomes Untitled

  60 GB re partition - select an installer says "failed to create the partition" or something similar

  Installer refuses to go forward and the only way out is to leave the Setup program

  Mac to Mac o/s boots

  Tried a couple of times and always the same result.

  Someone has an idea what I am doing wrong? I'm just following the instructions of the Boot Camp Assistant...

  This is the case, if you have any other than the USB storage and storage internal connected.

• space missing after the process of partitioning failed. I lost 500 GB and can not get it back.

  Hi, space on my hard drive disappeared after the process of partitioning failed. I interrupted the process, and after my boot drive lost 500 GB that I wanted to use it to boot camp. Now I can't get it back. Used diskutil resize the volume, but get the error message about the wrong size on cs and advice to make any repair. : Basic storage logical volume supplied has an incorrect size. You must run repair disc-set

  Help, please.

  pavadebo wrote:

  Hi, space on my hard drive disappeared after the process of partitioning failed. I interrupted the process, and after my boot drive lost 500 GB that I wanted to use it to boot camp. Now I can't get it back. Used diskutil resize the volume, but get the error message about the wrong size on cs and advice to make any repair. : Basic storage logical volume supplied has an incorrect size. You must run repair disc-set

  The message is correct. Start Internet recovery (command + Opt + R during startup) and click on utilities-> disk utility, click on the outermost disk and click first aid or repair.

• Hard drive with recovery partition failed, how do I restore Windows on the new drive?

  How can I get my sons pc working again?

  Hard drive failed and restore vista on a partition on the disk.  No backups.  Replaced the hard drive but obviously not Vista.  I have the genuine key.  Can I download the trial or something then activate with the existing key?

  Contact the manufacturer. They should provide you with recovery disks.

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!

• Install Windows 8 fails: too partitions

  Hello

  I have a hp pavilion with windows 7 Home Premium, 64-bit g6.

  I also downloaded the preview release of Windows 8 (consumer) and tried to install it in dual-boot.

  So I tried to make a new partition on my hard drive, but since there are already 4 primary partitions, the operation failed.

  (partitions: RECOVERY, SYSTEM, HP_TOOLS, and 'C')

  How can I install Windows 8, now?

  Can I delete a partition (as, for example, RECOVERY: I did a system repair disc and stored a file system image on an external hard drive)
  ?

  Or can I remove a (HP_TOOLS?), a logical partition and store Win8 and deleted in that partition?

  answer please!

  Sorry for the above answer. Hyperlinks do not appear to work today on the forum. Link to Dan guide is here: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-pre-loaded-Windows-7/td-p/742019

• Upgrade to 10.5 fails - not enough disk space in common Partition - db_hist using more space

  Hi all

  Tried upgrading our 9.0 (2) UCCX SU1 HA deployment 10.5 (1) last night and it failed with the following message.

  There is not enough disk space in the common partition to perform the upgrade. Please use the platform command line Interface or the tracking tool in time real (RTMT) of free space on the common partition.

  RTMT reported common disk space used as 94%. RTMT using we put the LogPartitionHighWaterMarkExceeded at 55% and waited for the disk space free. No luck.

  A bit more investigation and it turns out there is a database called db_hist_dbs in the common partition which is 33 GB in size. This is the command and returned the output that we used to find this point.

  See the common diskusage

  8.0 K/common/Ministry of health

  33G/common/var-uccx/CBD/db_hist_dbs

  1.6 G/common/var-uccx/CBD/temp_uccx_dbs

  201M/common/var-uccx/CBD/uccx_er_dbs

  1.6 G/common/var-uccx/CBD/uccx_ersb_dbs

  37G/common/var-uccx/dbc

  37G/common/var-uccx

  /Common/ontape_backup.gz 16 M

  8.0 K/common/cancel_upgrade

  Using this command - show uccx dbserver disc - we can see that the db_hist database file is actually 80% free! Output of the command here-

  SNO. TOTAL SIZE (MB) OF NAME OF DATABASE SIZE (MB) USED THE FREE SIZE (MB) TO ONE HUNDRED FREE

  ---- ------------------ --------------- -------------- -------------- ------------

  4 db_hist 34508,6 6836.9 27671,7 80%

  Anyone have any ideas on how to reduce the file size of the database in question? Is it still possible? Or what are our options to work around this problem and perform the upgrade.

  Thanks in advance

  Jeff

  You run in this bug: CSCul18667

  Symptom:
  Log purge CUIC is not clean file JMX. Upgrade may fail for lack of space.
  "show status" command s show that logging consumes 99% of space

  Workaround solution:
  Can remove by going to RTMT-> central tracking log & -> remote browse-> nodes-> 'specific node'-> UCCX-> Cisco Unified Intelligence Center Servicability Service-> jmx-> select all-> Delete