Freezing point

Similar Questions

• NB200 - freezing point arbitrary during any installation of OS

  Hello.

  When I just got NB200 out of the box and began to start the first thing that was the case, was hanged on the XP splash screen before any options. After 15 minutes I reset it and it got a few steps in XP installs where it installs programs. then he kept something with furniture of mouse cursor still for > 1 hr, finally I turned he walks and went up in broken XP situation.
  I use combo reset factory of manul (hold 0, start) but it does not then how do I do it factory reset?

  Now, when I try to install Win7 from a point-to-point arbitrary flash drive (sometimes even before showing the first Setup screen on green looping animation of progress, sometimes when filling out the list of partition, sometimes during the "expanding windows files", sometimes all in "installation", after a reboot) it would be to stop doing whatever it is. Cursor of the mouse is mobile and even, no ceases to animation loop, but there is no activity of HD, no fan activity (i.e. no high CPU load?) and if it "freezes" like than to expand our files, USB key will stop blinking what he does when he's actually progress,

  Interesting that for example it has spent 20 minutes on the extraction of 84% of the files once. While during installation when it is the 'end', it extracted the files very quickly, so I guess this isn't a problem at any time and it is just random.

  How can I fix it?
  Should I ship to Toshiba for repair or replacement (I'm going on vacation so unlikely to be able to use the replacement store in time).

  Hello

  On reset to factory settings, you will find all the information in the user manual.
  This means that if it is not possible to use HARD drive recovery option, you will need to use the Toshiba recovery disc but I guess you don't l t s create, is that correct?
  If not and you want to return to factory settings you need to order a new drive of Toshiba Recovery directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Depending on your problem with Windows 7 I put t know what could be the reason but it's maybe s material hard work because the XP installation didn't complete successfully. So for me it sounds like that it of not a software problem.

  To be honest in your case, I'd go for the authorized service provider nearest. Technicians can check your laptop and determine if it s a hardware or software problem.
  I guess that your laptop is still under warranty, the repair should be free.

  Good luck, buddy! :)

  Welcome them

• EliteBook 840 G2: Elitebook 840 G2 screen freezing Point

  Videos are not, but its is issued, unless you keep the mouse pointer movement (then it will display the video. Web pages also freeze, you can't scroll down unless the mouse pointer is moved. All this tends to happen when running on the battery.

  Not sure if anyone really cares, but the hardware acceleration IE solution helped some, but only on online videos. Videos played directly from the PC as video WMV Windows media player has always had problems with freezing. If anyone is curious, I finally solved the problem by opting for an Aero theme, then back to the original theme. The only thing that I noticed the change is the basic colors Windwos. Who should not have been laid down that way anyway. I already have an aero theme, but the colors were always fundamental. Make this change to solve all the problems. Don't even have to check the acceleration option in IE either.

• Freezing point of Skype computer

  Recently updated to Skype and now whenever I am in a call/start one, Skype freezes and also freezes my computer. How can I solve this problem?

  You don't have any physical webcam connected to your computer. Virtual Dxtory and XSplitBroadcaster Video Capture applications are likely to conflict with recent versions of Skype. Try disabling these applications.

  Alternative is to disable the video input in Skype by editing the shared.xml file:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-uses-DVB-T-card-as-camera/m-p/1445497#M12...

• Freezing point more of SanDisk SSD drive

  I put a 120 GB Sandisk more SSD in my old laptop, and it now has a problem where it spontaneously freezes for a minute and then working again normally. No error appears in the log when this happens. I upgraded to Windows 10 (starting from Windows 7) and it is always the case.  Actually, it happens much more frequently with Windows 10 he did with Windows 7.  I never had this problem with the original HARD, or with a Samsung SSD Evo drive, so I'm pretty sure that Sandisk is the culprit.

  I installed the Sandisk Dashboard, and it shows no problem with the SSD drive.  Firmware is up to date.

  The material is a Compaq C502US computer with processor Core 2 Duo and Intel 945 Express chipset.

  Thanks for solutions or troubleshooting assistance.

  Hi mc510,.

  My first suggestion is to turn HIPM on your PC, power management can sometimes cause symptoms as you described.

  If you still experience this issue, or if you want to know how to disable HIPM, please contact our support center for more information.

• my hp pavilion dv6 office freezing point

  Hello
  When I start it up, it takes longer to come on the desktop but at the office, it freezes and the Dungeon of cursor circling, no icons appear on desktop

  Thank you

  Hello

  The product is XE032EA #ABU
  model 3130sa, I have another hp nc6400 I can get HD and put it in this one. It has win 7, I barely use this laptop.

  Thank you very much

• BlackBerry Smartphones Blackberry 9360 with clock freezing point Curve every few minutes?

  Hiya,

  I have this problem with my BB C 9360. It does this when I have NO background running application except the ubiquitous five - BBM, MSG, calls browser (do not use!, but it is just there still-_-) and home. There is no white behind the clock widget screen, but sometimes, when she disappears a white creen flashes, like, a second and then my BB starts frantically trying to do things, he was invited to before freezing - it's frustrating and I'm worried - it is barely 2 months old!

  I looked through forums and other things and everyone says its cos of the apps but I have 1 single extra application on my bb and I actually removed 2 apps it is came with; PPL say it's because of the memory full, but I only have about 300 songs and 100 photos on a 16 MB Memory Card o___O

  He started last week and gradually started from 1 - 2 times per day for 1-2 times every 5 MINUTES this morning, while I was trying to delete some MSG and using bbm surveys

  HELP I don't know what the problem with it...

  in the browser options = clear the Cache, clear the cache in all the other apps that have a cache, also on the home screen press and hold the ALT key and press LG LG then optiions clear log. should accelerate and stop the gel as well

• BlackBerry Smartphones freezing point and go slowly - do I just a media card?

  I have new Bold 9790 and if I put more than a few apps on it freezes all the time or I get a clock icon and it takes forever to do anything. I just need to get a support card for more storage or I have a more serious problem?

  Thanks in advance.

  Susan

  Yes, I think you should have a sd card, I'm a little confussed why these 9790's do not come with an sd card. like most Blackberry, you need a memory card for saving all your photos and music on, also clear in the browser, facebook, twitter, bb maps and any other application that has a cache, the cache also on the home screen, hold the ALT key and press options then LG LG clear log, it will make your phone run more fast and more fluid

• HP Support Assistant on the restoration of these freezing points

  Model No.: p6-2133w

  NEW HP Windows 7 64 bit SP1, Microsoft Security Essentials Antivirus, already contacted HP support once on this issue, they had me re-download HP support assistant, restart, the program of restoration of the recovery area, but yet will accomplish a focus at all.   I'm an advanced user, but I like the ability to automatically update the drivers - since the new PC, and then I'm sure it's the right driver

  Tune-up just doesn't work at all, but I guess I can always do manual tunes ups and you worry, which I suppose

  Hello

  There are a few possible causes to do this, but first try the following and let me know if that helps at all.

  Unless you still have the latest installer for HPSA, download again from the link below and save it in your downloads folder.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  Then, download the Microsoft 'Fixit' on the link below and use it to uninstall the current version of HPSA on your PC.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Once done, restart the PC.

  Install the installer HPSA recorded do a right-click and selecting "run as Administrator".

  This makes all the difference?

  Kind regards

  DP - K

• Satellite L70 - B - Touchpad pointer freezing after upgrade to win 10

  After the upgrade to Windows 10, I get a problem intermittent freezing pointer touchpad.

  It emerges after a few seconds or by pressing the function Fn + 5 button, but it's not permanent cure.

  I downloaded all the patches available etc., but the problem persists. Did someone met a similar problem after W10 upgraded?

  Laptop: L70 - B Satellite
  GordonH

  Does always if you uninstall / remove the software/driver for the touchpad of programs & features?

• My computer laptop touch pad keeps freezing

  So I had this problem with my HP laptop for a while now. My mouse freezes randomly when I use my touch pad, make me have to close my laptop and open it again to my touch pad start labor, it might sometimes take awhile to start to get back to work. Someone please tell me what to do this gets really annoying when I have to keep closing my laptop to get my touchpad to stop the freezing point.

  (P.S my mouse works fine when I plug in a mouse, so I know that my touchpad is the promblem here.)

  Hi Chanellex,

  Thank you very much for the product number. I hope you had a good weekend. I included the link to the driver for your TouchPad below. Start by making sure that the original driver is deleted. Go to your device manager and looking for your Synaptics TouchPad or something similar. Right click and uninstall. Then, install the link below. Please, note use this method if you have an external mouse, if you install just the software.

  Synaptics TouchPad Driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-88831-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 4308945 & sw_lang=.

  Thank you

• iTunes freezes for 30 minutes

  I know there have been various reports of iTunes to different freezing points, but I have not seen a solution for my particular problem.  I was hoping it will go away (I submitted a bug report, but I have not, nor I, a reply), but it seems that my problem is limited to just me... :))

  Whenever I connect an iOS device (iPhone 6 with iOS 9.2.x iPad 2 Air with iOS 9.2.x even an iPhone 4 with iOS 7 and 9.2.x), iTunes has the rotation for about 30 minutes beach ball.  After that, the device syncs properly.  While iTunes if frozen, however, I am still able to access pictures on the device using Photos or Capture of Image, so the device itself is not frozen.  Can I force quit iTunes apparently without additional problems.  If I can do something that seems to have access to the Internet (for example, achats purchases transfer, updated iOS, etc.), then iTunes will freeze again for about 30 minutes before doing what it is supposed to.  Everything seems to work, it's just this long delay which becomes really annoying.

  I don't remember exactly when it started, but I think it was last year or so.  As I said, I kept thinking it's a unique thing and that he would go with the next update of iTunes, but it didn't.  I tried to reset iTunes preferences, but that did nothing.  A new user and a bookstore empty iTunes caused the problem go away, but it's not really what I wanted to do.  Any suggestions for what I can try?

  When you see a beachball cursor, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Mac keeps freezing

  I have problems with my mac.

  He is not one of the newer, lighter, its quite heavy.

  Although there are problems with the writing drive I managed to get an external however if I'm working on something and

  have maybe 5 tabs open its freezing point.

  When I say freezing point, I don't see a wheel and I can move the mouse cursor but I can't interact with the mac using the mouse or the keyboard.

  I have absolutely no idea what could be the problem.

  It does not crash is if you are in the internet that is not not good for me.

  Any help would be appreciated.

  Run and view a report of EtreCheck so that we can have some http://etrecheck.com information

• The computer freeze

  the newspaper evet I have showing 1517. What SOEs this way. My computer keeps abdou and Ctrl + Alt + Delete does not work

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Can you do the system freezes when you want?  For example, you would say that there is no specific system activity that coincides with the freezing point (like watching videos, playing games, etc.).

  Windows XP has a built-in mechanism specially designed to help diagnose problems when your system crashes, crashes or stops responding.  This is the method to use if you want to understand with certainty what the problem is quickly and fix it instead of guess or try things.

  There are several events of 1517, you might have, so we need to know exactly what your says.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s. informational Messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove personal information from your information
  After having stuck if you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean that it is the "answer" to your situation, so read through all the ideas for the corresponding event to find the one that sounds more like your situation.

• Windows freeze/thaw when you surf the web

  Hello world

  I had a problem with my PC for some time now and it is really really annoying me.

  When you browse the web with Chrome or Firefox, it freezes for a few seconds (up to 10 at least) constantly then thaws again. If I watch a YouTube video, the picture often freezes for a few seconds but sound keeps going, then it goes back to normal.

  I can play games in 3D without any freezing point, I can use Office and other applications without any problem, it's just web browsing. I tested Internet Explorer as well, but only for a short period and so far have not been able to replicate.

  Initially, I thought it was a problem with Adobe Flash Player, so I uninstalled, rebooted and reinstalled. No change. I can often be on the pages of plain text with no Flash animation and still freezes when entering the URL or scroll to the bottom of the page. I use the HTML5 in Chrome for YouTube Player, so can not see how it can be Flash Player causing the gel.

  Below are the specs of my PC:

  Bicoeur AMD CPU (3.2 Ghz)

  16 GB of DDR3 memory

  Brand new Samsung Evo 120 GB SSD (my old Corsair died)

  1 x WD 500 GB HDD

  512MB Nvidia GeForce 9600GT (old, I know)

  Card mother Gigabyte, with the latest version of the BIOS

  DVD burner

  500W PSU

  I already re-installed a completely new copy of Windows 8 on my new SSD when the old man died, but the problem persists.

  I tried to unplug the DVD drive and the 500 GB HDD to rule them out, but it made no difference.

  I think out my video card and the transition to the car as a test video, but I don't know if this will help.

  The PC was built by myself about 3 years ago, but I'm a little out of ideas as to what could be the cause of this trouble on my PC at home.

  Anyone else have any suggestions? Could it be faulty memory?

  Looks like I solved this myself.

  When to remove my graphics card and turn on/off the PC, I got 3 beeps and no BIOS screen. I looked in my manual of the motherboard and it says error memory, so I removed and re-sitting all of my RAM.

  Tested the PC with only the embedded video, could not fault, so put my old 9600GT back in and everything works fine.

  Before I did this, I booted up a Linux Live USB distro, and I could reproduce the exact same gel I was getting in Windows, so I knew it must be a hardware problem.

  I'll run memtest86 later and make sure that my memory is not faulty.