Fried hard drive. All the Apps CC went.

Similar Questions

• Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

  Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

  Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

  I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

  First thing I did was a fast hard drive test and it happened.

  I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

  Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

  I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

  Thanks Bill

  Hello:

  See if you make your own plain W8 x 64 installation media works for you...

  Download the ISO W8...

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  It does not start to the top, screen and hardware ok except belt disconnected.

  also can I sell adapter, brand new, never used. where can I sell?

  Hi Wally, the hard disk OS X and all of your files. Get a case for your reader, and it backs up. Try OWC

  Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperor double clone.

  Try eBay for the adapter.

• How can I get all the files from the hard drive in the non-working Compaq Presario CQ62-411NR

  Ice tea seep keyboard laptop, and after drying it feeds on. If I try a hard reboot, it is stated that I would lose all the info in the memory and I can't afford to lose my mother pictures that are on the hard drive. Is it possible to get the hard drive to work in some other way so that I can get my photos and other files.

  You can remove the hard drive and put it in a USB Enclosure.Plug USB port, another machine, where you should be able to go through it and copy your photos off on the hard drive of the host computer.

  Example:

  http://www.TigerDirect.com/applications/SearchTools/item-details.asp?EdpNo=3743052 & catid = 2783

• How to copy a folder to an external hard drive with the same file on it and have it just add new files instead of replace all old already on there, as well as to add new?

  I want to copy a folder to an external hard drive with the file already on it and not having to replace all the files each time. I just want to click and drag the folder to the external hard drive and have it add new files I've added in the folder on my pc over time on the external hard drive. It's annoying to have to replace alllll the files each time.

  Thank you!

  A simple way is to use the second copy of Centered.com software. It is reasonably priced and will do exactly what you want. MS - MVP - Elephant Boy computers - don't panic!

• Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

  Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

  Hi Uri,

  Please click on the link below and contact the Adobe Support via chat.

  Contact the customer service

  Hope this will help you.

  Kind regards

  Hervé Khare

• W510: How do I access my data from a failed hard drive after the failure of the motherboard

  I made a mistake and has paid for major .

  This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.

  Symptoms: It began at the start, kept a beep, sometime just close and will start.

  In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:

  -Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what

  -buy an equivalent model laptop and put the HARD drive in there

  -by an external SATA hard drive enclosure and mount it via USB on another computer

  I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.

  I'll appreciate any suggestions for accessing my data.

  Best regards!

  All,

  Thanks for the suggestions.

  I was able to recover my computer and all data on it.

  Just to describe what I have done, here are the details.

  Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.

  Thanks again,

  brent86

• External hard drive in the Device Manager but not in disk management

  So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.

  Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.

  I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.

  I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.

  I tried several cords and all my USB ports with no luck either.

  I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.

  So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.

  Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.

  There are recovery/repair partition about tools.  Western Digital actually have some but I think that they are made for internal drives.

  If I were you, I start with WD and start looking for partition recovery/repair tools.  If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.

  If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!

  Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)

• internal hard drives within the switching apparatus

  Switching of the internal hard drives in the machine. I have two internal hard drives, C and E of clarification and I replaced my C Seagate 360 with a TB Western Digital because of this hard disk failure false I bought, which I'm sure were a corporate scam to buy more stuff that is really unnecessary. My question is "how to pass these. My HP Pavilion Elite m9150f going in stupid mode on 3 to 5 times a year and I have to do a recovery and I found that doing the hard, it is happening in stupid mode in a very short time. I found is from the CD that it takes a little more, but the best way is to erase completely and reformat the hard drive and then do a clean install, so he prevents her from stupid mode for awhile, this one lasted 4 months but like you have probably understood it's time to do it again. However, as you know it takes 3 times as long to reformat TB as it does a 360 GB drive, so it's the root of my question. I have all my stuff on the E-Drive SG360 for backup, note here backup on this PC has never worked so I don't bother with the so-called machines back to top I just copy stuff I want to record on the E drive and make the ol' copy ' and paste to restore everything. Now because of the time it takes to reformat drive C TB I want to make the switch. Is it as simple as just their switching and pulling the PC with the recovery discs factory to perform RECOVERY and do my usual copy and paste of the Western Digital to now, E-Drive?

  Please someone with the know let me know

  Thank you very much, RickS

  Aparently, you can not RESPOND to your own message.

  No one answered so I went ahead and did it. Lost all learned but a lot on the partitioning of hard disks and all together, in addition to becoming the hard drive back to R & R until less than 6 minutes time to unplug the PC at the rear, turn 05:53, my best so far. but she is back to being usable was a day and a half.

  The answer to the question is when you put that there is nothing usable at all because the PC looking for the OS and boot any disk has. I had to start player, I chose so that I could erase and reformat the C drive and run the installation of the OS. Once he was done with that I had to choose again which drive start so I could erase and reformat the drive E then he would leave goes to the starting window when I turned it on.

  Simple answer is not a. Read above.

  RickS

  PS: I hope this helps someone.

  Hello

  Check with HP to factory reset of related problems.

  All the best Ricks!

• Possible to recover files on an old hard drive using the new computer?

  Hi, my old computer CPU fried making UN usable. I just bought a custom P6150t of hp and I was wondering if there is some way I can install the old Hard drive in the computer I just bought. I really want to stay away from the team of geek or something that's going to cost me a lot of money. Any suggestions?

  It is certainly possible, in fact, it should be fairly simple how experienced you are with computers. Hand, you have a few options I can think. Was of course since I am not aware of what kind of hard drive in your old computer, you will probably need to buy an additional cable\cord\connector to connect to the motherboard, and if it is an old IDE drive, you can buy an IDE to SATA as one of them.

  This is all assuming you want to keep the hard drive installed on the PC. And although it may sound intimidating or difficult to do, it's really not! If you can put some screws with a screwdriver, you will be able to install the old drive if your new PC. Simply enter the model number of your PC to the HP drivers & support web page or click on the following link: upgrade and repair, (this is for the model number you provided) read the first couple pages & then proceed to PDF page #17. Read & review the instructions once in a relationship, print out the instructions if necessary, collect tools (flat head screwdriver & anti-static bracelet), then just follow instructions & take your time paying attention to the illustrations. It is frankly less work & easier than typing all of this out.

  Either way, you can easily connect to your computer must use one of these: existingUSB-adapters IDE that allows you to directly access a device of ATA/ATAPI IDE interface. Everything is a matter of preference and what you are comfortable doing.  To find these items I already mentioned, just google 'em and either find a computer store nearby and investigate with them or order from a decent distributor in your country for the best prices. Overall, there are many more options that I've listed here, but they are all relatively will do the same thing; that is the type of player, you must convert a USB cord. Hope this helps! Good luck!! -tmt-

  Message edited by tmt on 14/08/2009 05:04

• Visualization of images on external hard drive via Photos app

  Is it possible to view photos stored on an external hard drive through Photos app?  I want to use the slide show feature but don't want to import them on my mac every time I want to see photos of old (and consequently taken disk space).

  I just saw that when I import a picture in the Photos app, each image takes place twice the amount of space on my drive hard because it "copy of the original file.  Rather than using a reference library, which, according to other threads, is ill advised, I had to use an external hard drive for storing images instead.

  Photos is not a photo viewer - is a Photo Manager and deals only with photos that have been imported into its library - you can have your library on an external hard drive or a second library on an EHD or you can use a third party Slideshow software

  LN

• Can I add a hard drive on the U840T-108 Satellite?

  Hello
  I bought a Toshiba Satellite U840T-108 and I had not noticed that there was a 128 GB SSD drive. I would like to add 1 to or 500 GB Sata hard drive.
  Is this possible? T Y is the room in the computer?
  Thank you
  PS: I'm French so excuse me if I speak little English.

  I can see in paper manuals s user that your machine is not the cover of HARD drive on the lower side, so for an upgrade low cover has to be removed and it must be done by the only authorized service.
  If you try to do this alone you will lose warranty valid.

  In my opinion, you have to call the nearest provider of Toshiba in your country, explain the situation and ask for advice. Guaranteed valid is very important to not do something on your own.

  Either way, I think your machine has connector disk HARD vacuum placed near the ventilation of cooling. I m not 100% sure all of this, but you can check with the technicians.

• Qosmio G20 - XP doesn't see second HARD drive, but the BIOS is

  Hello

  Mylène for the long post - but think if give good info, I poss of correct answer:

  After the crash of QOSMIO G20... managed to reinstall of XP Recovery DVD-ROM. Immed after, looked at the config with Win Explorer and two hard drives all present and correct. even copied a picture of my images on the D: drive, just to make sure that all aok.

  Then downloaded SP3 and tried to install - it reported failure and then shut down the PC. After attempts to get again - until finally resorted to reuse the Recovery DVD-ROM.
  Come back XP again - but now, while the BIOS sees two hard drives (reports size, Fab details, etc.), as far as Windows is concerned, it does not exist.

  Tried to initialize in disk management - no sign there.
  He was then released, put it in a shopping cart, connected to the office and initialized and formatted - then returned to mobile... zilch!

  Your kind suggestions and recommendations could save just the remaining strands terrified of hair of a violent end...

  A lot of TIA
  Logis

  Hello House,

  Normally, if the BIOS recognizes the HARD drive, but not Windows, this means that the HARD disk is not formatted, but it must be visible under the Windows disk management.
  You see it now?

  If not it is not easy to say what the reason are you should try load default settings in the BIOS and save it. Then start Windows and check if HDD is visible there too.

  In the worst case, it s that a malfunction of the HARD disk controller, but what you can test if swap you the two drives and put them in another location.

• Can I add a second hard drive on the Qosmio X 500-12 q?

  Hello
  I would like to know if its possible to add a second hard drive to the X 500-12 q?
  I suppose that space is available, but I would like to know whether the connector is here & all
  I could just open the case and plug it in.

  Thank you

  In the document s user manuals I have not found something on HD upgrade so I m really don't know if this will be possible.
  Anyway, as Jeka wrote, remove the HARD drive cover and check if there is place for second HARD drive and also necessary SATA connector.

  I have older 300 x and there is room for two drives.