HP driver will not install. OfficeJet 4500 G510 n. z. Windows 7 64-bit.

Similar Questions

• Complete National Geographic library 1998 will not install on my laptop Toshiba with Windows 7 32-bit

  I tried using the troubleshooting and compatibility. Without success. It allows to run on my desk that I did more. He was runing Windows XP service pak 2 and this is what Windows 7 has tried without success. 16-bit program is possible to install on this computer?

  I tried using the troubleshooting and compatibility. Without success. It allows to run on my desk that I did more. He was runing Windows XP service pak 2 and this is what Windows 7 has tried without success. 16-bit program is possible to install on this computer?

  Probably not.  The compatibility issue is one that you need to ask those who have created the application and not Microsoft.

  You may be able to run inside a virtual machine.

• USB 3.0 AMD host controller driver will not install.

  The USB 3.0 AMD host controller driver will not install.  He would then set I uninstalled assuming that Windows would be updated and reinstall.  Now it will not reinstall.

  Any ideas?

  Hi Felix,.
  Thanks for the reply.

   
  Have you tried the methods suggested earlier?
   
  Refer to issues related to the printer:
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Download and install the latest drivers for your printer from the manufacturer's website.
  http://support.Lexmark.com/index?page=answers&startover=y&locale=en&UserLocale=en_US&question=Lexmark+S410#2
   
  I hope this helps.

• I have a kodak esp6150 printer, try to install on an asus laptop k601j running windows 7. driver will not install keeps giving an error.

  driver will not install keeps giving an error.  Kodak has been in the computer for 2 hours and could not resolve the matter still to come with the driver installation error. They said that its operating system issue or number of laptop manufacturer.  installs fine on other computers in the House. for any help or suggestion would be appreciated.

  Try to download and install the latest drivers for Kodak for the ESP 6150:
  http://support.en.kodak.com/app/answers/detail/A_ID/17138/selected/true

  Installation instructions

  1. Check that your computer meets the system requirements.
     NOTE: WINDOWS XP 64 - bit Operating System only is not supported.
  2. Disconnect your all-in-one printer from your computer.
  3. Make sure you have connected to the computer using the administrator account.
  4. Close all programs.
  5. Download the software on your computer.
  6. Double-click the *.exe file, and then follow the on-screen instructions.
  7. Once the installation is completed, connect your all-in one to your computer.
  8. Select Start > programs > Kodak > Kodak AiO Home Center.

  Troubleshooting of the printer:

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

• my computer will not install the update of security for Windows XP (KB2481109)

  Moderator before go Note: IE8.
  -----

  my computer will not install the update of security for Windows XP (KB2481109) can you help me.

  Hello

  (a) don't you try to install the update manually?

  (b) you get any error message?

  (c) don't you make changes to the computer until the problem occurred?

  (d) what anti-virus software is installed on your computer?

  I suggest you try the steps below and check if it helps

  Method 1:

  If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs

  Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.

  Method 2:

  I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:

  http://support.Microsoft.com/kb/310353

  Make sure that return you the computer to a normal startup mode once it's done.

  Additional information: make reference in the link below:

  http://support.Microsoft.com/kb/2481109

  Hope this information is useful.

• Satellite U300 - 13K usb 2.0 camera Chicony driver will not install on vista 32

  My Toshiba satellite u300 - 13 k has windows vista Home premium 32-bit. I can't install * driver chicony usb 2.0 camera is not install *. I get the error "Windows has encountered a problem installing the software driver for your device." Required section was not found in the INF.* Please help...

  Hello

  Hmm never saw this error message during the installation of the webcam driver.
  Have you downloaded the package again and you uncompress it before installing?

  Please also check out webcam software other models of laptops as Satellite U400

• printer driver will not install in windows xp

  Just bought a wireless printer.  laptop with windows 7 rapid implementation.  desktop with windows xp service pack 3 will not load the print driver.  Says I don't have permission.  I am the administrator, but somehow I do not have the rights to add this printer.  Brother was no help.  Said it was a computer problem.  Someone has an idea?

  Hello james Petersen,.

  Look at the page of brothers of the drivers for your Windows XP system
  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_index.html?reg=us&c=us&lang=en&prod=mfcj6710dw_all&dlid=&flang=English&OS=7&type2=-1

  There is also an update of the firmware, you may need to install.

  I'm moving your message in the hardware category for best support.

  Thank you

• My HP Photosmart C309g printer driver will not install on my laptop.

  I am running Windows 7 64 bit. When I try to install the driver for my printer C309g (pilot of the basic functionality or complete) installation hangs during the first phase. Actually, the installation closes and disappears without any error message or explanation. When I tried to use the installation of HP software, he kept just the driver download and try to install it again and again.

  I tried the fixes on this site: http://support.hp.com/us-en/document/c00836418 I turned off finish it and stay programs and disabled the firewall.

  The most frustrating is that the computer can print a test page for the HP diagnostic tool and other computers and my iPad will be printed (using eprint on the iPad), but I really need THIS computer to print.

  Hello klucot.

  During the first phases of installation, there are a screen that allows you to configure your Internet options, which allows you to choose if you want to find the driver updates before you install the driver or not. Select that you do not want to search for updates and installation will pass.

  See you soon!

• WiFi card driver will not install for dv6 11nr 6 c

  then I tried to install from Device Manager, on the site of hp on the realtek site, on the site of ralink and nothing. I don't know even what adapter I have because all this says is "network controller". When I try to install it from the Device Manager it does nothing. When I try to install the downloaded drivers, he did his thing then said that it has not installed correctly, and it will keep saying that.  Maybe it's bad drivers?

  Thank you!

  Hello:

  According to the list of parts for your model, it has a PCIe adapter half minicards (HMC) WiFi Realtek 8188GN.

  The driver you need is not on the page support and driver for your model, which is why you are struggling to find the right driver for the wireless card.

  Therefore, you need the driver for this card:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_105197_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• network controller driver will not install on pavilion dv7-6c20us

  After a new installation of Windows 7 64 bit, I was passing by and install all the drivers.  I can't get WiFi to work, it says the pilot "cannot properly installed.»  The wired LAN Controller and all other drivers seem to install, very good, but not wireless.  (I've tried a few)

  Also, I went into the BIOS (which I've read here to try) to disable the saving of LAN, but this option was not there for me.

  OK, I got it working.  I actually found some real advice on Yahoo Answers (I know, right?)
  
  The driver who ended the work is here: support1.toshiba-tro.de/tools/updates/realtek-wlan/realtek_wlan_win7_2000016L_20110523.zip

  These are the instructions that I followed:
  
  You first need to know what model of network card you have in your system.
  If you are using the network card on the motherboard, then you need to install the drivers for your motherboard CD.
  
  If the network adapter is a PCI card, you must:
  
  1. right click on MY COMPUTER then click MANAGE
  2. open the Device Manager and right click on 'Network controller' (should appear with a yellow question mark) and then click Properties.
  3. go to the tab "Détails" and you should see "Device Instance Id" and below, you should have something like this:
  
  PCI\VEN_10EC & DEV_8168 & SUBSYS...
  
  The parts that interest you are the codes after "VEN_" and "DEV_".
  
  In my case, the codes are 10EC and 8168.
  Go to www.pcidatabase.com and look up the first code (vendor code).
  Click on the name of the vendor and search (CTRL + F) for the device code.
  There you should find the model name and number of your network adapter. You can then search for drivers.
  
  For example: search for PROVIDER 10EC and you should find:
  
  Realtek Semiconductor
  
  Click on the name of the seller and on the page that displays search 8168 and you should find:
  
  Chip number: RTL8168/8111
  Description of the chip: Gigabit Ethernet NIC (NDIS 6.0)
  Notes: DRIVER for XP PRO SERVICE PACK 2

• Error: "device driver will not install" when you connect Ipod touch to my computer

  Original title: Ipod touch

  HI, my Ipod touch is not recognized by my laptop. He says that it not install the 'device driver '.  Any thoughts on how to address this... much appreciated.

  Hi matthewherron,
   
  -What version of the operating system are you using?
  -Other USB devices recognized without any problems?
   
   
  If it is Windows XP that you are using, run the fix tool provided in the link given below and check if it contributes to the issue of fixing.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

• my printer, hp 4500 G510n-z will not install on my new laptop HP Windows 8.

  How can I get my printer (HP Officejet 4500 G510n-z wireless) to install on my new hp laptop Windows 8?

  I included a link to the drivers for your printer.

  Click here for the drivers.

  Let me know how it goes.

• My computer will not install the update of security for Windows Vista (KB2688338)

  The update starts normally say "create a restore point. Then he said: "some updates were not installed.

  I get the error code is:
  Code: 80070002

  Here's a good link for the specific error code you get:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

  I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

  Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

  Here are some instructions for uninstalling: uninstalling the printer software.

  You can download the driver here: Driver and software downloads.

• OfficeJet Pro 8615: driver will not install windows 10

  Upgrade to Windows 10 windows 8.1.  Printer worked fine for a while.  The 8/30 began to have problems with printing.  Since then, have run print and scan doctor, installation software and follow all the steps detailed on the support site several times but nothing has fixed the problem.  Indeed, after you uninstall as recommended during this process, the pilot don't reinstall it not. I tried to run the full driver package, the base driver package and method of windows driver.  It is very frustarting.  I've exhausted all possible solutions on the support site.  I need to know what to look for and the steps needed to install this driver properly and restore the ability to print.  Please help before I think it necessary to change Epson or Lexmark.

  Thanks for getting back to me. Knowing that the printer will install properly on a another computer told us there is probably something on the current PC is blocking the installation of installation (the printer itself is fine). Alternatively, you can try to disable the firewall or security programs you have temporarily while you try to install the printer on the computer to see if this will allow to complete the installation.

  Just to add: make sure that the printer is on the same network as the PC you install it on. Find the printers IP address in the menu wireless printers and type the IP address in a web browser on your PC. You should be able to access the built-in web server printers if the printer and PC are on the same network.

  Here are some steps more to try it too:

  Step 1: Uninstall the device:

  Just because it is possible that a part of the software package and the pilot has made its way on your computer, I have to you find and remove the installation of the computer files.

  1. Click on the Start menu
  2. Click on all programs
  3. Select the HP folder
  4. Select HP Officejet
  5. Select Uninstall
  6. Click on the Start menu
  7. Select the devices and printers
  8. Click on any device once in the file devices and printers just to highlight. Then click on the print server properties at the top of the window

  

  9. click on the drivers tab

  10. click on your driver HP Officejet

  11 select Remove downstairs

  

  12. in the window Remove Driver and package click delete the driver only , and then select OK

  13 click on apply then OK in the print server properties window

  14. close devices and printers

  Please proceed to the next step.

  Step 2: Unlock hidden system administrator account:

  1. Click on the Start menu and in the box "search programs and files", type CMD
  2. CMD will fill as a search above, option just right click on it and "run as administrator"
  3. CMD (command prompt) opens, type net user administrator / Active: Yes and press enter
  
  on your keyboard
• Next, close CMD, then restart your computer
• When your computer is on the newspaper in the new account which should show. It will be called administrator , and you have a password on it.
• If your computer automatically connects to your account after reboot to go into your Start menu, click the arrow next to 'shutdown' and choose 'switch user'. Now log in the administrator account.
• Under the administrator account, please click here to download the package full feature software and driver of your printer.
• Once the download is complete, follow the instructions on the screen to install your printer
• Once installation is complete, please open the HP Solution Center software to confirm the scan software opens and works correctly
• If software HP Solution Center now works very well, please log out of the account administrator and return to your normal user account.
• Under your user account, the full-function software package and the printer driver must show completely installed. Please click on the HP Solution Center icon to confirm if it always opens correctly. If HP Solution Center opens very well please run a test scan to confirm functionality.

If the HP Solution Center software works very well, you need to hide the administrator account.

Step 3: Hide the system administrator account:

1. Go to your Start menu and in the box "search programs and files", type CMD
2. CMD will fill as a search above, option just right click on it and "run as administrator"
3. CMD (command prompt) opens, type net user administrator / active: No. and press enter
4. Next, close CMD, then restart your computer
5. When your computer turns on it please test the software HP Solution Center again to confirm that everything works again according to normal.

Let me know the results of these steps, good luck!