FRM:40106: No navigable element block of destination

Similar Questions

• What means the error message: 40106 - no navigable element in destination block means?

  I have a couple of blocks in my form. One is a control block and the others are blocks of data. I get this error when I click on the search button in my form. Thank you.

  Hai,

  that means, in oracle, it should be minimum 1 control the navigable property must be TRUE.

  Which means that we cannot have a block in which all the items is disabled. To do this, you can set 1 active element and set the FALSE value as elements Update Allowed, insert authorized .

  Kind regards

  Manu.

• Info on the Navigation bar blocks the app

  I am in the process on porting my app to android for BB. It does not work as expected to a certain extent. On the navigation bar at the bottom of the screen by pressing the information icon blocks the app. Logcat don't don't give it to any output, after pressing the force close button logcat said that gc released an amount of memory. No work around for this question please. Thank you

  

  If I remember correctly, this is a bug in the Simulator. If it's nothing you should worry, because on the device itself, it will work as expected.

• have a multi-record with several unrelated elements blocking, filled by simply calling

  Forms of oracle, I have a form with a block of several recording, with several unrelated elements.
  One of these non-is a basic formula element.
  The formula for this article fills the others not consolidated items.
  A procedure with several out parameters is called.
  
  For example
  : cmr.id (now the unique id of a database record)
  : cmr.unbound_dummy, with the formula f_fill_blk_unbound_items(:blk.id)
  : cmr.unbound_adres
  : cmr.unbound_contactperson
  
  function f_fill_blk_unbound_items (p_id in customers.id%type)
  Return number
  is
  number of l_rc;
  Start
  customer_pck.get_adres_and_contactperson
  (p_id = > p_id - IN)
  , p_adres = >: cmr.unbound_adres - OUT
  , p_contactperson = >: cmr.unbound_contactperson - OUT
  );
  Return (0);
  end;
  
  QUESTION: How can I do something similar in the APEX; have a blocking of multi-record with several elements not related, filled by calling a procedure with several out parameters?

  The suggestion refers to functions in pipeline
  http://www.Oracle-Developer.NET/display.php?ID=207

  This will allow you to select your information you need in a query like

  SELECT * FROM TABLE(table_function)
  

  It should also more powerful than the example of forms.

  Scott

• FRM-40202. Necessary element to navigate Forms10g with Null values

  All,
  
  For an element required in Forms 6i, validation of required property fires when I try to get out of the element without enter any values forms 6i i.e. appears with the message frm-40202. Under the same form was compiled, moved to a 10g application server and executed through the URL. Surprisingly the same validation triggers not by deformity. If we were able to fix this with a validation in pre-text-element trigger, what's strange behavior.
  
  Can the PRO identify work autour / solution to overcome this problem in Web Forms in form of 10g and 11g form also in. Thanks in advance

  I should have asked you what Client OS and browser you were using as well. Take a look at the Oracle Forms 10g Release 2 (10.1.2.x): support for Client platforms Matrix to see which JRE is certified with your operating system and browser combination. The fact that you are using the JRE 1.6.0_07 is perhaps the cause. Were you to open a request of Service (SR) with the support of Oracle - one of the first things they will ask you to do is upgrade your JRE to a Certified version.

  Craig...

• Version a Forms control element/block ADF

  Hello
  
  I am trying to build a version of an existing form ADF. In this form, there is a date in a control block item controls the conditions where another block - the result being that only the data of the same date one is entered in the element date of control block is displayed. The date element is not related to the database, but it is entered by the user during execution. What is the best way to emulate this feature in the ADF?
  
  I experimented with a component of the Date of the entry and a display with a variable binding object in the where condition. But I'm unable to connect the Date of the entry with the link of the view object variable. Is it possible to refer directly to the component of the Date of entry in the where of the view object condition (as you can do in forms)? Or I go about it the wrong way altogether?
  
  I am aware that I could probably use a query Panel, but it seems a bit "much" to use it for a single date.
  
  Kind regards
  
  Andreas

  You can do this with a method of AM service like this:
  http://www.ScreenToaster.com/watch/stWUtcRkVLQ1FcRVxZXVhZ

• error when running form

  Hi all
  
  FRM-40106 no navigation point in destination block
  I need not any element of navigation, when I call the form, this error occurs after the click on the rest is fine how do I remove it
  
  Thanks and greetings
  Vikas Singhal

  Hi Vikas,

  Ideally, it should be at least an element of navigation in your building.
  If not, what are the elements of data in your building?

  But, if you want to avoid this error, then you can write the code below in the ON-ERROR trigger.

  declare
  err_code number := error_code;
  begin
       if err_code = 40106 then
         null;
      end if;
  end;
  

  It will be useful.

  Check the answer as useful / OK, if this can help you

  Carole

• Keyboard navigation forms

  Hi all
  
  I am very new to the Oracle forms.
  
  I have a canvas that contains several elements of text display data from a table.
  
  Now when I navigate from the first to the last text element it will successively from the left to the right.
  
  But when I got to the last text element that my wait is cursor must go to the next record, but this isn't the case instead that he goes to the first text element of the same folder.
  
  Please let me know what size I need to settle outside the previous navigation element definition and the order of the day navigation.
  
  Thank you

  Hello
  Call the property of the block by pressing F4 and define the Style of Navigation as a Change Record will work.

  -Clément

• Navigation issue

  Hello
  
  I have items in my following form
  
  Block a (Item1, Item2, Item3)
  Block B - control (Item4)
  
  With using the property of the Navigation element, I could navigate point! Item3 (when hit the move to position key input to the agenda) but since Item4 in another control block (block B) can not configure thro navigation item.
  
  If I want to focus on Item4 when hitting the button entry @ Item3. How this could be done
  
  
  
  Thax
  
  
  sexy

  Vanessa,

  You can use GO_ITEM OR GO_BLOCK in the NEXT ITEM KEY of the ITEM3 trigger.

  You can set the first navigable point of block 2 as Item4 and then use GO_BLOCK.

       GO_ITEM('.');
  

  OR

       GO_BLOCK('');
  

  Kind regards

  Manu.

  If this answer is useful or appropriate, please mark. Thank you.

• How to edit the sub-table "block" of the table?

  Hey all,.

  What is the best way to go on the replacement of the elements in a section of 20 x 20 of a larger painting? LabView allows this? I see that it is possible to replace a whole row/column at some point, but I can't find any documentation about the change of a block of items.

  Any advice?

  Thanks in advance to anyone who has the time to troubleshoot. Bravo must flow into the wine.

  Both indices to replace a subset of table (with input from table 2D) of wire and wire your 2D in the new input element block.  It will replace the block in the bigger picture.  He will not grow your original array if the block extends beyond its limits, but you really don't want to do it anyway.

• [Email protected] call blocking *.

  I see a lot of sip calls on my VCSe where [email protected] / * / ip ADDRESS or [email protected] / * / OR [email protected] / * /

  I was looking through the forums and found

  https://supportforums.Cisco.com/message/3401571#3401571

  Source Destination Protocol duration status Peer Type shares at start

  2013-11-15 12:26:27 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 32 seconds 408 / Request Timeout view local VCS

  2013-11-15 12:26:23 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 32 seconds 408 / Request Timeout view local VCS

  2013-11-15 12:26:20 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 32 seconds 408 / Request Timeout view local VCS

  2013-11-15 12:26:16 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 32 seconds 408 / Request Timeout view local VCS

  2013-11-15 12:26:13 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 32 seconds 408 / Request Timeout view local VCS

  2013-11-15 12:06:56 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 32 seconds 408 / Request Timeout view local VCS

  2013-11-15 12:00:53 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 33 seconds 408 / Request Timeout view local VCS

  2013-11-15 11:05:26 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 32 seconds 408 / Request Timeout view local VCS

  2013-11-15 10:14:14 sip:[email protected] / * / sip:[email protected] / * / <->SIP/SIP 32 seconds 408 / Request Timeout view local VCS

  2013-11-15 10:08:32 sip:[email protected] / * / sip:[email protected] / * / <->SIP SIP 32 seconds 408 / Request Timeout view local VCS

  It's my current CPL

  I now would change to:

  "http://www.Tandberg.net/Cpl-extensions" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "urn: ietf:params:xml:ns:cpl cpl.xsd" > "

  "" [email protected] / * / "destination =". * » >

  "" [email protected] / * / "destination =". * » >

  Is THIS CORRECT?

  It'll work, but you should have the two unathenticated and authenticated covered calls.

  Given that all your calls seems to come from @VCS_IP, then you can block all destinations by using * instead of specifying the address. Below is part of the CPL I use and it works for me.

  You can test if the CPL works or not using the VCS-E "tool to locate."

  In addition, you must disable SIP UDP on the VCS-E unless you really need, as these scanners use UDP to find potential targets.

  (Time only I had to re-activate if I have to make a call using the host name where the VCS-E did a search of A DNS record instead of using "normal" SRV records.)

  If you have ISDN deployed gateways, then you should also seriously consider changing the prefixes you use, i.e. Add # to the prefix to break the dial string. For example if your prefix is 99 and you want to call 9912345678, then you dial 99 #12345678 instead.

  Also see the deployment guide for more information about these issues - step 16, page 41 in particular

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Cisco_VCS_Control_with_Cisco_VCS_Expressway_Deployment_Guide_X7-0.PDF

  /Jens

  Please note the answers and score the questions as "answered" as appropriate.

• Block a call with voice translation-rule

  I have the voice gateway Cisco connected to the PBX through E1 PRI. I want to disable all PBX users make direct calls to _some_ IP phones. I tried to do it with the voice translation rule. Part of my config is shown below. But this configuration does not work. Where a mistake?

  voice translation-rule 2

  rule 1 rejection / ^ 57 [12456789] [1345678].

  rule 2 rejection /^57[12456789]./

  rejection of rule 3 / ^ 57. [123456789].

  voice translation-profile NoDirect

  translate called 2

  Dial-peer voice voip 200

  call block-translation-profile entering NoDirect

  disconnect-cause invalid number incoming call block

  destination-model 5 [78]... T

  Setup progress_ind allow 3

  session target ipv4:10.1.2.246

  DTMF-relay h245 alphanumeric

  codec g711ulaw 80 bytes

  No vad

  Good to hear that it has been solved.

  Thank you

  Radhika.

• Displays an element does not when I run the form...

  I create a form that is to have only two items.i passed under its item displayed text to item.when element type, I run the form his does not work and run window closed automatically.

  can you please tell me why his does not work... ..?

  You must have a single NAVIGABLE element in the form.

  Display are not NAVIGABLE point.

  This is the reason.

  Hamid

• Lists/Navigation Menu using universal theme APEX5

  I'm migrating my APEX to APEX5 application. I would like to use the new features of menu list/Navigation in the universal theme (so my menu items is displayed in the left navigation panel). I have a combination of static and dynamic options, and I don't know how to do this. My parent menu ('Reports' and 'Forms') options are static, but my choice of menu SUP for each will be the dynamic page navigation elements that will come from a SQL stmt. It would be a type of tree structure as below. Can you get it someone please let me know how to do this? Thank you!

  'Reports' (level 1 - static)

  "Report1" (level 2 option menu sub - dynamic)

  "I2" (level 2 option menu sub - dynamic)

  "Occurs3" (level 2 option menu sub - dynamic)

  .....

  'Forms' (level 1 - static)

  "Form1" (level 2 option menu sub - dynamic)

  'Form2' (level 2 option menu sub - dynamic)

  "Form3" (level 2 option menu sub - dynamic)

  
  

  bobmagan wrote:

  Thank you. My application was built on the sensitive to the APEX 4 theme. I wanted to use the new universal theme to take advantage of the update options. Previously, I had 2 parts of PL/SQL ('Forms' and 'Reports') who seized the dynamic pages of my custom table 'page' (see below). This would create a type menu tree they could click on launch my new pages for each. I hope to do the same sort of thing in the navigation/universal list menus.

  ----------------------------

  DECLARE

  Get_pages CURSOR IS

  Select page_alias, page_description

  page

  where page_type = 'REPORT '.

  and display_on_menu = 'Y '.

  order of page_order, page_description;

  BEGIN

  htp.tableOpen;

  Get_pages LOOP PAGE

  htp.tableRowOpen;

  HTP.p (')');

  If: APP_PAGE_ALIAS = page.page_alias then null;

  HTP.p ('': page.page_description: '');

  on the other

  HTP.p ('': page.page_description: '');

  end if;

  HTP.p (')');

  htp.tableRowClose;

  END LOOP;

  htp.tableClose;

  END;

  The application to the universal theme of the switch.

  Create a dynamic list query-based in the sense of:

  /* Static parent entries */
  select
      1                      lvl
    , 'Reports'              label
    , null                   target
    , null                   is_current_list_entry
    , 'fa-table'             image
    , null                   image_attribute
    , null                   image_alt_attribute
    , null                   attribute1
    , null                   attribute2
    , null                   attribute3
    , null                   attribute4
    , 'REPORTS'              attribute5
    , null                   attribute6
  from
      dual
  union all
  select
      1
    , 'Forms'
    , null
    , null
    , 'fa-edit'
    , null
    , null
    , null
    , null
    , null
    , null
    , 'FORMS'
    , null
  from
    dual
  union all
  /* Dynamic reports entries */
  select
      2
    , page_description
    , 'f?p=' || :app_alias || ':' || page_alias || ':' || :app_session || '::' || :debug
    , null
    , null
    , null
    , null
    , null
    , null
    , null
    , null
    , 'REPORTS'
    , page_order
  from
      page
  where
      page_type = 'REPORT'
  and display_on_menu = 'Y'
  union all
  /* Dynamic forms entries */
  select
      2
    , page_description
    , 'f?p=' || :app_alias || ':' || page_alias || ':' || :app_session || '::' || :debug
    , null
    , null
    , null
    , null
    , null
    , null
    , null
    , null
    , 'FORMS'
    , page_order
  from
      page
  where
      page_type = 'FORM'
  and display_on_menu = 'Y'
  order by
      12 desc /* attribute5 */
    , 1       /* level */
    , 13
    , 2
  

  Note that the attribute columns 1, 2 and 4 are taken into account by the model Menu lateral Navigation, then jump on them and use the attribute column 5 and for all required custom data in your query.

  Then go to the desktop user interface detail pageand set attributes for the Navigation Menu:

  List of the navigation menus:

  Position: Side

  Model from the list: Side Navigation menu

• CSS - do not know what to change to begin first of all for the smallest device (border in the navigation bar collapsed)

  I am starting with the smallest device (iPhone, 320 pixels wide) and have implemented the skeleton page. I added a tag to the class to change the background of the original black to Tan, but cannot find a way to cross the border in the white navigation bar icon. I thought that my class label would substitute, but does not appear. Also, is there a setting that I should look for in the bootstrap.css (read-only) which can be adjusted to display the navigation elements rather than collapsed in about 320-768 pixels button icon? Any help would be appreciated.

  John

  <! DOCTYPE html >

  < html lang = "en" >

  < head >

  < meta charset = "UTF-8" >

  < meta http-equiv = "X-UA-Compatible" content = "IE = edge" >

  < meta name = "viewport" content = "width = device-width, original scale = 1" >

  < title > Untitled Document < /title >

  <!-"bootstrap"->

  < link href = "css/bootstrap.css" rel = "stylesheet" > "

  < link href = "css/phone.css" rel = "stylesheet" type = "text/css" > "

  <! - HTML5 shim and Respond.js for IE8 take in charge of the HTML5 elements and questions from the media - >

  <!-WARNING: Respond.js does not work if you view the page via file://-->

  <!-[if lt IE 9] >

  " < script src =" https://OSS.MaxCDN.com/html5shiv/3.7.2/html5shiv.min.js "> < / script > .

  " < script src =" https://OSS.MaxCDN.com/respond/1.4.2/respond.min.js "> < / script > .

  <! [endif]-->

  < / head >

  < body >

  < div class = "container-fluid" >

  <! - start the header image - >

  < div class = "row" >

  < div class = "col-xs-12" style = "" background-color: #ABF0A7; "> < / div >"

  < / div >

  <! - end header image - >

  <! - start navigation - >

  < nav class = "navbar, navbar-reverse rennavbkgrd" > ""

  < div class = "container-fluid" >

  < div class = "bar navigation-header" >

  < button type = "button" class = 'bar of navigation-toggle' toggle data = 'collapse' data-target = "#myNavbar" >

  < span class = 'bar icons' > < / span >

  < span class = 'bar icons' > < / span >

  < span class = 'bar icons' > < / span >

  < / button >

  < / div >

  < div class = "navbar-collapse collapse" id = "myNavbar" >

  < ul class = "navbar-nav nav" >

  < class li = "active" > < a href = "#" > about us < /a > < /li >

  < li > < a href = "#" > < /a > < /li > team members

  < li > < a href = "#" > Subscriber packages < /a > < /li >

  < li > < a href = "#" > insurers < /a > < /li >

  < li > < a href = "#" > Photos < /a > < /li >

  < li > < a href = "#" > contact us < /a > < /li >

  < /ul >

  < / div >

  < / div >

  < / nav >

  <!--end of navigation-->

  < div class = "container-fluid" >

  < h1 > Just a few of us < / h1 > <! - subtitle of the page - >

  <! - start the main text area - >

  < div class = "row" >

  < div class = "col-xs-12" style = "" background-color: Lavender; "> < p > welcome to the Renegades." duis dapibus molestie nisi egestas Magna non semper. ID justo nam posuere duis laoreet auctor fames. Volutpat placerat ut suspendisse imperdiet porttitor felis dui donec pulvinar sollicitudin sollicitudin so tempor. Massa feugiat quam viverra nunc enim libero torquent torquent mus nec lectus is turpis.

  < /p > < / div >

  < div class = "col-xs-6" style = "" background-color: #F39393; "> < p team photo > < /p > < / div >"

  < div class = "col-xs-6" style = "" background-color: #B3EBB7; "> < p >"

  Penatibus ante, MPCs fames morbi egestas duis dapibus molestie nisi Magna non semper lorem. ID justo nam posuere duis laoreet auctor fames. Volutpat placerat ut suspendisse imperdiet porttitor felis dui donec pulvinar sollicitudin sollicitudin so tempor. Massa feugiat quam viverra nunc enim libero torquent torquent mus nec lectus is turpis.

  < /p > < / div >

  < div class = "col-xs-12" style = "" background-color: lavenderblush; "> < p > third text < /p > < / div >"

  < / div >

  < / div >

  <! - end of main text area - >

  < / div >

  <! - start the footer - >

  < style footer = "" background-color: #F2DA3E; "> < p > copyright & copy;" Renegades 1999 team kitchen. All rights reserved. < /p > < / footer >

  <! - end of footer - >

  <! - jQuery (necessary to Bootstrap JavaScript plugins) - >

  "< script src="js/jquery-1.11.2.min.js "> < / script >

  <! - include all the plugins compiled (see below), or include individual files to the need - >

  < script src = "js/bootstrap.js" > < / script >

  < / body >

  < / html >

  Use navbar-default (light) instead of - reverse (dark).

  And you can target the Bootstrap selectors in your custom CSS code.  No additional required courses.

  .NavBar.NavBar - default {background-color: #D2B48C ;}}

  Nancy O.