have a multi-record with several unrelated elements blocking, filled by simply calling

Similar Questions

• I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  Note: I'm able to get two phones to ring with an incoming call, but the 5s consist not out. Whenever I dial a number, it says call failed.

  Do not dial a number. Try to choose a contact in the contacts App and tapping on telephone button.

  That said, I don't think that outgoing calls work on continuity since another iPhone. given that the iphone is designed to make calls through its own service.

  Document to support that you just did not mention calls from a secondary iPhone at all, it points to Mac, iPad and iPod touch, which leads me to believe that it won't work.

  It runs from devices such as iPads and Macs, who have no other way to place a cell call.

• Read the XML response with several root elements

  Hello
  
  
  I am trying to reach the scenario below but unable to do so. Please help urgently.
  
  I get a response of service that has several roots elements.these root items may change during execution of... I need to read items different roots and extract data from its subelements.
  
  Kind regards...
  
  In the hope of an answer...

  I guess over time, the service returns just 1 rootnode, but this rootnode property can change

  You can use a switch after the invoke

  If $response/myroot1
  assign $ myroot/response to myroot1_var

  If $response/myroot2
  assign $ myroot/response to myroot2_var

  etc.

  in order to check what is in the node root before you assign it to your temp variable
  or if you have logic that is specific based on this root node, you can simply implement all these branches in the switch and run a logic there, based on the selected rootnode property

  several implementations are possible

• Registration with several devices in hearing issue

  Hello-

  I'm working on Windows 10 on hearing, so I don't have the ability to record with several devices at the same time, given that I am limited to Windows provides the option of Ms. I know that I need to install a different driver while I have the ASIO option in the drop down hearing. What more reliable ASIO that I can install for free and do not give me a virus while I am able to record my external USB sometimes and the internal stereo mix of my computer?

  Thank you!
  

  The only way to achieve what you are asking is to find, download and install the free ASIO4All. http://www.asio4all.com

  However, if this will allow you to use the "internal stereo mix' of your computer I'm not sure.

• Selection of the records of several dates but specific time

  Hello:
  I have to select records of several dates, but time should be 00:00:00 to 06:00:00 (i.e. 12 AM - 06:00)
  
  For the part of date, this can be done:
  
  WHERE
  START_TIME BETWEEN TO_DATE (APRIL 1, 2012 ',' DD-MM-YYYY ') AND TO_DATE (5 APRIL 2012 ',' DD-MM-YYYY ')
  
  But how can I fix the time above mentioed.
  
  Please let me know.
  
  Thank you/Tequila

  you mean something like this?
  If you are using timestamp you can use extract (time deposit)

  with t1 as
   (select sysdate - 3 / level as dt from dual connect by level < 101)
  select dt, to_char(dt, 'HH24') from t1 where to_number(to_char(dt, 'HH24')) < 7
  

• navigation block multi-record question

  Hello
  
  I have a block multi-record with 4 fields in each record. Each field has a LOV attached to it. When I select a value from the LOV to the 1st field, the 'control' should go to the next field (ie., the slider should move to the 2nd field).
  
  How can I do this?
  
  Thank you
  Chiru

  No need for any trigger, set the automatic 'Skip' property for the LoV to 'yes '.

• SA520W VPN from Site to Site with several VLANs

  Hello

  I have a customer here with several VLANS in their places who wants to set up a VPN from Site to site between 2 devices SA520W. Unfortunately I can not find a way to set it up. In the VPN policy, I can choose between everything (which is not what I want, I want only traffict between subnets the routed via VPN), IP address unique, a beach (in a subnet) and a subnet itself - but only one. I don't find a way to configure several subnets in the selection of local traffic and remotely. Adding another IKE policy between the 2 sites does not either (which is good normally).

  Any ideas? Anything I'm doing wrong?

  Thank you for your help.

  Best regards

  Thomas

  I know that if you have an ASA or a router, you can define as VLANS to pass through the tunnel.

  Do not have access to a SA520W to test...

  A recommendation might be to post the question on the SMB community where they answered questions related to this product, just to check what other people did.

  Federico.

• Dynamic region with several task page fragment flow isn't refreshing VO

  JDeveloper version is 12.1.3 and Weblogic Server is 12.1.3.

  We have a dynamic region with several task page fragment flow.  We have created a menu that will open on the workflow task in the dynamic region. Before defining the workflow id in the bean, we execute query on the original Version after setting the bind variable. When we click on the menu is open the flow of relevant tasks in the region and showing the Original data table.

  But when we open the same request again to a different browser session, it shows all the data in the original Version when the user clicks on the relevant menu item...

  I have attached the code used to navigate to the different workflow tasks written in the bean from the back of the home page.

  We have no idea why anyone what happens, if it's a server problem or a code issue. Because unless and until we open the target application in a new browser it works fine.

  We tried and deployed on a remote server as well, but it gives the same question...

  Would be really grateful for the help...

  The user, the code you posted has some serious problems. Never, I repeat never store a reference to an application module in a static variable in a bean. That is why you see only data once. After that, the second session reuses the application module from the first to the configuration data, but to display data it uses a module different application.

  The way you try to configuration data is too bad. You must pass the parameters to the workflow and init data in the default action of the workflow instead of doing before installing the new workflow id. A workflow is a unit of work that is kind of a black box. You may not assume that the stuff you do outside of this black box can be seen inside the box. This is only true if the workflow share the same control of data as it's parent (share of data control).

  I suggest you read some documents on the workflow and how they work. A good start is to look at this video https://www.youtube.com/watch?v=A3CmDhWHaG0

  or work through this tutorial 12 c (12.1.3) Oracle JDeveloper tutorials - working with bounded task flows, regions and routers

  Timo

• Can I have 'paste' an anchor with a specific text?

  This seems like it would be easy to do, but I can't understand it. I have a long page with lots of elements on it. Above, I have a list of subject headings. I linked these subject headings to the items listed below with anchors. Everything works very well. However, on a regular basis, I add things to lists. That pushes the text down... but not the anchors. So the links so not to go to the right place. Is it possible to "anchor" the anchors to keep them by the text that they are supposed to be for?

  Thank you.

  Julie

  Hmmm, it's a very good question. Easy to make in the code directly, but in the Muse, I see it a little more difficult. So now, I have to try to find a way ;-)

  But in all honesty, if the page is long and is frequently updated with more content that you can look at the structuring of a slightly different page using the widget of composition of ToolTip instead of anchor points. Or are you using scrolling between the anchors so effects?

• AE even project with several compositions / need them changed first

  I have on Ae project with several busy list. Each animation list is its own model but its seems I cannot use the project to the Prime Minister.

  I think this because I can't search and find each model extract sequences in my first.

  I need them to be editable so off heartbreaking will not work.

  Is there a work around for this or a way of standard to do this?

  You comps in first not importing projects. I can't say what you're missing here. Just go to Premiere Pro and select Import the new After Effects Composition. Link to a project and then choose a composition. Then repeat for the other compositions that you want to import, and then drop them into a sequence.

• How to check the previous value of the element in a multi-record block

  Oracle Version: 10 g
  Forms Version: 10 g
  
  Hi all
  Hello everyone, I have a multi-dossier block in a form where one of the values of elements is of LOV.user can select the value of LOV.
  
  If once the user selects the value of LOV and moves to the next of the multi-file record, and selects the value of LOV again, I shouldn't allow users to select the previous value of the user in order to avoid duplication of records.
  
  and important remark is that I should get there before you save it in the database because once registered in the database I can compare the values and hide the previous value.
  
  
  Any help will be appreciated.
  
  
  Thanks and greetings

  This is a question frequently asked in the forum! There are several different solutions. Take a look at the following articles. Both will perform the necessary verification of duplicates.
  Forms - registration of treatment group (value in double check...
  or
  Avoid records duplicated in a block

  If none of these solutions don't work for you, search the forum for other options.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• 'Image' of block multi-record element type

  If I have a block of several record with a type of picture element, is it possible to load only / display an image for some of the records on a datablock? It seems that "READ_IMAGE_FILE" still applies to the whole element, which is responsible for the image for all records in the block... I can't find anything that will load only the image of a certain recording that I said... Something as sort of 'SET_ITEM_INSTANCE_PROPERTY' where I can put the record number I want the image to display on. Such a thing exists?
  
  Thank you!

  If the item of the Image is based on a BLOB column, you can escape to the population of the order of the day. I see no work around. It's like you ask a record, but do not want to display the content of the column.

  François

• Having several problems with Adobe Premiere elements 13.  Now my worst is that when I add text to a clip, it comes out "Auto color" so that the text is in place.  Help?

  I'm having some trouble with 13 elements.  One is that, in mode 'play', the sound stops just happening.  I have to click 'pause' and then 'go' again and the sound returns.  It stops also play on its own, I have to hit 'play' on several occasions.  Just got the software, used intensively for a week or two and it just started happening.dor

  Today, when I add text to a clip, it deletes now on "Auto color" so that the text is visible in the clip, then automatic color when the text is missing.  Any suggestiosn?

  nikovichb

  If we look at the same thing, you called the attention a strange first elements 13 titration AutoColor/module interaction. This can be reproduced to the Expert or

  fast working space. I will be this demo within work fast since it's where you worked.

  1. import a still in fast work/film space.

  2. with the still selected, go in Panel of Palette/Color tab/settings setting expanded and just click the close the route of the tab Auto color tab adjust.

  3. go into Menu/New text/default text to open the module of titration of the project. When you do this, you see the following and not the still on which the text title must go.

  

  And when you close the titration module, you will see the title of text "Add text" in nature.

  

  The only solution I can think of right now is to create the title of text and then apply the Auto color to the still.

  It is interesting that this happens only with the color of the car in the color Panel. If you do not click

  Color Panel and to use more options for color adjustments, this behavior does not occur.

  Deleting the Adobe Premiere elements Prefs file does not correct this situation.

  Regarding

  I'm having some trouble with 13 elements.  One is that, in mode 'play', the sound stops just happening.  I have to click 'pause' and then 'go' again and the sound returns.  It stops also play on its own, I have to hit 'play' on several occasions.  Just got the software, used intensively for a week or two and it just started happening.dor

  I think that here we have to explore the parameters of the project (presets), rendered the source and chronology of media properties and non-rendusent contained prior to export.

  Please read the foregoing

  a. check if the Auto title text color glitch I've seen what you describe in your situation

  b. give the details of your project so that we can explore cause and effect for irregularities in reading content of chronology, as seen in the edit box monitor.

  Thank you.

  RTA

• Whenever I have download an image with the command "save the image under...". ", it records in a useless file of 168 bits.

  As stated, whenever I have download an image with the command "save image under" he recorded in a useless file of 168 bits. This does not happen everytime I have save an image, but more often the not, and I don't have a lot of useless files hang out because of this. Is it possible to re - download each image 168 bits that he should have been downloaded in the first place? Is it possible to ensure that this does not happen?

  Here's what it looks like:
  http://i.imgur.com/yzgwwgC.gif?1

  This means that you are not allowed to do this action.
  The site could use a transparent overlay image to protect the actual image or otherwise has put in place a protection.
  You can check if see you the image in "tools > Page Info > Media ' and save it.

• "Multi Tab Handler" recorded not several tabs

  Extension Manager multi-onglet in FF17 recorded not several tabs. It is possible to select them, even to click on 'Save selected as files tabs' but then... nothing happens.

  Hello.

  Multi Tab Handler is not a Mozilla add-on: while the addons are reviewed by Mozilla to ensure safety and performance, Mozilla does not support end-user for Addons; This task is located on the addon developers.

  As related by https://addons.mozilla.org/en-US/firefox/addon/multiple-tab-handler/ support site is https://github.com/piroor/multipletab/issues and you can submit questions here.

  Please let us know how it works for you. Thank you!