FRM - 40654 Record has been updated by another user. Refresh the file

Similar Questions

• FRM-40654: record has been updated. Requery block to see change

  Hello world
  We are facing the error when posting INVOICES.
  It happens when the REMIT_TO columns * are NULL in AP_INVOICES_ALL.
  When applying a correction of data to fill, it's good, but on new bills, we see again the same.
  We have applied the patches required without a bit of luck.
  We are on 12.0.4.
  If anyone can help?

  Hello

  Please see if (Note: 787800.1 - not able to cancel invoices due to the FRM-40654) help.

  As suggested by the support, we have applied the patches 8575543,8577821 and 8205469 without a bit of luck.

  We also noticed that we do not see the issue in cloned instance.
  The only diff is THAT PROD is two nodes (db and application) whereas clone runs on the single node.
  We have the most recent version of the file that was referenced in the notes 757474.1.

  I would say that most likely it is a matter of data that need to be corrected (assuming that the cloned instance is identical to your production instance).

  Clues/suggestions/comments are welcome.

  If no help above, I would say that you follow-up with Support from Oracle.

  Kind regards
  Hussein

• How do I debug: FRM-40654 record has been updated. Requery block to see change

  Forms release 6i.
  Is it possible to debug this error?
  I have a great shape. (Size: 5 MB)
  And I get this error.
  
  I want to know what data have been changed and are not synchronized with the db, but How to find the datablock, which raises this error message?
  
  Published by: Walter on 10 Sep 2012 05:21

  Hello

  Create a trigger level form-ERROR, then for this error, view the name of the block that triggered it:

  DECLARE
       lv_errcod NUMBER := ERROR_CODE;
       lv_errtyp VARCHAR2(3) := ERROR_TYPE;
       lv_errtxt VARCHAR2(80) := ERROR_TEXT;
  BEGIN
       IF (lv_errcod = 40654) THEN
         Message(lv_errtyp||'-'||to_char(lv_errcod)||': '||lv_errtxt
         || '  on block:' || :system.trigger_block);
       ELSE
            Message(lv_errtyp||'-'||to_char(lv_errcod)||': '||lv_errtxt);
       END IF;
       RAISE Form_Trigger_Failure;
  END;
  

  François

• Error - file has been updated by another user. Ask to see change

  Hello
  
  If I save a record in forms (Custom) after this attempt to change or add content in the fields, I get the error below.
  FRM-40654: record has been updated by another user. Re-query to see change.
  
  Please provide the inputs.
  (Form 10g Version, using this form in Oracle Application R12)
  
  Thank you
  Prasanna

  Prasanna,
  Some of the typical causes of this error are:
  1 database column is of type CHAR (?) and forms is of type VARCHAR2 (?). As CHAR() pads type, the length of the Forms data will be cut padded spaces of the value of data when the column is queried in the form. The solution is to update the VARCHAR2 database column so that the data are not completed.
  2 database trigger on the table changes the data in the INS, the UPD treatment or if you have a Post-Ins/Upd trigger that changes the data in the table. The solution is to clear the block and update or change your processing logic to prevent editing the table.
  3. after query trigger on the data block changes something in the base table. The solution is to eliminate the process after query that updates your block element.

  Here are some of the most common causes of this error.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• One more time: Houston-25014: the record has been changed by another user. Please try again.

  Hello

  JDev 11.1.2.4

  I have a workflow where I execute with params VO, and then navigate to a view activity. On this page fragment, I click on a button that calls a PL/SQL procedure in the module of the application. The proceduce updates a row in the table. After this method call, I navigate to the same run with params.

  Execute with params-> view activity method-> call-> Execute with params (the app module method)

  But I have an exceptional:

  oracle.jbo.RowInconsistentException < DCBindingContainer > < reportException > [2669]: Houston-25014: the record has been changed by another user. Please try again.

  at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelectForAltKey(OracleSQLBuilderImpl.java:1078)

  at oracle.jbo.server.BaseSQLBuilderImpl.doEntitySelect(BaseSQLBuilderImpl.java:552)

  at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:8311)

  at oracle.jbo.server.EntityImpl.populate(EntityImpl.java:6975)

  In the log, I see the error.

  Compare entity < EntityImpl > < compare > [2305] has no attribute Addr1

  < EntityImpl > < compare > [2306] original value: COURTUPD

  Target value < EntityImpl > < compare > [2307]: COURTUPDfewfew

  The update in the procedure updates this field. The procedure performs validation, I made the call.

  I suspected that the case of ghost ADF so I put update on update for this field, but it does not work.

  Any idea on who is the user who changes my file without telling me?

  Thank you

  You have something in your entity that has changed.  Call rollback on your transaction module app before executeWithParams put it in a clean condition.

• Attempt to update v9.4.3 and am said iPhoto update is not available because it has been purchased by another user despite the fact that my new Mac utilities show that he got Apple 19/04/13.  How can I fix this?

  My attempt to update iPhoto which presents in the folder utility as having been obtained from Apple on the 19/04/13 is rejected w/notice that the update is not available for this Apple ID because it has been purchased by another user.  How can I get the update?

  There are some inconsistencies in your question:

  1. If you do not have 10.11.4 then you can not possible be eager to download iPhoto 9.4.3 because it does not work on El Capitan.  You'll need iPhoto 9.6.1.

  2 - If you get the message that iPhoto was bought under another Apple ID then he leads us to ask if you have purchased your new iMac or used?  Try to go on the App Store, sign out and then sign in with your Apple ID and see if you get the same message.

  We are just so not the same page what system are you running?  What version of iPhoto do you currently have? Have you bought the new iMac or used?

  

• its update is not available for this Apple ID, article has been bought by another user or because it has been refunded or cancelled

  Hello

  I'm updating iPhoto, but I have this message:

  "This update is not available for this Apple ID, article has been bought by another user or because it has been refunded or cancelled.

  Could you help me?

  Thank you

  Stéphane

  Apple is no longer develops and supports iPhoto.

  If you have previously bought iPhoto, it should be in your list of purchases made on the App Store. If you do not see, it may be under hidden purchases. You can try to download it from there.

  Also, try this link:

  iPhoto 9.4.2

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ID has been switched to another Member of the family

  When signing on a new device my ID apple has been switched to the coordinates of my wife.  I don't know how it happened and can't figure how to put back on my id

  Open Contacts, select your card and then try to record my Contacts/Map/Make file.

• Is it possible to know if transparency (multiply / darken etc.) has been used in any part of the file select all objects?

  I recently had problems with Illustrator files with objects and text.

  These elements consist of spot colors and have effects, such as multiply, obscure or Luminisity applied to them.

  Our current workflow requires us to save the only 1 file .ai to PDF which must pass through a TEAR, then accelerated for printing by other software.

  Version staircase to the top of the file is sent to me, opened and edited in Illustrator and then re-recorded in PDF format to send to a print finisher (varnish or sheet, for example)

  It is at this point that some items were not displayed correctly or at all.

  I know that sounds complicated process (and is!)... but is it possible to work around this issue?

  Thank you

  The Flattener Preview Panel?

  Check "all transparent objects.

• A requested record has been deleted-SSHRC

  Dear all,
  
  SSHRC employees using ask confirmed permission and the workflow is triggered to his supervisor, before approving the supervisor deleted employee self-service employee record and apply for leave with fresh dates. When the Manager to approve to demand fees he is warning message
  
  * "A requested record has been deleted by another user and could not be recovered. Any changes to the deleted record cannot be restored. If an error has occurred because of the deleted record, re - query the records to get the new data or to restart the operation. "
  
  Stage of reproduction
  
  Login to employee Self Service
  
  Create the Absence (confirmed)
  
  Remove the Absence and permission to charge
  
  The notification to the window supervisor receive the warning message.
  
  
  Please advice how more to come this warning message
  
  Concerning
  Suresh elodie

  Suresh,
  Please specify if the error occurs for the new absence request or old pending the approval of absence request.

  As mentioned by you, it seems that the issue may be that user attempts to approve the application of absence already deleted. Whenever the user asks for approval of entry without it will be notified to the approver. But before approval by the approvers if we delete the entries, that the absence entries will be deleted, but the workflow, entries will still be status pending. So whenever we remove all "Transaction approval pending", it is advisable to complete or cancel the corresponding workflow transaction also.

  Here in your case, please delete or put an end to the application for approval of error and check in the workflow monitor that any pending transaction exists. If then also remove and re-enter the absence request. Please try and let us know if it works.

  Thank you
  Siva

• Update XCode is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled.

  When I try to update Xcode the following error message will be display... Looking for the solution...

  Hello

  "This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled"

  Applications installed on your Mac are updates available or accepted from the Mac App store, but you have purchased using an Apple who is not currently signed in ID. Log in with the Apple that you used initially to buy apps ID. If you don't know what Apple ID was used, check to see if someone else who uses your Mac has accepted these applications.

  Information above is taken from this Apple support article > Accept bundled apps using the Mac App Store - Apple supported

• iPhoto has stopped working. When I try to download the latest version, I massage "this update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."... why?

  iPhoto has stopped working. When I try to download the latest version, I massage "this update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."... why?

  Mac OS X 10.10.3 and newer include Photos, which is designed as a replacement for iPhoto. If you want to go on the use of iPhoto in addition to or instead of switch to Photos, click here and try following the instructions; you will only be able to do if you got before where associated with iPhoto on the Mac App store.

  
  (138042)

• I just spent over 1.5 hrs with servThis client update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled. Thank you very much

  "This update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."

  I can't update Flash or Iphone etc. I bought the Mac in a well-known Apple authorized store in Toronto, Ontario thank = you much, I tried to contact Adobe customer service after more than 1.5 hours was not able to help, so I'm here. Hello everyone. My first entry!

  Looks like you're not able to connect using Apple ID. If so, please work with the Apple support team.

  You can download the latest version of the flash player from Adobe Flash Player install for all versions

  Thank you.

• My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and that she is trea

  My OS has been updated from Windows 7 to Windows 10 without disabling the Adobe Acrobat 9 installed on the machine. Now I'm not able to activate the reinstalled Adobe Acrobat. When I try to record the serial number, it is not accepted and is considered as invalid. Is it others to activate the serial No. ?

  Hello

  Please see error: "serial number is not valid for this product". Adobe Creative Suite and serial number incorrect error

  Alternatively, you can contact customer service

  Hope that helps!

  Kind regards

  Sheena