Similar Questions

• Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Try to download a trial version of Acrobat Pro, but of course, I have an error message: "the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. Any suggestions?

  Download from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html.

• Error message the application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  
  

  The error message happens chronically today.

  It does not matter what I try to install the air file.

  I uninstalled, cleaned the registry and all the usual things.

  And then re-installed-with the same error messages

  
  

  Windows 7. Current update.

  processor 2.8 ghz, 12 G Ram - one machine to cook breakfast and make the beds.

  
  

  
  

  " The application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. "

  
  

  
  

  This is the last log of installation-

  I am not able to find out how to decipher what it means.

  
  

  Someone would have noticed?
  

  
  

  [2015-02 - 18:10:58:58] Unpackaging/validation complete

  [2015-02 - 18:10:58:58] no app location to "LocalizerLeadsTool" appID and pubID "

  [2015-02 - 18:10:59:01] conversion of unpackaged to a native installation package in C:\Users\admin\AppData\Local\Temp\flaAA62.tmp application

  [2015-02 - 18:10:59:02] create an installation package Native failed: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "unhandled exception error: EndUpdateResource: error Windows #5" errorID = 0]

  [2015-02 - 18:10:59:03]

  I got a response on another area of support.

  And

  Because I asked for help here-

  I think it's the kind of thing to do to post the

  steps that allowed me to correct.

  I knew I had the latest Adobe air platform.

  I felt that I knew that the download files were updated.

  So-

  What was one of the suggestions I've had -

  Told to turn off the firewall and antivirus.

  Instinct made me disconnect the machine from the router.

  I continued and disabled all the protections I had put in place-

  and watched as the first program installed air -.

  Since before January.

  Then put those protections back in line.

  And re-attached the router line.

  It doesn't seem to work now.

• Coloration of the code for the PHP files using CSS

  Coloration of the code for the PHP files using CSS
  

  The Situation:

  It is possible to mix PHP and CSS so that you create a PHP file and it is served to the user in a CSS file. It works just like writing a normal PHP file which is then processed and used in HTML. To do this, you create a PHP file and at the top of the file, you add the following line of code:

  <?php header("Content-type: text/css"); ?>

  This line tells the browser that the file is CSS instead of HTML. Fantastic.

  Here is a link to a more detailed article on the subject: http://www.barelyfitz.com/projects/csscolor/

  The problem:

  The problem is that when I create a PHP file in Dreamweaver code colors in the document like PHP for PHP and HTML to CSS code code because it still thinks the document is supposed to be a HTML document. Is there a way to change the style of this situation? I find that code coloring to normal CSS files is really useful and would like to be there instead of just black text.

  Other information:
  

  I already have this submitted a feature request to Adobe, but I never heard back. Does anyone know how to do this now?

  I would really like to see the code coloring to adapt to the content type of the file, when the file is PHP. So if no content type is specified, values by default in html format, but when it's CSS, code coloring so a coloration of the different code is used. It could also adapt to files JS, XML files, the works. But really, I just want to add the PHP/CSS code coloring.

  I'm certainly not an expert, and this is my first time looking at the file,

  but it looks like the section.

  "ID ="CSS"doctypes ="CSS"priority '50' = > ' see the style css and

  the and refer to where the design must

  be applied. If that is correct then the code you provided should style

  It all starts after the

  and ending with another php code? It should be then that a

  tag additional php to be present in the document of 'close' the

  blowdry.

  And the continuation of this line of thinking, I have just that in the (php-> css)

  file. I placed my code. Then

  After the CSS, I placed another block of php: and it works!

  The CSS is styling just like should the CSS.

  Logically, you need that, and it seems to work ok for me without it. If Yes, you can change "" to be more explicit and less impact for PHP parsing, such as ' /DW/ '.

  Haha, Unfortunantely, PHP is more the same color scheme. He

  went from normal red blends what the html code looks like

  scheme (blue with quotations from green text). Fortunantely this configuration is far

  more convenient than the previous color coding!

  All subsequent PHP Directives are coloring properly for me - it's just the first one that triggers the coloration (e.g. ) is not. What do you see?

  If, therefore, in the XML file you added in CodeColoring.xml, you can change:

  scheme = "outerTag.

  is similar to the colouring of the PHP Directive:

  scheme = "customText" id = "CodeColor_PHPScriptBlock".

  This causes the entire PHP directive is red color - not optimal, but a little better.

  HTH,

  Randy

• Having problem to add code to the .vmx file.

  I try to add the code below in my .vmx file.

  mainMem.useNamedFile = "FALSE".
  MemTrimRate = 0
  prefvmx.minVmMemPct = "100".
  prefvmx.useRecommendedLockedMemSize = 'TRUE '.
  sched.mem.pshare.Enable = "FALSE".
  I added my vmx file attachments, so you can take a look.
  I added these lines of code to the wrong file?

  After that, I am unable to open the virtual machine and get an error message:

  http://i50.Tinypic.com/33mwub9.PNG

  IM using Windows 7 pro on the host computer. With the help of VMware Workstation 8

  Help please! =)

  The file you connected, Windows 7 vmxf, isn't the .vmx config file and does not have the file, you should be editing!   Remove your Windows 7 vmxf file changes and edit the .vmx instead.  If you still have questions after that cleaning of the .vmxf file and modifying the .vmx file and then archive them both in a zip file and attach to a response message.

• This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file.

  This is the message I get when I try to install the latest version of DPS App Builder "application could not be installed because the Installer file is damaged. Try to get a new setup of the author of the application file. On my Mac.

  
  

  I tried to uninstall and reinstall

  
  

  Help, please!
  

  What version of Mac OS do you have? I guess it's 10.6.8 which is not supported by the App Builder. You need to update to a newer version of Mac OS.

  Neil

• Is it possible to save photos from lightroom without the original file?

  I recently imported photos into lightroom, but I did not back up the original files on my computer and they are deleted from my card.  The images still appear in lightroom.  Is it possible to save them from lightroom without the original file?

  Your images are not - and have never had - in Lightroom, they are just referenced in the Lightroom database.

  Lightroom generates jpeg previews of the originals, however, and you can export users export preview plugin of Rob Cole: robcole.com - PreviewExporter.

  To be clear, however, that are not originals.

• I should "separate compiled code in the source file" for *.ctl files?

  There are a few good reasons to code compiled separately to screw

  Now, the option is also available for custom orders/type definitions. I wonder if there is any benefit whether for the separation of updating the code of these? None of the reasons for separation will apply to *.ctl files, after all. In fact, it might even be disruptive - in some quick experiments, separation of compiled code has increased the size of the files *.ctl!

  (Transferred to https://lavag.org/topic/19681-should-i-separate-compiled-code-from-source-file-for-ctl-files/ )

  Hi JKSH,

  Good question!  After searching for a bit, the first reason mentioned in the KB, you are connected (to simplify the source code control) looks like it could apply to the .ctl file.

  I guess that similarly to how changes in 1 VI cause unsaved changes in any screws that call it, changes with a .ctl file can do the same thing.  However, it seems that separation of compiled code make it possible only to make changes to a file at a time, without the domino effect.

  Best,

  David Randolph

  Engineering applications

  National Instruments

  www.NI.com/support

• ProjectName - 1.cod in the JAD file

  Hi all:

  I can install my application using the Desktop Manager, and it works well.

  However, when I try to install the application by using OTA, in the jad file, there is a line like this:

  RIM-COD-URL-1: ProjectName - 1.cod

  It has always failed because my cod file is ProjectName.cod, not ProjectName - 1.cod.

  Can someone help me?

  Thank you!

  I suggest that you remove the file jad the directory where it is created by the JDE, then re build yourapplication.  This will force the JDE to rebuild your jad and you will probably find that he decided that your cod hasn't needed a child file from same parents.  From my experience, the JDE does not rebuild (but a few updates) the jad when you recompile.

  What level of JDE do you use?

• are the COD of the CAP files to .java already pre-audit or not?

  My apologies if I don't see something that is obvious to others, but it's not clear to me if the .cod files created Cap running on the .java files are already pre-audit or not.  In the development guide, it says in one place:

  When you build a project by using the BlackBerry® integrated development environment, the IDE BlackBerry compiles your source in bytecode Java® files, performs predetermination from FNIHB and creates a single .cod file and a file .jad to an application from BlackBerry® device.

  and then in another place:

  To reduce the amount of processing the device BlackBerry® performs when you load your device BlackBerry app, partly to check your classes. You can also use the Smartphone BlackBerry® Simulator to preverify .cod files.

  At the command prompt, type:
  Preverify.exe [-d] output input directory - classpath. Directory

  I could imagine review making sense if entries were fichiers.class/.jar of javac instead of the CAP, but that I'm a bit confused by the wording in the development Guide and don't see a definitive answer elsewhere.  As always, my apologies if I missed this - pointer RTFM appreciated.

  It depends on how you use the CAP.  If the entry is java files, then Yes, Cap compiles, preverifies and generates the cod files.  If before you class files or jar, then you have to preverify step before the CAP.

• Html open within the application file

  I created an app (Android and IPad) using Flash (AS3) CS6. Want to open an html file online (http://www.delta-adv.com/roche/form.php) inside the application according to the specific size we will place inside the code. For example, my implementation size is 1024 x 768 and when I press the button, the html file should open within the provision of application with a size of 800 x 600

  Is it possible to do like this?

  It is copied from the adobe class files:

  package {}

  import flash.display.Sprite;

  import flash.html.HTMLLoader;

  import flash.net.URLRequest;

  SerializableAttribute public class HTMLLoaderExample extends Sprite

  {

  public void HTMLLoaderExample()

  {

  var html:HTMLLoader = new HTMLLoader();

  var urlReq:URLRequest = new URLRequest ("http://www.adobe.com/");

  HTML. Width = stage.stageWidth;

  HTML. Height = stage.stageHeight;

  HTML. Load (urlReq);

  addChild (html);

  }

  }

  }

• Compiled code in the source file was separated... when referencing a tat of VI entered a trajectory control

  I have a feeling I know the answer.

  I have an executable that takes a VI from trajectory control and the executable reads certain properties.  It crashes with this error.

  Some experience on the issue:

  The executable waits on path control to change its value, then it reads the properties.  He's just fine.

  Running the source code works very well.

  The VI which is read has separate code.

  So I think it's no different than calling a VI dynamically because it is the responsibility of the VI in memory to read its properties, and that cannot happen if the code is separate.  I guess you have to uncheck the option "Separately compiled Code."... "for every VI (Subvi) I loading and recompile all that and that should work?

  Thank you!

  We will try to clarify something here.  You have an EXE file (running in the TEN) and is trying to call a VI that is not included in the EXE file and make everything with her?  If this is the case, while called VI does NOT have to be defined for separate update.  The reason being that the RTE does not any compilation.  So tried to do something for a VI with no compiled code is impossible.

  In the development environment, the code compiled for VI should be in the cache of the object.  So the separate update is not serious.

• View object instance read cache - from anywhere in the application?

  Hello. All,
  
  This seems to be a difficult question.
  
  I have a table of user information and have defined the subject entity and object view for him. I have also written a method reduceToOneUser which reduces the instance of the view object for that one line, based on user input.
  
  1. they are made, as in the flowchart on page of struts - config.xml, starting the flow by a loginDataPage, who passes to the dataAction_1.
  
  2 dataAction_1 called the reduceToOneUser, which effectively reduces the view to a single line object instance. dataAction_1 is transferred to the dataAction_2.
  
  3. now dataAction_2 is not just before a next node, but must send to one of SEVERAL nodes according to the values of the attributes in the instance of the view object.
  
  And the challenge is here. I know that the instance of the view object is there, the cache is there, but how to get the values of the attributes of the object instance in the cache of the view view when I'm in the DataAction java object? (I created the class of AuthenticationAction by double clicking on the authenticationDA icon in the page flow diagram.)
  
  
  < pre >
  
  package zb.view;
  to import java.util.Enumeration;
  to import javax.servlet.http.HttpServletRequest;
  Import oracle.adf.controller.struts.actions.DataAction;
  Import oracle.adf.controller.struts.actions.DataActionContext;
  Import zb.model.BillViewImpl;
  Import zb.model.ZBModuleImpl;
  
  SerializableAttribute public class AuthenticationAction extends DataAction
  {
  protected void findForward (DataActionContext actionContext) throws Exception
  {
  I can get the user entry OK:
  HttpServletRequest request = actionContext.getHttpServletRequest ();
  The ID of the string (String) = request.getParameter ("id");
  Chain pin (String) = request.getParameter ("pin");
  System.out.println ("ID:" + id + ", PIN:" + pin);
  
  Here the findForward ("toValidate") works fine and passes it to the page that the
  before toValidate points to. But in the logic of my profession, one of the attributes of the view object
  instance must meet certain conditions before the user is forwarded to this page. So I have
  need to get the attributes. - But how?
  actionContext.setActionForward (actionContext.getActionMapping () .findForward ("toValidate"));
  }
  }
  
  < / pre >
  
  
  I am a newbie. My approach here is appropriate? Is there a better way? It is very appreciated if someone can help out me. Thank you very much!
  
  
  
  
  Newman

  Newman,
  Now you have a configuration problem. I told you that the code comes from an earlier version of struts and may not work in your case.
  The good news is that google is your friend :-)

  This document gives an overview on your version adf data binding.

    protected void findForward(DataActionContext ctx) throws Exception {
      /*
       * "EmpService" is the name of the application module
       */
      EmpService svc = (EmpService)ctx.getBindingContext()
                                       .findDataControl("EmpServiceDataControl")
                                       .getDataProvider();
  
          // use the application module as you like ...
    }
  

  The code above show how to get the application module that is associated with a data control (from the doc above).

  Here are a few links: [link1 | http://forums.oracle.com/forums/thread.jspa?messageID=670290򣩒] and [Link2 | http://forums.oracle.com/forums/thread.jspa?messageID=719824򯯐]

  If you like some more try [this research | http://forums.oracle.com/forums/search.jspa?threadID=&q=%2Bdataaction+%2Bapplication+%2Bmodule&objID=f83&dateRange=all&userID=&numResults=15&rankBy=10001]

  Timo

• Time Machine hangs on the Application file that I deleted

  Hello:

  I'm doing a new installation on my parents computer because Flash Player was completely broken somehow. I can't uninstall or update.

  This isn't my problem right away well. Their backup disk was on his last breath so that I had to get a new and Time Machine hangs first various office applications, which I excluded, now it's of iDVD. I tried that it excludes everything first, but Time Machine has always tried to save. Given that my parents don't use it and it is no longer supported then I thought to uninstall. I deleted the program and demand corresponding is support the file and did a search in the Finder for all of the remaining files. No, zip.

  However, Time machine is still backing up files which I can't find for the life of me. He would make iDVD themes 1, 2, 3, etc. I can't exclude in Time Machine because he's not here. I deleted the partial backups each time and it keeps immediately suspended 19,25 GB on iDVD.

  Please, Please help. I spent a ridiculous amount of time is already and should just get this done.

  I look forward to all points of view.

  Thank you

  Justin

  Edit: misspelling.

  Try re-indexing of Spotlight.

  Spotlight - re - index

  Start with A4 in the 1st article linked.

  Troubleshooting of Time Machine

  Solving the problems of Time Machine

  Troubleshooting backup problems

• the application file complete Firefox

  Where can I download a complete, independent firefox application file, not an installation file.

  The installer of Firefox is the comprehensive program, this is the case for all the platforms.
  
  You can download and save the exe file and copy the installer on a USB key.
  
  It's the complete program, so no other files need to be downloaded.

  You may need to install or update the plugins.

  • https://support.Mozilla.org/KB/popular+plugins