FSCM MP9 - cannot retrieve the zip EODS_QUERY_FIX

Hello

I am applying FSCM 9.1 Maintenance Pack 9 on the application of Finance.

Over on estep I need to implement the project, which can be found on EODS_QUERY_FIX. ZIP

"If please locate EODS_QUERY_FIX.zip to upd878541\upd878541_install and manually apply the project to your database'.

I can't extract the zip file.

She is high appreciated if someone can help me to extract or identify the project.

Thank you!

Best regards
Jean-Marc

Hello

I had exactly the same problem yesterday. Since my installation workstation, I was unable to open the zip file but from another PC, I could open it without error, then I copied the archive that I could open up my PC to my workstation installation and still I could not open it... very strange.

The difference between my PC and install it workstation is on my PC, I use 7zip and on the position of the installation, I'm using WinZip.

So I extracted the zip file with 7zip on my PC, then, always on my PC I recreated a new zip file, it transferred to the workstation install and finally I could open it!

Hope this helps

Tags: Oracle Applications

Similar Questions

ORA-01124: cannot retrieve the data file 1 - file is in use or recovery
I'm trying to recover the database in waiting, but it gives the error below.

ORA-00283: cool cancelled due to errors
ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'

When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.

"media recovery has not started.

It seems that the recovery was stuck between the two.
Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.

Thanks in advance.
Dataguard and MRP, you run a script before.

In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

Hemant K Collette

Published by: Hemant K Collette on May 29, 2013 17:47

10gr 2-Sybase15-ORA-28545: cannot retrieve the text of the message from NETWORK/NCR
Hi all

I am trying to establish connectivity between Oracle 10 g 2 (Win XP Pro 2002) and Sybase ASE 15.0.2 (Sun Solaris 5.9) by using the transparent gateway for Sybase (TG4SYBS), but encountered the following error. I have looked for a solution quite well in all directions, but so far have been quite unlucky. This is my last resort. I don't really know what I'm doing wrong as I followed the steps of installation and configuration correctly. Please note:
-Oracle transparent gateway software and database are installed in different homes; and,
-J' created and tested the ODBC DSN connectivity with the Sybase server.

The only thing that I have real concern about is the version of the Sybase server 64-bit OS; Windows Oracle server is 32-bit. Are going to count this could be the problem?

ORA-28545: error diagnosed by Net8 when connecting to an agent
Cannot retrieve the text of the message NETWORK/NCR 65535
ORA-02063: preceding 2 lines of CSSTAT

I am enclosing also any of the configuration system below:

------------------------------------------------------------------------------

Database server
===============

V Windows XP Professional 2002 SP2

Oracle Database 10g Enterprise Edition Release 10.2.0.1.0

Sybase Adaptive Server ODBC Driver 15.00.00.152

C:\ > echo %path%
C:\oracle\product\10.2.0\tg_1\bin; E:\OracleHomes\agent10g\jlib; E:\OracleHomes\ag
ent10g\bin; E:\OracleHomes\oms10g\bin; E:\OracleHomes\oms10g\jlib; C:\Program Files
Company \Business Objects\BusinessObjects 6\bin\orb\asp\6.0\bin. C:\Program Fi
les\Business Objects\BusinessObjects Enterprise 6\bin\orb\bin; C:\Program Files\B
usiness Objects\BusinessObjects Enterprise 6\bin; C:\sybase\DataAccess\OLEDB\dll;
C:\sybase\DataAccess\ODBC\dll; C:\sybase\Shared\Sybase Central 4.3; C:\sybase\OCS-
15_0\lib3p; C:\sybase\OCS-15_0\dll; C:\sybase\OCS-15_0\bin; C:\sybase\JS-12_5\bin; C
: \sybase\ADO.NET\dll; C:\sybase\ODBC; C:\Program WinRAR; C:\Windows\System32;
C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\sybase\DBISQL\bin

------------------------------------------------------------------------------

Sybase server
=============

Er1min01 of SunOS 5.9 Generic_122300-11 sun4u sparc SUNW, Sun-Fire-V440

Adaptive Server Enterprise/15.0.2/EBF 14328, P, Sun_svr4, OS 5.8/ase1502/2486/64-b
IT/FBO/Thursday 24 May 12:18:26 2007

------------------------------------------------------------------------------

Sybase SQL.ini
==============

[MINSAT]
Master = TCP, 192.168.1.150, 5002
Query = TCP, 192.168.1.150, 5002

------------------------------------------------------------------------------

C:\oracle\product\10.2.0\tg_1 > tg4sybs

Oracle Corporation - WEDNESDAY SEP 23 2009 02:43:29.406

Heterogeneous Agent Release 10.2.0.1.0 - Production built with
Driver for SYBASE

------------------------------------------------------------------------------

inittg4sybs.ora
===============

# This is an example of initialization file of the agent that contains the HS settings
# needed for the transparent gateway for Sybase

#
# HS init parameters
#
HS_FDS_CONNECT_INFO = MINSAT.csstat
HS_FDS_TRACE_LEVEL = OFF
HS_FDS_RECOVERY_ACCOUNT = RECOVERY
HS_FDS_RECOVERY_PWD = RECOVERY
#HS_FDS_TRANSACTION_MODEL = READ_ONLY

#
# Required for Sybase environment variables
#
SYBASE the value = "C:\\sybase".

------------------------------------------------------------------------------

Listener.ora
============

listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.

SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(= Extproc PROGRAM)
)
(SID_DESC =
(SID_NAME = csstat)
(ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
(PROGRAM = tg4sybs)
)
)

LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
)
)

SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF

------------------------------------------------------------------------------

tnsnames.ora
============

tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.

TEMP =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TEMP)
)
)

csstat =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.123.49)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = csstat)
)
(HS = OK)
)

EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)

------------------------------------------------------------------------------

C:\oracle\product\10.2.0\db_1\BIN > lsnrctl status CSSTAT

LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-SEP-2009 02:47
: 10

Copyright (c) 1991, 2005, Oracle. All rights reserved.

Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.123.49) (PORT = 152
((1)) (CONNECT_DATA = (Server = Dedicated) (service_name = csstat))(HS=OK))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
ction
Start date 23 - SEP - 2009 01:48:54
Uptime 0 days 0 h 58 min 16 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
RA
Listener log file C:\oracle\product\10.2.0\db_1\network\log\listener.log

Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=FH) (PORT = 1521)))
Summary of services...
Service 'OEMREP_XPT' has 1 instance (s).
'Oemrep' instance, State LOAN, has 1 operation for this service...
Service 'PLSExtProc' has 1 instance (s).
Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
Service 'TEMPXDB' has 1 instance (s).
Instance 'temp', State LOAN, has 1 operation for this service...
Service 'TEMP_XPT' has 1 instance (s).
Instance 'temp', State LOAN, has 1 operation for this service...
Service 'csstat' has 1 instance (s).
Instance of 'csstat', status UNKNOWN, has 1 operation for this service...
Service 'oemrep' has 1 instance (s).
'Oemrep' instance, State LOAN, has 1 operation for this service...
'Temp' service has 1 instance (s).
Instance 'temp', State LOAN, has 1 operation for this service...
The command completed successfully

------------------------------------------------------------------------------

C:\oracle\product\10.2.0\db_1\BIN > tnsping CSSTAT

AMT Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production 23-SEP-2
009 02:48:12

Copyright (c) 1997, 2005, Oracle. All rights reserved.

Use settings files:
C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora

TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.
123.49)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = cssta
(t)) (t)) (HS = OK))
OK (20 ms)

------------------------------------------------------------------------------

SQL > create database link csstat connect to the 'fw' identified by ' * ' using 'csstat ';

Database link created.

------------------------------------------------------------------------------

SQL > select * from sys.hs_fds_class;

FDS_CLASS_NAME
FDS_CLASS_COMMENTS
FDS_CLASS_ID

BITE
Integrated Test environment
1

------------------------------------------------------------------------------

SQL > show parameter global_names;

VALUE OF TYPE NAME
global_names boolean FALSE

------------------------------------------------------------------------------

SQL > select * from SIMSwap@csstat;
Select * from SIMSwap@csstat
*
ERROR on line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Cannot retrieve the text of the message NETWORK/NCR 65535
ORA-02063: preceding 2 lines of CSSTAT

------------------------------------------------------------------------------
you use the Oracle Listener database in C:\oracle\product\10.2.0\db_1\ to spawn TG4SYBS installed in a different House: C:\oracle\product\10.2.0\tg_1. This works when you specify the full path in the listener.ora to tg4sybs executable file. The section of SID might look like:
(SID_DESC =
(SID_NAME = csstat)
(ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
(PROGRAM = C:\oracle\product\10.2.0\tg_1\tg4sybs)
)

Then STOP and START the listener and try again.

Cannot retrieve the Portege R100 by using the recovery CD

I replaced the HARD drive on my R100 not having the original. Thank you to help on the forum, I managed to solve a CDROM with a PCMCIA connector.

I got through the recovery screen and choose option 1 - retrieve the entire disk. He got a disc of part way through 1 when he did not play a file. I then ran it again, but the selected option 2 - Toshiba Recovery utility and it started and then failed with the error - "cannot open TOSH_REC. COMMITTED AN ERROR."

Where else?

Thank you

Ian

Hello

Have you replaced it with all new HARD drive? It's very strange question and if the HARD drive is nine something like that shouldn't happen. You have the FDD to check the HDD with FDISC? Please use the floppy drive and boot the disk to check the new HARD drive.

Somehow, I feel that there is something wrong with this new HARD drive.

Mavericks 10.9.1 with Fusion 5.0.4 cannot retrieve the kernel symbols

I used my VM yesterday and opened my laptop today for the following errors.
Failed to retrieve the kernel symbols
Failed to initialize the device monitor
Cannot find a valid peer to connect to

Here are the steps of troubleshooting, I found other posts.
uname - a
Darwin private-mbp-2 13.0.0 Darwin Kernel Version 13.0.0: Sun Sep 19 22:22:27 CDT 2013; root:XNU-2422.1.72~6/RELEASE_X86_64 x86_64
system_profiler SPSoftwareDataType
Software:
Presentation of the system software:
The system version: OS X 10.9.1 (B 13, 42)
Kernel version: 13.0.0 Darwin
Boot volume: Macintosh HD
Boot Mode: Normal
Name of the computer: MacBook Pro of Rob
Username: Rob
Ensure the virtual memory: enabled
Since the start time: 05:25
ls-l /mach_kernel

-rwxr-xr-x @ 1 root wheel 0 18 Feb 09:35 /mach_kernel

I noticed that the mach_kernel was missing and I touch /mach_kernel.

Any suggestions on how to get this working again?

beyonder74 wrote: How do I replace the mach_kernel file?

If you use Time Machine you could restore it from there, but you will first need to use the following command in a Terminal to show hidden system files. Tip: Copy and paste the commands vs type!

write QLEnableXRayFolders AppleShowAllFiles TRUE; Killall Finder

Then, go to Time Machine and restore it and use later...

write QLEnableXRayFolders AppleShowAllFiles FALSE; Killall Finder

To hide hidden system files.

If you do not use the Time Machine , normally we can (re) install the latest Combo update to restore it but there wasn't one, but for OS X 10.9 Mavericks so you'll need to get a copy of another OS X 10.9.0 or 10.9.1 install as it is the same in both.

Worst case scenario, take a look on: OS X Mavericks: reinstall OS X

Cannot retrieve the Satellite to factory settings after installing Win XP

I was running windows recovery then I chose 'delete all data... '. "something like that.
Then in the Middle by mistake I turned off the system.

After that, I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

I tried pressing the "F8" key and also the '0' key when the computer starts to "toshiba" logo but it is still not send me any option to get my computer back to windows vista or you can say "out of the box.

One important thing is, while installing windows XP its show me this HARD drive recovery exist and 973 MB is free off 5665 MB. This means that I have still all windows and the drivers on the HARD drive. Now please help to return normal system recovery or BOX STATE.

> After I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

The installation of Win XP has damage and remove the Boot Manager and options preinstalled by Toshiba and backed by Toshiba picture.

This means that if you will be unable to retrieve the device using the drive HARD recovery option.

You could retrieve the device back to factory settings using only the Toshiba recovery disc! But I guess that you didn't create this disk is good?

Well, in this case, you can order this disc from here:
https://backupmedia.Toshiba.EU/landing.aspx

Welcome them

Cannot extract the zipped files

I can't extract the zipped files. An audio file on my desktop as one. MP3.zip file, and when I right click on it, there is no option to extract the file. I have compressed folders that contain pictures and tried to unzip them without success. There is no option in the menu "right click" to extract the selected file. My windows lack extraction or unzipping option? Help, please!

Hello

Maybe the file is not a real. ZIP file - try to download another. ZIP and save it - so go ahead and
Click right on and see if there is an option/unzip Unzip (unpack). If yes then you must check with
the site where you got the. MP3.zip file to see how to handle. Maybe rename it to filename.mp3
HOWEVER filename.zip will work.

Download this small utility which is very convenient and comes in. ZIP format just to see if your. ZIP functions
actually work. You can keep the utility or delete, it requires no installation and is very low.

What is there in the Startup - free
http://www.NirSoft.NET/utils/what_run_in_startup.html

Download - SAVE - go where you put it - right click on and search for decompress/unzip options.

==================================

IF you have ZIP 3 1 problem here you should fix it up:

How to restore Vista built-in ZIP files Support
http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html
How to enable or disable the files compressed in Vista
http://www.Vistax64.com/tutorials/93827-zip-file-compressed-folders.html
Restore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

---------------------------------

How Unassociate a Type of Extension file in Vista - and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
Restore and return the file Association in Windows Vista if Original
http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/

Reset and Fix Broken Windows Vista file Ext and Type Associations (include EXE, COM, SYS, ZIP, LNK,
Folder, drive)
http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-Windows-Vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/

For Windows Vista file association problems
http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Cannot retrieve the songs to a cd error "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. »

Oriiginal title: can not extract the songs from a cd

I have problems ripping the songs from a cd in my windows media player library. Whenever I click "Rip CD" this message "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. "How can I fix it?

Hi littleprincess54,

(1) have you checked with diffΘrents CDs?

(2) since when are you facing this problem?

Method 1: Run the troubleshooter in Windows Media Player settings and check if that makes a difference

Open the troubleshooting Windows Media Player settings Troubleshooter

http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

Method 2: Change the location of Rip. see the steps mentioned in the link

To change rip settings in the Options dialog box

Method 3: You can follow the steps mentioned in the link below that relates to a similar question

Windows Media Player error C00D1197

http://Windows.Microsoft.com/en-us/Windows7/C00D1197

Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think.

Dell v715w - cannot retrieve the application list from your computer

I have a new desktop WIN7 64 bit Voastro (replaced a dimension on XP) I can't use the printer control panel to scan. I get is unable to retrieve the list of applications on your computer on the screen of the printer.

Have reinstalled the printer at least 3 times now with different downloaded drivers from the original printer disk

I've seen a lot of posts on here for similar problems, but none seems to have a definitive solutiuon for this problem.

Any help much appreciated!

Thank you - sdgconc

Hello

Thanks for the reply.

Please disable the firewall on the computer and check if the printer works fine.

If parsing is successful after you turn off the firewall, please add printer Dell as an exception to the firewall.

If the search was unsuccessful, please follow the steps below:

Click Start > Control Panel > devices and printer > printer right click and select Properties.

Select the Ports tab in the printer properties window, and then configure the Port.

Printer IP appears in the Port configuration window.

Enter the printer's IP address in the browser to log on to the website of the printer.

Click on Configuration and management of home network analysis.

Then click on start > all programs > Dell printers > the home printer settings tab > network computer name.

Remove the scan to PC host.

Please let me know if you use printer wireless or USB cable.

In case you use wireless printer, try it please I scan a document with the printer connected via USB cable.

Thank you & best regards
Mustapha S
#iworkfordell

im making a responsive Web page files you learned you are needed is .zip files. When I go to open them on dreamweaver it says that it cannot open the .zip, they must be .html etc... What should I do?

I need to make a web page with javascript pop ups. If someone could tell me the best program that would be great. Thank you.

Dreamweaver is a glorified text editor, in other words, you are able to handle files containing text. Text files can come in a variety of variations, variations that Dreamweaver handles are extremely good HTML, CSS and JS files and to a lesser extent, the PHP files.

Zip files are not text files, they are compressed files which make the transport and archiving or more effective. See her Zip (file format) - Wikipedia, the free encyclopedia. For the file that will be used by Dreamweaver, you will need to decompress the zip file.

If you want to easily create a page with modals (the modern version of a popup) then I suggest that you create a site using the Bootstrap framework. Modals (and demo) Bootstrap. Modals are

Cannot retrieve the data by binary storage by default for XML 11 g
Oracle 11.2

All,

As someone mentioned in another post, I got I should use binary XMLType CLOB rather than 11g because it is more efficient. When I create the XMLType column as binary I can't retrieve the value of the column, but when I use CLOB I am able to extract data on.

-Create table with XMLTYPE column. Since it is 11.2 storage of the column is automatically binary
CREATE THE TABLE HR. XMLTABLESTORE (key_id VARCHAR2 (10) PRIMARY KEY, xmlloaddate date, xml_column XMLTYPE);

-Insert the XML into the XML column
INSERT INTO HUMAN RESOURCES. VALUES XMLTABLESTORE (HR. XMLSEQUENCE. NEXTVAL, SYSDATE, XMLType (bfilename ('XMLDIRX', 'PROD_20110725_211550427_220b.xml'),
nls_charset_id ('AL32UTF8'))); COMMIT;

-When I do a select I see full XML in the xml_column column
SELECT * FROM HR. XMLTABLESTORE

-When I run the following query I get the following:
SELECT extract (xml_column, ' / / MapItem/@ProductNum') ProductNum OF HR. XMLTABLESTORE

ProductNum
-------------
XMLType

-When I run the following query on the @, I get the following:
SELECT extract (xml_column, ' / / MapItem/ProductNum ') ProductNum OF HR. XMLTABLESTORE

ProductNum
-------------
Null value

When I run the same SELECT query retrieves (xml_column, ' / / MapItem/@ProductNum') ProductNum OF HR. XMLTABLESTORE and the table is created by CLOB, I get out the expected value of the XML file.

How can I get the query to retrieve the data through a binary file?

I appreciate any help in advance.

Thank you
Shawn

Published by: 886184 on Sep 20, 2011 15:42
Probably a problem with your client tool.

It works for me:
```
SQL*Plus: Release 11.2.0.2.0 Beta on Mer. Sept. 21 19:39:55 2011

Copyright (c) 1982, 2010, Oracle.  All rights reserved.

Connected to:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Beta

SQL> CREATE TABLE xmltablestore (
  2    key_id VARCHAR2(10) PRIMARY KEY
  3  , xmlloaddate DATE
  4  , xml_column XMLTYPE
  5  );

Table created.

SQL> INSERT INTO xmltablestore
  2  VALUES ('1', sysdate, XMLType(bfilename('TEST_DIR', 'PROD_20110725_211550427_220b.xml'),nls_charset_id('AL32UTF8')))
  3  ;

1 row created.

SQL> commit;

Commit complete.

SQL> SELECT extract(xml_column, '//MapItem/@ProductNum') ProductNum
  2  FROM xmltablestore
  3  ;

PRODUCTNUM
--------------------------------------------------------------------------------
63481062975

SQL> SELECT extractValue(xml_column, '//MapItem/@ProductNum') ProductNum
  2  FROM xmltablestore
  3  ;

PRODUCTNUM
--------------------------------------------------------------------------------
63481062975

SQL> SELECT xmlcast(
  2          xmlquery('/Entries/Category/MapItem/@ProductNum'
  3           passing t.xml_column
  4           returning content
  5          )
  6          as number
  7         ) ProductNum
  8  FROM xmltablestore t
  9  ;

PRODUCTNUM
----------
6,3481E+10

SQL> SELECT xmlcast(
  2          xmlquery('/Entries/Category/MapItem/@ProductNum'
  3           passing t.xml_column
  4           returning content
  5          )
  6          as varchar2(30)
  7         ) ProductNum
  8  FROM xmltablestore t
  9  ;

PRODUCTNUM
------------------------------
63481062975
```
BTW, extract and extractvalue functions are deprecated in version 11.2.
Oracle now recommends using XMLCast/XMLQuery.

Software Adobe reader cannot retrieve the police incorporated after pdf sent via outlook

We have some pdf files that open in Adobe Reader 9.1.3 fine. Once send us them by email (we use Outlook 2003), they won't be open not correctly with the error message: "impossible to extract the embedded police ' TWDWSP + TradeGothic-light." Some characters may not display or print correctly. "When we click OK, an error message is displayed:"there is an error on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem. "If files are sent in a ZIP archive, they will open correctly, but does not individually if sent in PDF format. Can anyone help?

It's a problem with the pdf file encoded in ascii email program when it is really binary. The way around this problem is the zip file or use a different e-mail program or to change the method of encoding if possible.

Trigger cannot retrieve the user
Hello

I am trying to retrieve the current user to double to fill in a created_by at my new table column. Unfortunatelly the value I receive in the trigger is "ANONYMOUS". When I execute the same statement on the SQL command line, I get the correct value, which is the ADM user, I created in order to develop my application.

TKS in advance
Hello

If you like having Apex application user name use below button
```
v('APP_USER')
```
BR, Jari

Upgrade to 11g - DBUA cannot retrieve the version
Hello

I'm upgrading to 10.2.0.4 11.2.0.2 version and I have problem at the beginning.

Immediately after the beginning of DBUA in the I get the error that the version of the database can ' be retrieved. Somewhere in the logs I found:

connect / * as SYSDBA
trigger the echo;
@/ u01/app/oracle/OracleHomes/db11g/rdbms/admin/rdbmsup.sql.

exactly at this moment I have understanding problem.

It seems that the new software wants to connect to the instance and cannot. What should I do to enable him to do this? I started the new(11g) listener and it is possible to connect to the previous instance of 10 g, but the old instance runs in the old House. I can connect to it, but I have to use the tnsname 'emrep '. Without using the tnsname, it connects to the instance of idle.

SQL > conn / as sysdba
Connect to an instance is idle.
SQL > conn sys@emrep as sysdba
Enter the password:
Connected.

Without doubt, I made a mistake while configuring the listener, but I can't find any indication in this sense. In all the places where I'm looking, I see only: "create new listener using netca and add the database in the database for this listener Services tab using netmgr." In fact there is no need to do the last because tha database uses the default port 1521.
If I do just that, the I get in $ORACLE_HOME/networt/admin folder listener.ora only with the following content:

listener.ora # Network Configuration file: /u01/app/oracle/OracleHomes/db11g/network/admin/listener.ora
# Generated by Oracle configuration tools.

LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = mmredora.aegon - net)(PORT = 1521) .to)
)

ADR_BASE_LISTENER = / u01/app/oracle

After that, I see the database that is registered with the listener:
[oracle@mmredora-SID:emrep] $ lsnrctl status

LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-AUG-2011 15:38:23

Copyright (c) 1991, 2009, Oracle. All rights reserved.

Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = mmredora.aegon - net)(PORT=1521) .to))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date 27 - SEP - 2011 15:34:19
Uptime 0 days 0 h 4 min 3 s
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/OracleHomes/db11g/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/mmredora/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = mmredora.aegon - net)(PORT=1521) .to))
Summary of services...
Service 'emrep' has 1 instance (s).
'Emrep' instance, State LOAN, has 1 operation for this service...
The command completed successfully

Can someone help me with this?
Can you please review the MOS Doc below

11 GR 2 DBUA stipulates 'the POC file does not have the version directive' (Doc ID 980693.1)

Cannot open the zip file with windows vista causes flashes when right click on the mouse

When I try to open pictures sent on Zip file by right-clicking mouse screen starts blinking non-stop. Having to stop to computer. Windows vista ultimate operating system.

Thank you

Raymond

See the thread is if it helps:

IE8 crashes when opening zip files
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/zip-files-IE8-crashes-when-opening/f91ee0fd-99A5-4993-AC37-a0c461dc9b9b

FSCM MP9 - cannot retrieve the zip EODS_QUERY_FIX

Similar Questions

Maybe you are looking for