Cannot retrieve the Portege R100 by using the recovery CD

Similar Questions

• ORA-01124: cannot retrieve the data file 1 - file is in use or recovery

  I'm trying to recover the database in waiting, but it gives the error below.
  
  ORA-00283: cool cancelled due to errors
  ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
  ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'
  
  When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.
  
  "media recovery has not started.
  
  It seems that the recovery was stuck between the two.
  Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.
  
  Thanks in advance.

  Dataguard and MRP, you run a script before.

  In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

  In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

  Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

  What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
  Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

  Hemant K Collette

  Published by: Hemant K Collette on May 29, 2013 17:47

• 10gr 2-Sybase15-ORA-28545: cannot retrieve the text of the message from NETWORK/NCR

  Hi all
  
  I am trying to establish connectivity between Oracle 10 g 2 (Win XP Pro 2002) and Sybase ASE 15.0.2 (Sun Solaris 5.9) by using the transparent gateway for Sybase (TG4SYBS), but encountered the following error. I have looked for a solution quite well in all directions, but so far have been quite unlucky. This is my last resort. I don't really know what I'm doing wrong as I followed the steps of installation and configuration correctly. Please note:
  -Oracle transparent gateway software and database are installed in different homes; and,
  -J' created and tested the ODBC DSN connectivity with the Sybase server.
  
  The only thing that I have real concern about is the version of the Sybase server 64-bit OS; Windows Oracle server is 32-bit. Are going to count this could be the problem?
  
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of CSSTAT
  
  
  I am enclosing also any of the configuration system below:
  
  ------------------------------------------------------------------------------
  
  Database server
  ===============
  
  V Windows XP Professional 2002 SP2
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  
  Sybase Adaptive Server ODBC Driver 15.00.00.152
  
  
  C:\ > echo %path%
  C:\oracle\product\10.2.0\tg_1\bin; E:\OracleHomes\agent10g\jlib; E:\OracleHomes\ag
  ent10g\bin; E:\OracleHomes\oms10g\bin; E:\OracleHomes\oms10g\jlib; C:\Program Files
  Company \Business Objects\BusinessObjects 6\bin\orb\asp\6.0\bin. C:\Program Fi
  les\Business Objects\BusinessObjects Enterprise 6\bin\orb\bin; C:\Program Files\B
  usiness Objects\BusinessObjects Enterprise 6\bin; C:\sybase\DataAccess\OLEDB\dll;
  C:\sybase\DataAccess\ODBC\dll; C:\sybase\Shared\Sybase Central 4.3; C:\sybase\OCS-
  15_0\lib3p; C:\sybase\OCS-15_0\dll; C:\sybase\OCS-15_0\bin; C:\sybase\JS-12_5\bin; C
  : \sybase\ADO.NET\dll; C:\sybase\ODBC; C:\Program WinRAR; C:\Windows\System32;
  C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\sybase\DBISQL\bin
  
  ------------------------------------------------------------------------------
  
  Sybase server
  =============
  
  Er1min01 of SunOS 5.9 Generic_122300-11 sun4u sparc SUNW, Sun-Fire-V440
  
  Adaptive Server Enterprise/15.0.2/EBF 14328, P, Sun_svr4, OS 5.8/ase1502/2486/64-b
  IT/FBO/Thursday 24 May 12:18:26 2007
  
  ------------------------------------------------------------------------------
  
  Sybase SQL.ini
  ==============
  
  [MINSAT]
  Master = TCP, 192.168.1.150, 5002
  Query = TCP, 192.168.1.150, 5002
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\tg_1 > tg4sybs
  
  Oracle Corporation - WEDNESDAY SEP 23 2009 02:43:29.406
  
  Heterogeneous Agent Release 10.2.0.1.0 - Production built with
  Driver for SYBASE
  
  ------------------------------------------------------------------------------
  
  inittg4sybs.ora
  ===============
  
  # This is an example of initialization file of the agent that contains the HS settings
  # needed for the transparent gateway for Sybase
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = MINSAT.csstat
  HS_FDS_TRACE_LEVEL = OFF
  HS_FDS_RECOVERY_ACCOUNT = RECOVERY
  HS_FDS_RECOVERY_PWD = RECOVERY
  #HS_FDS_TRANSACTION_MODEL = READ_ONLY
  
  #
  # Required for Sybase environment variables
  #
  SYBASE the value = "C:\\sybase".
  
  ------------------------------------------------------------------------------
  
  Listener.ora
  ============
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = csstat)
  (ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
  (PROGRAM = tg4sybs)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
  )
  )
  
  SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF
  
  ------------------------------------------------------------------------------
  
  tnsnames.ora
  ============
  
  tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  TEMP =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = TEMP)
  )
  )
  
  csstat =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.123.49)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = csstat)
  )
  (HS = OK)
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\db_1\BIN > lsnrctl status CSSTAT
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-SEP-2009 02:47
  : 10
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.123.49) (PORT = 152
  ((1)) (CONNECT_DATA = (Server = Dedicated) (service_name = csstat))(HS=OK))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
  ction
  Start date 23 - SEP - 2009 01:48:54
  Uptime 0 days 0 h 58 min 16 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
  RA
  Listener log file C:\oracle\product\10.2.0\db_1\network\log\listener.log
  
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=FH) (PORT = 1521)))
  Summary of services...
  Service 'OEMREP_XPT' has 1 instance (s).
  'Oemrep' instance, State LOAN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'TEMPXDB' has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  Service 'TEMP_XPT' has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  Service 'csstat' has 1 instance (s).
  Instance of 'csstat', status UNKNOWN, has 1 operation for this service...
  Service 'oemrep' has 1 instance (s).
  'Oemrep' instance, State LOAN, has 1 operation for this service...
  'Temp' service has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  The command completed successfully
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\db_1\BIN > tnsping CSSTAT
  
  AMT Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production 23-SEP-2
  009 02:48:12
  
  Copyright (c) 1997, 2005, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.
  123.49)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = cssta
  (t)) (t)) (HS = OK))
  OK (20 ms)
  
  ------------------------------------------------------------------------------
  
  SQL > create database link csstat connect to the 'fw' identified by ' * ' using 'csstat ';
  
  Database link created.
  
  ------------------------------------------------------------------------------
  
  SQL > select * from sys.hs_fds_class;
  
  FDS_CLASS_NAME
  FDS_CLASS_COMMENTS
  FDS_CLASS_ID
  
  BITE
  Integrated Test environment
  1
  
  ------------------------------------------------------------------------------
  
  SQL > show parameter global_names;
  
  VALUE OF TYPE NAME
  global_names boolean FALSE
  
  ------------------------------------------------------------------------------
  
  SQL > select * from SIMSwap@csstat;
  Select * from SIMSwap@csstat
  *
  ERROR on line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of CSSTAT
  
  ------------------------------------------------------------------------------

  you use the Oracle Listener database in C:\oracle\product\10.2.0\db_1\ to spawn TG4SYBS installed in a different House: C:\oracle\product\10.2.0\tg_1. This works when you specify the full path in the listener.ora to tg4sybs executable file. The section of SID might look like:
  (SID_DESC =
  (SID_NAME = csstat)
  (ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
  (PROGRAM = C:\oracle\product\10.2.0\tg_1\tg4sybs)
  )

  Then STOP and START the listener and try again.

• Mavericks 10.9.1 with Fusion 5.0.4 cannot retrieve the kernel symbols

  I used my VM yesterday and opened my laptop today for the following errors.

  Failed to retrieve the kernel symbols

  Failed to initialize the device monitor

  Cannot find a valid peer to connect to

  
  

  Here are the steps of troubleshooting, I found other posts.
  

  uname - a

  Darwin private-mbp-2 13.0.0 Darwin Kernel Version 13.0.0: Sun Sep 19 22:22:27 CDT 2013; root:XNU-2422.1.72~6/RELEASE_X86_64 x86_64

  system_profiler SPSoftwareDataType

  Software:

  Presentation of the system software:

  The system version: OS X 10.9.1 (B 13, 42)

  Kernel version: 13.0.0 Darwin

  Boot volume: Macintosh HD

  Boot Mode: Normal

  Name of the computer: MacBook Pro of Rob

  Username: Rob

  Ensure the virtual memory: enabled

  Since the start time: 05:25

  ls-l /mach_kernel

  
  

  -rwxr-xr-x @ 1 root wheel 0 18 Feb 09:35 /mach_kernel

  
  

  I noticed that the mach_kernel was missing and I touch /mach_kernel.

  
  

  Any suggestions on how to get this working again?
  

  beyonder74 wrote: How do I replace the mach_kernel file?

  If you use Time Machine you could restore it from there, but you will first need to use the following command in a Terminal to show hidden system files.  Tip: Copy and paste the commands vs type!

  write QLEnableXRayFolders AppleShowAllFiles TRUE; Killall Finder

  Then, go to Time Machine and restore it and use later...

  write QLEnableXRayFolders AppleShowAllFiles FALSE; Killall Finder

  To hide hidden system files.

  If you do not use the Time Machine , normally we can (re) install the latest Combo update to restore it but there wasn't one, but for OS X 10.9 Mavericks so you'll need to get a copy of another OS X 10.9.0 or 10.9.1 install as it is the same in both.

  Worst case scenario, take a look on: OS X Mavericks: reinstall OS X

• Cannot retrieve the Satellite to factory settings after installing Win XP

  I was running windows recovery then I chose 'delete all data... '. "something like that.
  Then in the Middle by mistake I turned off the system.

  After that, I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  I tried pressing the "F8" key and also the '0' key when the computer starts to "toshiba" logo but it is still not send me any option to get my computer back to windows vista or you can say "out of the box.

  One important thing is, while installing windows XP its show me this HARD drive recovery exist and 973 MB is free off 5665 MB. This means that I have still all windows and the drivers on the HARD drive. Now please help to return normal system recovery or BOX STATE.

  > After I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  The installation of Win XP has damage and remove the Boot Manager and options preinstalled by Toshiba and backed by Toshiba picture.

  This means that if you will be unable to retrieve the device using the drive HARD recovery option.

  You could retrieve the device back to factory settings using only the Toshiba recovery disc! But I guess that you didn't create this disk is good?

  Well, in this case, you can order this disc from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Dell v715w - cannot retrieve the application list from your computer

  I have a new desktop WIN7 64 bit Voastro (replaced a dimension on XP) I can't use the printer control panel to scan.  I get is unable to retrieve the list of applications on your computer on the screen of the printer.

  Have reinstalled the printer at least 3 times now with different downloaded drivers from the original printer disk

  I've seen a lot of posts on here for similar problems, but none seems to have a definitive solutiuon for this problem.

  Any help much appreciated!

  Thank you - sdgconc

  Hello

  Thanks for the reply.

  Please disable the firewall on the computer and check if the printer works fine.

  If parsing is successful after you turn off the firewall, please add printer Dell as an exception to the firewall.

  If the search was unsuccessful, please follow the steps below:

  Click Start > Control Panel > devices and printer > printer right click and select Properties.

  

  Select the Ports tab in the printer properties window, and then configure the Port.

  Printer IP appears in the Port configuration window.

  

  Enter the printer's IP address in the browser to log on to the website of the printer.
   
  Click on Configuration and management of home network analysis.

  Then click on start > all programs > Dell printers > the home printer settings tab > network computer name.

  

  

  Remove the scan to PC host.

  

  Please let me know if you use printer wireless or USB cable.

  In case you use wireless printer, try it please I scan a document with the printer connected via USB cable.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Cannot retrieve the data by binary storage by default for XML 11 g

  Oracle 11.2
  
  All,
  
  As someone mentioned in another post, I got I should use binary XMLType CLOB rather than 11g because it is more efficient. When I create the XMLType column as binary I can't retrieve the value of the column, but when I use CLOB I am able to extract data on.
  
  -Create table with XMLTYPE column.  Since it is 11.2 storage of the column is automatically binary
  CREATE THE TABLE HR. XMLTABLESTORE (key_id VARCHAR2 (10) PRIMARY KEY, xmlloaddate date, xml_column XMLTYPE);
  
  -Insert the XML into the XML column
  INSERT INTO HUMAN RESOURCES. VALUES XMLTABLESTORE (HR. XMLSEQUENCE. NEXTVAL, SYSDATE, XMLType (bfilename ('XMLDIRX', 'PROD_20110725_211550427_220b.xml'),
  nls_charset_id ('AL32UTF8'))); COMMIT;
  
  -When I do a select I see full XML in the xml_column column
  SELECT * FROM HR. XMLTABLESTORE
  
  -When I run the following query I get the following:
  SELECT extract (xml_column, ' / / MapItem/@ProductNum') ProductNum OF HR. XMLTABLESTORE
  
  ProductNum
  -------------
  XMLType
  
  -When I run the following query on the @, I get the following:
  SELECT extract (xml_column, ' / / MapItem/ProductNum ') ProductNum OF HR. XMLTABLESTORE
  
  ProductNum
  -------------
  Null value
  
  When I run the same SELECT query retrieves (xml_column, ' / / MapItem/@ProductNum') ProductNum OF HR. XMLTABLESTORE and the table is created by CLOB, I get out the expected value of the XML file.
  
  How can I get the query to retrieve the data through a binary file?
  
  I appreciate any help in advance.
  
  Thank you
  Shawn
  
  Published by: 886184 on Sep 20, 2011 15:42

  Probably a problem with your client tool.

  It works for me:

  SQL*Plus: Release 11.2.0.2.0 Beta on Mer. Sept. 21 19:39:55 2011
  
  Copyright (c) 1982, 2010, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Express Edition Release 11.2.0.2.0 - Beta
  
  SQL> CREATE TABLE xmltablestore (
    2    key_id VARCHAR2(10) PRIMARY KEY
    3  , xmlloaddate DATE
    4  , xml_column XMLTYPE
    5  );
  
  Table created.
  
  SQL> INSERT INTO xmltablestore
    2  VALUES ('1', sysdate, XMLType(bfilename('TEST_DIR', 'PROD_20110725_211550427_220b.xml'),nls_charset_id('AL32UTF8')))
    3  ;
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> SELECT extract(xml_column, '//MapItem/@ProductNum') ProductNum
    2  FROM xmltablestore
    3  ;
  
  PRODUCTNUM
  --------------------------------------------------------------------------------
  63481062975
  
  SQL> SELECT extractValue(xml_column, '//MapItem/@ProductNum') ProductNum
    2  FROM xmltablestore
    3  ;
  
  PRODUCTNUM
  --------------------------------------------------------------------------------
  63481062975
  
  SQL> SELECT xmlcast(
    2          xmlquery('/Entries/Category/MapItem/@ProductNum'
    3           passing t.xml_column
    4           returning content
    5          )
    6          as number
    7         ) ProductNum
    8  FROM xmltablestore t
    9  ;
  
  PRODUCTNUM
  ----------
  6,3481E+10
  
  SQL> SELECT xmlcast(
    2          xmlquery('/Entries/Category/MapItem/@ProductNum'
    3           passing t.xml_column
    4           returning content
    5          )
    6          as varchar2(30)
    7         ) ProductNum
    8  FROM xmltablestore t
    9  ;
  
  PRODUCTNUM
  ------------------------------
  63481062975
  

  BTW, extract and extractvalue functions are deprecated in version 11.2.
  Oracle now recommends using XMLCast/XMLQuery.

• Trigger cannot retrieve the user

  Hello
  
  I am trying to retrieve the current user to double to fill in a created_by at my new table column. Unfortunatelly the value I receive in the trigger is "ANONYMOUS". When I execute the same statement on the SQL command line, I get the correct value, which is the ADM user, I created in order to develop my application.
  
  TKS in advance

  Hello

  If you like having Apex application user name use below button

  v('APP_USER')
  

  BR, Jari

• Cannot retrieve the Satellite C855D-15W with recovery DVDs

  Because of the issue, had to do a factory reset.
  Laptop came with preinstalled Win 8.

  Order recovery of Arvato media.

  In vain several times tried to recover the laptop using the discs. Same problem occurs: -.

  complete partition initialization
  * "Copying files please wait" 1.5 to 2 hours "
  * "An error has occurred.
  error: 0002
  Copy image error
  Please press OK to shut down the computer.

  Now the HARD drive is completely removed.
  Suspect the recovery media and asked for replacement.

  Any help / settings would be appreciated.

  Thank you
  concerning
  Piping Plover

  Hello

  In my opinion, there are two reasons that can explain why the recovery procedure fails.

  (1) failure of HARD drive
  (2) failure of the recovery disc

  I think you should first check if the disk HARD isn t the troublemaker.
  Go to BIOS (F2) and check if the HARD drive is listed on the first page of the BIOS.
  In case it is, the HARD drive may be OK

  In this case, the recovery disc may be defective.
  In this case, you should get in contact with the provider/supplier (Arvato) disk for the new medium.

• Cannot retrieve the Satellite P200-123 - IMAGEX error message

  Hello

  I HAVE A LAPTOP TOSHIBA P200-123 AND I AM DOING A RECOVERY, BUT FOR SOME REASON, IT IS ABOUT 19 TO 26% AND THEN RETURNS WITH AN ERROR SAYING THAT IT COULD
  IS NOT APPLICABLE TO IMAGEX AND I'M AT A LOSE WHAT TO DO.

  IS THERE ANYONE WHO CAN HELP ME WITH THIS PROBLEM.

  Hello Erin

  It is not easy to say why this happens because this error message occurs for different issues.
  One thing can be the reason for this.

  If I well remember when you start the recovery option it must be key SETUP (next step after the confirmation of the language). Maybe you're trying to use installation option OS on the existing partition).
  I tested it a long time ago, and I can confirm that this will not work. What is happening is very strange.
  What is happening, it's a procedure facility trying to install the OS on partition WinRE (Vista). This partition is 1.5 GB only and after 20 or 30% facilities simply stops.
  Maybe you try to do this. I do not know.

  Try using the installation of recovery with the default settings. Don't change anything in the configuration option.
  Test if you please and let me know exactly what is happening.

• Satellite U205-S5002: cannot retrieve the Express Media Player after upgrading the HARD drive

  So I bought just a new Toshiba Satellite U205-S5002 I love it. One of the great features that interest me was the Express Media Player feature.

  My first step was to upgrade the hard disk and 160 GB and 2 GB ram.
  I placed the disk and ram in my old laptop and sold it.

  Before that I did, I made a copy ghosts and ghost of the hard drive to the new drive. Well come to find out...

  Toshiba is not provided with this software preinstalled, so I followed the instructions to burn my recovery disk Express Media Player and the boot on the new disk.
  So this is where the saga begins...

  After 15-20 seconds, I get a soothing blue screen (NOT of blue BSOD you mind) who says:

  /!\
  An error occurred during the recovery of "Express Media Player".
  -------------------------------------------------------
  Please pick up the image again from the beginning.
  Press any key to exit.

  It is typed exactly as it is on the screen. So, I see some other forums saying: you must have the free space of the disk so I resize the partition that allows 200 MB of space. Always the same... then try 2 GB even... then the 50 GB, same problem...

  OK, so obviously not a question of space. I read while I might need to erase the drive... so I delete the partition, this same error... then I run the recovery disk and tell him to wipe the drive, wait 1 1/2 hour, it ends. No dice! So I decide... ok... Well lets try another disk... I have restored my ghost image... and burned the image again... same question... so I decide to the recovery disk and I'll try to reinstall windows in the factory and make a record...

  Well, it does not work as well as you think... the image is incomplete... windows works fine... but the c:\Toshiba\ExpressMediaPlayer folder is empty!

  I'm happy that I have ghosts my original directory. But I decide allows to Express Media Player a shot more now that I have restored to factory... always the same error... I then decide a trial more... I'll erase drive 1.5 hours, I'll restore from toshiba dvd provided but leaving plenty of space at the end 2 GB (I have a lot about people who tell you to base just around 200 MB)

  5 hours later... moment of truth... Well Yes you guessed it... I don't know anything else to try... I have a bad image?
  You need one that I can download what has worked for them for sure? Or have - I have completely found myself by replacing the HDD with after market and which is originally a kind of compatibility issue?

  Thank you in advance.
  Gabe at supergeekz dot com

  Hello

  It s a great story!
  I put t know how to start so maybe first some info on the Express media player.

  As you said, and has already proposed the Express media player has been preinstalled on the second partition.
  If you want to install this media Express on the HARD disk drive, 150-200 MB of free space must be available. This free space must be on the end of the HARD drive and there must be unallocated.
  To get these free space on the HARD disk, 3 third-party products should be used as for example the Partitions Magic 8!

  I'm not going to write a story how to recover the Express media player because Toshiba has already created useful documents, which described complete installation!
  I found these documents in the knowledge base of computer Toshiba:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=TIC2

  * Check this box: *.

  [Why Express Media Player fails to run after replacing HARD drive or recovery? | http://support.Toshiba-tro.de/KB0/FAQ5C018T000FR01.htm]

  [How to recover a laptop Expert Mode with 2 Partitions and Express Media Player? | http://support.Toshiba-tro.de/KB0/TSB58014O0008R01.htm]

  Hope I could help you.

• Cannot retrieve the Satellite A200-1RK - error: 18121 COMPONENTS. SAV

  Hiya,

  This is it, I got a laptop TOSHIBA Satellite A200-1RK for only less than a year and currently just started to experience problems in this regard.
  So I decided to restore the computer to factory settings using the recovery disk supplied with the notebook. After that the following instructions which recommended that the process started to get succesfull until after 100% invites it commond came suddenly with the following error:

  [Error: 18121 C:\Windows\System32\config\COMPONENTS.] SAV

  Error image restoration.

  The specified image file did not contain a resource section.

  ERROR: ImageX could not apply VISTA E:\05241XP.swm Index 2 weird to C:\.
  Press a key to continue...

  Then, when I press a key, it remains on a white screen and with TOSHIBA down right and don't turn...
  Then I restarted using the power one button came the following:

  Windows could not start.
  A recent hardware change followed by instructions to use the vista DVD and recover the PC using that...

  Help would be greatly appreicated as the laptop does not work... Thanks in advance...

  Hello

  Hmm strange I have never seen anything like it.
  But according to the error message that imagex could not apply VISTA E:\05241XP.swm Index 2 of ODD to C:\ there was a problem copying some files from E to C (from HARD disc to disc).

  Have you tried to boot from the recovery again disk? If this isn't the case, then try it!

  If you will not be able to restart the laptop using the Toshiba Recovery then disk you should check if it s possible to boot from the other bootable discs like Win XP or similar.

  But if none of these disks will work then a hardware problem is possible. In this case I recommend you first HARD drive.

  Good luck

• Cannot retrieve the songs to a cd error "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. »

  Oriiginal title: can not extract the songs from a cd

  I have problems ripping the songs from a cd in my windows media player library. Whenever I click "Rip CD" this message "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. "How can I fix it?

  Hi littleprincess54,

  (1) have you checked with diffΘrents CDs?

  (2) since when are you facing this problem?

  Method 1: Run the troubleshooter in Windows Media Player settings and check if that makes a difference

  Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Change the location of Rip. see the steps mentioned in the link

  To change rip settings in the Options dialog box

  Method 3: You can follow the steps mentioned in the link below that relates to a similar question

  Windows Media Player error C00D1197

  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot retrieve the hp Recovery Manager.

  One day my windows got crashed and I installed windows 7 on it, but has not removed the recovery drive, now I can not install the hp Recovery Manager. help me what can I do to install it n get back breaking my original windows because I see the recovery of files in my recovery disk.

  Buy a Flash DRIVE recovery HP or HP partner. Click on the link to the way to order a. USB STICK recovery media is more robust and is considerably faster than DVD media.

  http://support.HP.com/us-en/document/bph07143

• Satellite Pro L870-172 error 003 when retrieving the recovery DVDs

  Hi all

  Having a devil of a time with this portable darn. So I bought the recovery dvd. tried to boot from the disk and comes with no OS bootable. Thinking it could be a problem with the optical drive, I created a bootable usb key.

  Received the usb key to start

  So I goto Toshiba Recovery Wizard
  Press Yes to say it will wipe the drive.
  Retrieves the software factory default
  In the end, I get an error message

  Error: 003
  Recovery error

  Press ok to start the computer

  You can see the final screen here.
  https://DL.dropboxusercontent.com/s/1fq5yk4t9hjhmk9/2014-09-05%20at%2012.38.PNG?DL=0

  Can anyone help plleeaaaseeee.

  The only thing I can think is that maybe when I created the USB startup key should I copy then disk2 on the stick as well using xcopy.

  I think there are several reasons for the error.
  The recovery media or the hard drive is may be defective. Wrong settings of the BIOS, etc...

  I recommend you to check once more the Toshiba Recovery bootable disc.
  I don t think that there might be a problem with the optical disc drive.
  From my point of view, it could be a bad BIOS setting.

  The Satellite Pro L870-172 has been pre-installed with the system Win 8.
  Please check start secure as well as the UEFI boot mode option in the BIOS.

  Generally, in order to be able to boot from different devices to boot, secure boot must be disabled.