Fscommand

Similar Questions

• C:\hp\recovery\wizard\fscommand\*.exe files deleted due to Trojan Trojan horse - Spy.Win32.Agent.bdrd

  HP/Forum:

  Is it possible to get these filesexe fscommand to HP Recovery Wizardon the site of HP?  I have Zone Alarm Extreme Security 2010 and it quarentined them because of the trojan/virus Trojan-Spy - Win32.Agent.bdrd in a recent analysis.  I tried to clean them but could not and was forced to remove them:

  C:\hp\recovery\wizard\fscommand\AppRecoveryLink_ret.exe

  C:\hp\recovery\wizard\fscommand\CDLogic_ret.exe

  C:\hp\recovery\wizard\fscommand\CreatorLink_ret.exe

  C:\hp\recovery\wizard\fscommand\RestoreLink_ret.exe

  C:\hp\recovery\wizard\fscommand\RTCDLink_ret.exe

  C:\hp\recovery\wizard\fscommand\RunLink_ret.exe

  C:\hp\recovery\wizard\fscommand\SysRecoveryLink_ret.exe

  C:\hp\recovery\wizard\fscommand\WizardLink_ret.exe

  I'm on Windows XP SP3.  I did a virus scan on my Compaq Presario Recovery D: drive and no trace of the virus.

  Thank you!  User: MEJVMSJ (note the 2nd announcement: Correction on above files to include the "\wizard" folder.)

  Cheryl,

  Thank you!  I got the files from a backup I did earlier in the year.  About the fscommand * files, I don't think it's a false positive, that the files are not corrupt directly, but because of the research on the net, I think that flags to be Trojan.  So it's a matter of finding where the Trojan horse is in fact, that I do with Hijack this and other tools.

  This issue can be closed.  Thanks again!  User MEJVMSJ

• Help with fscommand()

  Hi all

  I use my IDE Flash Builder 4.7. I use AirSDK 3.4 with feathers Starling and an extension of the video. I intend to use my application as a stand-alone desktop application, and I think / hope I put in place correctly.

  I'm having the time more difficult to understand how to use fscommand(). I understand how to complete the settings functions, but regarding how to configure the fscommand folder that will hold all the .exe, I'm lost. I will attach a screenshot of my folder structure.

  I read somewhere to use fscommand, you use a projector (.exe) flash instead of a .swf. What this means I can't run my program in debug mode and I have to publish it in order to test it. I guess that I am myself confused with .exe and .swf.  Also, I keep reading the need to use a program from northcode. Is this true and what exactly does the program do?

  What I'm trying to do is to load some games .exe from my code and put it in my program window. Is this possible? I have an exercise bike hooked up with sensors that will send the keyboard commands to my flash program. I want to be able to use the bike to play games like Mario Kart race. The reason why I want to play my program window instead of playing directly from the native window of the game .exe is in my flash program, I have already written functions that will convert the keyboard commands in actual data such as speed, distance, time, etc.

  Any help would be greatly appreciated!

  In addition, it would be great if someone could point me to a tutorial on day of fscommand(). I see a lot of tutorials, but they are all from 2008 or earlier. If anything, I'll try and write a tutorial myself after that.

  Thank you very much!

  Kevin

  I might be a little step forward. A flash projector is unable to launch other executable "inside" himself. Can simply launch an executable, there is then no real control or connection with it. This is the case, I'm assuming that you were already running Flash inside a package that is more capable, as a visual c# or VB app that displays Flash via an ActiveX control (where the link).

  If you do not do what I described above ExternalInterface won't help. He (and fscommand) has the ability to communicate with an application 'host '. So if you didn't have, say, a visual basic wrapper running your Flash, ExternalInterface could communicate and receive events from it. The wrapper would give you more control, such as the ability to run and to a certain extent, manage an application running in several different ways.

  A key things are getting more complicated and capable, if you are using AIR. You can use nativeprocess instance that monitors the input/output standard, but your application will need to be built to use that. An immediate benefit of this is that you can stop the executable so that you can not with fscommand(). This link will show you examples of communication STDIN/STDOUT as starting and stopping the process. However, this process is not "incorporated" in Flash, it is separated. If this is an acceptable feature so it was worth it. The feature using AIR is almost as easy as set your target publication to LOOK for [platform of choice]. Take note of the NativeProcess requirements, such as extended desktop and using a profile AIR installation program.

• fscommand within onSoundComplete does not

  Hello

  I build a flash animation that must perform a function javascript reading afer ends a particular sound.

  Here is the code that I currently use:

  var som:Sound = new Sound();
  som.attachSound ("1_07_8.mp3");
  SOM. Start (0,0);

  som.onSoundComplete = function() {}
  fscommand ("animation", "ready");
  }

  I publish the HTML code as a template for Flash with FSCommand, and I have the following code on the HTML code inside the javascript DoFSCommand function:

  If (command == 'animation') {}

  Alert ("this slide is" + args);

  }

  It is placed within an IIS application, so that no problem of security prevents the comm between SWF and HTML/Javascript file

  I did it successfully on a test SWF, but here, the fscommand was triggered by a delivery from a button event. Is it not possible to trigger the onSoundComplete event?

  THX

  You must have the use of the class ExternalInterface instead of FSCommand?

  This is the most modern method for communication between Flash and the web page.  You should be able to find some useful information if you are using Google.  Here is a link to an article that covers many forms of communications, including the ExternalInterface approach.

  http://www.Adobe.com/devnet/flash/articles/External_interface.html

  If going in this way does not appeal to you, divert your attention from the problem that you thought you had and try to recreate what you say, you got the job at the end of the html.

• Fscommand... Help, please

  I've seen a web page that plays a swf file and to Midway through the size of the page change. How can I do it and is it possible to do it before the movie actually starts to play? I think I might need to use the fscommand to do, but I don't know exactly.
  Thank you

  You can use fscommand() and function resize() of javascript. or if you are using flash 8, use the externalinterface class because it's more reliable.

• question of fscommand

  I create an opening screen of installation of Flash 8 that I export in exe. His job is to launch other files exe, via fscommand. But this part does not work.
  
  Here is the code that I have attached to a button:
  InstallPoint.onRelease = function () {}
  fscommand ("exec", "Setup.exe");
  fscommand("QUIT","");
  }
  
  So you click on the button with the name of the InstallPoint instance, and it is supposed to start setup.exe and exit the Flash Player. The part of smoking cessation works fine, so I know that this button script is running. But the launch part does not at all.
  
  In the same directory as my Flash exe, I have the file setup.exe. So, it's not a problem concerning filepaths. And I tried running setup.exe directly, that works also. It's just that this line does not work:
  
  fscommand ("exec", "Setup.exe");
  
  Any suggestions?

  Thank you for that.

  I also discovered that the fscommand exec command applies only to the exe files. This project involves a msi file, but fscommand will not work with this one.

• Do you need a JAVA virtual machine for fscommand() to work?

  Page 492 of the book "Guide using Flash" said: "If you use JavaScript and Flash on the same page, Java must be running for the fscommand() function works." "They really mean Java (i.e. a JVM installed and running on the computer) or do they mean that JavaScript must be enabled in the browser"?

  sparky1962 wrote:
  > Page 492 of the 'Guide using Flash' book says: ' If you use JavaScript and Flash on.
  > the same page, Java must work for the fscommand() function works. "Do
  > they really means Java (i.e. a JVM installed and running on the computer) or do
  "> mean that JavaScript must be enabled in the browser?
  >
  No, I think that must be a typo and they mean "javascript should operate.

  I use fscommand() calling javascript anyway, as it does not
  in some browsers. getURL ("javascript:functionCall('someargument')"); is
  much more reliable. Or, if you are targeting 60.65.0 flash drive or
  above, there are the gateway Flash/Javascript (see link below) and
  Finally, if you are targeting a flash 8 player there is the
  Class ExternalInterface built in flash.

  http://weblogs.Macromedia.com/flashjavascript/
  --
  MOLOKO
  Macromedia Flash MX 2004 certified developer
  Macromedia Certified Flash MX Developer
  ------------------------------------------------
  : remove _underwear_ for the reply:
  "There is not a demon - it's just God when he's drunk" Tom Waits
  ------------------------------------------------
  MCG, CS, IT, MC d - s ++:-a - C++ U - P + L ++! E W +++ $ N ++ O? K+ w+++$ ! O M +.
  VIRTUAL MACHINES? PS +++ PE - Y PGP + t + 5 - X - R * tv ++ b +++ DI +++ D + e G h - r + y ++

• How to fix an asynchronous communication between fscommand and javascript

  Hi all, I'm using fscommand to enter a value in Flash, then change it.
  
  Whenever Flash does not recognize the value because
  Flash does not expect and the value shall not be filled during the amendment process.
  
  So I found a solution with the buttons, but I want to leave this little demo-code (attached) run without buttons.
  Is it possible to insert a short break or something as in java thread.sleep (xxx)?
  
  Maybe that's also a problem with the SCORM API (but this is not the point)
  
  I hope you can help me,
  
  Kind regards
  Darius
  

  Allright!
  I found a solution.

  It's a bit fast & dirty, but it works ;)

  If someone sees some improvement in the amendment of the code, please feel free to edit and post ;)

  Best regards, Dary

• fscommand, quit smoking

  Hey guys,.
  
  I was wondering if someone can help me, it's probably a really simple, but I can't? Maybe ive been look for too long, I don't know. But what I need to do, is get the flash player to close when the user clicks on the button "exit". I've used before in actionscript 2.0 fscommand, and I presume that it was always the same in the script action 3.0 but for some reason that its does not work? the code I have is below:
  
  Thanks a lot for your help in advance
  
  Jude :D
  
  

  The window will not close to test the animation only when you run the projector.

• A link to the files without using the FScommand folder

  Is there a way to bind an executable Flash to doc, pdf, and other exe files without using a 3rd third party tool or the FScommand subfolder? I want all the files in the root folder. Is there a solution to actionscript (Flash 8)?
  
  Thanks for any help.

  Just tried it myself, and in fact, now there must be something inside the fscommand that blocks execution of vbs. Security? I'm sorry.
  My advice would be to use .bat files, but to write
  Start c:\test.txt
  instead of only
  c:\test.txt
  The DOS window still not open, but immediately close again, given that the start command returns immediately.
  All the best
  Wolf

• Fscommand actionscript 3 problem

  Hi all!
  
  Im trying to run a file with AS3, but it will not work and Im getting really nervous... Help, please!
  
  What wrong with this script? the manual says 100 things on packages and all that, is that related to this simple script?
  
  

• Read channel values

  Hello world

  I have a very common problem. In a SOUTH dialogue box, I load and display channels in a channel-drop-down list box. If everythings perfect so far, but I have a few text strings and I text entries whose length can vary, but I can't understand how to display the text string values in a drop-down list box, after that the corresponding text string is selected. It can be very simple, if there is a command which is sth like "read channel values. I got an idea, which is a lot more time, I can create a dynamic table and use a drop-down-list list box - but I'm in kind of a hurry. So if you have an idea about it, I'll be very grateful.

  Thanks in advance

  Hi fscommand.

  I don't know if it might be useful for you, but if you want to write or read the text values of the channels is a command called CHT.

  For example: reading MyText = CHT(3,"Group1/TextChannel")

  writing for intLoop = 1 to 10 CHT (intLoop, MyChnName (0)) = 'Value' & Next intLoop //for loop writes the values

  Greg

• How many curves can be traced on a tiara 2D graph

  Hello world

  I want to draw the curves of some(360+) on a 2D graph. I got the results for samples that are measured at different temperatures. I had no problem to trace the curves of all devices for a temperature. But what I noticed when I tried to trace the curves of all devices for all temperatures, it is that it does not work. Tiara (ver.10.2) gives an error if the number of curves is higher than 250, how is this possible? Is this a program limititaion which can be fixed with a patch or service pack, or I do something wrong?

  Thanks in advance

  Hi fscommand.

  From DIAdem 11.1, the maximum number of curves on a graph given in mode or REPORT is 250.  This has been the case for many years.  This restriction may disappear in future versions of DIAdem, but I do not expect it to disappear in the period of 2010.

  The solution is to overlay the 2 graphics, on the other.

  Brad Turpin
  Tiara Product Support Engineer
  National Instruments

• global variables for the XML plugin problem

  Hello world

  recently I started working on a dialog box SOUTH, where the user can load the *.xml files in DIAdem.So much my code for the button looks like this:

  ....

  Call the FileNameGet ('ALL', 'FileRead","*.xml")
  Call DataFileLoad (FileDlgName, "XML_Plugin", "Load")

  ....

  And I must say that it works very well! I am able to load all listed in the devices file. BUT when I tried a number of loading devices, I used a global variable, that I defined in the vbscript file that I load the SOUTH since, I've noticed that global variables, I've defined with GlobalDim are not defined in the vbs.:mansurprised of XML_Pluging:

  Then I started to experiment and so far without success, no matter where I define global variables, in my plugin *.xml all not defined! The native commands even and DIAdem functrions does not work. If I run the script in tiara, it shows no errors, but when I use the plugin to open a file, then it gives an error. For example, MsgBox is not allowed.

  I used the plugin example for *.xml, which was published on the Web site of NOR, and I made a few changes. But overall I have it has not corrupted and I kept the same structure:

  Void ReadStore (File)

  Dim XmlFile: xmlFile = File.Info.FullPath
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  'open the file '.
  OpenXMLFile xmlFile

  End Sub

  Void OpenXMLFile (xmlFile)
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
  ' Open MS - Xml Parser
  'Create the ActiveX object for the Microsoft XML parser.
  Dim XDoc: set xDoc = CreateObject ("MSXML2. DOMDocument.3.0")

  "Try to load the XML document
  If xDoc.Load (xmlFile) = False Then
  "Failed to load the document XML.
  RaiseError ' unable to load XML document!
  End If

  protected originalLocale: originalLocale = Getlocalte
  "SetLocale" en - us ".

  "The XML document loaded successfully!
  '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''

  '----------------------------------------------
  "Read the header information.
  '----------------------------------------------

  Here, I have read some values of the header and then I loop on all devices present in the file!

  So basically I have two subroutines and that's all.

  SetLocale originalLocale

  End Sub

  So what I am doing wrong? Why global variables and other functions do not work. Is it because there is xml code in the script this way or it's a version problem?

  I use DIAdem 10.2. If I use global variables in other vbscripts, I use to draw curves for example I have no problem. Now I'm no *.xml code and no subroutines.

  I'd appreciate any solution that will make my *.xml plugin to work.

  Hi fscommand.

  It is expected all behavior.  Use XML, as all VBScript DataPlugins, runs in a separate VBScript host of the DIAdem VBScript host.  DIAdem VBScript host adds all global variables green and Red controls global to host Microsoft VBScript standard.  Use VBScript host has its own special abilities (file object, root object), but there is NO access to Globals green or red blanket orders in the reception of DIAdem VBScript.  Your SUDialog runs in a third host VBScript, which is separated from the other two and the other two are not capabilities (command SUDialog callback functions), but the SUDialog VBScript host and VBScript tiara share all global variables green and Red orders overall.

  Normally all blue VBScript commands are allowed in all 3 VBScripts hosts, but in the case of the DataPlugins MsgBox and InputBox functions were especially restrained because the dialogues could cause a lot of trouble with the DataFinder.  In fact, they have been allowed to 9.1 tiara which was the latest version of tiara for the DataFinder appear.

  So, why do you want to pass information between the XML use and tiara?  If you want to use to share information with DIAdem, then you should just expose every piece of information as a new property in the data portal, which can read and use the code VBScript DIAdem.  The path of the XML file is already available inside the use of XML.  What other information in the call VBScript DIAdem do you need to share with the use?

  Brad Turpin

  Tiara Product Support Engineer
  National Instruments

• SanDisk Sansa Clip + 4 GB MP3 player with FM Radio

  Hello-

  My new sansa clip + out of the box and I'm not able to do Radio FM works.  Battery is charged.  All I get on screen is a set of headphones and the 'music '.  I do not expect to play music because I have not yet loaded, but I expect to be able to get FM radio but can't seem to get there.  Any suggestions on how I have to happen?  Thank you.

  Please note that I do not see a menu of items to select from the MP3 player.  I do not see a "lock" or "unlock".

  My computer recognizes the drive as a new piece of hardware.

  The reader does not recognize the software on the CD when I put the CD in the computer.

  The player does not allow me to make the software what I t hink is the "root directory" for the player.  I guess tha the directory "root" is the "Sansa Clip + 4 GB" or the "internal memory".  It allows me to copy in one of these.   Appears as:

  + The Sansa Clip + 4 GB

  -Internal memory

  + Albums

  + Audio books

  + Music

  + Playlists

  + Podcasts

  + Records

  + Service

  My D drive that reads the CD has these files it contains:

  Autorun.inf and sansa - install .exe and one other file that reads:

  fscommand with these files it contains: dloadrhap.exe, dloadrhap.txt, proxy.bat, proxy.exe

  If I do not have need of these, please let me know.  I don't want to stuff more then I need to run the player.

  I'm assuming that I need only the files autorun.inf and the sansa - install .exe.

  I do not understand what is Rhapsody or why I need.

  Thank you.

  Bonnie

  Now, don't laugh at this suggestion, but: when you get the player, there is a transparent plastic sticker that was placed on the screen of the player, which has a screen simulation showing the items that describe you see on your screen - have - you, you take off the sticker? (It generally is a small tab on the right side of the tile to help with that.) Once you do this, the player I hope will begin to operate as expected. On the CD, you don't need at all! The CD is required to use the separate music Rhapsody and optional subscription service (for which you pay every month, after a free trial, usually). If you do not want the service, go to the CD. Finally, you should check and see if your drive is the latest firmware - look under settings to the player and to compare this version number firmware recent listed in the upgrade thread Firmnware sticky at the top of this forum. If the thread here has a more recent version of firrmware, recommended that you upgrade to it-, it is very easy to do. I hope this helps!