Color LaserJet 3600n's standard paper tray
We have a Color LaserJet 3600, who had a problem with the standard paper tray being stuck. Could not get out until we were able to get inside the machine and press the metal plate that makes up the paper when the drawer is in the printer. After we got him we found a small piece of plastic broken on the end of the right side of the metal plate that sticks through the plastic side of the tray (see picture). Someone know where I can get this plastic piece without having to buy the whole set?
In general these tidbits on the bins of paper, like this one, is not available by themselves. We can check the HP parts store to see if the part is available, but probably it will take to get the tray as a single unit.
I hope this helps.
Tags: HP Printers
Similar Questions
-
Windows 7 and HP Color LaserJet 3600N
HP did better still. No Windows 7 for Color LaserJet 3600n driver! You can fill in the blanks... However, using Windows 7 Professional, I could install the XP drivers. Download software XP and it runs in a virtual XP session. I then added the printer as Windows 7 would cause you to do. The add-in has not completed correctly - CTRL/ALT/DELETE. However, the printer has been added, and it seems to work. Maybe HP and Microsoft are pushing the broader Windows 7 Professional.
Hello world
Download and install the software the complete solution for this printer on the link below.
Complete software solution for the HP Color LaserJet printer series 3600
-
using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.
I was able to recreate what you see. I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.
Please consider trying this as a possible solution:
(1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete. Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties. Click the driver tab, click the CLJ3600 and then click on remove.
One when you're done, restart, and then install the CLJ3500 driver. This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.
After installation, try printing again.
The output I have indicates it will print is more negative. Please let me know if you have success.
One caveat about this solution. The Color LaserJet 3500 doesn't support duplex. Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.
-
need printer driver for HP Color LaserJet 3600n running Windows 8
Need printer driver for HP Color LaserJet 3600n running Windows 8
Click Next if you Win 8 pro 64-bit
-
Yosemite and hp printer color laserjet 3600n hp office jet pro 8600
Hello
I've updated the maverick at yosemite. The last update for the printer software has been installed (version 3.0 on October 1, 2014). But both printers not working anymore.
Color laser jet 3600n stops after 10% of printing with the PCL XL, subsystem kernel error, error: data, missing operator: sole source, post 14.
With the OfficeJet Pro 8600, it is quite similar. The printer starts loadin page. After a few minutes the printer push the empty pages. In both cases the Mac lost the connection to the printer for a while. After a few minutes the connection is established.
The system is OSX Yosemite 10.10
Color LaserJet 3600 driver version 2.0.3
connected to the cable / Hello
Serial number [personal information deleted]
number of Procuct Q5987A
OfficeJet Pro 8600 N911a
connected without wire/Hello
FW-version CLP1CN1322CR
Serial number [personal information deleted]
driver HP Officejet Pro 8600 2.0 version
Product CM749A number
Information device of the HP utility software.
A response in the German forum was helpful:
- reset the printing system
- Reinstall the printer HP (HPPrintDriver3.0.dmg) update
- restore volume access rights,
- Restart the system and
- Reinstall the printers
After that, the two printers works previous.
-
HP Color LaserJet 3600n Laser printer
AAAI has recently updated computer from XP to Windows 7, now this printer print custom. I tried to download the new driver, but HP 3600n does not appear as a compatible printer, how can I use this printer with Windows 7?
According to the website of HP support for Color Laserjet 3600 series, you can use the Vista driver.
Their instructions on how to do this run (click on 'Get software' in the following link for instructions): http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&taskId=135&swEnvOID=4062
You can get the Vista driver: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=501046&taskId=135&prodTypeId=18972&prodSeriesId=501044&lang=en&cc=us
-
Color Laserjet 3600 n does not print. "Looking for printer" message in the printer window. Tried the new ethernet cable-no improvement. Printer turned, restarted the computer and enabled printer back - no differrence.
Internet works fine. Help, please!
The software update referenced actually comes from Apple. If it's not showin your software updates Apple, then you can manually download it here:
-
HP Color Laserjet MFP M277 Pro: Unexpected tray size 2
How dio I solve this problem? I saw a post on a similar instructions for printer on how to clean the print roller (?), but it was not for this printer. It does not say 'cleaning' after that it prints the first page of what either.
I tried unplugging then on, unplugging while disable, uninstall and reinstall the printer and manually setting paper on the printer itself.
If I click on "OK" after the message, it just prints the first page, goes into cleaning and gives the same message. "
Thank you! Cleaning of the rollers and it works again.
-
Is the hp color laserjet 3600n clouds print-compatible?
try to connect my printer to print cloud. I have windows vista
Hello
Looks like a no, I can't find it in the following list:
http://support.HP.com/us-en/document/c02814760
You can check again.
-
ASUS B85M - G R2.0 Desk top: color laserjet 3600n
This printer as the printer is not recognized by my operating system. It appears in the settings page of the device than others. When I run the troubleshooting of printers, it tells me that it's an older device that will not work on USB 3 ports and select a USB 2 port. I did but troubleshooting insists that it is always on port USB 3. What can be done to fix this?
-
HP Color Laserjet 3600n: door does not close
There seems to be something in the way that prevents the door from closing completely. I switched all cartridges and transfer belt. It seems there have broken anything inside. Because the door does not close, it won't initialize.
Any ideas?
Thank you for your ideas, but he wasn't a cartridge problem.
I hired an eyes of co-workers and she found a white tab in the upper left corner that hung down unlike our other 3600 s. When he was pushed upward, all broken in the door completely closed.
-
HP Color LaserJet 2600n: lack of output tray
I seem to be missing the "container" for my printer. I moved recently and during the move, this part has disappeared. Is there a way I can replace the part.
Thank you.
Let me start with eBay.
I don't think that HP supports this model any longer.
If my post is solved your problem and click the accepted as button solution under him.
In order to thank a Tech for a post click the thumbs up button under the post.
You can even click on the two buttons.
-
HP Color Laserjet 3600n: ERROR 59.C0
I replaced the belt of electronic transfer of ETB but error still out.
Hello
You must replace developing separation-drive Assembly and calibrate the product. If the problem is still the next step is to replace DC controller.
-
HP Color Laserjet 3600n: printer says ready, but none of the printing jobs
So my printer worked very well; I need to fill my Cyan toner but has found a way to move that and print in black only. That worked for a while until this week. My printer cannot print; all jobs are located and there is an error message. Is it possible that my lack of Cyan takes a 'fee' If you want? I honestly don't know what else to do and it is imperative that this printer it works not just makes things easier for my situation of work in my office.
Help! I rebooted I know how to stop the calibration, but the latter let him calibrate to see if that helps. Nothing.
Hello, to test the connection type printing and make sure it is not the print job to disconnect from the network, restart the machine and try to print a circulation of internal test. If it works, then reconnect the network cable on back in and see if the work in Quebec will be printed. If it does not and shows the error, delete the task, restart the machine and try to print the same job or another job and see if it works. Basically, sounds like a 49 error situation.
I hope this helps...
-
problem adding a HP Color Laserjet 3600n on a machine Windows 8.1
For some reason, the driver installation program does not do anything in the download folder - at least the folder is empty.
I did, however, find documentation on a work-around using the Vista driver to
Maybe you are looking for
-
Force the worker compilation to work faster
The process of creating the FPGA bit files takes a long time even with a simple FPGA design. I followed the system resources, when the worker compile creates the file bit. Only a few percentage of the CPU is being used. Is there a way to force works
-
Failure rate of hard disk EliteDesk 800 G1
Has anyone else had rained failure rate of 5% on hard drives EliteDesk 800 G1? We have a fairly LARGE amount of disk on these devices failures. We cannot be the only ones... we have more than 900 of them, and they have failed across the country...
-
Unable to poll for new messages on your HTTP server. 0x800CCC33
Outlook express 6.0 error message Unable to poll for new messages on your HTTP server. Account: 'Hotmail', server: 'http://services.msn.com/svcs/hotmail/httpmail.asp', Protocol: HTTPMail, server response: 'Forbidden', Port: 0, secure (SSL): no, Serv
-
After my computer has been corrupted. I tried the method 1. Log in the system by using an administrative user account other than the user account that is experiencing the problem. 2. backup all the data in the profile folder of the current user if th
-
Save money... in action
Hello, how can I open the window "Save as...". "in an action. When I try to record this in an automatic action, this does not