FSX crash with g3d.dll

Similar Questions

• Digital Photo Professional crash with ntdll.dll

  Digital Photo Professional crash with ntdll.dll Module fault. Error message reads Viewer DPP module has stopped working, and then closes. Failed application DPPViewer.exe, version 3.8.0.0 failing module ntdll.dll, version 6.0.6002.18005

  Please please help, this problem makes me crazy.   I used Canon's Digital Photo Professional for a little while, then all of a sudden it started crashing whenever I go into one folder other than the one it opens upward in, which is the office.  I had updated some drivers between it works and does not not and maybe do a few other things, but nothing significant that pilots.  I've restored since the pilots said, they were the USB drivers in Device Manager, but they are back to normal now.  I uninstalled and reinstalled many times and we have tried various other things also.  Please HELP, it is important in my work flow software.

  I opened the event viewer, and that's what it came with:

  Failing application DPPViewer.exe,

  version 3.8.0.0.

  timestamp 0x4b2f0b54,

  failed ntdll.dll module,

  version 6.0.6002.18005.

  timestamp 0x49e03821,

  exception 0xc0000374 code,

  offset 0x000afaf8,

  process 0xa98 ID,

  start time of application 0x01cadce8e36a701b.

  I spoke to Canon and they said that, because it is ntdll.dll that causes the problem, then is there nothing they can do.  I noticed that the ntdll.dll version is the same version that the drivers I have has been updated since and am now back to.  Is there a link? Really bad, I need this problem sorted and preferably without a new installation of windows.

  Thanks a lot a lot.

  Jakob Tungelund

  Hello

  The DPPViewer.exe is a Canon utility to check with their support for any updates and/or
  known issues. The error occurs when not not using the program from Canon? If not then it is in fact
  caused by the program of Canon or its associated drivers.

  The ntdll.dll is actually leads to the fault and it not actually the cause of the error.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• iTunes v12.5 crash with webkit.dll on launch

  I had a Windows 7 PC that I currently v12.4 iTunes running without any problem. During the upgrade to iTunes v12.5 crashes instantly to launch registration module webkit.dll as cause. I had this problem several times with older versions of iTunes and incompatibility with Intel integrated video card drivers. Force the system to use an outboard video piece of card and things very well. On this system of rear bearing to v12.4 iTunes everything worked perfectly. A new installation of iTunes v12.5 even after removal of all Apple related files and registry entries and iTunes v12.5 blocks exactly the same way.

  Apple has an obvious bug in v12.5 that needs to be crushed. As it doesn't seem to be a bug submission system mere mortals who have access, I can only hope someone from Apple sees this (I'm not holding my breath) and puts it in their system. FYI, Apple, I really want to buy a new iPad Pro 12.9 ". But until there is a version of iTunes that runs on my PC AND supports iOS10, I can't get back my money. AKA, there is a financial loss to the company for bugs not crushed.

  Thank you!

  -EM

  I have this problem and have tried the recommended fixes I could find. I uninstalled everything apple, deleted and any preferences directory Apple that I can find, rebooted, itunes installed as an administrator (or not) and it still don't work when you try to connect to the store. I have Visual Studio is installed on my machine, when it asks "Debug"?, I say yes, and I get a message like "Exception thrown in 0x00007FFC71F25E36 (WebKit.dll) in iTunes.exe: 0xC0000005: location 0 read access violation x 0000000000000000'."  It would be nice to solve this problem.

• App crash with ntdll.dll

  I have an application running on 32-bit windows computer 7.

  Unexpectedly, the Application crashes.

  I checked the event viewer and saw the below error:

  Faulting application name: MyApplication.exe, version: *****, time stamp: 0x578e799c
  Faulting module name: ntdll.dll, version: ******, time stamp: 0x573a54ca
  Exception code: 0xc0000005
  Fault offset: 0x00000000000438df
  Faulting process id: 0x22a8c
  Faulting application start time: 0x01cf4a1f36447f86
  Faulting application path: C:\Program Files\MyApplication\MyApplication.exe
  Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
  Report Id: 3e2eb1a7-b615-10e3-bf1b-94a6h885c29Now my question is:Is this issue something within my application.. or something I need to do with OS..Please help me solve this issue..
  

  Thanks for your quick response.

  Have you tried to run the System File Checker and perform a clean boot? We really recommend it.

  On the other hand, you can try the other options below if it doesn't:

  Method 1: update Windows

  1. Click on the Start button and look for Control Panel.
  2. Click system and security, and then select Windows Update.
  3. Click search for updates , and then click install updates.

  If you encounter him even after the update of Windows try to reinstall the DLL.

  Method 2: Reinstall the DLL

  1. Type cmd in the search box, and then click right to select command prompt run as administrator.
  2. Type this in the command prompt:
     • regsvr32.exe /u ntdll.dll and press ENTER key (this allows to uninstall the file)
     • regsvr32.exe ntdll.dll and press ENTER key (this will reinstall the file).

  Let us know how it goes.

  Kind regards

  If you find this useful, feel free to mark as answer.

• Photoshop CC 2015.5 crashes with Msvcr120.dll Windows 7 SP1

  I tried to open it this morning and received the message from crash. Noticed in CC she had an update, did. Yet had a report of incidents. I tried to restart. Signature of CC and rebooting and logging back in CC.  I tried to move the file files sniffer.exe programs on the desktop.  Our IT person uninstalled PS and Visual C++, reinstalled them both and it still crashed.  I called support and that you don't have not yet heard back. Here is my report. Help, please. I have a job to do.

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 16.1.2.355

  Application timestamp: 56961fa0

  Fault Module name: MSVCR120.dll

  Fault Module Version: 12.0.21005.1

  Timestamp of Module error: 524f83ff

  Exception code: 40000015

  Exception offset: 0000000000074a 46

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Additional information 1: 3c9a

  More information 2: 3c9a0123a0282a9326d702733b9d5a57

  Information additional 3: 872 bis

  Additional information 4: 872a77bd1eca43add23689c23c9ddd5f

  Please install the new C++ Redistributable 2015.

  Link:- Download Visual C++ Redistributable for Visual Studio 2015 of the official Microsoft Download Center

  ~ Assani

• Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  This happened on 02/10/15 and happened again on 24/02/16. We have two printers that depend on this file. HP Color LaserJet 553 and HP LaserJet M604. I have over a hundred of the M604 on my network and the last time that this happened, it dominoed across the print server system.  This has also caused some spools of printing stop on end users. The only way I can get end users up is to uninstall the driver package.

  This issue affects the Windows Server 2008 and windows computers 7 as well.  Try to determine why this has happened twice and determine how fixit before the rest of my Server 2008 and end down as well.

  The error lies in the hpb6sy2917_x64gui.dll.

  

  This time I had to remove the printers and drivers with a regedit. I also deleted all files in all files for 2917 in the

  C:\Windows\System32\spool\drivers\x64\3 folder. But this time, when I reinstall the M604 M553 drivers and it lowers again print server spooler. I'm frustrated to say the least.

  I tried clearing forcefully queues by deleting files in C:\WINDOWS\System32\spool\PRINTERS

  Hello

  According to the description of the problem, you work in the Windows Server 2008 domain environment. So, I suggest you to republish your query on the TechNet forum, which is run by the other IT professionals who are trained on the server issues. However, you can try to run the REG file that was downloaded in the link provided by Ramesh Srinivasan in his position, responded on June 2, 2012 in the thread link provided below and see if it helps you to solve the problem.

  Deleted print spooler service

  http://social.technet.Microsoft.com/forums/Windows/en-us/9d0bd665-621d-449E-a22f-b512e068ba2a/print-spooler-service-removed

  If the problem persists, try to repost your query on TechNet forum. Keep us.

  Kind regards

• FSX can run fine on Windows 8, but now does not - install crashes with 1722

  To the right,.

  I have a HUGE problem with reinstalling Flight Sim X on Windows 8.  When I installed it first, it ran fine, until one day he crashed it so bad that it would not even close or uninstall properly - I had update my system just to remove it.  Now, I am trying to reinstall it, but it won't reinstall - the installation program runs in a first time, but when it comes to registration of fonts, it crashes with a 1722 followed of a 1603.  I already tried to use licensing reset tool http://support.microsoft.com/kb/928080, but it does not work either!  What should I do?  Thanks in advance!

  Just to be sure: you confirm that you have opened the CMD console in administrator mode to run the resetsldl command?

• iTunes, sync to Crash with Seven Pro 64-bit

  Hello

  iTunes Crash with this error message when I try to sync my iPhone 6 on my PC with 7 Pro 64-bit

  Problem event name: APPCRASH

  Application name: iTunes.exe

  Application version: 12.3.2.35

  Application timestamp: 56689eb6

  The default module name: CoreFoundation.dll

  Version of the default module: 1.750.32.0

  The default module timestamp: 55dd4433

  Exception code: c0000005

  Exception offset: 0009f63a

  The system version: 6.1.7601.2.1.0.256.1

  Locale identifier: 1036

  Information extra No. 1: 0a9e

  Information extra No. 2: 0a9e372d3b4ad19135b953a78882e789

  Information extra No. 3: 0a9e

  Information extra No. 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0x040c

  If the online privacy statement is not available, connection out of the version:

  C:\Windows\system32\fr-FR\erofflps.txt

  Can you help me solve this problem?

  Thank you

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  Error sharing a trend similar to that in the third box, so a similar approach should work. Looking for CoreFoundation.dll in:

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  Delete if found, then repair Apple Application Support.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review the other boxes and the list of documents to support more far down page in case one of them applies.

  Your library must be affected by these measures but there are backup and restore advice elsewhere in the tip of the user.

  TT2

• All 32-bit applications crash with error 0xc000005 after windows Server 2008 R2 backup

  Hello world...

  I am in a big mess... and really need help!

  I did last night a Backup windows... but one of my users were connected to the server works with applications...

  and this morning No 32 no bits applications... same installer...
  the 64-bit application works very well...

  Others or generating an error 0xc000005 and stop...
  failing Ole32.dll module...

  And I'm sure that the backup is reliable, even if the backup of windows said it was successful...

  I tried to restore only the apps files... but it seems more complicated than that...

  If anyone has an idea...

  Hi, Emeric,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that 32-bit applications crash with an 0xc000005 error code in Windows Server 2008.

  As the question more appropriate forums Technet, write the topic in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  Using the windows-related issues feel free to post on Microsoft Community.

• Svchost.exe is free running and leaves multiple windows open all gel. Re-loaded windows XP after a crash with original rescue records.

  Original title: Windows XP - free race - is lost.

  Just re - load windows XP after a crash with original rescue discs, svchost.exe is free running and leaves several Windows Open gel, all on and offline. Any ideas? I ran ms-fixit beta for all listed. I also disabled Norton and now use Windows Defender, still no luck.

  Hi MarkBerri,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  Svchost.exe is a process name generic host for services that run from dynamic link (dll) libraries. The Svchost.exe file is located in the folder C:\Windows\System32. At startup, Svchost.exe checks the registry services part in order to build a list of services that it needs to load. Multiple instances of Svchost.exe can run at the same time. Each Svchost.exe session can contain a grouping of services. Therefore, separate services can run, depending on how and where Svchost.exe is started. This grouping of services enabling better control and easier debugging.

  Svchost.exe groups are identified in the following registry key:

  HKEY_LOCAL_MACHINE\Software\Microsoft\WindowsNT\CurrentVersion\Svchost

  You can run the auditor of system files on the computer.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Note: if it asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:

  http://support.Microsoft.com/kb/900910 (valid for Service pack 3)

  Hope this information helps.

• Vista will not register, the computer crashes with log off

  Computer crashes with log off of Vista.

  Hello

  Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
  on closed session, restart, or stop. Those who do this will be often blocks that you met.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Explorer crashes failed msvcr90.dll

  Friends

  I have this most annoying problem. It happens on my computer and the computer of a friend. I have Vista Pro 64 bit and my friend a Windows 7 Home Premium, also 64-bit.

  We both use the same two programs for a specific project, we want to do. A program is a data management program called FieldWorks, where export us the data in the format of LibreOffice. I think that this problem started during the installation of LibreOffice and then begins to export stuff in the program of FieldWorks.

  Very often, when we click on an exported file in .odt (LibreOffice) on the desktop, or simply click anywhere in a folder on the desktop, where we store .odt files, then immediately the Windows Explorer crashes with the following error message:

  Explorer Windows has stopped working. Windows can check online... Check online... The details of the problem are:

  Problem signature: problem event name: BEX64 Application name: the Explorer.EXE Application Version: 6.0.6002.18005 timestamp of the Application: 49e02a1e fault Module name: MSVCR90.dll fault Module Version: 9.0.30729.6161 fault Module Timestamp: 4dace4e7 Exception offset: Code of Exception 00000000000552d 4: c0000417 data exception: 0000000000000000 OS Version: 6.0.6002.2.2.0.256.6 locale ID: 1033 additional information 1: complementary 46e0 2 information: information additional 4ce498f1e2ebb3719af008d4ef97bedc 3 : 7 d 05 additional information 4: 729ac305dabb24e28fbe99019ecbbab7
  Also my friend and I get the exact same message and the same fault Module name and version. It can happen several times in a row, insofar as we cannot get to any of the .odt files in the folder via the Windows Eplorer window or desktop, but I got a remove the .odt file in a command window.  Otherwise just Explorer to crash. :-(

  I tried many things to fix this, among them:
  1. I re-entered the msvcr90.dll
  2. I learned that it is the program of MS Visual C++ 2008 that installs this msvcr90.dll and use it
  3. I removed all instances of MS Visual CC ++ Vista computer
  4. I removed all instances of the msvcr90.dll and restarted. Then I made sure that no file with this name has appeared again.
  5. even after that I still get this crash explore with this error message about this being the fault module msvcr90.dll!
  6. I used Windows find defective or missing files, sfc scannow. No gain.

  How this possible error, if there is no msvcr90.dll is left on the system? And no Visual C++ 2008?

  I then tried to reinstall MS Visual C++ 2008 SP1 Redistributable to see if that helped, but once again no change. :-( The same error came once again. This version of Visual C++ have not yet installed a version of msvcr90.dll but a msvrc100_XXX.dll

  Until I deleted the MS Visual C++ 2008 (and 2005 and 2010) of my system, I noticed that the existing msvcr90.dll was not even the same version that says that this error report is the version of the Module of fault!

  I am quite at a loss here. What can I do to solve this problem, which is annoying and time consuming? I could send one .odt files, someone at Microsoft to look at, or what?

  Thank you
  Calle2012

  The problem seems to be the shlxthdl_x64.dll:

  WARNING: Unable to verify timestamp for shlxthdl_x64.dll
  ERROR: Module load completed but symbols can be loaded for shlxthdl_x64.dll
  Failed to load image C:\Windows\System32\ieframe.dll, 0n2 error Win32
  WARNING: Unable to verify timestamp for ieframe.dll
  Probably caused by: msvcr90.dll (msvcr90 invalid_parameter + 70)

  The shlxthdl_x64.dll, which is at version 3.6.1.2, is a component of LibreOffice.

  The error that you are experiencing seems to be a known issue:

  https://bugs.freedesktop.org/show_bug.cgi?id=52078

  This problem can be fixed in an update of LibreOffice, so make sure you're running the latest version.

  If you are running the latest version of LibreOffice or if the error persists you can try the following:

  Go to the following folder:

  C:\Program Files (x 86) \LibreOffice 3.6\program\shlxthdl

  In this folder, right-click and rename the shlxthdl_x64.dll to shlxthdl_x64.old.

• Why Microsoft FSX crash under Windows 7 64-bit?

  Bought a shiny new Dell XPS with core i7, 8 GB RAM Windows 7 64 bit and I thought that I have now would govern the sky, but not so! FSX crashes just with the introduction screen. Unrecoverable error, the information collected a million times and it not there no help anywhere!

  Hi Edifalos,

  I suggest you try the steps in the order in which they are presented from the link below

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  If you still have questions get FSX for work, so I suggest you to visit the Flight Simulator and games for Windows Forum forum to see if they have any suggestions on this subject.

  http://forums.gamesforwindows.com /.

  http://support.Microsoft.com/GP/cp_flightsim_master#TAB4

  Hope this information is useful.

• Windows 8 + FSX Crash and fatal errors

  I continue to have problems with the same mistakes, can anyone help:

  FSX.exe

  10.0.61637.0

  46fadb14

  PMDG_737NGX. DLL

  1.0.0.0

  4f5162a3

  c000041d

  00016c 30

  3f98

  01ce8116ede718af

  C:\FSX\fsx.exe

  C:\FSX\GAUGES\PMDG_737NGX. DLL

  5e3db6d6-ed0b-11E2-be93-08606e0dfd97 and FSX.exe 10.0.61637.0 46fadb14 c:\windows\system32\uiautomationcore.dll 7.2.9200.16384 50108725 c0000005 00032a 88 40e4 01ce8118969d4359 C:\FSX\fsx.exe C:\Windows\SYSTEM32\uiautomationcore.dll 48380ece-ED15-11E2-be93-08606e0dfd97

  Hello

  The cause seems to be the two dll files ' PMDG_737NGX. DLL' and 'c:\windows\system32\uiautomationcore.dll '. Its possible that these two files are corrupted. I suggest you to repair the installation of Flight Simulator X. To repair disc insert the Flight Simulator X and click on "repair".

  If the problem persists, reinstall Flight Simulator X to do this:

  (a) press "Windows + R" on your keyboard to bring up the Run dialog box.

  (b) type "appwiz.cpl" in the list, select "Flight Simulator X" and uninstall.

  (c) Insert the Flight Simulator X disc and reinstall the game.

  Let us know the status of the issue.

• Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes.

  Notes crashing with El Capitan 10.11.6. Are updated recent bug fixes. It always sends Apple incident reporting, so I am surprised that they have not yet set. This is a brand new Apple iMac computer, I went for the best to have a trouble-free operation (I hate LAGS). But the computer hangs out sometimes which is disappointing. No one knows what to do to keep my computer running efficiently? In addition, someone at - it a solution to the issue with Notes crashing?

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Download and install the update of OS X El Capitan 10.11.6 Combo.
  6. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.