Fujifilm X100T is compatible with Camera Raw and Lightroom?

Similar Questions

• How to install the RC updates of my CC PS, camera raw and Lightroom?

  How to install the RC updates of my CC PS, camera raw and Lightroom? I downloaded the correct version on the site of the lab, but I can not always open my Nikon D-610 RAW files. The site says to follow the instructions on the screen, but I found none. Help please.

  Please ensure that you have downloaded to 8.3 ACR - CC for CC:

  http://labs.Adobe.com/downloads/cameraraw8-3-cc.html

  Please extract the .zip file downloaded to the desktop, and then run the .exe file.

  After a successful installation, try opening the D610 files, it should work.

  Kind regards

  Ashutosh

• Two questions about Camera Raw and Lightroom

  I am now shooting in RAW image format only and catalog images in Lightroom.

  My first question is: how to open an image in Camera Raw from Lightroom? When I right-click on an image in Lightroom, it gives me a choice to edit > Photoshop, but does not not the choice of editing in Camera Raw. In fact, when I'm outside of Lightroom and just double-click on one of these RAW images, it opens in Photoshop. What is going on? Before that I installed Lightroom, a double click on a RAW file would force the latter open in Camera RAW.

  My second question is: Lightroom seems to have all the same controls during processing of a RAW image as does plug in Camera Raw. Does this mean that I no longer need to open images in Camera Raw? I just did all my settings inside Lightroom? I guess that the xmp file is the same as modified in Lightroom or Camera Raw.

  Pleas put me straight on that.

  Thank you

  Ken

  Your second question:

  My second question is: Lightroom seems to have all the same controls during processing of a RAW image as does plug in Camera Raw.

  Responding to your first. Lightroom and ACR share code, rendering you get from Lightroom with the same parameters is therefore exactly the same as in ACR. What happens is that when you say "Edit in Photoshop", ACR is recalled by Lightroom and the development parameters are passed along. ACR then renders the RAW with these settings and open it in Photoshop. Then, because you already have a working for the settings interface, there is no point in showing them to you once again.

  Does this mean that I no longer need to open images in Camera Raw? I just did all my settings inside Lightroom?

  It depends on your workflow. I have more if open images in ACR directly like Lightroom offers a more effective interface in my opinion. Other people I'm sure that prefer the approach of Bridge/ACR.

  I guess that the xmp file is the same as modified in Lightroom or Camera Raw.

  Lightroom is not change the default sidecars. All changes are stored in the database. This allows you to have virtual copies with different parameters of development and more stuff like that. You can have Lightroom write using xmp sidecars "save metadata to file" in menu metadata in library or by turning on the automatic xmp file generation in preferences. There is usually no real point to do this however as "Edit in Photoshop" route works fine. It is really useful when you have a stream of mixed production that still use the bridge. If you share images with others, you are better of DNG, exporter or subsets of images as catalogs with the included images.

• Help with camera raw and photoshop

  How to open files camera raw in photoshop CC15 shot with Nikon D3200?

  Hi lasdoc,

  • Please report the exact error you get when you open a raw file in Photoshop.
  • Check what version of Camera raw is installed on your computer.
  • Open Photoshop.
  • Select help > about plug-in > Camera raw(see the version number on the upper left corner). The most recent is 9.3.1

  Kind regards

  Assani

• camera raw and lightroom 4 problem

  In Lightroom 4, how can I open camera raw when I select Edit in photoshop

  Hello

  What version of photoshop are you using?

  One way is to use Edit in > open as smart object in Photoshop and double-click on

  on the thumbnail of the smart object in the layers panel to open the photo in camera raw.

  

• Camera Raw and CS4

  I downloaded the latest camera raw. Since I have CS4 I also had to download and install the Application Manager, has done this.  I am still unable to install the raw file of the camera, any suggestions on how to do it?

  CS4 is only compatible with Camera Raw to version 5.7.

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  To work with the Raw files of new cameras, you will have to convert to DNG using the free DNG Converter and then edit the DNG.

  vailable.html http://blogs.adobe.com/lightroomjournal/2012/12/Camera-Raw-7-3-and-DNG-Converter-7-3-Now-a

• Why are my unsaturated when photographs open in Camera Raw and Photoshop?

  Hi all

  I have problems with Camera Raw and Photoshop and I do not know how to proceed. My pictures are very different when it is open to these programs in comparison when open in Adobe Bridge and camera. Photoshop and Camera Raw change elements of photographs in a negative way (for me). I'll try to use a screen shot to illustrate.

  The left image is seen in Bridge and on my camera and I want that image to look like more or less. Unfortunately, when open in Camera raw (figure on the right) the colors are very obviously different. How can I prevent that from happening. Hope that his and easy difficulty because I'm enough experianced by using this software.

  Thank you.

  My best guess is that you're displaying overview integrated camera into Bridge. Check the grid icon in the toolbar and see if it is set to prefer embedded or high quality. Uses of quality high ACR to regenerate previews feature current development settings, or, if no parameters are applied, running by default.

  Glimpses of the bridge are in fact of sRGB, and images with larger ranges tend to look breath.

  I don't know how experienced you Raw/ACR, but it should be noted that embedded previews are based on settings in the camera control setting of the image, contrast, Saturation, etc.. Whereas previews ACR are based on ACR defaults (which you can modify to your taste), camera profile and development settings. ACR does not take into account most of the settings of your camera.

• New in camera raw and have a basic question

  Hello

  I have just started playing with camera raw and when I make the changes and say, I am able to open this image and continue with the corrections, which is great.

  but...

  If I open an image that has been edited in camera raw, and I want to revert to the original and start again, how could I do?

  Thank you

  "babs

  I don't know if you've made a small lack of hitting, but you don't want a "Reset Camera Raw default" - that affects all files opens (assuming that you have saved by default custom for your camera in the past).

  You want to just check the Camera Raw default is near the top to influence the images selected entry only.

  -Christmas

• Incompatible Lightroom adjustment brush with Camera Raw

  I love Lightroom's adjustment brush, but I find it annoying that I can't use it to make saturation all the way in monochrome, even with the cursor of saturation completely rejected. Today, I noticed that in Camera Raw 5.4, the same is NOT true - you can remove color completely with an adjustment brush.

  Surprised at this difference, I wondered what would happen when I loaded the file ACR corrected in Lightroom. And now Lightroom showed the result of the adjustment brush the same way as ACR, with all the colors removed. Excellent!

  But what will happen if I changed the adjustment brush in Lightroom? He "forgets" what I had done in ACR and restore its normal behavior? No, he continued to behave as it had done in ACR. But in the same photo, a brush created in Lightroom does not have the same way. Obviously, it was something to do with what program created the brush.

  Then I took a glance to my XMP file, and it became (slightly) clearly what is happening. It is one of the XMP attributes for the brush created in ACR:

  < crs:MaskValue > 1.000000 < / crs:MaskValue >

  And here's the same attribute for the brush created in Lightroom:

  < crs:MaskValue > 0.375000 < / crs:MaskValue >

  The next question is obvious, what happens if you replace MaskValue with 0.375000 1.000000? Answer: The brush begins to behave like a brush in ACR.

  Now, it's kind of cool. I can get the behavior I want in Lightroom, by editing the XMP file by hand. On the other hand, the editing XMP files isn't really my favorite thing. Is there some settings in Lightroom that allows to reach a MaskValue 1.000000 for adjustment brushes? I couldn't find one, but well, there are a lot of settings...

  In Camera Raw and Lightroom, the value of the mask is determined by the setting of cursor y density. Therefore, when there is a difference between the two, it is certainly because the cursor of the density defined differently. In your case, one is set to 100 and the other 37.5. Do both the same and the effect of the brush must be identical.

  Edit: as mentioned in Jao - flow will also affect mask value

• Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW

  Bridge 5.0.2.4 with camera RAW 8.4.0.199 ON a MAC 10.10.1. Try to update camera RAW 8.7 to get my canon 7dMK2 raw files to work. But the update I have the last update! Witch, I did not clearly. And my Photoshop have different camera RAW plug-in. 8.4 the old and the new 8.7. But it does not work. Have removed and reinstalled several times. What is going on? Why can't update bridge to the last version 8.7 or read my raw files from the Canon 7dmk2?

  Try this:

  http://blogs.Adobe.com/Crawlspace/2011/03/keeping-Photoshop-up-to-date.html#NotConnected

• CC 2015 not open in photoshop with Camera Raw CR2 raw files, please help?

  It works very well so far.
  I have a mac OSX 10.8.5, photoshop is installed and up-to-date - CC (2014). I own a 700 d camera Canon. I have not recently updated the operating system of my computer, photoshop and camera raw have been working well since creative cloud last updated - a month ago?
  When I try to open a raw file (open with > adobe photoshop)
  

  I get this error message
  

  I had this also when I tried to go file > open recent > IMG_138.CR2. So I went to photoshop > Preferences > camera raw... to see what was going on and I got a different error message

  I had this same error message when I tried to look in photoshop > about plug-in > camera raw.
  Camera Raw works not in Photoshop Elements.
  

  But this makes no sense because I can open raw files yesterday, everything worked fine. In Photoshop Elements, I went to Photoshop Elements > about plug-in > Camera Raw, but all I get is the following:
  

  When I click it, it disappears. When I go to photoshop elements > Preferences > plugins, camera raw does not appear:
  

  
  Photoshop Elements open digital, negatives, but Photoshop won't and I get the same dialogue "cannot recognize the file type. I doubt that using a digital negative converter / raw file will change that. I need camera raw to work in photoshop.

  I restarted my computer, when I uninstalled and reinstalled photoshop does not solve, but again, I got the same answer.

  
  My computer must have a certain amount of available storage space for camera raw to run? The only thing that has changed on my computer since I was last able to open files in photoshop raw is the amount of space on my computer - since the importation of raw files from my camera using image capture I have only 32,37 GB left on my computer (raw files take up a lot of space!). I made were not all other massive applications opened while I did it then he should have enough ram. I have an external hard drive, I can move pictures to to free up space, but if this should not be a problem for camera raw then I don't know what else to do.
  
  The only other thing I can think who might have caused it, that's the last time I opened photoshop a few days ago, I received this warning message
  
  I just clicked 'OK' and after that the raw camera seemed to work perfectly fine. It worked as he normally does, so I assumed nothing was wrong and that the acceleration of the GPU or anything that was is no longer disabled. Now, I can't even open dialogue Camera Raw Preferences.

  I looked in the application of plug-ins, I'm not sure what is supposed to be there but Camera Raw is certainly not. The generator folder is empty - is this a problem?
  

  I tried looking through the other threads on this kind of problem with camera raw, but I have seen one for 2015 of CC, and still less one where he was working very well and now is not, or that the operating system has not been updated recently. I prefer not to update the operating system of my computer, it would be the first thing you suggest. I don't see how it could be the fault of the operating system - it worked fine until today. He managed the CC perfectly well up-to-date.

  It is vital that Camera Raw is operational, I need it for my college photography class work and assignments. It would be pretty boring and very embarrassing if the only way I could get my work would be to travel to use the computers on campus, especially since I'm paying $28 (NZ) a month for this software (which is more than the city $14,99 per month for students of secondary and tertiary).

  Help would be very appreciated!

  Kind regards

  Ellie Crowe

  The ACR 7.4 700 d or newer of the 70 d (if there was typo) requires and ACR, 8.2 or newer.

  PS CC 2015 as the title says needs OS X 10.9 or newer so PS CC 2014 is the most recent CC PS, you can run on your 10.8.

  11 elements of Photoshop that supports RTAs 7.1 also supports ACR 7.4, so you should be able to update your PSE11 to 7.4 of the cab and open the 700 d raw files.

  --

  It is unclear why your PS CC 2014 cannot be updated at least 8.2 RTAs that must run on your old operating system.

  I would be completely uninstall the PS CC 2014, reboot, then reinstall and use the help / updates to see if you can get a new Camera Raw plugin that works.

• I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE. Help me please

  I have Photoshop CS5 extended version 12.04 with camera RAW version 6.7. It does not work with files. NAVE generated by NIKON 610. What can I do?

  Hi danielem,

  Need you minimum Photoshop CS6 & Camera Raw version 8.3 use of Nikon 610 RAW files.

  

  see the related link: supported by Adobe Camera Raw devices

  However, if you cannot upgrade to Adobe Photoshop CS6, then you can use the DNG Converter to convert your images to DNG and use it with Photoshop CS5

  Mac: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.3

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.3

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Photoshop CS5 is open my jpg images in Camera Raw and me leaving no way to change them.

  I use cs5 with Sawgrass sublimation inks and selling on Amazon.  I use Photoshop to contact The Sawgrass driver to open my listings.  When I open a list in CS5 it opens the jpeg listing in Camera Raw and gives me no way out other than to shut down the computer.  Anyone know what may be causing this?

  Jim

  Hi jimjay,

  Greetings!

  What is the format of the file that you have received?

  What is the size of this file?

  What is the operating system and version installed in the machine and other information so graphic card?

  What is the exact workflow?

  If possible please send us the screenshot.

  Please answer questions above so that we can better help you?

  Concerning

  Jitendra

• I use Adobe Photoshop elements with Camera Raw 7.1 11 I am trying to load my Canon 70 d raw file. It will not load. How can I update my version of Camera Raw?

  I use Adobe Photoshop elements with Camera Raw 7.1 11 I am trying to load my Canon 70 d raw file. It will not load. How can I update my version of Camera Raw?

  ralph47 wrote:

  I use Adobe Photoshop elements with Camera Raw 7.1 11 I am trying to load my Canon 70 d raw file. It will not load. How can I update my version of Camera Raw?

  The answer lies in this faq:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  PSE12 cannot be updated to the required version of ACR, 8.2, you need PSE13.

  This faq has links to see the whichACR version are necessary for a camera and which is supported by your version of elements.

  It also has links to download the free Adobe DNGconverter which is a stand-alone software to batch convert your files CR2, DNG format raw that your elements version can read and modify.

• Camera RAW and Photoshop do not support my new Panasonic Lumix FZ70 RAW photos

  I have a new digital camera, Panasonic Lumix FZ70.  When I try to open RAW images on my compupter or in Photoshop CS5.1, I get a message that says that Camera Raw and Photoshop do not support this camera RAW images.  What can I do to fix this? Thank you!

  Support is available with version 8.2 of the cab who works with PS CS6 and CC.

  DNG Converter can be downloaded from the following link:

  vailable.html http://blogs.adobe.com/lightroomjournal/2013/09/Camera-Raw-8-2-and-DNG-Converter-8-2-Now-a

  Kind regards

  Ashutosh