A direct http TCP connection requires any service book?

Similar Questions

• IP SLA TCP connect to FQDN - JIT or TCL required?

  Hello

  I have a Setup today where we test the accessibility of a service through the SLA of IP TCP connect the probe. This is done to an IP, straight forward until present. Unfortunately they ISP will not be able to provide a static IP address in the future which means that we do not know the IP address of the service that we test.

  We wanted to solve this problem by providing a FULL domain name to IP SLA probe instead, but unfortunately, it seems it solves the FULL domain name directly and then between an address IP address to TCP connect command. Not very elegant! Of course, this means that the probe would not abreast of any changes in the hostname-> mapping of IP addresses.

  Is it possible to solve this problem with the EEM or TCL somehow? An option that I thought was to make a ping to the host name and check what IP address it is resolved to. If the IP address has changed then update the ports TCP connect command. It's a bit beyond my abilities scripting yet. Is this possible in EEM or that would require TCL?

  Someone told me that IOS is cached responses to requests for four hours, what works well in this situation, of course. Maybe it's possible to clear the cache to ensure that the query contains up-to-date information?

  Grateful for any input from the community can bring.

  You can clear the cache using ' clear host. "  So you could automate this using an applet that can run, for example, every 10 minutes:

  Event Manager cmdlet get - ip

  watch dog timer event duration 600

  order cli action 001 'enable '.

  action 002 cli command "clear host."

  cli command action 003 "ping ip HOST repeat 1"

  action 004 regexp 'echoes in ([0 - 9.] ". (+)' $_cli_result match ip

  005 action puts 'Do what you want with $ip now.

• My computer does not connect to the Internet. Event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."

  Hello!
  I am working on a Dell Inspiron 1300 laptop for a friend. She has Windows HP Home Edition, SP3 installed.
  He said that Saturday night he started to act funny and wouldn't connect to the Internet. There were a few popups then begins, and he did not know if they were connected to not go on the Internet.
  He had the rootkit.zeroaccess infection. I used Combofix to remove it. It won't always get on the Internet, either via a wi - fi or ethernet connection.
  Looking at the event viewer, I see event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."
  Then, event 7001, "(NLA) network location awareness service depends on the service protocol driver TCP/IP which could not start due to the following error: the dependency service does not exist or has been marked for deletion.".

  I copied ipsec.sys from another XP Home machine which worked and stuck in the Windows\System32\drivers directory and it still does not work.

  Any ideas are greatly appreciated!

  Dave

  Hello

  See this link:

  http://TechNet.Microsoft.com/en-us/library/cc958861.aspx

  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=7003&EvtSrc=Service+Control+Manager&lcid=1033

  Let us know the results.

• Drops network connection randomly, error message in Event Viewer ' TCP/IP NetBIOS Helper service was successfully sent a stop command, error code: 0 x 40030011.

  Original title: network Drops randomly: the TCP/IP NetBIOS Helper service was successfully sent a stop control

  The given reason was: 0 x 40030011 [OS: network connectivity (planned)]

  I want a definitive answer for this! For some reason any that never seems to have been resolved. I'm on a Samsung qx410 computer J01 laptop with windows 7. The wireless adapter is an Intel Centrino Advanced - N 6250 AGN. I've tried making it so the adapters could not be disabled for reasons and basically all of the steps for this energy saving. I did everything with the drivers and software. In the event log, it has this event where he falls TCP/IP NetBIOS support apparently without reason? I then immediately lose my connection and it never seems to happen with the rhyme or reason. Any suggestions? It doesn't seem to be a hardware problem either. Where is microsoft on this topic? It seems to be a Windows 7 problem...

  Hello

  1 have had any changes made on the computer before the show?
  2. do you have a wired or wireless network connection?
  3. do you get an error message? If Yes, what is the full and exact error message?

  If you use try Method 1 of the Wi - Fi connection.

  Method 1:
  Disable authentication IEEE 802. 1 X.
  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:
  (a) click Start, type ncpa.cpl, and then press enter.
  (b) with the right button of your wireless network connection and then click Properties.
  (c) click the wireless networks tab.
  (d) under preferred networks, click your wireless network, and then click Properties.
  (e) click on the tab authentication, click keyar authentication to enable IEEE 802. 1 X for this network check box, and then click OK twice.

  Method 2:
  Try the procedure described in the link to create a new network profile.
  Create or modify network profiles
  http://Windows.Microsoft.com/en-us/Windows7/create-or-modify-network-profiles

  Method 3:
  If the problem persists, you can try the procedure described in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4:
  If the problem persists, you can try to reset the Internet Protocol.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 5:
  If still the issue remains, control whether or not the service is set to automatic.

  (a) click Start and type services.msc in the search box.
  (b) search of the computer browser.
  (c) series the service to automatic.

  Steps to set the auto services

  a. Locate the service (computer browser)
  b. right-click on the service
  c. If the service is stopped , then Start the service
  d. Select Properties
  e. and in the Startup type , select Automatic.

  Hope this information is useful.

• Using the BIS network but with guidance TCP connection string

  I just want to clarify if this is really possible.

  Being a small/medium business, that we can afford to be a partner just blackberry alliance partner to win have BIS-B connection size.

  In any case, I just want to clarify that if a device is registered with BIS, is it still possible for my application to use the direct TCP connection string (with AFN etc) to extract information via web services and socket connections?

  I read this, I just want to be sure before making further development to 100%

  http://supportforums.BlackBerry.com/T5/Java-development/connecting-your-BlackBerry-http-and-socket-...

  most of the time: Yes. It is dependent on the vendor however, some may charge extra, for example.

• Problem connecting to the service of the consistency

  Hello
  
  I get following error when I try to connect to the service of coherence through * (ICacheService) CacheFactory.GetService ("ExtendTcpProxyService") *;
  
  I use c#.
  
  * "could not connect to Socket to one of the remote addresses specified in the configuration of addresses item 'remotely';" Make sure that this element contains an address and a port of a TcpAcceptor running. "
  
  Here is the configuration cache on the server side:
  
  <? XML version = "1.0"? >
  
  <!--
  | Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
  |
  | Oracle is a trademark of Oracle Corporation and/or its affiliates.
  |
  | This software is confidential and exclusive information
  | Oracle Corporation. Not to reveal the confidential and
  | proprietary information and use it only in accordance with the
  | terms of the license agreement with Oracle.
  |
  | This notice may not be removed or modified.
  ->
  
  <! SYSTEM cache-config DOCTYPE "cache - config.dtd" >
  
  <>cache-config
  < cache-system-mapping >
  <>cache-mapping
  < name-cache > ACCOUNT < / cache-name >
  < name of the schema - > dist-default < / system-name >
  < / cache-mapping >
  < / cache-system-mapping >
  
  <>- cached patterns
  < distributed plan >
  < name of the schema - > dist-default < / system-name >
  < serializer >
  > class name < com.tangosol.io.pof.ConfigurablePofContext < / class name >
  < init-params >
  < init-param >
  type string < param > < / param-type >
  < param-value > custom-types-pof - config.xml < / param-value >
  < / init-param >
  < / init-params >
  < / serializer >
  < support-map-plan >
  < local-scheme / >
  < / support-map-plan >
  < autostart > true < / autostart >
  < / distributed plan >
  
  < proxy-system >
  < service name > ExtendTcpProxyService < / service-name >
  < number of threads > 5 < / thread count >
  < Acceptor-config >
  <>tcp-Acceptor
  < address - >
  localhost < address > < / address >
  < port > 9099 < / port >
  < / local-address >
  < / tcp-Acceptor >
  < serializer >
  > class name < com.tangosol.io.pof.ConfigurablePofContext < / class name >
  < init-params >
  < init-param >
  type string < param > < / param-type >
  < param-value > custom-types-pof - config.xml < / param-value >
  < / init-param >
  < / init-params >
  < / serializer >
  < / Acceptor-config >
  < autostart > true < / autostart >
  < / proxy-system >
  < / cache-plans >
  < / cache-config >
  
  Here is the config of cache on the client side:
  
  <? XML version = "1.0"? >
  
  <!--
  | Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  |
  | Oracle is a trademark of Oracle Corporation and/or its affiliates.
  |
  | This software is confidential and exclusive information
  | Oracle Corporation. Not to reveal the confidential and
  | proprietary information and use it only in accordance with the
  | terms of the license agreement with Oracle.
  |
  | This notice may not be removed or modified.
  ->
  
  < cache-config xmlns = "http://schemas.tangosol.com/cache" >
  < cache-system-mapping >
  <>cache-mapping
  < name-cache > ACCOUNT < / cache-name >
  < scheme name > expand-direct < / system-name >
  < / cache-mapping >
  < / cache-system-mapping >
  <>- cached patterns
  < remote-cache-system >
  < scheme name > expand-direct < / system-name >
  < service name > ExtendTcpProxyService < / service-name >
  < initiator-config >
  <>tcp-initiator
  <>remote addresses
  > the socket address <
  localhost < address > < / address >
  < port > 9099 < / port >
  < / socket-address >
  < / remote-address >
  < / tcp-initiator >
  < outgoing-message Manager >
  < request-timeout > 30 s < / timeout request >
  < / Manager of outbound messages >
  < serializer >
  > class name < Tangosol.IO.Pof.ConfigurablePofContext, consistency < / class name >
  < init-params >
  < init-param >
  type string < param > < / param-type >
  < param-value > Config\pof-config. XML < / param-value >
  < / init-param >
  < / init-params >
  < / serializer >
  < / initiator-config >
  < / remote-cache-system >
  < / cache-plans >
  < / cache-config >
  
  Please help me on this.
  
  Concerning
  Nitin jegou

  Hello

  It may seem like a stupid question, but running the cache server and the .net client on the same host? As you have localhost in the hostname of these two configurations, this obviously does not work.

  You are running on a computer with only a single IP address? If it has more than a localhost address that uses the cache server may not be the same as the .net client. I had this happen to me on a Windows PC where for some reason any WebCam installed on this computer has also installed its own network drivers and messed up mapped as localhost IP addresses. According to your newspaper, listen to the Proxy are spread over 192.168.0.19 port 9099 so you can check that the .net client attempts to use the same address. Or you could remove the localhost issue by changing your configuration files to use the actual host name of your machine instead of "localhost".

  I just read your original post once again and I'm curious to know why you do that

  (ICacheService)CacheFactory.GetService("ExtendTcpProxyService");
  

  What do you want an instance of the Proxy Service on the client, because there's not much you can do with it?

  JK

  Published by: Jonathan.Knight on March 16, 2010 08:41

  Published by: Jonathan.Knight on March 16, 2010 08:42

• can not connect to any microsoft web site.

  Unable to connect to any microsoft web is located.

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Photosmart HP 7520: HP Photosmart 7520 does not connect to web services

  My printer suddenly stopped connecting to the Web Services a month ago. I had already used web services successfully for two years, then my computer infected with malware and ruined a lot of things. I guess that it also affected the printer since it is at the same time ceases to function properly. I can print wireless very well all of my devices, but doesn't connect things like regular printable.
  
  I tried restaring the printer and the restoration of the default network printer. I also tried the steps listed in this forum http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-Photosmart-7520-unable-to-connect-to-Web-Services/td...

  Hello

  Apologies for jumping!

  For the Photosmart 7520, the latest firmware must be installed in order to maintain a connection to Web Services.

  The firmware can be installed on any Windows PC via the following link:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462/swItemId/OJ-113641-5

  Kind regards

  Shlomi

• HP photosmart 7525: hp 7525 unable to connect to web services

  I recently bought an Imac, and now I can't get my hp 7525 to analyze correctly. It says unable to connect to web services. I tried to uninstall wirless and re-login.  Help, please!

  Hello

  My apologies for jumping.

  To add more, the latest firmware MUST be installed to maintain connectivity of the web services.

  Click on the configuration icon and select Tools, then print a printer status report.

  Locate the firmware listed, if it is a value lower than ELM1CN1607AR (see "BOLD" kinds) you will be required to update the firmware.

  Unfortunately, a Mac OS firmware update utility is not currently available, so you must use a Windows PC to update the printer:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5286642/swItemId/OJ-113641-5

  Once obtained the latest firmware, try to use Web Services again and check for the difference.

  Kind regards

  Shlomi

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• Good method to reset the tcp connection after timeout error

  I have an application that I build that communicates with a Modbus TCP device.  If a communication occurs error I wish I could reset it TCP communication.  What I have is a control that raises an event when pushed.  In this case, I have a sequence that closes first the tcp connection and then opens a new connection.  My application starts and works very well.  To test the reset function, I removed the ethernet cable from the camera and waited until a timeout occurs.  I plugged the cable reset back to and pushed my control. Sometimes the reset will take place, but most of the time I'll get a timeout in the TCP vi open error.  After that, the only way I can establish communications must leave my application, disable and then enable the network device.  Then, when I restart my application I have communication with my camera.

  Any help would be appreciated on how I should be reset my TCP connection.

  Thank you

  Terry

  Terry S of a. in writing:

  I've attached an example vi (LV10) that shows just the connection TCP and Reset.  An error occurs when you try to run the open in the event of reset tcp protocol.

  As writing that your code should be fine. There is nothing inherently wrong with it. However, depending on the device, you communicate with you can try to restore the connection too quickly once you have closed the connection. The device allows multiple connections to it and may require some time to clean up the things on his end after you close a connection. An experimental basis try wait little time between TCP and the TCP Open shut it down. If possible you can try using Wireshark to see what is happening on the network. It may be useful to diagnose what is happening.

• HP Envy 7645: Envy 7645 unable to connect to web services

  I have a new 7645 envy that cannot connect to web services.

  I tried the things:

  Verified Internet access. "The report of ' the Web access test results" printers displays "No problems found"

  Checked the wireless connectivity by connecting to the Server Web Embeded printers

  I put statically (primary) DNS 8.8.8.8 and 8.8.4.4 (secondary)

  The IPv4 address is assigned by DHCP, so I changed to static (manually) assigned

  Re-checked wireless connectivity by connecting it to printing Embeded Web Server with static IP address

  Many printer restarts to ensure that the changes have taken effect. (Have you tried turning off and on again?) (HA!)

  Connected to the https://www.hpconnected.com website

  The printer is registered on my devices tab

  The State of the printer is 'offline' (I assume that this would change if the web services were working)

  Any help would be appreciated.

  Hello treadwayl,

  Welcome to the Forums of HP Support!

  Thanks for putting the time in to a very informative post on the ENVY of 7645 being is not able to connect to Web Services. When you try, what is the exact error or the message?

  I want to try the DNS of: Server DNS main = 209.244.0.3 & secondary DNS server = 209.244.0.4

  Reboot the router and the printer, then try again to connect.

  Let me know the out come, soon.

• Error of TCP connection when sending MODBUS for WAGO controller 750-881 orders after 113655 bytes of data have been sent

  Hi all

  I'm new in the world of labview and trying to build a VI that sends commands to a controller of the WAGO 750-881 at regular intervals of 10 ms.

  To set each of the WAGO comics at the same time, I try so to send the Modbus fc15 command every 10ms using Labview standard TCP write module.

  When I run the VI it works for about a minute before receiving an error message 56 telling me the TCP connection has expired. This strange thought, I decided to record the number of bytes sent via the TCP connection while running the program. In doing so, I noticed that the link broken after exactly 113655 bytes of data have been sent each time.

  Thinking can I have sent too many messages, I increased the delay of the loop of 10ms to 20, 100 and 200 ms, but the error remained. I also tried to play with the TCP connection timeout and the writing TCP timeout, but none of these had no effect on the problem.

  I do not see why this error occurs, such as the program works perfectly up until what brand 113655 bytes.

  I've attached a screenshot of the base VI (simply showing a MODBUS command sent every second) and a more advanced VI (where I am able to control each of the WAGO manually by setting a frequency at which the DO is to switch between ON and OFF).

  If anyone has any ideas on where the problems lie, or that I could do to debug more program this would be greatly appreciated.

  AvdLinden wrote:

  Hi ThiCop,

  Yes, the error occurs after exactly 113655 bytes each time. Time-out control, I would like to use is 10ms, but even that will rise to 1 s or 10s does not error, which leads me to believe that's not the issue (as well, do not add any delay in the while loop, so let it run at the maximum speed showed that the TCP connection is able to send all the bytes 113655 in less than 3 seconds again directed towards control of time-out) is is not the issue here).

  I tried the suggestion of Marco but having difficulty to translate the string returned in a readable string (rightnow the answer given is "-# +" ' ").

  As for your second suggestion, I've implemented something similar, where I created a sub VI to establish a TCP connection, send a message and then close the connection. I have now to build each message and then send the string to the Subvi, which sends the command to my application successfully. While not the most elegant method to solve the problem, it solves the problem of time-out, which means that I am able to send as many orders as I want. So in this sense, the problem has been resolved.

  If you have advice on how to properly read the TCP read the output, I want however to see if I could not get my first program to work because it is slightly more robust in terms of timing.

  MODBUS RTU TCP is a binary protocol, as you show in your base VI, where you put in the form the data stream using byte values. So you have to interpret the returned answer accordingly with the Modbus RTU spec in the hand. Now what is probably happening is that the connection is suspended after a while because you do NOT read data from the device sends as response to your commands. The TCP/IP stack cushions these bytes and at certain point of overflow internal buffers and the connection is blocked by the battery. So to add playback of TCP in strategic locations (usually after each entry) is the right solution for this. Is there a reason any that you do not use the PROVIDED Modbus TCP library?

• Could not connect to the service user profile Service.

  I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

  "Unable to connect to a windows service.
  Windows could not connect to the service user profile Service.
  This problem prevents limited users to logon to the system.
  As an administrator, you can review... »

  Shortly after this message, I get a windows error message saying:

  "Location is not available.
  C:\Windows\system32\config\systemprofile\Desktop is not accessible.
  Access is denied. »

  This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

  While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

  I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

  I'm not sure what that means at all, but I hope that one of you people can help.

  Thank you!

  Hello any Leafs fan,

  Thanks for posting on the Microsoft answers Forum.

  Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

  Usually, when the above error occurs, it is due to a corrupt user profile.
  The best way to fix this is to remove the user profile.

  • Go to the Start button
  • Right click on computer
  • Go to the properties
  • Go to Advanced System Properties on the left pane
  • Select the Advanced tab
  • Go to the user profile Section and click on the settings button
  • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
  • Connection again and you will get a new profile.
  • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

  The only way to identify what caused the error with the user profile is to try to reproduce it.

  If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

  If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

  You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
  To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

  Please post with your results and if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't connect to the service online help.

  * Original title: Microsodr online service

  I can't connect to the service online help. Nothing wrong with my internet connection. I can't connect eith helpdesk today even if I did yesterday. I have the reference code 13460435681 and spoke to Gagan Arora. Can you help me?

  You can get sponsored by Microsoft (but not necessarily free) support through the Office of response-online http://answerdesk.microsoftstore.com

  Phone: 877-696-7786 or 800-642-7676 (toll free US)

  ====================================================
  WARNING: Displayed AS IS without any warranty. MS MVPs represent or work for Microsoft.