Full-screen Fusion VM and Mountain Lion

Similar Questions

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• Script / keyboard shortcut to switch to full-screen Fusion

  Just upgraded to Yosemite and Fusion 7 of Mavericks and Fusion 6. I have a script (which I think some time ago, I've seen here) that before would switch me to a full screen of merger: -.

  Tell application "VMware Fusion"

  activate

  c the value "Windows 8 x 32 (was VLS XP Home Edition product key)"

  the thiswinID value (identifier of the article 1 of the (get all windows whose name contains c))

  the window id thiswinID index value 1

  tell the end

  I now get an error message "error" VMware Fusion has been an error: can not get all windows whose name contains \"Windows 8 x 32 (was the key to product XP Home Edition VLS)------". "" "number-1728"»

  "Windows 8 x 32 (was XP Home Edition VLS product key): is the name of the Virtual Machine.

  I wasn't able to track down this error code again, but does anyone have an idea why the script no longer works?

  Thanks for any thoughts

  Jim

  Unfortunately, it seems that VMware has decided to no longer support AppleScript that VMware Fusion 7 is not bundled with an AppleScript dictionary.  Take a look at the following discussion: VMware removed support for AppleScript in Fusion 7?

• I accidentally click to view full screen on Firefox and now I can't cancel it. My toolbar, bookmarks, etc. is not visible. While the browser opens, the bar appears but then pops up where it is not reachable. How can I disable the mode full screen?

  To view full screen on Firefox, I accidentally clicked and now I can't cancel it. My toolbar, bookmarks, etc. is not visible. While the browser opens, the bar appears but then pops up where it is not reachable. How can I disable the mode full-screen without access to display options?

  The F11 key

• I used "full screen" by mistake and wan t out is I see my toolbar.

  How to get out of the mode "full screen"?

  You can do one of the following:

  • Press the F11 key to turn off the Mode or full-screen.
  • Move your cursor to the top edge of the screen, tabs and some toolbars wil show, right-click in the empty space at the end of the tabs, click on "exit full screen".
  • See: http://kb.mozillazine.org/Netbooks#Full_screen

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Officejet 5610 and Mountain Lion

  Does anyone know if my Officejet 5610 all-in-one ' old' work if I update to Mac OS 10.6 to 10.8 (Mountain Lion)? Is there a driver?

  Thank you!

  Sheryl

  Hi sheryl,

  Yes, the drivers are available via Apple Software Update.

  There is no need to install any software of HP.

  Make sure the printer is powered on and connected to your PC, and then follow the steps below to install the printer:

  http://support.HP.com/us-en/document/c03378792

  Shlomi

• Photosmart C7280 and Mountain Lion

  My printer is connected wireless to iMac running on Mountain Lion. No particular reason, the computer can not find printer. Tried to delete the printer and reconnect with the IP address, but still no joy. All of the suggestions. I tested the printer and it is very well connected to the network.

  I would try a complete restart of network.

  Unplug the router.

  Press the power button to turn on the printer, if it is not already turned on.

  With the product, unplug the power cord at the back of the printer.

  Unplug the power cord from the wall outlet.

  Plug the router back in and wait for the lights on it to stabilize.

  Plug the power cord for the printer into the wall outlet.

  Reconnect the power cord to the back of the printer

  If the product does not light by itself, press the power button to turn it on.

  Try and let me know if it helps!

  Good luck

  Kyle

• Page will go full screen, jump autour and the toolbar will appear/disappear and page continues to change constantly. No virus/malware after scanning

  I have a laptop and I'm going on my home page (or go to another site from this page), the toolbar will back down in full screen. I'll go into 'tools' and disable the mode full screen (F11), then the entire screen "travel" up to down and will not stop. The toolbar will start to appear, and then back again and again, do not allow me to access anything whatsoever. It will last until I have completed the task with the future manager. I ran AVG, Spybot and malware (who, after working, I uninstalled) held, and nothing was found

  It started about a week ago, and to at about the same time I started having the ' does not ' when loading a page. This has never happened before, and there is no notice of virus/malware. I think to potential problems with the keyboard of the computer laptop, but computer says everything is functioning normally.

  If anyone has any ideas, it would be appreciated. I got the microphone. Security Essentials on my system, and tried to uninstall think there could be a problem there (computer ran incredibly slow, and this problem started a week after installation), and this shows it is not completely uninstalled and I get the error message whenever I start.

  Thank you and hope that someone knows something that can help.

  I have the same problem. Need help it fixing nothing I do works. I found another case of this in 2008 but does not say how it was resolved.

• OfficeJet 6500 and mountain lion

  I installed mountain lion and now my officejet 6500 will not print, or it prints, but after an hour or two after the print job is sent.

  I deleted the driver and reassembled using the apple software update, the problem persists. Any ideas out there?

  Ok

  Try to update the drivers by clicking on the icon Apple and then software update, restart and check any change.

  If there is no change don't try to install the package below:

  http://support.Apple.com/kb/DL907

  If the problem persists, make sure that the USB port used is not longer than 2 m long, with direct links to a MAc and not through a hub USB or extension.

  In case you have an iMac, make sure to plug the USB at the back of the Mac and not in the keyboard port which is not powered.

  It will be useful,

  Shlomi

• Full screen in CS5 and CS5.5 does not like CS4 menu items

  When you work in full screen, pressing 'F' key twice. PhotoShop CS 5 and 5.5 CS does not work with the menu item above. is there a problem with the latest version or what?

  Hi Syed

  Did you find the answer to your question?

  The forum you posted here specifically serves Photoshop.com, an online site and service.  For faster assistance of questions, I invite you to transfer your question in the forum for Photoshop CS5:

  http://forums.Adobe.com/community/Photoshop/General

• Satellite Pro A200 - Internet full screen is black and white

  I just got a Toshiba Satellite Pro A200GE-24 s 15.4 inch Core 2 Duo T5450 with Vista Home Premium. (2 days old)

  When you watch movies or youtube on the internet TV works fine. When I try to watch in full screen I get a black screen.
  I can still hear the sound of the film, but do not see the image.

  What's wrong? This can be solved? If so, how... I am a beginner so please respond with a detail or links if I need to download anything again.

  Thank you
  Jane

  Have you seen this thread in the forum?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29506

  -Right click on the drive flash streaming video
  -then click on settings
  -under the heading of the display must be set to the first tab,
  -Turn off the use hardware acceleration

  This should help

• Muse and Mountain Lion

  Is there any information, so Muse or Air is complatible for OS X Mountain Lion?

  Hello

  Muse is compatible with the Mountain Lion.

  Kind regards

  Abhishek Maurya

• Full screen with Firefox and Chrome

  Whenever I am watching a video screen sull with Firefox or Chrome, there will be a black and empty space on the right side of the screen and my mouse turns off. I don't have a problem with Explorer and I ddn can't have problems with Flash Player 9. The problem with Flash Player 9 is there is a lot of online videos that require Flash Player 10.

  Any suggestions?

  Thank you very much

  Phil

  Try to disable hardware acceleration (http://forums.adobe.com/thread/891337), or update the drivers of your graphics card.

• Cannot view full screen flash and silverlight media after Windows Update

  problems with flash and silverlight Muslim poor after windows update said updated the driver and will not play in full screen right.

  Windows Update told to update the driver of the GUI.  After I did my computer do not play in full screen with flash and silverlight. It makes a square with 3 inches on each side.  previously, it would fill the entire screen.  I already talked to Nivdia and they helped me to install again and it runs right is not their product.  I don't know if it's the Avermedia driver then that is the problem.  I have windows vista 32 bit.  When I try to click with the right button on the silvery light, it causes the failed computer.  I uninstalled flash light and silver and it does not solve the problem.

  Windows Update told to update the driver of the GUI.  After I did my computer do not play in full screen with flash and silverlight. It makes a square with 3 inches on each side.  previously, it would fill the entire screen.  I already talked to Nivdia and they helped me to install again and it runs right is not their product.  I don't know if it's the Avermedia driver then that is the problem.  I have windows vista 32 bit.  When I try to click with the right button on the silvery light, it causes the failed computer.  I uninstalled flash light and silver and it does not solve the problem.

  ===================================
  It might be worth a try to do a system restore to
  an hour before installing the updated video driver.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows 7 full screen games and desktop applications losing focus and stealing discussion questions

  NOTE: The updates at the top of this announcement, the original message is less than.

  UPDATES: here are a few updates and new information that I have gained since the original publication.

  Registry settings

  After doing a lot of reading, I found some registry settings that appear to solve some of the problems I see. All three were found in HKEY_CURRENT_USER-> Panel-> Desktop

  ForegroundLockTimeout: Has been reset for some reason any. I removed the key and restarted, but he is back to zero. This is why I looked at the default value of 200000 (decimal) and set it. After that, he stayed. \

  I saw two other keys HungAppTimeout, WaitToKillServiceTimeout, and WaitToKillAppTimeout and all have been set to zero. I deleted these registered.

  I have no idea what set these registry keys to zero, but after being put into default, I can now click on an application full screen reduced, and he returned immediately. I can still lose focus in full screen or desktop app, but not as often as before and now he is usually just badly behaved apps stealing focus rather than seemingly random events.

  I wonder if there is a patch that has changed these values, or a settings option that does. From what I read, they are sometimes twisted to allow faster restart and stop servers.  I don't have a software that would be while and manually set their and none have the people I know. One of them has confirmed that their box also has these set values zero and has no idea why.

  I hope this information is useful to other people with odd focus problems.

  ORIGINAL POST FOLLOWS *.

  I have a problem in Windows 7, which at first I thought a number of different problems, but I am more convinced that they are all connected.

  All of them started to happen around the same time - late January or February after a Windows Update - and largely the same or very similar issues affect 3 of my friends and co-workers running Vista and 7. Unfortunately my notes on the update happened while the time are missing, but all 4 of us have seen questions start at the beginning of the year in the January/February calendar, which makes it seem like they should be linked.

  NOTE: There were a few minor problems before even with the update, but nothing like what happened in early 2011. I had problems to update with Vista and 7 alone, but they were rare and sometimes fixable with registry hacks or it was an offending program, something did not like Aero, etc..  The questions below got a lot worse in early 2011 so they appear together in this post.

  I will describe each problem separately and the affected BONE and the symptoms, and I hope that some can make sense and help me solve the problem. Major problems first, then a few small problems and measures that I took to the to check follow after. Sorry for the long post, but it's a maddening problem affecting many people, and I want to be as complete as possible.

  Games not switching and the apps full screen #1: if I'm in a game fullscreen and I go to the office, it is very difficult to go back. If I click on the taskbar icon, nothing happens. I have to click on it repeatedly, often a dozen times or more before the application full screen or game is restored. It is most often with the games. Full screen I don't want not maximized, I mean where a program takes the entire screen. Games is easier to reproduce so far have all I currently use the question and variances in how it is difficult to come back in full screen are not significant between them.

  Apps full screen #2 focus lost: this happens especially to my friend running Vista, when you play the game full screen. She will play something like the Lord of the Rings Online and she loses the keyboard focus and the mouse, but the game is always full screen. Usually the only way that she can solve the problem is to use CTRL-ALT-DEL to bring up the Task Manager, which for some reason solves the problem and she can return to the game for a little while that. I run Windows 7 with another couple of friends and we can also see this question, it is much less common. Changing an old mouse seems correct for Vista for some reason any. 7 that it happens rarely, if hard to duplicate to see if changing the mouse would help. In any case, will and against a beautiful new mouse laser mouse is usually a horrible option.

  Office applications #3 lose focus: it affects two of us under Vista and 7. We will be typing in chat, email, anything... and the foreground app will lose focus. What catches there that is impossible to determine. In my case, I can occasionally see a taskbar popup button and then disappear immediately, but I have never been able to track it down. Running in safe mode or boot seems to have no effect on this, or disable all services, extension and program but by default Microsoft in Windows 7 and Vista. Its almost like a Microsoft program is to do. Also, even though I mentioned the taskbar icon appears briefly from time to time, which cannot be bound: it does not always coincide with the loss of focus and is not always present when the focus is lost.

  #4 desktop applications lose keyboard focus and the mouse: it's like the number #2 above, but happens at the level of the office. Unlike the #3 that the window does not lose focus, it is always in the foreground, but keyboard and mouse stop working. It is usually impossible to move to another window. Just like #2, the solution that we have so far is to use CTRL-ALT-DEL to switch to the Task Manager, which temporarily solves the problem. ALT-tab through windows does not work.

  Here are other minor problems that may or may be linked, because they seemed too much to start with.

  Switching away applications full screen takes more time: Windows 7 on my machine, switching off games full screen takes more time than he did in the past. It was a minor issue in autumn 2010 and became much worse early 2011.

  Some windows lost focus while being re-size: if I take the corner of some windows for re - size, sometimes the re-size operation stops until I release the mouse button, as if he has lost the focus. Color of the window indicates usually focus however is still there, and grabbing the corner once again we will move me a little more. It may take several tries to get the window size as I want, as the re-size operation closes several times before I release the mouse button. This affects only 2 of the 4 people I talk so much that I can tell from our conversations and shared between Vista and 7. Both of us have Logitech mouse it might even be a driver problem, but using a mouse cheap test has not fixed the problem with me.

  Firefox: Firefox repeatedly will "dim", where Aero makes the window lose color to indicate that the application is not responding. It didn't happen before January 2011 for any version of Firefox.

  Concrete results to track down the problem:

  I ran programs like WhatHang and others who are trying to catch the programs that are suspended, stealing focus, etc.. Hours of testing found no results except that Firefox crashes frequently. Disable Firefox doesn't solve all the issues however, so I guess that its not related.

  I tried booting safe and clean, and they have had no effect. Secure boot is rather useless since I can not usually run programs that show the problem more easily. I also tried turning off everything except what comes with Windows 7, and it had no significant effect.

  I tried to use a different mouse. While it helped a bit with one of my friends, it only helped me so far. Different mouse drivers do not seem to help either. I also tried various nVidia without significant information acquired or corrective drivers.

  I also ran through various other ideas here as the race of the file system scanner and so on and not found any problems with my system, and where I could help my friends do and they also found nothing of note with maintenance and verification tools.

  My friends and co-workers: most of them are not local to me, so my focus of their issue has been rather limited. The main thing that we all have in common is that we had some minor problems in the past, as in 2010, and they've all got a lot worse in early 2011. Unfortunately none of us kept of records accurate enough to indicate any special updates that might have caused it.

  In any case, I apologize for the log message, but this issue emphasis is maddening. Its become a frustration serious then I thought to post information on the problems which seem related would be the more useful approach.

  I am a graduate of comp-sci systems and a companion systems programmer, and I have tried everything I can think of to debug and isolate problems, symptoms, etc. and had no chance. My friends are usually illiterate computer so that they are even more perplexed and frustrated by this problem. In my reading the forums, I see a lot of Windows Vista and 7 discussion questions, but rarely a lot of details, and when a problem is identified, it this far does not apply to me or my friends.

  I am happy to provide any other details I can.

  Updates:

  I forgot to mention that I have a Setup dual monitor. Aero seems unhappy with it, a lot of flicker when switching to full screen in games and other applications. I guess its because a single display off Aero while the other has it we or maybe not accelerated. Remove the second screen does not solve the problems I see, but I mention it in the interest of further development.

  I want to just chime in that I see similar (but not exactly the same) behavior and time seems to match as well. Among the updates must have messed something up. I forgot my Cardinal never update rule anything :/

  In any case, I have a few specific questions all problems related to full screen/window/input. When you play the Witcher, when you look at, if the mouse touches the edge of the screen, it stops, thus giving a very narrow range of angles I can watch from. Baldurs gate, as soon as I hit any key, I can't click on anything whether (and what I typed does not appear). Looking for police 3 (dosbox) it works fine until I hit a key, and then the mouse bounces oddly around the screen. If I alt - tab, in these 2 cases to last and go back, the problem is solved until I have a button again. In the case of the Witcher, if I alt tab and click the icon to the taskbar, it seems this problem, until I have a press.

  And I'm sure I had none of these problems a few months ago. I have tried everything I can think :( I tried the registry settings, but they do not seem to help.

  Edit: Oh, almost forgot. Whenever I click on full screen on an online video, like youtube, it appears in the background behind other windows, and then I have to click on it in the background to bring it forward. Very weird. Not sure if it's related. I'll try to change my video drivers... So boring when everything was working fine a few months ago.

  Edit 2: Do not take into account my post, I had a program called synergy race (usually use a mouse on multiple computers at the same time). Apparently, he was the problem.