Function code refactoring using breaks "Move."

Similar Questions

• Does anyone know how to use the movement of scroller with the function of the fluid width?

  Hi all

  Does anyone know how to use the movement of scroller with the function of the fluid width?

  Thanks, Federico

  This feature is not yet implemented.

• I WANT TO CHANGE MY CODE TO USE THE LEFT BUTTON = PREVIOUS IMAGE / RIGHT OF THE IMAGE NEXT TO ANY KEY KEYBOARD = NEXT IMAGE. HERE IS MY CODE.

  I WANT TO CHANGE MY CODE TO USE THE LEFT BUTTON = PREVIOUS IMAGE / RIGHT OF THE KEYBOARD = NEXT IMAGE TO

  ANY KEY = IMAGE NEXT. HERE IS MY CODE. PLEASE HELP ME OBI WAN KENOBI, YOU'RE MY ONLY HOPE:

  Stop(); stage.addEventListener (KeyboardEvent.KEY_DOWN, changeSection); function changeSection(event:KeyboardEvent):void {switch (event.keyCode) {case Keyboard.RIGHT: nextFrame(); break; case Keyboard.LEFT: prevFrame() ;}}}}

  Your problem seems to be a matter of not understanding what version of the code that you use compared to what your file is configured to use.  Your other display uses AS2, so if you want this to work you must set the parameters of publication for AS2.

  If your file settings are for AS3 code that show you in this announcement will be suitable for this because it is the AS3 code.  The function would change to what is shown below.  Mgiht want to use a listener KEY_UP instead of a listener KEY_DOWN.

  function changeSection(event:KeyboardEvent):void {}

  nextFrame();

  }

• I can't publish a file using Windows Movie Maker despite after every single step and instruction

  I use Windows Movie Maker c. 5.1. (Build 2600) on a computer running Windows XP Professional 2002, SP 3. I try to publish a movie file which is a revised version of a WMV file. In other words, the original file is a file WMV is 534 MB.  I am editing the film by dividing and by deleting scenes, adding transitions and titles.  I am able to save the file (for a WMM file) but impossible to publish the movie.  I checked that (i) the files are in the correct location, (ii) the file does not exceed the limit of 4 GB, (iii) the destination does not exist (I tried everything from my desktop to video files).  I tried every possible resolution and the file type.

  I would change the software of movie at this point if I had not invested so much energy and time behind this project.  Help, please!

  Hello not happy with WMM,

  You get an error message when you try to publish?  If so, what is it?

  One thing you might try is breaking your video into 3 or 4 smaller sections and see if they work / will be published separately.

  See you soon

• error code 6. trying to move the 11 items

  error code 6. trying to move the items 11 to an external hard drive to a newer version - best computer. I have a number of series for less than a year.

  How can I move the program? Thank you

  You do not move programs, install you them.  If you need to download PSE11, you can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 11:

  l http://prodesigntools.com/Photoshop-Elements-11-Direct-Download-Links-PSE-Premiere-pre.htm

• Trying to figure out a Code that uses the [i] syntax

  OK I'm having a grip on the use of loops in flex and I found somewhere the following code that uses a for loop. It is essentially a function that creates multiple labels for all elements in an object. One thing I do not understand what is the [i] on line 5 i.e. (myArray [i]) or specifically what the purpose of these hooks in situations like these are used for. It refers in search of all the strings in the array (as defined on line 3) as I assume it is? It's just quite confusing. Can someone point me to a guide on the syntax of hooks and what they mean or help out me? with an explanation? See you soon.

  private function createLabels():void{
  
  var myArray:Array = ['one', "two", 3];
  
  for(var i:String in myArray){
  
  var myLabel:Label = new Label();
  myLabel.text = (myArray[i]);
  myBox.addChild(myLabel);
  }
  }
  
  
  

  You've probably seen these, but here are some links that may help.

  access http://help.adobe.com/en_US/FlashPlatform//Reference/ActionScript/3/Operators.html#array_a

  http://www.Adobe.com/LiveDocs/Flash/9.0/ActionScriptLangRefV3/array.html

  What's happening essentially is that the loop 'for' runs through each element of the array.  Don't be confused by the fact that two of the elements of the array are strings and one is a whole number - variable I being a string has nothing to do with the data type of the elements in the table.

  The following code:

  private function createLabels():void
  {
       var myArray:Array = ['one', 'two', 3];
  
       for(var i:String in myArray)
       {
            trace("i = " + i);
            trace(myArray[i]);
       }
  }
  

  gives the following results:

  i = 0
  one
  i = 1
  two
  i = 2
  3
  

  We can see that the loop 'for' is the allocation of the index number of each element of the array, not the real element array ('one', 'two' or 3) to the variable i.  If appellant myArray [i] same as calling MonTableau [0] is the first time in the loop.  This type of loop 'for' is just a shorter way to do the following, which produces exactly the same results:

  private function createLabels():void
  {
       var myArray:Array = ['one', 'two', 3];
  
       for(var i:int = 0; n < myArray.length; i++)
       {
            trace("i = " + i);
            trace(myArray[i]);
       }
  }
  

  Hope that helps.

  See you soon!

• In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet radio" function can be used on my iphone5? And if so, how can I make it work?

  In my laptop, when I open the itunes window there is an option 'Internet Radio' to listen to the different type of music. This "Internet Radio" function can be used on my iphone 5? And if so, how can I make it work?

  No more. It merged with the Apple's music.

• function of viscanf() using the question

  I write a function (not a primary function) I want to create this function as a document dll, when teststand use dll and run it.

  the question is that I want to use this result to get the instrument function, but I do not confirm viscanf's right?

  ViStatus _VI_FUNC Get_Frequency (ViSession instrSession, ViPReal64 frequency, ViString freqCommand)
  {
  ViStatus status = VI_SUCCESS;

  Bruno buf [BUFFER_SIZE];
  ViInt32 retCnt;

  If (Status = viPrintf (instrSession, "freqComamnd\n")<>
  Return MT8820B_status;
  If (Status = viPrintf(instrSession,"*OPC?\n")<>
  Return MT8820B_status;
  If (viScanf = (instrSession, "% f", & frequency))<>
  return the situation

  Return MT8820B_status;

  }

  I use viscanf() like that, right? Thank you

  You must use a pointer to ViReal64 inside your Get_Frequency () function to make use as output parameter.   When you call Get_Frequency(), you can use the & operator there often being a ViReal64 (not a ViInt32):

  Get_Frequency (instrSession, & frequency, freqCommand)

• How do I step manually in code that uses a structure of the event, when I want to select a particular event?

  I use an architecture of producer/consumer for an application with a structure of the event in the upper loop. Events are triggered by the user from the control panel using Boolean switches that are "change when you press on" and "release switch. My question is how can I manually step through the code using various events? It doesn't matter what I'm still not in the same event.

  Thank you.

  You can view the code? Is what event still enter? I did have problems step by step in code that uses a structure of the event. You must be patient, but because the application is slowed down a bit and it can take a while to get into the case of the specific event depending on what events you deal. Usually, I place a breakpoint in the case I am interested and run the application as usual. Once I hit the breakpoint is when I turn on highlighting of execution.

• Using Windows Movie Maker on the error message XP__ not indexed _ bad quality

  I use Windows Movie Maker XP (version 2.1?).  I've converted and imported a lot of videos.  I have a group of short videos recorded the same day.  I (with free STROKE) converted to AVI and they play with no audio and several play accelerated.  I've then diverted to ASF and some of them imported correctly.  Most of them gave me an error message that they were not indexed.  I downloaded several things to remedy this from online forums: I uninstalled K-Lite pack codec, Expression Encoder 4, WinDVR AVI, DivFix, lame and a number of things.  That's a family movie, I spent a lot of time on it.  If anyone can help with my old hardware and software configuration at this point I'd appreciate it.  The original film seems to be of much better quality than what I am able to import.  Thank you!

  The most reliable video format for Movie Maker is. WMV.

  No guarantee... but the following freeware converter
  may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  Good luck...

• My laptop stopped recognizing wireless function. What drop-down list function should I use to get it to recognize wireless again?

  My laptop stopped recognizing wireless function.  What drop-down list function should I use to get it to recognize wireless again?

  Hello

  What is the brand and model of your laptop?

  Follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  Enable or disable a network adapter

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-or-disable-a-network-adapter

  Method 2

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  Hello

  1. What is the format of the video file that you use in Movie Maker?

  2. do you receive error messages when you try to play the video?

  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker.

  You can use your favorite search engine and download third-party video editing software to convert the file.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also consult the following articles:

  Problems with importing files into Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Hope this information is useful.

• I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista...

  I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista. I was able to burn the WMV to a DVD file but I'm not able to watch on my DVD player.  It plays ok on my computer.  How can I burn a file to a DVD and be able to continue to watch on my DVD player?

  If you're running Vista Home Premium or Ultimate
  You can try using Windows DVD Maker.

  Windows Vista - disk to burn a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - demo: disk make a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-make-a-DVD-video-disc

  If you don't have a DVD Maker, you will need DVD
  Creation software. The following freeware peuvent
  be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• I'm unable to use windows movie maker to edit my clips.

  I want to use windows movie maker to quicktime footage.
  How can I change the clips to make them open with windows movie maker?
  How can I change a whole?

  I want to use windows movie maker to quicktime footage.
  How can I change the clips to make them open with windows movie maker?
  How can I change a whole?

  ==============================
  The following freeware program to convert
  your .mov to .wmv format files.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your clips on the main screen .mov...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Media player in vista 64-bit won't open after that I used Sothink Movie DVD maker WHY?

  I use Sothink Movie DVD maker to burn movies that I downloaded from various sites, mainly from Youtube Christian sites.  When I burn dvd Windows media Player 11 does not open and I have to download whole using the Microsoft Fix it Center.  I do not understand what is the problem?

  Hello

  • What were the changes made before the issue occur?
  • What happens when you try to open Windows media player 11?
  • You receive an error message?
   
  To resolve this problem, reregister the Jscript.dll and Vbscript.dll files. To do this, follow these steps:
  1. click on Start, click run, type regsvr32 jscript.dll, and then click OK.
  2. click on Start, click run, type regsvr32 vbscript.dll, and then click OK.
  See also:
  http://support.Microsoft.com/kb/925704