Function Ms - Invalid back

Similar Questions

• recursive functions get invalid state

  I'm trying to compile these functions but they called each other, they are passed to a function in SQL Server that I am about to oracle, error message that shows me is if I appreciate all the help I can hurt

  • Error (18,15): PL/SQL: ORA-06575: package or the UFN_CHECKOUTOFSTOCK function is in an invalid state
  • Error (43.25): PLS-00905: NOP oppose. UFN_ASPX_CHECKOUTOFSTOCKOFGROU is not valid

  create or replace 
  FUNCTION ufn_CheckOutOfStock
  (
    v_ItemID IN NUMBER,
    v_StoreID IN NUMBER,
    v_PortalID IN NUMBER
  )
  RETURN NUMBER
  AS
     v_IsOutOfStock NUMBER(1,0);
     v_IsUsedStoreSetting NUMBER(1,0);
     v_Quantity NUMBER(10,0);
     v_OutOfStockQuantity NUMBER(10,0);
     v_ItemTypeID NUMBER(10,0);
  
  
  BEGIN
     v_IsOutOfStock := 0 ;
     SELECT I.IsUsedStoreSetting ,
            (NVL(i.Quantity, 0) - NVL(SUM(ci.Quantity), 0)) ,
            NVL(I.OutOfStockQuantity, 0) ,
            i.ItemTypeID 
  
  
       INTO v_IsUsedStoreSetting,
            v_Quantity,
            v_OutOfStockQuantity,
            v_ItemTypeID
       FROM Aspx_Items i
              LEFT JOIN Aspx_cartItems ci
               ON i.itemId = ci.ItemId
              AND ci.IsActive = 1
              AND ci.IsDeleted = 0
              LEFT JOIN Aspx_cart c
               ON c.CartID = ci.CartID
       WHERE i.ItemID = v_ItemID
               AND i.StoreID = v_StoreID
               AND i.PortalID = v_PortalID
               AND ItemTypeID NOT IN ( 2,3 )
  
  
       GROUP BY i.Quantity,I.IsUsedStoreSetting,I.OutOfStockQuantity,i.ItemTypeID;
     IF ( v_ItemTypeID = 5 ) THEN
     
     BEGIN
        v_IsOutOfStock := ufn_Aspx_CheckOutOfStockOfGrou(v_ItemID, v_StoreID, v_PortalID) ;
        --v_IsOutOfStock := 0;
     END;
     ELSE
     
     BEGIN
        IF ( v_IsUsedStoreSetting = 1 ) THEN
           SELECT CAST(SettingValue AS NUMBER(10,0)) 
  
  
             INTO v_OutOfStockQuantity
             FROM Aspx_StoreSettings 
             WHERE SettingKey = 'OutOfStockQuantity'
                     AND StoreID = v_StoreID
                     AND PortalID = v_PortalID;
        END IF;
        IF ( v_Quantity <= v_OutOfStockQuantity
          OR v_Quantity <= 0 ) THEN
           v_IsOutOfStock := 1 ;
        END IF;
     END;
     END IF;
     RETURN v_IsOutOfStock;
  END;
  

  create or replace
  FUNCTION ufn_Aspx_CheckOutOfStockOfGrou
  (
    v_ItemID IN NUMBER,
    v_StoreID IN NUMBER,
    v_PortalID IN NUMBER
  )
  RETURN NUMBER
  AS
     v_OutOfStockCount NUMBER(10,0);
     v_StockCount NUMBER(10,0);
     v_OutOfStock NUMBER(1,0);
  
  
  BEGIN
     v_OutOfStock := 0 ;
     INSERT INTO tt_v_TmpProducts
       ( SELECT ai.AssociatedItemID ,
                ufn_CheckOutOfStock(ai.AssociatedItemID, 1, 1) IsOutOfStock 
         FROM Aspx_AssociatedItems ai
           WHERE ai.ItemID = v_ItemID );
     v_StockCount := SQL%ROWCOUNT ;
     SELECT COUNT(itemID)
  
  
       INTO v_OutOfStockCount
       FROM tt_v_TmpProducts
       WHERE IsOutOfStock = 1;
     IF ( v_StockCount = v_OutOfStockCount ) THEN
        v_OutOfStock := 1 ;
     END IF;
     RETURN v_OutOfStock;
  END;
  

  Kind regards

  Instead of independent functions/procedures, use packaged functions/procedures:

  create or replace function f1 (around p_number) return whole is

  Start

  If p_number<= 1="">

  Return 1;

  on the other

  return p_number * f2 (p_number - 1);

  end if;

  end;

  /

  WARNING: Function created with compilation errors.

  create or replace function f2 (around p_number) return whole is

  Start

  If p_number<= 1="">

  Return 1;

  on the other

  return p_number * f1 (p_number - 1);

  end if;

  end;

  /

  WARNING: Function created with compilation errors.

  create or replace package f as

  function f1 (p_number integer) return integer;

  function f2 (around p_number) return number whole;

  end;

  /

  create or replace package body f as

  function f1 (around p_number) entire back is

  Start

  If p_number<= 1="">

  Return 1;

  on the other

  return p_number * f2 (p_number - 1);

  end if;

  end;

  function f2 (around p_number) entire back is

  Start

  If p_number<= 1="">

  Return 1;

  on the other

  return p_number * f1 (p_number - 1);

  end if;

  end;

  end;

  /

  Select f.f1 (10) double;

  F.F1 (10)

  ----------

  3628800

  Kind regards

  Zlatko

• From a function table: invalid data type error

  Hello
  
  I'm a ORA-00902: invalid data type error when I try to call the function from a select statement below. Here, I am leaving an array from a function.
  

  create or replace package pkg10
  as
  
  type tabletype1 is table of table1%rowtype
  index by binary_integer;
  
  function func1 return tabletype1;
  
  end pkg10;

  create or replace package body pkg10
  as
  
  function func1 return tabletype1 
  is
      v_tab1 tabletype1;
      idx integer;
  begin 
  
      idx := 1;
      
      for i in (select * from table1)
      loop
          v_tab1(idx).name1 := i.name1;
          v_tab1(idx).key := i.key;
          idx := idx+1;
          
      end loop;
  
  return v_tab1; 
  
  end func1; 
  
  end pkg10;

  select * from table(pkg10.func1);

  Please point out to me where I'm wrong.
  
  Thank you

  Sathya Vamsi says:
  Hello

  I'm a ORA-00902: invalid data type error when I try to call the function from a select statement below. Here, I am leaving an array from a function.

  create or replace package pkg10
  as
  
  type tabletype1 is table of table1%rowtype
  index by binary_integer;
  
  function func1 return tabletype1;
  
  end pkg10;
  

  create or replace package body pkg10
  as
  
  function func1 return tabletype1
  is
  v_tab1 tabletype1;
  idx integer;
  begin 
  
  idx := 1;
  
  for i in (select * from table1)
  loop
  v_tab1(idx).name1 := i.name1;
  v_tab1(idx).key := i.key;
  idx := idx+1;
  
  end loop;
  
  return v_tab1; 
  
  end func1; 
  
  end pkg10;
  

  select * from table(pkg10.func1);
  

  Please point out to me where I'm wrong.

  Thank you

  you try to use a data type of PL/SQL as part of an SQL statement. is NOT authorized.

• When I changed my printer Photosmart of HP 2610 from XP to W7 function 'inverse' is back.

  It prints normally 3,2,1 instead of 1,2,3, and reverse is exactly the opposite.  Is it possible to change this?  I have the latest version of the driver.

  Hello

  Enter the control panel > devices and printers.

  Right click on the printer icon, and then click Printing Preferences.

  On the Advanced tab, set the order of the pages as ' back to Front' and click Ok.

  Then it will print on the first page.

• MAF: REMOTE URL function with the "BACK" button?

  Hello Oracle Community:

  I create the mobile functionality with ability to feature remote "URL".  How can I find my App after loading a remote URL feature?  It seems that transfers control outside of the mobile app and I can't get into my application.

  Please notify.

  TreeStrepek

  The remote URL feature of the MAF is designed so that if you open a remote URL to the MAF that is not in the whitelist of your application, the site opens in the browser of the device (iOS, Chrome).  If the URL is added to the white list, then an online browser opens the page * in * MAF.

  What you describe, it seems that you touch the first case, when you say "It seems that this transfers control outside of the mobile app and I can't get into my application."  By default, the URL that you set in a remote URL is automatically added to the whitelist, but if the user then visits a URL from the URL to a distance which is not in the whitelist, then the page will open in the browser on the device.

  Also, when you set a remote URL, note on the MAF-"Happy" feature.xml page there is a box titled 'show the Browser Navigation buttons'.

  CM.

• Add the function to return back to PL/SQL button

  Hello
  
  I implement a POS interface in oracle forms 6i and I am confused on how to create the function of BACKSPACE button pl/sql. I've added to the trigger WHEN the BUTTON PRESSED:
  
  SELECT substr (: system.current_item, 1, (LENGTH(:system.current_item) - 1))
  IN lv_return
  DOUBLE;
  
  The problem is that I failed to get a dynamic reference to my currently (selected) item on the duration. Is that I get as a value, not a reference, where I can assign the value of lv_return from above.
  Any suggestions?
  
  Thank you.

  DECLARE
    vcValue VARCHAR2(2000):=substr(NAME_IN(:system.trigger_item), 1, LENGTH(NAME_IN(:system.trigger_item)) - 1);
  BEGIN
    COPY(vcValue, :SYSTEM.TRIGGER_ITEM);
  END;
  

• How can I call a js function when my backing bean method has completed

  I use JEV11G.here is the code:
  < af:panelCollection id = "pc1" >
  < f: facet = 'menus' name / >
  < f: facet name = "toolbar" >
  < af:toolbar id = "t1" >
  < af:inputText id = "it1.
  value="#{pageFlowScope.favoriteTreeMB.searchCriterium}"/ >
  < af:commandButton text = 'Go' id = "cb1".
  actionListener="#{pageFlowScope.favoriteTreeMB.searchTree}"/ >
  < af:commandButton text = "Reset" id = "cb2".
  actionListener="#{pageFlowScope.favoriteTreeMB.resetTree}"/ >
  < / af:toolbar >
  < / f: facet >
  < name f: facet = 'bar of Θtat' / >
  < af:tree value = "#{pageFlowScope.favoriteTreeMB.tree}" var = 'node' "
  rowSelection = 'single' id = 'pt_t23 '.
  Binding = "#{pageFlowScope.favoriteTreeMB.favTree} '"
  partialTriggers =": cb1: cb2" > "
  
  < f: facet name = "nodeStamp" >
  < af:outputText value = "#{node.attributes ['Filename']}" "
  rendered = "#{node.rendered}" / >
  < / f: facet >
  < / af:tree >
  < / af:panelCollection >
  < / f: facet >
  
  The tree is refreshed, I just when pageFlowScope.favoriteTreeMB.searchTree is made or a js method will call.

  The doc:

  void addScript (javax.faces.context.FacesContext context, java.lang.String script)

  Adds a script to run during rendering. >

  So you can put the code somewhere and just call it.

  Timo

• Error: Function of ms - dos invalid when copying on external drive with Windows 7

  FUNCTION OF MS BACK INVALID WHEN PLAYBACK EXTERNAL DRIVE WITH WIN 7

  Hello

  1. you try to save a data of the C drive on an external hard drive using the Windows backup feature?

  2 does this problem occur when you try to copy / paste normally?
  3. What is the accurate and complete error message?

  If you try to copy and paste the data manually, then try the fix to resolve the problem:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• Need some tips to merge the two table-manipulation functions

  Hi guys!

  Thanks to Johnsold, Helmut O'Brian and Jcarmody, who helped me through a string function complicated (for me, the noob of LV), I got away with my project and I'm very close to its end.

  As I've described it here I wanted to explore an array of words combined with-, i.e. C1 - C10. Help, when I arrived, I was able to do. I also learned a few things and was able to do the following:

  Original array: new table:

  R1                                                       R1

  R2                                                       R2

  C1-C3                                                  C1

  K1                                                       C2

  C3

  K1

  I have this:

  Original array: new table:

  R1                                                       R1

  R2,R4,R7                                             R2

  C1                                                       R4

  K1                                                       R7

  C1

  K1

  I was also able to combine these two functions

  Now, back to my problem.

  Until now, it was just a 1 d array that I worked with. In fact, it's a 2D array, I read a. CSV file:

  

  As you can see there are a few places where things is combined with either - or by commas. I need to widen the first column as described above and as resolved in the thread I mentioned. Fact! No problem. I extracted the first column in table 1 d. Then expand it. Now, I need to replace in the original array and also expand all.

  It should then look like this:

  

  Then I only need to copy the position of the R6 line and paste it in the empty fields:

  

  I enclose below two screws. Start by opening the main.vi. Then copy.vi. I tried to describe the problem here too. You can see what I've accomplished and what is missing.

  Tasks:

  1. replace the column expanded in the original array and expand all.

  2 copy the needed lines.

  In the main.vi, I do the 1 d expansion, but I have the problem with the expansion of table 2D. In copy.vi, I managed to copy the lines. If this part is done.

  Basically, I need some advice on enlargement that I do and how do I get the 2D table also expanded. Because I have not much experience, I feel more comfortable working with 1 d arrays. But I can't seem to get any further with this 1 d-> expansion 2D.

  I also really can't seem to find a smart way to implement my function of copy-line-in the main.vi.

  P.S the joint screws are manufactured in LV2010.

  Fortunately, I can attend some courses of basic home OR here in Norway, but so far, I'm still learning and I think that sometimes, I try to do things that are way out of my League

  I don't know what I did but it works now

  Thanks for the help, same!

  You are even welcome!

  

  Have attached the file if anyone wants to see what I did.

• not a function valid file Toolbox labwindows7.1

  Hello

  I have a problem on labwindows 7.1.

  When I run the labwindows 7.1 software, I get this failure:

  not a file function group invalid

  c:/... Toolbox.h

  How can I fix it please?

  Thank you!!

  Adeline

  You probably have this file specified as an additional library. Select library > customize and see if this file is located in the libraries of the user list. Only .fp and .lfp files should be in this list. You must click the button modify and replace toolbox.h by toolbox.fp.

  Luis

• app Webwork hardware back button

  Hello, I saw a post about it, but none of them have solved my problem. I m not able to intercept the event of the "back button" on my webworks app. My application closes just on the back key. The problem occurs only in the real device, with the Chrome its not quite the same market plugin code.

  Edit: I have a 9300 BB os6 and another with the os5 does not work on both.

  My config.xml file

  
  http://www.w3.org/ns/widgets"
          xmlns:rim="http://www.blackberry.com/ns/widgets"
          version="2.0"
      rim:header="RIM-Widget: rim/widget">
    http://www.example.com/"
            rim:copyright="Copyright 1998-2012 My Corp">My Corp
    FIDS_V3
    
    
    
  
  
  
  
  
  
  TCP_WIFI
  TCP_CELLULAR
  BIS-B
  MDS
  WAP2
  WAP
  
  
    
    
    
    
    
    
    
    
    
    
  
  

  and javascript used in index.html code

  Thank you for responding.

  The problem is that I was not including this page (index.html) in the package webworks. The web is a Web server and I put in the config.xml file of content pointing to this Web server. Is this a bad practice? The problem of adding the web project to the package is that to make changes, you need to do a full update of the application instead of change just the server.

  Apart from that, now my problem is that with

  blackberry.system.event.onHardwareKey(blackberry.system.event.KEY_BACK,function handleBack(){history.back();return false;});
  

  When I press return on the first page the app does not close because I expected to do. Is it possible to pose as

  if (history.canGoBack()){
     history.back()
  }else{
     exit();
  }
  

  How is this controlled BB?

• Function Index problem.

  Hello

  I have a problem regarding a function function index.

  example:

  TableName: Test

  Column: A, B, C, D

  I create the index on the table, column, a test using a user-defined function.

  If I do a select on the column, he'll be fine. In other words, I'll get the results you want.

  However, if I insert in the table and validation, and I do a query using the 'A' column in the where clause. I don't have any query hits. Its really weird.

  Have you ever experienced this problem? and is there an index of function according to back and donts w.r.t.?

  Thank you.

  MichaelR

  If you use a deterministic function really, it works:

  create or replace function test_fn (p_number number) return number deterministic
  is
    vreturn number := 0;
  begin
    if p_number = 1 then vreturn := 55; end if;
    if p_number = 2 then vreturn := 89; end if;
    return vreturn;
  end;
  

  Or, if you reverse the order of your second inserts (insert the folder before the recording of test1 test2) - it works fine.

  The reason why you get no results is when you insert the file test1 with a = 2, Oracle executes the function and gets no data, so it assumes that the result is NULL and puts in the index. You said Oracle function is deterministic, so he starts from the principle that any time test_fn (2) is called, it retrieves a null response.

• DRM function to replace the comma in a string

  Hello

  I'm new to the DRM. I have a requirement to replace insérent in a string with the semicolon (-). Is it all built in function to achieve.

  For example -.

  input string is s1, s2, s3

  Output string should be s1, s2, s3.

  I tried to use the ReplaceStr function. This works well for replacing any other, but for the comma, it does not work.

  Appreciate your help.

  It works for me with the formula below to do a global search of replacement that uses properties to store the string the comma (s) must withdraw and a global property to contain the decimal point itself:

  ReplaceStr (PropValue (Custom.String), (Custom.Comma) PropValue,, T)

  You've been do not add commas directly in the formula contained in the definition of the property you have? That would by way too many parameters in the function when the formula is analyzed for you would end up with something like ' DRM-25620: number of parameters for the function "ReplaceStr" invalid. " 4 expected, found 5. »

  Concerning

  Craig

• How to create a sentry function

  
  Hi all

  I want to build a custom authentication scheme that combines a custom authentication and SSO functionality.

  1. If the REMOTE_USER Variable HTTP header is set, this user must be a valid user. (Single Sign On feature)

  2. If the HTTP header Variable is not set, the LOGIN Page should appear. (local user Administration)

  3. the combination user/passowrd of the login page must be validated by my own authentication

  I think I need to create a sentry function, which is a combination of the Sentinel-functions that are used in the projects 'tailor-made' and 'HTTP header Variable.

  I tried to find an implementation of these functions in the diagram APEX_040200 database, but without success.

  @APEX-team: can you provide the implementation of these functions-Sentinel or at least documentation.

  @all: is there anyone who have implemented a similar authentication model.

  Thank you

  Richard

  Hi Richard,

  a sentry function sets whether the application should be allowed to deal with, because the session is ok. Since the 4.1, we have a function additional Invalid session which runs if the Sentinel returns false, before redirecting to the login page. A callback function can be used to continue the treatment when the login page is external. It runs when the external login is successful and redirects to the APEX. Authentication is used in combination with internal login pages to verify that the credentials of the user (username / password) are ok. If it returns true, the session is updated with the username. Otherwise, the login page must present again, with an error message. The poster disconnection feature runs after the user has disconnected. It is sometimes useful for the cleaning of data for the session or twist the redirection.

  In your case, the sentry function is probably not necessary. By default already checks if corresponding to the session id and session cookies, this should be enough. If you try to implement single sign-out, a sentry could check if the session is already authenticated, but the REMOTE_USER will be void. Invalid session function is called when the Sentinel (you're a custom or default) fails. If REMOTE_USER is not null, it can simply call APEX_AUTHENTICATION. POST_LOGIN to save the value of the header under the username, instead of making the normal redirection to the login page. It authenticates the user without checking with authentication credentials. The callback function is not necessary in your case. The authentication function is called when the user connects using the login page for the application (101). It can check the name of user and password for cases where $remote_user@-part is null.

  This can be implemented either as a plugin for authentication with the custom authentication scheme. The former is to be preferred to the production code, the latter is sometimes useful for prototyping. The texts point help plugin and authentication for the various functions include example code. If they are not enough, just respond here and I will try to come up with more concrete examples.

  Kind regards
  Christian

• Problem with function ArrayItem in DRM

  Hello
  
  I have a list of values separated by a comma. I'm trying to get the first value in the list by using the function "ArrayItem.
  
  But when I give the delimiter as "," is considered a parameter and gives an error like *'DRM-25620: number of parameters for the function 'ArrayItem' invalid. 3 EXPECTED, found 4' *. But here, is actually a delimiter in my initial list of values.
  
  I tried to use, such as ',' and ',' but of no use... each form is treated as parameter and giving same error.
  
  Can you please let me know how we can specify the delimiter in the service.
  
  I hv same tried to use the ReplaceStr function to replace with another character in my watchlist, but there also, is considered as separator parameter in the function.
  
  Thanks in advance

  Hello

  On your delimiter, put the comma of Word inside the brackets []. It should look like this: [decimal]. It will take a comma as separator.