not a function valid file Toolbox labwindows7.1

Similar Questions

• PSE9 not fully functional without "file-change-etc.

  I can not get the line file-change-etc. appear in my PSE9 (on disk), then backup cannot and may not transfer to my new laptop, where the line appeared very well! (and now I understand why the help sections would have been absurd before)

  You should maybe click on the double arrow pointing to the right, or adjust your display settings.

  http://helpx.Adobe.com/Photoshop-elements/KB/menus-missing-elements-8-9.html

• Cannot open a .ppsm file, gets the error "... not a win32 valid file."

  Received an attachment (pictures) and saved to file.  It has a reference to "type compatible Microsoft Office Powerpoint 2007 Macros Show (.ppsm) - when I try to open it in one of my programs, it is said EARTH.ppsm (file name) is not a valid WIN32 application, the problem with the sender?" or else, what can I do to open this file please.

  Original title: opening an attachment (.ppsm)

  Hello

  The error message you get usually suggests that there is a problem with the file that is open. In order to confirm this in your computer, you can try to open a file different .ppsm and see if it works properly. If so, you must ask once more this file to the sender.

  You can also try to open this file in another computer that has the necessary programs (Microsoft Powerpoint 2007) to open it with. You can post back the results so that we can help you further.

  I hope this helps.

• input file, not an archive valid

  Hello

  Initially, the application was written in CVI 6.0. Now, I created a new project and workspace and adds all the files.

  The build works very well. But I get when a link (build) is the error message "error: input file is not an archive valid: 'c:\Projects\...\bin\i7000.lib'". ""

  With another library, I get the same problem: "uart.lib."

  The other just lib files work fine.

  I saw in an old post a solution: just to recreate the project I did. But it did not work in my case.

  Any help?

  At soon Andreas

  Hi Andreas,

  I tried to build a simple project by calling a function of each of the libraries that you provided:

  Get_Uart_Version();
  FloatToHex (12.34);

  The project has been successfully building, there was no mistake in the linker. I tried with CVI 2013 and CVI 2013 SP2.

  You can try and see if such a simple project always gives the same error of link for you?

  If not, it is possible that the problem is not only a question of format library. You would have to try and simplify the project until you find the portion of code that triggers the error from the linker. As an alternative, you can send us your project and we can try to isolate the problem.

  Best regards
  ALPAR

• GoldenGate - OGG-00146 - 600 error - [< file Logbackup >] is not an archive valid

  Hi all

  I'm replicating data between two SQL servers.

  SQL Server - 2008 R2 SP3 version

  This morning, I found a few excerpts from my ABENDED State with the error message following

  Function ERROR OGG - 00146 VAM VAMRead returned unexpected result: error 600 - VAM customer report < [CArchiveLayout::BuildLayout] [<LogBackupFile >] is not an archive valid. >.

  The report of customer INFORMATION OGG-00178 VAM < last LSN read: 000fa2e5:00000010:0001

  No open transactions >.

  Report Client INFORMATION OGG - 00178 VAM < sanity checking is not enabled.

  I validate the backup and is good. In addition, the permissions on the backup files are good.

  What has not worked for me -

  1. alteration retrieves the next log backup time (to blow the log file, he complains). Tried with several times but nothing fruitful. Whenever he complained that the log backup that is reading is not an archive valid.

  2. alteration from start now. Extract attempted to read the latest logbackup and failure with the same question.

  It actually worked-

  Recreated the extract and used start now. Surprisingly, it worked.

  Please help me with following Qs-

  1. I can't stick to the autour work that I implemented. Fortunately, he came on stage at the moment. I don't want to use start now if I came across the same issue in production. Please let me know how to solve this problem.

  2 correct me if I'm wrong - the whole time, I think, when I edit the extract to start now, it is supposed to read what is in the active log instead of the log backup. It didn't happen when I modify the existing clip. But it happened when I recreated the extract. Any thoughts?

  Kind regards

  Rakesh

  As your extract is able to start now, to start after the recess, it is perhaps a problem with the checkpoint file. If the checkpoint file is corrupted, then none of the alter commands are effective and you must re-create the checkpoint files by recreating the extract it self.

  If the problem persists try copy command of showch of information outputs and recreate the extract and change control with option of lsn points. The root, you will have to study why the checkpoint file is getting damaged (problems with discs)

• ORA-12012: error on auto work 2160514 and ORA-06576: not a function name or a valid procedure

  I get these errors after updating, could you please review and advise.

  Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j000_8224.trc file:

  ORA-12012: error on auto work 2160513

  ORA-06576: not a function or a procedure valid name

  Sun 23 Jun 19:02:55 CDT 2013

  Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:

  ORA-12012: error on auto work 2160514

  ORA-06576: not a function or a procedure valid name

  Sun 23 Jun 19:03:53 CDT 2013

  Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:

  ORA-12012: error on auto work 2160514

  ORA-06576: not a function or a procedure valid name

  Sun 23 Jun 19:03:53 CDT 2013

  Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:

  ORA-12012: error on auto work 2160513

  ORA-06576: not a function or a procedure valid name

  Sun 23 Jun 19:04:53 CDT 2013

  Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:

  ORA-12012: error on auto work 2160514

  ORA-06576: not a function or a procedure valid name

  Sun 23 Jun 19:04:53 CDT 2013

  Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:

  ORA-12012: error on auto work 2160513

  ORA-06576: not a function or a procedure valid name

  Checked the DB links are working properly

  DB DB link: where I get these errors

  SQL > select count (*) from [email protected] ;

  COUNT (*)

  ----------

  61233

  the ERP DB

  APPS-VAL1 > select count (*) from [email protected] ;

  COUNT (*)

  ----------

  439

  If I try to run it manually, I am getting error below.

  DBMS_SCHEDULER BEGIN. RUN_JOB ("SCHEDULE_REQUEST_DEQUEUE", TRUE); END;

  *

  ERROR on line 1:

  "ORA-27475: ' XXSAP. SCHEDULE_REQUEST_DEQUEUE' must be work

  ORA-06512: at "SYS." DBMS_ISCHED", line 150

  ORA-06512: at "SYS." DBMS_SCHEDULER', line 441

  ORA-06512: at line 1

  SQL > SELECT master, job_name, error # FROM dba_scheduler_job_run_details

  WHERE error # LIKE '% 6576% ';  2

  OWNER

  ------------------------------

  JOB_NAME

  --------------------------------------------------------------------------------

  ERROR #.

  ----------

  SYS

  SCHEDULING_LOCATION_UPDATE

  6576

  SYS

  SCHEDULE_REQUEST_DEQUEUE

  6576

  OWNER

  ------------------------------

  JOB_NAME

  --------------------------------------------------------------------------------

  ERROR #.

  ----------

  SYS

  SCHEDULE_REQUEST_DEQUEUE

  6576

  SQL > select job, what from dba_jobs where broken = 'Y' or chess > 0;

  no selected line

  LOG_DATE                                                                    STATUS                         JOB_NAME

  --------------------------------------------------------------------------- ------------------------------ ----------------------------------------

  23 JUNE 13 11.37.53.128960 AM - 07:00 IS NOT SCHEDULING_NOTIFICATION_UPDATE

  23 JUNE 13 11.37.54.619584 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.38.53.728264 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.39.53.830833 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.40.53.929791 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.41.54.047578 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.42.53.273320 AM - 07:00 IS NOT SCHEDULING_NOTIFICATION_UPDATE

  23 JUNE 13 11.43.53.529692 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.44.53.628774 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.45.53.739038 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.46.53.848009 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  LOG_DATE                                                                    STATUS                         JOB_NAME

  --------------------------------------------------------------------------- ------------------------------ ----------------------------------------

  23 JUNE 13 11.47.57.220078 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  23 JUNE 13 11.48.53.329549 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE

  3324 selected lines.

  SQL > 1

  1 * Select log_date, status, JOB_NAME from dba_scheduler_job_run_details where status = 'in FAILURE. "

  Thank you

  Vincent

  I suggest you to move (i.e. rebuild) jobs in the XXSAP scheme rather than use the SYS schema.  In this way, you can run "BEGIN DBMS_SCHEDULER. RUN_JOB' to XXSAP correctly.

  Hemant K Collette

• LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW

  Hello.

  I used labview to make an assignment of the University. As part of the im supposed to transfer the .vi file to my teacher, but all .vi files sent using the e-mail system are corrupt. When I try to open mine it gives this error

  LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW

  Unfortunately, I also lost my backup as I was working on a lab computer and didn't upload my files on the storage server.

  So I was wondering if someone can help out me. Thank you very much.

  The problem is that the email system dealt with the file as a text file. All thesequences have been replaced as . You can see this opening of VI in a hexeditor. Each VI begins with "RSRC".". Your VI begins with "RSRC.

  I replaced the two occurrences of "RSRC"with "RSRC"."and he opened in LV 8.6. Missing just a few controls and subVIs.

  I did this on Windows.

• Message update\update.exe is not a valid file because the computer has been infected from malware attacks

  Original title: update\update.exe message is not a valid file when tried to install IE8 KB2744842 patch

  I got this virus live Platinum security.  I think about Microsoft bulletin as CVE - 2012 - 4969 Backdoor: Win 32/Poison.BR supposedly he is gone now with PC Tools Spyware Doctor with antivirus.  I can no longer get critical updates to www.update.microsoft.com and cannot go there and get either them.  I have automatic updates turn on my computer, but when I go to the update site, it asks me to turn on the automatic updates, but doesn't change from red to green.  If I click on the express, it gives me a message there is a problem with the web page.  I have read some solutions and typed in will looking for three files like BIT and update, but the only one listed was the workstation.  I did some research and found the servers to Windows IE8 patch KB2744842 and downloaded and when I tried to install it, he unpacked himself and then ran, and then I got the message saying that update\update is not a valid Win 32 application.  I searched this file and found it was created on 20/09/2012, the same day I had the terrible malware and under properties, it is called configuration of Windows Service Pack, the version of the 6.3.0004.1 built by: dnsrv, internal name update.exe, English, original name: update.exe on my computer, it is C:\\bb5d6cfc84bf6a13dde9b006.update

  Try to solve this problem cost me $230 plus the cost of PCTools Spyware.  I called a number to the www.spywarehelpcenter.com to support when I was having trouble installing the PCTools in safemode and said Malwarebytes Pro was much better and used by companies and he said he gave me $150 off so it cost me one once charge $50 and there is no renewal and sold me a one year $ 180 contract to remove the virus and the development of my computer.  He had insisted on it going remotely and showed me all these errors.   I think that I made a mistake to trust him.  Two technicians have worked on my computer remotely on two different days without a firewall and installed Malwarebytes Pro three times because it kept to give a message of corruption, and it is that when I pointed out to them there is no firewall that was added by a sort of sharedaccess.reg problem is I can't get and install the critical updates.  I trust a third time to do things?  They have deleted quite a few programs.  I think that maybe the problem is that they were not aware of the fixit patch and the full patch to IE8.  I run Windows XP Professional and probably should upgrade to Windows 7 in the near future.

  I should add that a few days before that happened, I noticed that if I went in sysedit, the config.sys and autoexec.bat files windows were empty.   My computer has always competed, but it seemed very slowly.  I could not find a solution for this and read that you don't really need these files.  I have the original operating system disk and has been reading how to install it, but only for the repair by pressing 'r' and let it repair missing files.   So I don't know what to do.  Any advice?  I am so tired of this, but still have hope to operate correctly.

  Hi Catnip009,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to download and make a bootable CD or USB to Windows Defender in offline mode, and then run the tool.

  For more information, see the following articles:

  What is Windows Defender in offline mode?

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

   

  Windows Defender Offline: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ

  Method 2: If you still experience the problem, and then run Microsoft Fixit, that might help us diagnose the problem better.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Let us know if that helps.

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• I've got qcad Professional installed but vista will not open save dxf files. I get dxf is not an application valid win 32. Is there any solution for this?

  I've got qcad Professional installed, but vista will not open save dxf files I get a file... dxf is not an application valid win 32.
  Is this a common problem?
  Is there any solution for this?

  You, of course, took umbrage to my last post. For that I apologize, there was no pejorative intention. I am a newbie in the forums and am digging my way along. I have marked your answers answers by mistake, I'll try to fix this.
  I solved the problem, I tried to open files in the Qcad application by clicking on the list of recently used files. It will not work in a new session.
  The correct procedure is:-
  Open click, Qcad - click file - open (this opens the index page of Qcad from the saved files) - click the required file - click Open.
  There is no problem, with the exception of this incompetence of users.
  Thank you for your time and assistance.

• Whenever Adobe reader tries to update it is said that the documents is not a valid file name and he ceases to make the update

  Original title: update problems, installation, uninstall, even adobe reader...

  Whenever trying to update my adobe reader it says that documents is not a valid file name and he continues to do the update and says update failed. I can not uninstall. What is happening and how to fix it?

  Hi SMHaney,

  1. What is the full error message you get?

  You can read the following article and try the steps and check:

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  You can also check out the following link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-1325-documents-is-not-a-valid-short-file/2d9db4a9-25F3-4563-BDDA-ef71e31f7573

  Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  You can also try to create a new user account and check.

  Create a user account

  Hope this information is useful.

• The term 'Select-Object-property' is not recognized as a cmdlet, function, script file or executable program. Check the spelling of the name, or if a path has been included, make sure the path is correct, and then try again.

  I have a fairly new version of PowerCLI (5,5 Rel 1) 5.5 being ESXi and vCenter.

  I also checked that automation. Core is installed:

  PowerCLI C:\Windows\system32 > Get-PSSnapin VMware.VimAutomation.Core

  Name: VMware.VimAutomation.Core

  PSVersion: 2.0

  Description: This Windows PowerShell snap-in contains the Windows PowerShell cmdlet

  TS of vSphere management.

  but after connecting to vCenter, I get error trying to run:

  PowerCLI C:\Windows\system32 > $Results = ForEach ($DRSRule to $DRSRules)

  > > {}

  > > «|» Select-Object-Property @{N = 'Cluster'; E = {(Id-vue-Get $DRSRule.Clust)}

  amplifier. {{ID). name}}.

  > > @{N = "Name"; {E = {$DRSRule.Name}}.

  > > @{N = "enabled"; {E = {$DRSRule.Enabled}}.

  > > @{N = 'Type of DRS'; {E = {$DRSRule.KeepTogether}}.

  > > @{N = "MV"; E = {$VMIds = $DRSRule.VMIds - split ","}

  > > $VMs = ForEach ($VMId to $VMIds)

  > > {}

  > > (Get-View-Id $VMId). Name

  {> >}

  {{> > $VMs - join ","}}

  {> >}

  > >

  The term 'Select-Object-property' is not recognized as a cmdlet, fu

  function, script file or executable program. Check the spelling of the name, or if

  a path was included, make sure the path is correct and try again.

  On line: 3 char: 32

  +     "" | Select-Object-Property < < < < @{N = 'Cluster'; E = {(Get-view-Id $DRSRule

  . {{Cluster.Id). name}}.

  + CategoryInfo: ObjectNotFound: (Select-Object-property string :)

  [], CommandNotFoundException

  + FullyQualifiedErrorId: CommandNotFoundException

  PowerCLI C:\Windows\system32 > Add-PSSnapin VMware.VimAutomation.Core

  Is ' Select-Object-Property not installed?  If not, where I get it, please?

  see you soon

  KC

  Note, I received this Dean here code: PowerCLI: extraction rules DRS; Deans blog

  There should be a space between the - Property parameter and Select-Object

• "JavaScript exception: error calling the fuction:TypeError selector: b is not a function.

  I got a page that I built in Muse that worked well, until after I installed the latest update. Now, when I export I get this error:

  "JavaScript exception: error calling the fuction:TypeError selector: b is not a function.

  I have no idea what it means, and I tried to remove all generated files previously.

  My page is more correctly displayed at all.

  This is probably due to the valid custom code in thesection of the Page Properties, or properties of the Site, but it is impossible to say with the URL of the page (so you can see the code of the page).

• apex.jQuery is not a function

  Hello
  
  I was using apex 3.2 with extjs 2.02 and everything worked fine. We have now upgraded Apex to Application Express 4.1.0.00.32 and I get the following error:
  
  apex.jQuery is not a function
  {Apex.jQuery (document) .ready (function () [break On This Error]
  f? p = 10... 25: (line 239)
  apex.jQuery is not defined
  [Break on this error])} return this.pushStack(d,a,e.selector...ex.event.gCancelActions=false})}}; / * !
  apex_4_1.min.js (line 18)
  
  
  I searched the forums without much joy. If this has been previously validated with a solution can someone point me there. Any help will be greatly appreciated.
  
  Thanks in advance.

  Praj,

  Well if it works, then it must be some kind of colission or conflicts with your different javascript libraries that you use. It's almost impossible to debug via the forum. If there is a conflict, you might want to try to reference your custom first, libraries then the apex files as I am pretty sure apex uses jQuery.noConflict)

  Good luck
  Janet Tyson

• Download timer estimate not updated until the file is made of 7/8, size of the file not considered and corrupt downloads!

  Sometimes when I download a file of the estimator download will not update until that file is downloaded about and made. It didn't happen in the previous versions, I think somewhere around v15? or whenever the new download manager has been implemented.

  Another problem is that the size of the file is unknown until mainly downloaded.
  (a.k.a. "calculation of the remaining time - x MB 103 MB (132 KB/s)")
  didn't matter what Internet connection I use, can not repeat on a local network download.
  Sometimes, I don't get on the servers really really really really really fast.

  Oh, and don't forget corrupt downloads!
  file will download as usual, but smaller than the total size who said that the Web site or the list dialog confirmation boxing. Download complete report manager!
  Ending up with a zip file or other file that will not open or run.

  No antivirus software, I run clean, safe and vigilant.

  I managed to get photos, take a look.
  https://www.dropbox.com/sh/gu2yiffrazxpasc/xVaAEH4Kod

  I use an extension to go back the look, feel and function of the old Download Manager, but it still isn't correct in new download manager.

  but as has been said elsewhere, I'm probably going to create a new profile so I hope that this will disappear when I finally get around to that?