Do you know if you can acquire data from a microcontroller that runs under the PLUS + 1 environment, using the NI 9201 platform?

Similar Questions

• How can I find and close programs that run in the background of my computer?

  How can I find and close programs that run in the background of my computer...

  From Internet Explorer

  Original title: battery

  How can I find and close programs that run in the background of my computer...

  From Internet Explorer

  Original title: battery

  The less you have to run all the time, most things you want to run will perform:
  

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• You can restore data from previus windows?

  OK, that's my essue I reinstalled windows vista in my computer when I was doing this he told me that my old files which will be saved in a folder called "Old windows" when the installation is complete I have try to look fo this folder and I couldn't find it. So now I try to find out if I can restore my computer to a time before I did reinstalling windows? and if I can how?

  I never find these files again?

  Help, please.

  Thank you.

  Hello

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not apply we can not help you

  Try the data recovery experts

  but they are very expensive

• You can send a text message without that it alerts the receiving party.

  Hello

  The reason why I ask this question is I work a very broad time, which is very different, so most of the people, as I work for myself and honestly put in a large number of hours. So I'm the biggest part of the day and don't sleep around 4-5 hours per day, if this (but I take care of myself), made in good health, and I talked to a lot of doctors and weight trainers. But my main question is, I have to send a lot of messages to people everywhere in different time zones and sometimes in different countries. So I was wondering if there was a way to send you a text message without it alerts the receiving end, so he does not wake up, just in case they have forgotten to put not to bother, because I feel always horrible when I wake someone to say Estonia at 05:00 when its 22:00 here. And I'm on a lot of people in Estonia to this fact and throughout the EU. I would be very happy to have any kind of response, and if they do not have this feature, it is absolutely something that Apple should install in their section do not disturb, it would be very useful for many people like me who do business around the world and work long hours, because I'm sure they are more of us out there so I know Laughing out loud.
  See you soon,.
  CHS

  No, you can't control how other people chose to be alerted to their messages. This isn't a feature that apple might add that notifications are exclusively under the control of the receiving phone.

• You can see how many times a Mac fell in the OSX system?

  Anyone know if you can see how many times a Mac fell in the OSX system?

  I know that you can see, but I don't know.

  I already checked system information etc.

  Thank you!

  Kind regards

  Rajesh

  If you mean physically not fallen there is no information.

• You can specify a missing template handler who lives under another site?

  I set up a dedicated website, separated from my Web site for my administrator ColdFusion (CFIDE).  So I have my site here: http://www.public-site.com/ and my admin ColdFusion here: http://www.cfadmin-site.com/ .  They both live on the same server, but in different directories.  So now I'm setting up my ColdFusion settings and request if there is a way to configure the missing template manager and the site-wide error handler to use the files that live under the directory public site so that I can give my users a consistent look?

  I'm guessing that's not possible, but thought I would ask.  I can leave on create modules under my ColdFusion admin directory, then using < cflocation > to redirect the user to the environment of the public Web site.  Or incorporating javascript to redirect.  Other thoughts?

  Miguel_ wrote:

  Root ColdFusion web

  D:\wwwroot\cfadmin-site\

  If your ColdFusion server, then YES this is where you put managers wide site.

  I'm not sure about your statement that you must 'redirect to the public site.  As far I know, ColdFusion must display all content at the site of this directory level in the context of the IIS Web site which deals a request for.

  It would take a couple of tries (and if you already have then ok), but my first thought would be we not, you don't need to redirct because you're already there.

• You can search for your personal library with Siri on the Apple TV and if so, how?

  You can search for your personal library with Siri on the Apple TV and if so, how?

  No, and it's a real shame...

• I bought a new comp, I can not access my hotmail account on it, but I can you can reach it from other computers

  Hotmail cannot b viewed, the new computer

  I bought a new comp, I can not access my hotmail account on it, but I can you can reach it from other computers

  Hi GwenBright,

  1. what happens when you try to access the account? You receive messages or error codes?

  2. are you facing problems with hotmail account?

  If you are facing problems with your hotmail account, you can post your request in the Windows Live forum for assistance:

  Windows Live Support

  http://windowslivehelp.com/searchresults.aspx?query=cannot%20access%20account%20from%20New%20computer&ProductID=1

  Hope this information is useful.

• I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.

  I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.
  It is upgraded, the other is an integer telling Windows Vista;
  and the little hard up and down, mouse from left to right,.
  or can you please sent a copy of a disc to my address, this is the right path for fixed my windows vista online.
  (try to contact technical support of the direct Vista operating system)
  How about upgrading to windows 7? Give me the vista on 'the base drive OEM' continues for facilities?
  ----------------

  Replacement OEM or software support of system manufacturer in most cases, you must contact the OEM (OEM) manufacturer or the manufacturer of the system directly to replace Microsoft software that was distributed by your computer. However, an exception is made for operating system service pack media *, for which you can contact us directly.

  • Contact information for the manufacturer of the computer, see the Microsoft Web site at the following address:
    http://support.Microsoft.com/default.aspx?pr=oemphone (http://support.microsoft.com/default.aspx?pr=oemphone)
  • If the product has been distributed by an OEM or a system integrator, the product ID contains the letters "OEM". Visit the Microsoft Web site at the following address, select the appropriate product family, and then follow the steps to find the product ID:
    http://support.Microsoft.com/default.aspx?PR=notsureoem (http://support.microsoft.com/default.aspx?pr=notsureoem)
  • For OEM software, the certificate of authenticity (COA) lists the name of the manufacturer of the computer under the software version name. For more information on the certificate of authenticity, see the Microsoft Web site at the following address:
    http://www.Microsoft.com/resources/howtotell/ww/FAQ.mspx#1 (http://www.microsoft.com/resources/howtotell/ww/faq.mspx#1)

    If you have System Builder software, the COA lists "OEM software" or "OEM product" under the software version name.

  * Note Service pack support only includes what is associated with the service pack itself.

  More information: http://support.microsoft.com/kb/326246

  Regarding Windows 7 - frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

• I receive a hotfix package message could not be opened. check the patch package exists and that you can access it. What does that mean... Why can I not simply remove this program?

  I'm trying to remove the silverlight program in order to reinstall it and watch movies from netflix.  Why is it so difficult?  What should I do?

  Hello

  Uninstall Silverlight by accessing this Web site. Click on uninstall Silverlight and follow the instructions.
  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Then download the latest version and install it on your computer. You can download Silverlight from the same link.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required

  After upgrading Office 2003 to Office 2010, when rebooting, open a window of choce of windows update, if you select do not do updates, wauclt.exe runs and the pigs, cold start pc is required to restart or allow time (about an hour) for wuauclt stop execution and free PC - our aim here is to bundle 2010 via ZEN na enter the beam perfectly - this popup must be eliminated

  Hi Pops1148,

  ·         Is the question not confined with updated Microsoft Office?

  Follow the suggestions below for a possible solution:

  Method 1: You can follow the steps in the article in the Microsoft Knowledge Base and check if it works.

   

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Method 3: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• Can I import data from face recognition that I did it on my MacBook to my new iMAC?

  Can I import data from face recognition that I created on my MacBook to my new iMAC?

  Thank you

  When you migrate your to face Info Photos iPhoto library are also migrated

  LN

• acquire data from the oscilloscope DPO2024

  I am trying to acquire data from the oscilloscope DPO2024 using labview. I am able to do, but my vi file only works for channel 1. Other than channel 1, it does not work and instead, it changes the adjustment of the oscilloscope as well. Find the vi files attached.

  Any help is very appreciated.

  You must connect the channel in the waveform of reading.  It is default to channel 1 if thread continues.

• How to acquire data from the memory of the meter

  I am a beginner of Labview. I don't know how to acquire data from the memory of the meter.

  I read a few examples of data acquisition, but apparently not similar to my case. I can't use DAQ in my computer, because I don't have DAQ card.

  Could someone give me some pointers? Similar examples would be great.