Furniture Popup and ToolTip, positioning of the questions...

Similar Questions

• Photosmart C309a: Printer does not work after uninstalling and reinstalling to resolve the question of the HP Solution Center

  HP Solution Center has stopped working so I followed the advice of HP Support Assistant to uninstall and reinstall the printer.

  Cannot get printer to reinstall successfully, and more, none of the physical controls on the printer will work much longer, even the power of the power button.  Have to unplug the power off.

  Ironically, I found since the 'solution' through this forum to get Support HP Center works again by uninstalling a recent Windows Update, but do me no good now.

  I tried to uninstall and reinstall the software of the driver several times without success and I'm worried that the function keys not working not not at all on the printer indicates an internal matter that cannot be repaired.

  Anyone encountered this problem?

  Hello - Thanks for the reply.  Power the device power on and off has not fixed anything.  However, suspecting an internal firmware issue, I did a search on the web to see if there was a mechanism to reset.  I found a very useful website that describes three levels of resets, and the second level one (#6) fixed my problem.  I'm surprised HP doesn't have this information in its documentation or on its website.  I understand he has the potential to be used for the wrong purposes and perhaps make an irreparable problem, but it is clearly the solution to an inoperable Panel.  My printer was working fine before this problem and is now back to work again.

  http://resetprinters.com/three-ways-to-reset-the-Photosmart-Premium-fax-C309a-all-in-one-printer/

• HFM login and a newspaper ad the question

  For some users, it takes a long time to log in HFM applications and finally gets expired or it even made connection, while saving a new log it is taking too much time processing and throw an error that it cannot communicate with the server.

  Sometimes, when we use a short name in the label name box, the log is backed up. Is there a any restriction for the label name while reading a newspaper. Help, please.

  Thanks for the help in advance

  Thanks CBarbieri for your help.

  If all goes well, we solved the problem by resetting the iis and restarting services HFM.

  To restore the iis, go to cmd and return type iis.

  After this stop all the HFM related services and restart again.

• Someone at - it install the last update to Acrobat DC and shared commenting on the questions?

  Just installed the latest version of Acrobat DC. Failed to send a document to the shared comments. Get the error "failed to create shared folder.

  Hi Christa, Mike, all,.

  Today we released a hotfix that resolves this problem shared his comments that was recently introduced. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html

  Please give it a try and let us know.

  Thank you

  -ashu

• I'm opening table row in a popup with the help of change. If I opened a line to edit, and then if I cancel the popup and if I open some row of the table, then instead of the newly selected line diff, previously selected line becomes open question. Help, p

  @Code is:-

  I have a panelCollection which is having an ADFTable (VO) and < f: toolbar > < coomandToolbarbutton > IE change by clicking on modify the selected line of the tbal adf becomes open in edit mode in a popup. Buttong ActionListner change creation popup

  {} public void handleEdit (ActionEvent actionEvent)
  Add the code in the event here...
  
  Line selectedRow =
  (Row) ADFUtils.evaluateEL ("#{bindings.") BtEsAwardsSchemeSetupVO1Iterator.currentRow}");
  Line selectedRow =
  (Row) ADFUtils.evaluateEL ("#{bindings.") BtEsAwardsSchemeSetupVO1.currentRow}");

  Tips RichPopup.PopupHints = new RichPopup.PopupHints ();

  this.getAddEditpopup () .show (hints);
  }

  Pupup has two buttons for Submit and cancel.
  Click on Cancel button on the popup, it id hide. The question is, suppose that the table is to have 4 lines so if I first select third row and click on change that becomes open editing on a popUp, but if I click on the Cancel button and their selection a few rows of table (Say first line), the previously selected (3rd row) rank only becomes open again in popup instead of the newly selected row.
  Cacel code

  {} public void handleCancelAwards (ActionEvent actionEvent)

  Add the code in the event here...

  ADFUtils.invokeEL ("#{bindings.") Rollback.Execute}");

  this.getAddEditpopup (.cancel ()); [I also tried with hide and seek but not worked]

  }

  Thanks in advance and thanks for your time

  It may be a problem with the combination of: immediate = true, rollback, and af:popup.

  You can try adding af:resetActionListener to the Cancel button.

  BTW, your managed bean is in the package that start with uppercase ("Bean"). (if you should refactor this to "beans" (for example))

  Dario

• 19.02 Firefox breaks the position of the background image.

  Hi, I have a jQuery plugin that worked well until I downloaded Firefox 19.02 now the Image slider does not work.

  More precisely the position of backgroundImage doesn't seem to work. Instead of each piece of the picture being selected using a specific and different up and left (x and is position on the Image) all the pieces are showing the top left corner! It worked well in the earlier version of Firefox and still work on the latest versions of Google Chrome, Safari and Opera.

  Appreciate any help you can offer.

  TC

  It's logical. If Math.abs (yPos) works, then yPos cannot be a string, and therefore cannot contain units.

• position of the control

  Hi all

  I need to know the position of the control on the Panel frontal wrt the screen and not the Panel. Currently, if I have a chart on a FP, and I use the 'Position' property, it returns the top and left position of the wrt Control Panel. I need the position of the control on the screen and not the Panel.

  How can I get this information?

  Thank you

  Ritesh

  You have to take the position of the front panel (use the FP Panel limits) and then take the position of the control so add the top and left values of positions, there you go you've got the position of the order with respect to the screen.

  Note: All doing this keep the origin of the left and top FP exactly meets the edges of the Panel so that you can get the actual position.

• P1102w offline and can't find the html for OS x 10.9 configuration utility

  I installed the 1102 on my network, it was printing fine... it off for a few days. Now when I turn it on, the light blinks blue network, when I try and print it says 'the printer is not connected. If I look in system preferences, the printer shows a green light next to it.

  But I have no idea how to get to the online tool that allowed me to configure network settings and see if they have changed. There is no option on any screen taking me there. When I click on "Options and supplies" there is no button to take me to the HP configuration page, and I don't see any software on my computer to allow me to set it up.

  I just put a WPA password on the network, and I know what the question perhaps, but I still don't see how to get to the place where I set up the printer (was it a URL.. .but where he is hiding?)

  Hi @laurad1 ,

  By your post, I see that you cannot set up the printer again on the 10.9. I can help you today.

  Since you have changed the WPA password on the network, you will need to restore the default settings of the printer and set it up again on the network.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Restore the settings of the default printer wireless.

  1. turn off the product.
  2. hold the wireless button and the Cancel button and then turn on the product.
  3 press and hold the buttons until the printer stops making noise, then release the buttons.

  Print a Page of Configuration to ensure that IPv4 and SSID are deleted from the old settings.

  Print a Configuration Page.

  Remove the printer in printers and Scanners. Plug the USB cable from the printer to the Mac, and add the printer again. Make sure that it shows just the name of the printer. LaserJet P1102w. You may need to run the Apple updates.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps rather than watch the video if you want.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Make sure that the infrastructure is selected. Status: Make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear)

  Remove the USB printer in the list of printers and Scanners window.

  Disconnect the USB cable and try and print.

  If you need help, let me know.

  Good day!
  Thank you.

• Unable to connect to oracle DB using VBA and you are prompted with the error:-the client components and Oracle network have not been found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or installation of the

  Hello

  It would be helpful to me if someone can give me instructions on setting the version of driver or oracle client required to connect to the the Oracle DB using excel VBA

  My config: -.

  Windows - 8-64 bit

  Excel 2013-32 bit

  The components of the client / I should install, and how to solve the question below...

  I tried the VBA code... but you are prompted with the error message above

  Void Oracle()

  Con Dim As ADODB. Connection

  Dim rs As ADODB. Recordset

  Dim query As String

  The con value = New ADODB. Connection

  Set rs = New ADODB. Recordset

  strCon = "Driver = {Microsoft ODBC for Oracle}"; "." & _

  "CONNECTSTRING = (DESCRIPTION ="& _.

  "(ADDRESS =(PROTOCOL=TCP)"& _

  "(HOST = HostNumber)(PORT=PortNumber))" & _

  "(CONNECT_DATA = (SID = SIDNumber))); UID = username; pwd = password; »

  con. Open (strcon)

  If err. <>Number 0 then

  MsgBox ("Oracle error:" & vbCrLf & err.) Description)

  On the other

  MsgBox ("Oracle DB Connection successful.")

  End If

  End Sub

  I'll replace it with the values of host origin...

  Thanks for the suggestion you till u gave...

  complete solution is in the link below...

  https://itkbs.WordPress.com/2014/07/28/how-to-install-ODBC-driver-for-Oracle-in-Windows-7/

• required fields and auto submit to the table

  I have a table that has the delivery content properties immediate and immediate to true. This table has text entry and auto submit and required to true. the question is I just wanted mandatory fields appear when I press the button and the fields are empty when I fill one and give tab.

  I auto submit to true to add lines when the values of each entry does not get lost.

  Help me

  I put inputtext absence form and sup = true property and solve my problem.

  Thank you very much for your help. I appreciate it!

• Jump backwards and forwards without answer to question

  Questions that I get sometimes; when im using the button back on reading control without answering a question and return back to the question, it won't allow me to answer the question (get a message, "You have not answered this question". There are some users who need to play back and forth. Is it a bugs or some set up I have to do?

  Personally I have even shut down the PlayBar totally during the transition to the first slide of the Question. This can easily be done by assigning the value 0 (zero) for the cpCmndShowPlaybar system variable when entering the first question slide (does not exist in the Action on the list of slides to enter) and eventually turn after the slide of score or the last slide in the question.

  Be sure to not remove the back button, but cut the movement back in Quiz preferences and agree to have the rear buttons automatically deleted. Because if you remove them manually on the slides, they could reappear magically...

  Lilybiri

• Column position of the cursor

  Among the interesting features of Homesite is that you can in addition to dsiplaying line numbers, you can click anywhere in your code (or text file), and the lower left corner of the screen will indicate the column position of the cursor. This is useful when parsing text files and debug javascript that gives you a line number and column position of the error code. I have line numbers enabled in Dreamweaver, but is there a way to determine the column position of the cursor (the number of characters in the line)?

  Thanks, I did a feature request.

• The question regarding the positioning (differences between Design view and live view)

  I don't know how to perform the same search to see if this has been asked, nor how to properly ask the question... but here goes...

  I have a div id "container" which is limited to large 968px.  Inside that I want to have 2 columns (one containing nothing else than a background image) next to each other.

  I called a left_column and other right_column.

  The background image will be in the left column and is high by wide 290px 550px.

  I used CSS to define the following:

  {#left_column}

  background-color: #FFF;

  background-image: url (.. / images/waterfall.jpg);

  background-repeat: no-repeat;

  position: relative;

  height: 550px;

  Width: 290px;

  margin-right: 10px;

  float: left;

  }

  {#right_column}

  height: 550px;

  Width: 650px;

  margin-left: 10px;

  padding-left: 12px;

  position: relative;

  left: 10px;

  }

  In "design mode" everything seems wonderful.  When I go to the live view (and/or browserlab) the text in the right-hand column shows the usable space is only 300px.

  If I change the width of the right_column to 'auto' can live view (and/or browserlab) everything seems all I want, but in the view design right_column width is closer to 900px and goes the WAY out of the container (which makes it very difficult to see the text as I type).

  No idea what I messed up?  What other details do you need?

  Thanks in advance.

  mikemendo wrote:

  I wanted the left and right columns to be the same height, so the footer doesn't look like it has been 'floating' lower from one side to the other.  The width is controlled by the banner image 968px.

  Columns of Google to 'false '. It is a technique that requires a background image set to "container".

  . The image is repeated behind the "right column

  to fill the depth and give the impression that the two columns are of equal height.

  mikemendo wrote:

  In the left column photos is a background image, so if I put the height and width, then the image is not of appropriate size.  The reason why I did a background image was to follow the advice of David Powers in his article on "your first site.

  This technique is good to use.

  At present the total width of all your elements adds to 982px that is wider than your container attached to 968px. Margin and padding ARE added to the width of a 'container' if:

  290px + 10px = 300px

  650px + 12px 10px 10px plus 682px

  TOTAL = 982px

  You can adjust the math for the total width does not exceed the width of your "container".

  Use this css and everything should work:

  #container {}

  overflow: hidden;

  margin: 0 auto;

  Width: 968px;

  background-image: url (.. / images/rightColBg.gif)

  background-repeat: repeat-y;

  }

  {#left_column}

  background-color: #FFF;

  background-image: url (.. / images/waterfall.jpg);

  background-repeat: no-repeat;

  Width: 290px;

  margin-right: 10px;

  float: left;

  }

  {#right_column}

  Width: 656px;

  padding-left: 12px;

  float: left;

  }

  #footer {}

  Clear: both;

  }

• Profile of Newbie Xcode provision of the question and problem recording peripheral Dev Member Center

  Help!  I am a user of Xcode newbie. Just signed up for a developer account (free version added to my existing Apple ID).   I followed a tutorial to make a few changes to the Apple TV 4. In the tutorials that seem very useful do not have additional info for potential problems as those I seem to face at every turn. As far as google can be useful, it can also be a time suck empty soul.  I have a life to live then all help to speed up the answers to these questions would be greatly appreciated.

  -Launch Xcode → click on create a new project in Xcode → select Application under tvOS → Application unique view, and then click Next. Fact

  - In the product name field, enter a unique name such as KodiAppleTVforYourNameHere (done, but I have a problem I can not find the answer to...), and then click Next → create

  The 'organization' identifier is empty and I do not know what to enter and the tutorial says nothing...

  

  - In the drop-down box team, select your personal team and click the question difficulty to solve problems of commissioning. You will ensure that you are connected to Xcode with a free Apple Developer account. You can learn how to do it using this tutorial.

  I get a "no provisioning profiles found.

  When you click on "solving the problem", I get a pop up saying "no device - create a profile doesn't require" fitted with a registered in space subscribers.

  

  Then I went to the Member Center and can not find the place where to save a device... nor can I find detailed (for a novice like me) instructions on how to do it.  I tried to follow these instructions, but had problems as shown below.

  1. go to Developer.apple.com...

  2. go in the "Member Center". (This is not an option that I see...)

  

  3. go in "Certificates, identifiers & profiles." (Went straight to this...)

  4 Select "Devices" on the left navigation. (nowhere to be found... and am stuck here...)

  

  .... 5. click on the sign "+" to add a device.

  .... 6. enter a name for the device and the UDID.

  .... 7. at the bottom of the page, select continue when you are finished.

  .... 8. at the bottom of the page, choose "Save" to save the new device. Repeat these steps to add up to 100 devices on a regular account.

  These steps seem easy enough, but I continue to find myself in a position that some things I should do just are not there... like the devices section not found in the center of development Member?

  Help or direction would be greatly appreciated.  Thank you!

  Have you ever this resolved? I'm having the same problem.

• Take the initial and final position on a scroll event

  Hello world

  First of all thanks for the help I receive, I have a question was.

  I have a ScrollPane and I want to know the position of the scroll pane to start the ScrollEvent.Begin, and also the position where I release (Scrollevent.Scroll_END).

  Thank you for all the support

  Don't the scrollX and scrollY values are for?  See the docs.