Someone at - it install the last update to Acrobat DC and shared commenting on the questions?
Just installed the latest version of Acrobat DC. Failed to send a document to the shared comments. Get the error "failed to create shared folder.
Hi Christa, Mike, all,.
Today we released a hotfix that resolves this problem shared his comments that was recently introduced. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.
More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html
Please give it a try and let us know.
Thank you
-ashu
Tags: Acrobat
Similar Questions
-
Original title: updates
Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed. Although I tried to reset nothing help.
Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.
As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:
Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.
Then you can try the following:
1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool
3 components of reset update - https://support.microsoft.com/en-us/kb/971058
4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "
If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.
If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.
-
original title: kb2585542
I have a 2008 standard server, installing kb2585542 last updated security. error code is 80070005. my server is 32-bit xenon.
THX
kg
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads -
The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?
Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
NVIDIA GeForce 6600GT driver has stopped working since installing Windows 7 updates. Why? And how to remedy the situation. Tried uninstallingc download update drivers, etc. Still no luck.
Message that appears is: -.
Windows has stopped this device because it has reported problems. (Code 43)
BB
Install the latest driver from nVIDIA:
http://www.nvidia.com/object/Win7-WinVista-32bit-260.99-WHQL-driver.html
http://www.nvidia.com/object/Win7-WinVista-64bit-260.99-WHQL-driver.html
"A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
I'm on the last update of lightroom 5 and captive capture still does not work with el Capitan. are there plans to upgrade or do I have to buy the new lightroom 6?
Hi Yanni,
Tethered shooting works fine with Lightroom 6.4 on El Capitan.
You can then go ahead and buy Lightroom and perform the tethered shooting.
Kind regards
Tanuj
-
Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.
Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)
Now just got a new error code: 6 to 8.
The updates, I can't update (!) are:
- SQL Server 2005 Express Edition Service Pack 4
- Update of security for MSOffice 2007 System
- Update for MS 2007 Office system
- Update for MSOffice Outlook 2007 Junk email filter
Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse! ;-)
Thanks in advance
Sharon
original title: error codes: 6-8 and 80070641
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Satellite A500 PSAR9E. Someone tryied to install the SSD to conn JSSD?
Hello!
Now my satellite A500 is completely disassembled and I am looking for what is inside and what is possible to upgrade. The most interesting for me is jssd connector on the bottom of the motherboard.
This information was already mentioned on toshiba American forum but has not ended.
It's someone who's been tryied/successedid to install the ssd drive to this place or this connection is physically disabled by the BIOS of the motherboard?And including this interface mSATA 1.8 inches?
I myself want to try this connection if I find this ssd or the usual sata interface cable.
If the micro SATA port is available on the motherboard, the interface should work.
But there is a question open about the BIOS. If the BIOS would not provide support for the micro SATA, then new SSD connected would be not recognized
However, I have not found useful information on BIOS support... -
Last update of Windows XP and SVCHOST. EXE problems?
Hello. My PC runs XP SP3 (HP Media Center) 3G of ram. It worked very well lately without any problem whatsoever. This morning I started as usual. I noticed the familiar Microsoft Update 'yellow shield' in the lower right of the task bar. I flew over the mouse over it and it read "download updates 0%. He never got above zero (or I couldn't open Update window). I pulled up the Manager tasks and SVCHOST. EXE has been hogging 99% of my CPU. I have everything closed and stopped and restarted. After the reboot (thinking it was a problem of Windows Update), I went on the Microsoft Windows Update site and clicked on 'Express' updates to try to update manually. He began cycling (search?) updates and soon SVCHOST. EXE, roared back to life and pegged the CPU at 99% of use (effectively maxing out the CPU at 100%). Page Update MS has never reached the point where it stated that I needed updates... He kept just cycling and research. Once the SVCHOST. EXE is happening (I tried this update 3 - 4 times today) it does not stop (if I close the window of Windows Update or not). I need to stop and restart. When I stopped, I see a prompt "end program" for RUNDLL. EXE that (when I try to 'end') translates into a prompt "unresponsive". I have to leave the program to close. As a precaution I've scanned with MSE, Malwarebytes, Spybot and SuperAntiSpyware and all were clean. No problem with MS Security Center is. I never saw my computer behaves like this before. At the time of this post, it seems fine except when I try to update on the Microsoft Site. Is there a bug or a problem with the last update? Any thoughts appreciated. Thank you.
Install KB2846071 for IE version 6: http://www.microsoft.com/en-us/download/details.aspx?id=39519
Or update IE 8 version: http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspxNew info: the best way is to KB2870699. He has the problem with high CPU.
http://TechNet.Microsoft.com/en-us/security/bulletin/MS13-069 -
Hi, I'm already a subscriber of CC plan months photograpy, but wen I install the app photoshop via the CC Panel, he tells me I have 30 days trial, why this?
When I try to register my product, he said, have not hava all plan
Someone has an idea?
Please disconnect and reconnect to creative cloud, you can consult the links below.
- https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
- https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
I hope it would help.
-
Why don't I receive DEHAZE control with my last updated to 6.3 and updates before?
When I bought 5 Lr in March 2014, I thought that I had received all of the upgrades.
I don't know what happened, but I don't have the DEHAZE cursor in my version 6.3.
I don't miss something else...
When I bought 5 Lr in March 2014, I thought that I had received all of the upgrades.
But this isn't the way it works, you get updates of bug fixes and new cameras and new lenses. When Adobe adds a feature, like dehaze, it goes in Lightroom CC, not in Lightroom 6. Most likely dehaze will appear in Lightroom 7.
-
Last updated DC Acrobat broke the functionality of properties toolbar
The last DC Acrobat update, that installed on my computer yesterday, July 13, 2016, (Unfortunately my update was set to install automatically) broke the properties toolbar feature. Specifically regarding the modification of the text in a text box. If I highlight the text box and bring up the properties, it works - I can change the color of the border of area of text etc.
However, if I double click in the text box and highlight the text itself and try to change properties, the police and the font size fields are gray. It is if I open the properties toolbar before you enter in the text box.
If the properties toolbar is NOT open and I double click in the text box, the properties toolbar even will not open if I try to open it.
Hi Andrew, all,.
We have released an update today which solves the problem of the properties toolbar and now you can continue to use it outside of the app commenting as well. Please open Acrobat or Reader DC and visit help > check for updates to ensure that you are on the latest patch.
Details on the release: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-02-2016.html
Please let us know how it goes.
Thank you
-ashu
-
I already tried uninstalling and reinstalling several times and that does not work, I simply get the same result.
I start to download, through all the steps and when it is ready to be finished install it says in a pop-up, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »
Right-click on the downloaded installer and use run as administrator.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Hi all.
I'm trying to 15.010.20056 update is installed on 15.009.20079 version of Acrobat Reader the domain controller that was installed as integrated (with the updates included) package in our corporate environment. So during the installation, I get these errors: 1328 and 1603. If I uninstall the current version of MS, install 2015.007.20033 (most recent Adobe site) version and then install updated security, everything is going very well. How to solve this problem?
I assume that you have installed 15.009.20079 by AIP. Is that this is the case, then you won't able to correct this AIP installation at 15.010.20056.
Because of facilities using setup.exe will be updated at the latest by only applying the fix. Please refer toRe: AcroRdrDC1501020056 msp and msi as always ~ ~ for more details.
If you have not used of AIP, please let us know so that we can continue.
Maybe you are looking for
-
Hi, I put the web filtering to the general, but there are some * site that always appears. Please notify
-
Questions about compression of all files
BRUCE HAGEN ATTN = I NEED TO FOLLOW THE HELP - I COMPACTED ALL FILES, BUT YOU ALSO GAVE ME A URL - THEN - I ALSO RUN / PLEASE COMTACT ME ASAP - I'VE TRIED TO DELETE THESE FILES - YET STILL PANIC - IF BRUCE, NEED SOMEONE NOW PLEASE PLEASE BRUCE OR ANY
-
Please help in need a download that I play on my acount of life secoend and I can not play and Games downloaded ethier please help
-
HP ENVY 17-n046nd: SSD upgrade
Hello I replaced the M.2 SSD existing with a "Plextor M6e M.2 2280 PX-G256M6e, 256 GB SSD", but unfortunately the laptop does not recognize it. Is there a solution for this problem? Best regards Nick PS: I also upgraded the memory from 8 to 16 GB (Co
-
Hello I am trying to connect to an access point to distance within our network... is it possible to activate telnet or ssh access point by WCS or https. Please let me know Knockaert