Fuse with iGroove, speakers, USB connections

Similar Questions

• My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years

  My Dell V313w stopped printing/scanning mode wireless or with a direct USB connection after working flawlessly for 2 years - any changes made on the network wireless to our knowledge.  Printer works fine in USB mode on old Windows 2000 office.  Network sees the devive asked to detect devices.  Wireless to the printer hardware is perhaps not handshaking...?  Please let know us that he is a very curious pnnc.

  Windows 7 is updated as well as the print driver.  Thank you.

  Hello abir.

  Thank you for giving us the opportunity to help you with your concern for Windows.

  From your post, it seems that you cannot print from Windows 7-based computer.

  When you say "no changes made on the network wireless to our knowledge", which is the type of network you're talking about? (Workgroup, domain)

  It is a difficult problem to diagnose because there are many printers on the market and many reasons why it could not work.

  We will try the steps from the following link and check if this solves the problem.

  Why can I not print?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-i-print

  You can also check this link:

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with the State of the question, too, let us know if you need help with Windows problems and we will be happy to help you.

• WRT160NL connection with n and USB connection problem

  Hi guys,.

  I have the Linksys WRT160NL router and I have two fundamental problems with that:

  1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...

  What should I do to make it work with n as well?

  2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.

  I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.

  I don't know what to do to solve this 2 problems... Maybe someone could help me...

  Thank you

  Try changing some settings on the router wireless.

  Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.

  Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.

  Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.

• Mouse USB, connection loss

  I have a HPE170F of desktop running Windows 7 Home.  About a week or two ago I noticed that the USB devices are briefly drop their connections.

  There are a number of ways, it is the case, but the most common is a slight hiccup in my mouse works.  It is even more obvious and boring everything at stake, there will be a break in the mouse works before returning to normal.

  Usually, but not always, accompanyed with the light sensor / on the bottom of the mouse, go to offshore.

  That usually doesn't happen until the program and a computer were aired for a while, and it feels like it is becoming more frequent, more I play, and breaks to lie down in the long term.

  Sometimes I have to disconnect a USB device and plug it back again so that it can work.

  Sometimes, even unplugging / plugging does not work.  Usually when this happens, all USB devices stop working and the computer must be restarted with the power switch.

  I tried several mice in different USB ports (front and rear) with no difference.

  The USB keyboard and a USB drive have similar traits (the player will suddenly disconnect and reconnect).

  I tried with no peripheral USB connected other than the keyboard and mouse.

  I went into Device Manager, removed and hubs USB again detected and disabled the option to allow the computer to turn off the devices.  It made no difference.

  I have run virus scans, auditor system files and verified that everything is up to date.

  Am that I up to this got to be a motherboard problem?

  Thanks in advance.

  Thanks for the suggestion, but it led naturally to a little problem of chickens and eggs.  This HP desktop computer has only USB (wells and firewire) ports, so at some point during the withdrawal of all USB devices, I eventually remove those for the keyboard and mouse, which means of course I have to restart with the power switch.

  I think I can have tracked down the problem, and I think it was a number of things.  I think that my mouse original (the HP base that came with the computer) crumbles.  I don't know why it does this, but my registry contained dozens of entries for my HP mouse (perhaps even one for each time it was unplugged and reconnected).  All entries in mouse are perhaps why the other mice were who have disorders.

  I cleaned the registry and I changed to a mouse of difference and so far I have not seen the problem again.

• USB connection for speakers/conrtols do not work?

  Hello.

  My daughter has a bed that connects to an MP3 player via a USB connection and speakers and play controls on it. SanDisk Sansa clip plus is not working, looks like he's trying to connect to a computer to receive information. Is there something I should do differrently or if this feature is not supported with this MP3 player?

  A bed that connects to an Mp3 player? Cool!.  The Clip + has two modes, the MTP and MSC mode (settings > system settings > USB). If you transfer files under the PSG, the songs will not appear on the computer when you connect in MSC mode and vice versa. Most likely your bed does not recognize MTP peripheral devices. That being said, try transferring music on both msc and mtp and do a test. Try to connect the Sansa to your bed under MSC and MTP.

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

  My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

  The photos are not stored on the sims, sorry.

  You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

  Recovery mode:

  Turn off your iOS device.

  Plug charge cable to the computer only (not to the device yet).

  Open iTunes on your computer.

  Hold the button to power on your device and do not let go.

  Plug the cable into the device while keeping the power button.

  Wait for the computer to detect the device and wait that he eat.

  Restore as New first, then restore sauvegardΘ if you wish.

  https://support.Apple.com/en-us/HT201263

• Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

• Satellite M30X-129 loses connectivity with the external USB device

  I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

  Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

  If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

  I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
  Thank you
  Abderrahman

  Hello

  This happens also with the external USB mouse?
  This occurs if the power adapter is plugged or only if the laptop running on battery?

  In-hubs properties > Device Manager USB root-> power management
  You will find the option called allow the computer to turn off this device to save power.

  I would recommend the brand and disable this option.

  Maybe it helps.

  By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

• I try to register with a mixer via a usb connection. I can tell I have the settings correct, selected in the hardware Audio section. It worked before, but it's not. Any ideas? It's driving me crazy!

  I try to register with a mixer via a usb connection. I can tell I have the settings correct, selected in the hardware Audio section. It worked before, but it's not. Any ideas? It's driving me crazy!

  That entry of casings do you use on the Yamaha and what you've plugged into them? With the whole level at about 01:00 controls, as Neil suggests, increase the Gain until the red LED on the channel starts flashing. And then put it down a bit so that it no longer lights except very occasionally. You should then see the green signal LED flashes but not the red. You should then have reasonable level in hearing.

• HP Officejet Pro 8620: HP laptop with Windows 7 not connecting not (either USB or wireless) for HP Officejet Pro 8620

  Have tried reinstalling the printer software, re-start and separately from wireless and USB connections.  Default printer is displayed correctly, print jobs appear in the queue, but does not print... and Yes, there is paper in the tray :-)  Enjoy all the assistance!

  Hello

  Thank you for using the forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• HP M426fdn MFP - scanning with a USB connection for laptop possible?

  Can anyone confirm that scanning HP M426fdn will work if your computer is connected by USB instead of network?

  Trying to confirm this before buying.

  Thanks in advance,

  Brian

  Hi Brian,.

  Yes, you can use any of the printer by using a network connection or a direct USB connection to your computer.

  Be aware that this connection allow using one computer, not several.

  Shlomi

• I bought a HP Netbook with USB connection

  My question is how can I install my

  Photoshop v 6 on my netbook via a USB connection?

  What do mean by USB...

  I can understand that you won't have the built-in CD player...

  If you have the external CD drive, connect, and then double-click setup.exe. Remember, if you have already used your copy on both machines, you will not be able to install on the third machine.

• Sansa fuse with rhapsody

  I can not get Rhapsody to recognize my 8 GB sansa fuse.  It was originally the case, but now won't.  It will recognize my 4 GB fuse.  I have 8 GB sansa fuse with 1 GB expansion card.  I have the latest version 1.2 installed.  I have the latest version of the Rhapsody software installed.

  Plug your rocket in MTP mode, and then open Windows Explorer (my computer).  Where do you see your rocket?  It should appear as a device of media listed under "other".

  For Rhapsody work with your rocket, the computer needs to communicate with your device in two modes, with PSG for happy To Go (subscription).  MSC, purchased individual tracks or albums can be transferred.

  In Rhapsody 4 client, if the "rocket" is visible in MTP mode, it will show as a Sansa Fuze 4 GB for example.  If the device is in MSC, we will see something while CAPITALS such as E: SANSA FUZE.

  If you don't see any devices listed, or if the rocket does not list in Windows Explorer, open the Device Manager to repair the connection.  Rhapsody simply asks Windows for devices recognized, so let's see your PC communicates properly with the Sansa.

  On the "rocket", when you plug it in, makes her snap view writing / reading and then a connected icon?  This means there is no data transfer on USB connection (of the least, according to the Sansa).  You should see the activity, or hear the sound "ding" on your computer that the device is recognized.

  Device Manager located in batches if means, try to use right click on my computer, select manage, then click on Device Manager.  The "rocket" will be under Portable device.  Click on that, then the "rocket" appears.  Double-click on the "rocket", or right-click and select Uninstall.

  Then disconnect the "rocket", restart your computer, then once it is in place and running, try plugging your rocket.  We should see "new device found" and the drivers for your rocket should be reinstalled (part of Windows Media Player for the PSG).

  µsansa

• Photosmart C309 printer: change to usb connection

  I currently have a wireless connection to my computer.  How to change that to a USB, wired connection?

  Hey @dac71, welcome to the Forums of HP!

  I understand that you do not want to change to have a wireless connection to a USB connection between the printer and the computer. When you connect a USB cable, the printer automatically installs the correct driver and since you have already paid it works wirelessly, it would be seamless.

  If you're having trouble, and you have a Windows operating system, run the HP print and the doctor Scan with the USB cable connected and it will help: www.hp.com/go/tools.

  If you have a Mac and you need assistance let me know.

  If it meets your needs, please click Accept as Solution button below. If there is anything else I can help make sure you respond back and I will do my best to help!

  See you soon!