Satellite M30X-129 loses connectivity with the external USB device

Similar Questions

• Satellite A40: How to boot from an external USB device?

  Dear all,

  I wonder if it is possible to start A40 - 261 (BIOS v1.50) from the external USB device such as a flash or external HARD disk drive?

  Thank you in advance,

  Oleg

  No Oleg, it is not possible to
  You can only initialize the USB FDD, HDD, CD/DVD and LAN

• My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

  My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

  Hello

  1. do you have HTC Manager installed on the computer?

  2. have you tried it with different USB ports?

  You need the HTC Sync HTC phone Manager software.

  Method 1: Try again with different USB ports and see if that helps.

   

  Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

  If the methods above do not help, you can contact HTC for additional help.

  Here is the link: http://www.htc.com/us/support/

• Satellite A200 23W - no connection with the TV (VGA-DVI-tv)

  I tried to connect my SatelliteA200-23W with tv (DVI plug). Like cable, I had was dvi to dvi and my laptop has vga only (female) I got an adapter (VGA/DVI). After that I made the connection (my TV is also a Toshiba LCD 30 inch) and I used Fn + F5, with the channel setting DVI TV, I can't see or hear anything whatsoever!

  Any who tried to link its A Satellite with tv?
  Must say that I use Windows 7 edition.

  Hello

  To use the monitor external, you must plug the cable first. Then turn on the TV and choose the right channel on your TV. Next turn on the laptop and then you should be able to switch between monitors if you press FN + F5. Check it!

  Also, make sure that you use a high quality cable.
  You can use a cable without adapter?

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Satellite M30X-129 - no video on the second screen

  I have a M30X-129, which for the most part works fine. However, when I have a second monitor attached (for example, an overhead projector) everything is displayed outside a video/film clip, which appears black. This occurs if Windows Media Player or Realplayer is used. All other programs and images are visible on the external monitor or laptop screen.

  I installed Windows XP Pro on the orig XP Home version. All drivers were installed and updated as required. I thnk I have a Raedon graphics card.
  Any ideas on how to have movies/clips on the second screen?

  Thank you.

  Hello

  Most Windows applications and video cards do not support playback of video files on the screens at the same time. You can try to disable the video signal going to the built in LCD screen and display only through the projector.

• Satellite M30x-154 works only with the battery in use

  I own a Satellite M30x 154 and did so for two years. Now the laptop is more fuel with just the battery in use.
  It feeds well with the power adapter and the power indicator shows the batterys is full of 74%.

  Any ideas?

  What to say? The battery is possibly defective. The fact is that M30 x is old enough laptop model. Everything is possible.

  What happens if you start Notepad with AC adapter, then remove the connector ca? Can you use Notepad on only battery power?

• Help! WRT110 loses connectivity with the portable 2 Vista logon @ times!

  Equipment:

  Laptop #1: HP DV6338se (wife, owner for more than a year)
  -1.8 GHz AMD Turion64 X 2 Dual-Core Mobile Technology TL-56
  -1024 MB DDR2 memory
  -NVIDIA GeForce Go 6150 (UMA)
  -NVIDIA nForce Chipset
  -Modem 56 k Conexant High speed
  -Ethernet 10/100 integrated interface
  -Broadcom 802. 11b / g wireless
  -Windows Vista Edition Home Premium SP1

  Laptop #2: HP G60-231WM (it's me just bought)
  -2.10 GHz AMD Athlon X 2 QL - 64 Dual-Core Processor
  -3072 MB of memory
  -NVIDIA GeForce 8200M
  -NVIDIA nForce Chipset
  -Modem 56 k Conexant High speed
  -Ethernet 10/100 integrated interface
  -Atheros AR5007 802. 11b / g wireless
  -Windows Vista Home Premium SP2 (just updated)

  Router: RangePlus - n Linksys WRT110 wireless router
  (NOTE: I'm writing this post, the router is UNSECURED / default - only way to get ' Net)
  -WPA/WPA-2 with the defined user passphrase (encryption)
  -HOME_LAN (SSID, the visible value and broadcast)
  -DHCP range 192.168.254.x (side Internet - entering the Windstream DSL modem)
  -DHCP range 192.168.1.x (side Intranet - entrants from connections without wire/RJ-45)
  -Universal PnP enabled side Intranet
  -All settings managed manually

  Scenario:

  No matter what laptop is connected first, the * instant * the other laptop is trying to open a session, the TWO lose wireless connectivity and fail repeated to reconnect attempts (Vista offers options like ' get automatically the new IP address... blah blah blah 'or' Reset Adapter wireless... blah blah blah "-without success in both cases").

  Now check this: BEFORE, I bought new HP G60, I got an HP DV9308nr with Windows Xp SP3 and a USB wireless card (old WiFi card internal had, uh, 'grilled' so I replaced it with a Linksys WUSB100) - SAME router, SAME settings - NO problem at all!

  I tried WEP, like my machine (#2 above), his only; It seems like WPA/WPA-2, mine seems not - takes more time to authenticate, and then with WEP. I have not tried MAC address 'mapping', envisaged a "wall interface" (router snap and/or offend computer laptop into the nearest wall) LOL! Also seems no joy with assignments to static IP and security (WEP or WPA)... I'm a 'power user' or a 'experienced networking type dude"- but I'm stumped! Help! Thank you...

   

  [Mod Note: Correo electronico deleted.] PM user for more details].

  This shit ROCKS forum! Thank you majorly to Ikester! The tips and guides me related were just the ticket... As I write this, my wife is on Facebook, and I'm here... no problems so far! First, he's even worked as in a week (talk about withdrawal symptoms)... So with my sincere thanks, this post is solved!

• TCP/IP connection with the external device

  Hello

  I need establish a TCP/IP connection to my hardware device that ip (10.102.20.90) and the port no 9012 by static ip setting.

  Since I'm new to this Protocol, I am a little worried about how to make the communication between my pc hardware. Here my labwindow code to serve clinet and material as a server. Having established the successful connection, I need to read the data coming out of this port.

  Please help me make this communication happens.

  I'm working on version 9.0 of Labwindow.

  A good starting point would be to consider the application for TCP/IP client sample that is bundled with the CVI. You can find it on \samples\tcp\client.cws

  Martin.

• Lexmark Pro 901 printer loses connectivity with the computer

  I have a Lexmark Pinnacle Pro 901 printer I bought at the office supply store there are several moonths. I hung it, and it worked for a short period, then I got a screen prompt saying that there is no connection between the printer and the computer. I was on the phone and even authorized Lexmark technicians to have remote access to the computer 2 times. I've been on the phone with them about 10 times and had even them I would send printer back and they sent me new printer. I even had a friend local tech come and he has reinstalled printer drivers, each time, that it's the same thing, printer will work for one or two jobs and then stops printing. I can still make copies and yesterday I scanned and sent by e-mail a document, the Green WIFI light is on. I'm so frustrated that I just want to get rid of this printer. Help!

  Hi BrianParkerWX,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en&ProductCode=LEXMARK_PINNACLE_PRO901&focusedTab=downloads#1

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Satellite A300-19 q - how to start with an external USB drive

  Hi all!

  I have a (old) TOSHIBA Satellite A300-19 q bought in 2008. I wanted to do a clean install of Windows 7 by reformatting my HD. The problem is that my internal DVD drive no longer works. So I tried to boot from the Windows 7 DVD installation with an external USB drive.
  Unfortunately, I couldn't find a way to boot from USB devices in my BIOS options.
  My BIOS is up to date (version 4.20) from Toshiba Web site.

  So I was wondering, does anyone know if the A300-19 q can boot from USB devices?

  Thank you in advance.

  I have A300 at home but I never tried to start with an external USB device.
  Start your laptop and press F12 to get into the boot menu. There must be USB option. What happen when you try to use it?

• Satellite M30X-129: recovery CD can be run from an external drive?

  My wifi seems to have packed - recognizes nearby wireless networks but does not connect to them - so I will try to use the recovery disk product in the hope that it will bring back wifi.

  However, the DVD Multi drive does not work - light flashes to indicate some sort of activity, but no drive appears in my computer. I think that if I buy the external drive, I can run the product recovery disc for this.
  Is the drive Toshiba external DVD SuperMulti (PA3454U-1DV2) compatible with the Satellite M30X - 129 P - M 735? Product recovery can be run from an external drive (bootable?)?

  Any advice would be greatly appreciated!

  Hello

  According to this page of Toshiba, the drive is compatible with your device:
  e http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic = 1 = us & selSeries & selFamily = 2326 & SelCategorie = 2319 & family = 2326 & selP roduct = 98795

  The fact is that only the boot device options available: USB-drive floppy/disk HARD/ODD/LAN
  I know you can only boot from external CD/DVD drive if the device supports this option and the unit.
  In my opinion be100% sure you should ask ASP for advice.

  But know one other question: do you have you boot from the restore CD to recover the operating system?
  If you want to recover the operating system, you have to start on this CD and do not run it under Windows. Check it out

• Satellite C660 WIFI does not connect with the channel 1 of the router

  Hello

  I have this problem for several months. I connect my laptop with the D - link DIR-615 as a WAP browser.

  I can't remember, but the fact is that I can't connect more with channel 1 of my WAP.
  Connection with the other channels is no problem.

  Other laptops or the available have no problem connecting to channel 1.
  He's tried a recovery, remove and reinstall the driver for my WIFI.

  All know what to watch?

  Kind regards

  Jacky Deschepper

  Where have you changed channels settings: within the router or the wireless network adapter?
  Is that it s any laptop you are using. It s always a matter of the WLan card that is integrated.

  Usually, you can change the Wlan card settings in the properties.
  Go to Device Manager-> Wlan card-> right click Properties-> Advanced tab
  Here, you would be able to change the available settings.

• Keyboard Slim lose the connection with the Dell coming 11 Pro

  Someone meets keyboard slim interruption of connection with the Dell pro 11 site?

  He might have to unplug the keyboard, and the re - attach the keyboard to the Tablet again to use the keyboard.

  I have two Dell 11 pro + keyboard slim venue. Both devices have this kind of problem.
  It's absolutely wrong.

  How to solve this problem?

  Besides working with Dell Pro they explained to me that the keyboard must be used on a flat surface (not towers for example) and the keyboard & tablet should be at an angle of about 117 degrees between them.  Now, of course, you can't measure it, so just assume if you use on a table or desk and its supported properly you have to the correct angle.

  I find that if the keyboard does not after sleep or start arriving, simply lift the keyboard out of the surface of the table a few inches and let it fall down.  It will immediately start working.   I think that there is a sensor in the keyboard, which is not always realize or to calibrate properly in coming to life.

  If you have complications beyond the keyboard chip out of sleep, I'd take it upward with the support to push the issue.