Fusion 3 interfering with hotspot of spaces

Similar Questions

• Something about iPhone interfering with data

  I went to Europe about 2 months ago and used different sim cards while there. Since returning my data almost never works, except very rarely and randomly at 1 x. My (Verizon) cellular network works, as I can call and send texts, but it is only the data that will not work. I deleted all the apps that I downloaded abroad.

  Here's the weird part: when I reset my iPhone completely and erase all content, data works. As soon as I save the data stops working. If there is something on my phone which is somehow interfering with the ability to use the data. I tried to use repair backup to decipher, but even "repaired" backup will not make the data available for use. Any thoughts on what could be causing this interference or what I can do? I have photos, contacts, notes and settings of the Agenda that I don't want to lose.

  Thank you!

  Hello

  Try following the steps outlined here:

  If you cannot connect to a cellular network or cellular data - Apple Support

• Optional hardware update interfering with internet connection

  I downloaded two support.microsoft.com optional hardware updates this past weekend, and one of them is interfering with my internet connection.  I am running Windows XP Edition family and try to use internet explore to connect.  I talked to tech support at my ISP and determined that it is not a problem with their service.  How can I identify what update caused this problem and uninstall it?

  You should get the hardware updates directly from the manufacturer of your hardware rather than rely on Windows Update.

  Suggest that restore you drivers (if possible) for optional hardware updates two you installed and check the site of the manufacturer for the most recent update (if any) and install them.

  http://support.Microsoft.com/kb/283657

  If you want to diagnose that we (update caused the problem), after removing the updates, install one, if you have the internet connection, then this is the 2nd which caused the problem. If your internet connection is missing, then it is one that you have installed.

  K

• Is it safe to defragment with low disk space?

  original title: space/disk defragmentation

  Is it safe to defragment with low disk space?

  Hello

  I also see your message here. Please continue posting in the same thread.

  A volume must have at least 15% free space for disk defragmentation Defragment completely and properly. Disk Defragmenter uses this space as a sorting for the fragments of files box. If a volume has less than 15% free space, Disk Defragmenter defragment only partially. To increase the free space on a volume, remove unnecessary files or move them to another disk.

  For more information visit: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/defrag_defrag.mspx?mfr=true

• I want to export file to a specific size without changing the size of the contents of the layer. for example. the image in the layer size is 20 x 20 px, but I want the file exported in 40x40px with a transparent space.

  I want to export file to a specific size without changing the size of the contents of the layer. for example. the image in the layer size is 20 x 20 px, but I want the file exported in 40x40px with a transparent space. @divyamanian

  You can now do with the new export as a dialogue using the "Canvas size" section

• Find the store of data with more free space.

  So I'm trying to build a script to configure the virtual machine.

  I'll have it retrieve the node to keep newly available vm out based on the cluster, I said to use. I'm just using the Random function to do that then I select a node in the cluster.

  Where I have questions, how can I

  find the data store less used, based on a particular data store naming scheme.

  I want to say is:

  Hypathetically, I for example named data warehouses:

  store data-prod-01 200 GB free

  store data-prod-02 500 GB free

  free data-prod-03 10 GB store

  free data-qa-01 200 GB store

  free data-qa-02 1000 GB store

  I want to throw in a piece of code to tell him to watch data warehouses "datastore-prod *" and place the virtual machine on the store of data with the most space. (that's assuming that the vm will agree on the DS and let fresh generals)

  I guess I want to know if it is possible?

  I would also be concerned about scenario that perhaps the vm should I build just will not match on any of my other data store. I guess I need a logic to check if it is still possible.

  This is more than a wish rather than a necessity. I'm thinking if I just read the info, or use a cvs file after running the script. Any recommendations would be greatly appreacted.

  Hello, drivera01-

  You should be able to do this with a very small amount of code.  Download all data warehouses that correspond to the model name, sort free space (in descending order) and select the top one.  As:

  ## get the datastore matching datastore-prod* that has the most freespace$oDatastoreWithMostFree = Get-Datastore datastore-prod* | Sort-Object -Property FreespaceGB -Descending:$true | Select-Object -First 1
  
  ## if the freespace plus a bit of buffer space is greater than the size needed for the new VMif (($oDatastoreWithMostFree.FreespaceGB + 20) -gt $intNewVMDiskSize) {<# do the provisioning to this datastore #>}else {"oh, no -- not enough freespace on datastore '$($oDatastoreWithMostFree.Name)' to provision new VM"}
  

  The second part, where it checks for sufficient freespace on the data store that has the most free, can be updated to behave as you need, but that should be the basis.  How does this look?

• Extend a logical drive with the unallocated space

  Hello

  I have windows 7 Home premium on the 320 GB hard drive.
  I have illustrated on the picture [link] Partitionas
  Now I can extend the C: partition with unallocated 62 GB space, but I can't increase my D: partition. Extend the option is disable on the property of the D: drive.
  I have gained 62GB C: drive by shrinking it. I can use it to increase the C: drive (which is the opposite of my approach), but I can't use it to D: drive.

  Hello

  The extension of the D drive is not possible for the space allocated, created to the left.
  But can be made to the C drive, which is to the left of the unallocated space.

• Error "no network access" on the devices not connected with hotspot Wi - Fi on Windows 8

  Original title: wifi hotspot problem not reciving data connected network - windows 8

  I have windows 8 simple ASP, when I do a WiFi hotspot it activate and connected to the iphone, lumia or tab, but the data are not recived by any device? they don't show error no network access? What is the problem?

  Hello Anwar,

  I wish to gather information to help you better:
  (1) where exactly you receive the error message "no network access? It's on the phone or the computer?
  (2) how do you have enabled connection with devices Wi - Fi hotspot?
  (3) you have problems connecting Wi - Fi hotspot on the computer?

  (4) you receive the same error message with all devices?

  If the issue is with Windows phone, post the same question in the forums Windows Phone for assistance. Check out the link:

  http://answers.Microsoft.com/en-us/WinPhone

  If you encounter this problem only with the computer, then respond with more information so that we could help you better.

  Answer us with more information that would help us resolve this problem more far.

• Fusion 7.1 with the issue of unity of Yosemite

  I have a strange problem with Fusion on Yosemite when I try to use the unit. My guest is Windows 7 Enterprise, fully patched.

  When I try to open up more, but not all, applications, I repeatedly get a warning similar to the following:

  You open the application '< Windows Application >' for the first time. Are you sure you want to open this application?

  The application is in a folder named "Applications". To see the application in the Finder without opening it, click view the Application.

  This happens even if I opened the application several times.

  I think I may have found the culprit.

  Launch Services database. I ran the following command:

  /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -all local,system,user

  And now, merger seems to be encouraged not everytime I open an Application!

• Fusion 5.03 with Windows 8 comments random blocks "HAL_INITIALIZATION_FAILED".

  Hi all

  For about half of an anneei run a guest Windows 8 Pro (pardon my french) 8 of Parallels Desktop. Before that, I've been using Parallels Desktop win Windows 7 for a long time without any problem, with Windows 8, I had a lot of problems. Three times after a reboot the VM would not start, complaining of the alteration of the virtual disk. This could not be corrected, not even with the help of Parallels support so I was forced to return to the virtual machine backups.

  After the last time that happened I decided to give Fusion a try to see if it is more stable. I have used it for two weeks now and so far am very happy. One thing bothers me however, and that is that, at apparently random times (once every few days), Windows crashes with a blue screen saying "HAL_INITIALIZATION_FAILED". Fortunately restart the virtual machine works in these cases so nothing major is lost, but this isn't rock solid performance I was hoping.

  A piece of information that might be relevant (but perhaps is a Kipper), that is I run the virtual machine with the (not support put in "Hyper-V" as type of client operating system . I need this because I want to use the VM for Windows Phone development requiring Hyper-v for the emulator. This could be a reason for the accidents? If so, is it recommended that I have spend the type of operating system on Hyper-V only when I actually use the Windows Phone emulator? Everyone knows comparable questions?

  
  

  I'd love to hear any comments and suggestions. My trial period is coming to an end and I only had to spend money buying the merger if I can count on her to be stable.
  

  
  

  system information:

  
  

  The Macbook Pro 15-inch, early 2011

  Fusion 5.03

  10.8.4 OSX

  Windows 8 Pro

  Guest OS type: Hyper-V
  

  
  

  Best regards
  

  Orders

  Intelligence of Windows is changes to the Windows operating system when she realizes that it is running in a virtual machine.  They are provided by Microsoft and may or may not be supported by the hypervisor host.  An example for Windows 8 would be the relaxation of the dog timer to guard used to detect a CPU has locked up.  If Windows knows it is running in a virtual machine, it is not expected a response as fast as it does in the physical world.

  Unfortunately, if we try to use any intelligence, Hyper-V will recognize that he is running in a virtual machine and will refuse to start.  As long as Microsoft supports this position, do not expect Hyper-V to be supported as a guest operating system.

  It is not really "safe" to use the Hyper-V guest OS type.  I would say using a virtual machine throw for your Windows Phone development and store all your important data out of the virtual machine.

• Insert the graphic with hotspots and hyperlinks in Adobe Muse

  I created a map in Fireworks which includes many hotspots with links to external resources.  Should what format I save to use the map in Adobe Muse?  How can I insert it into my Muse to have site links work?  Specifically, when you click on a State, I want to take the user to the designated external site.

  Export the file on a file .html and import in object/import .html Muse are the only way to bring in the Muse external .html files.

  I don't think that approach will work with Fireworks, because I think that you can only export PNG or JPEG files into slices (not sure if do not have to use the program for some time)

  The best approach I see is to import the card (such as a PNG or jpeg file) into Muse, and then create the hot/hyperlinks inside the Muse points. It would be much easier in the long run, especially if you have to make updates or additions.

• Replace the carriage return or new line with a table space

  Hello

  I want to replace the carriage return or new line with space in my column of the database.

  To do this, I'm using this query:

  Select replace (replace (Comments, chr (10),' '), Chr (13),' ') OF Comments_Master

  Comments_Master is the name of the table and comments is column that contains carriage return or new line.

  But this query works as expected.

  Once I run this query and run the query again "select * FROM Comments_Master", transport return and new line still exist.

  Please let me know what is wrong with this query?

  You write that data back you? This example shows that your sql should work. I thinnk the query that you just described is the updated one below.

  create table blah (text varchar2 (100));

  insert into bla values (' it's multi)

  line of text ");"

  Select * from blah.

  Select replace (replace (text, chr (10),' '), Chr (13),' ') of bla.

  Update text bla = replace (replace (text, chr (10),' '), Chr (13),' ');

  Select * from blah.

• ADF in the configured with SSO WebCenter spaces

  Hi experts,
  
  I configured SSO with soa/Webcenter/ucm 11.1.1.6.0 using OAM/OID.
  
  Now, I want to use my adf application in WCSpaces and wants to also apply to the standards body which is already there in the spaces, with my adf application which will be displayed in WCSpaces.
  
  How can I achieve this requirement?
  
  could you please any suggestions on this. I can't able to go further.
  
  
  Thank you and best regards,
  S.Shashidhar goud.

  1006534 wrote:
  Now, I want to use my adf application in WCSpaces and wants to also apply to the standards body which is already there in the spaces, with my adf application which will be displayed in WCSpaces.

  What do you mean by "use my adf application in WCSpaces?

  You add ADF Taskflows starting from a shared library directly in the pages of the spaces? If so, then why would apply you SSO to the application of the ADF?

  or

  You deploy the ADF application as a portlet via WSRP producer? If so, read the following sections http://docs.oracle.com/cd/E28389_01/webcenter.1111/e10148/jpsdg_security.htm#CHDHGIFF and http://docs.oracle.com/cd/E12839_01/webcenter.1111/e12405/wcadm_security.htm#CHDHGIFF. Make sure you read the surrounding literature in these pages to understand the concepts.

  Alternatively, if you really want to enable SSO for ADF - http://docs.oracle.com/cd/E17904_01/doc.1111/e15478/opssadf.htm application

  Edited by: Jean-Philippe Guillaume on May 20, 2013 16:33

• 10.1.2 6640838 YES to 10106 fails with not enough space on the large disks

  I have 12.1.3 on 64-bit SLES 11 on a mount point 24 TB 19 TB free. When I try to apply 6640838 YES CD PLACE HOLDER ON ARU to 10106 by upgrade OracleAS g 10 forms and States Oracle E-Business Suite Release 12 [437878.1 ID], I get an error the installer who said not enough disk space available for Oracle Home. Please make sure you at least 886 KB of free space and try again. I already tried with - IgnoreSysPrereqs. Any other tips to apply a patch shapes on a large YES mount point?
  
  Thank you

  Please see (10.1.x group application patches fails on Partition greater than 2 terabytes [1338204.1 ID]).

  Thank you
  Hussein

• Can I create a character style to replace normal spaces with a nonbreaking space?

  I'm working on a manual with hundreds and hundreds of equations. I need to make these not to break through the lines. It seems to me that the simplest solution would be to create a character style that would automatically transform regular spaces for nonbreaking spaces. I still need to select each equation and apply the style, but at least I would not select and change each space.

  Or if there is a way to do with GREPs, I'll take that, too. Or if there is some way to make it even better and easier that I didn't even imagine, I will take only three. ;^)

  ~ Valerie

  You can apply the attribute without a break to the whole equation - just create the character with checked seamless style.

  If you post a screenshot of your equations, I'll watch it tomorrow to see if there might be a GREP search that would work.