10.1.2 6640838 YES to 10106 fails with not enough space on the large disks

Similar Questions

• 702 Installer fails with not enough space in / tmp

  Trying to install coldfusion702 on solaris. Fails to complain about not enough space in / tmp (I got 10 GB). Tried to download the file again (assuming that possible corruption). Tried to place somewhere else in the tmp setting IATEMPDIR var. Nothing seems to help.
  
  Hope that someone has encountered something like this and can offer a solution. Maybe I'm missing something or a package. In the result below, ' expr: non-numeric argument ' caught my attention - I have the feeling that the script fails to the analysis of output of the df command.
  
  Thank you
  Henry
  -command line output-
  ./ColdFusion-702-sol.bin
  Preparing to install...
  WARNING: / tmp has insufficient disk space!
  Attempt to use/export/home/username for install base and tmp dir.
  expr: non-numeric argument
  
  CAVEAT! The amount of disk/tmp space required to perform the
  This facility is superior to what is available. Please
  release at least 0 kilobyte in / tmp and try this
  Setup again. You can also set the environment IATEMPDIR
  variable to a directory on a partition to free enough disk
  disk space. To set the variable enter one of the following
  commands at the prompt of UNIX before running this command line
  Once again the installer:
  

  Just in case where someone else encounters this problem, here is the solution, my colleague helped me to understand.

  install the script analysis through the output of the command df to calculate the space in / tmp or any other temporary location for the installation files. If you have a large amount of space allocated to the/tmp (on solaris, it would be 5 GB or more) the output will look like this:
  / tmp (swap): 19773408 blocks 400226 files
  Note that there is no space between: and the size, the installation script is looking for the 4th field, which is in this case the word 'blocks' which is obviously false.

  To work around it, we have created a temporary script with filename "df" which replaces the df command:
  #! / bin/sh
  / usr/sbin/DF | tr ":" " "
  and the PATH has changed to have this temporary location of script at the beginning. This allowed the installer to run as it simply replaces: with space.

• Time Machine backup fails because "there is not enough space on the «DiskStation «»

  My backups regular TimeMachine to DiskStation stopped working a few months ago.  I thought it was because I ran out of space but now I installed an extra 1 TB RAID and I always get this error message.

  Here is the chronology of events that led to the error message.

  16/01/10 23:09 - Backup started manually (1.47 TB TB 2.45 available):

  

  16/01/10 23:11 - preparation of backup... (1.47 TB TB 2.45 available)

  16/01/10 23:15 - "backup: zero KB of 63.8 MB, calculating time remaining..." »

  16/01/10 23:22-2.1 MB saved 63.8 and the first estimate of the remaining time: 'about 4 hrs.

  

  16/01/10 23:50 - now 2.3 63.8 MB MB, 16 hours left (I'm ready for bed).

  16/01/10 23:55-5 minutes later and it backed up 419 MB!

  16/01/11 00:55 - an hour later and it is up to 6.72 GB but the gas target increased to 7.39 GB (I went to bed)

  16/01/11 06:50 - next day morning and it's up to 23,76 GB and the goal is now to 26.13 GB

  

  16/01/11 18:49 - I go home at night and it failed.

  

  

  

  Here is the view viewfinder of the TimeMachine file that I am trying to backup (note, a lot of disk space):

  

  This is the view of the Inspector of it:

  

  System details:

  -MacBook Pro 2013 with OS X 10.11.2

  -LAN WiFi Pace 2Wire998 router with DiskStation connected by Ethernet, MacBook Pro by WiFi

  -Synology DiskStation DS411slim with 4 x 2.5 "hard drives installed.

  A device third-party network attached storage (NAS) or a router is unsuitable for use with Time Machine, especially if it's your only backup. I know that's not what you want to hear. I know that Time Machine accepts the device as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you are trying to restore and find that you can't.

  Apple has published a specification for network devices that works with Time Machine. No third party provider, AFAIK, does meet this specification. They all use the application of Netatalk incomplete, obsolete Apple Filing Protocol.

  Apple does not endorse any device third-party network for use with Time Machine. See this support article.

  Network backup, use as destination an Apple Time Capsule or an external storage device connected to another Mac or a 802.11ac AirPort base station. Only 802.11ac base stations support time Machine, not older model.

  Otherwise, use Time Machine at all. There are other ways to save, although none of them are nowhere near as effective or as well integrated with OS X. I don't have a specific recommendation.

  If you are determined to continue to use the device with Time Machine, your only remedy for any resulting problem is the manufacturer (who will blame Apple, neither you nor anyone else but herself.)

• Windows 7 backup failed, saying: not enough space still there clearly is... What is happening?

  See the screen shot in the link...... it's weird... the backup is valid it is one he has already made and still there is enough space to hold the backup then what happens?

  http://img128.imageshack.us/img128/7779/backupspace.PNG

  Hello sirius.

  Check out this technet article.

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/18c33a73-5719-499a-866C-af124c05e671/

  Let me know if it works

  all the best

  Kind regards
  ADDISON

• Insertion fails with not enough big column.

  I am confused I have a column on a table declared as NUMBER (21,16) However, when I tried to insert the number following (150000) in this column, I get an error.

  SQL Error: ORA-01438: value larger than specified precision allowed for this column
  01438. 00000 -  "value larger than specified precision allowed for this column"
  *Cause:    When inserting or updating records, a numeric value was entered
             that exceeded the precision defined for the column.
  *Action:   Enter a value that complies with the numeric column's precision,
             or use the MODIFY option with the ALTER TABLE command to expand
             the precision.
  

  What am I missing? It seems to me that the column is large enough to treat this number?.

  Any help would be greatly appreciated.

  Hello

  mlov83 wrote:

  I am confused I have a column on a table declared as NUMBER (21,16) However, when I tried to insert the number following (150000) in this column, I get an error.

  1. SQL error: ORA-01438: value larger than the precision specified for the column
  2. 01438 00000 - "value greater than the precision specified for the column.
  3. * Cause: When inserting or updating records, a numeric value has been entered
  4. which exceeded the precision defined for the column.
  5. * Action: Enter a value that is consistent with the precision of the numeric column,
  6. or use the option CHANGE with the ALTER TABLE command for expand
  7. the precision.

  What am I missing? It seems to me that the column is large enough to treat this number?.

  Any help would be greatly appreciated.

  (21: 16) NUMBER is NOT to say that you can have up to 21 digits before the comma.

  Average number (21: 16) you can have up to 21 digits in total, of which 16 will be after the comma.  There are only 5 digits before the comma.  150000 needs 6.

• VMware Converter fails on physical client - not enough space

  Hello

  I try to use VMware Converter on a physical client that runs Windows 7 and get this error message:

  Failed: The VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  When you run DISKPART - VOLUME LIST I can see that the two partitions is formatted with NTFS.

  Anyone have any idea why the process fails?

  Thanks in advance.

  -Edgar

  In addition, found this with a search... you all unallocated on your hard drives partitions?

  http://community.Spiceworks.com/topic/254411-VSS-error-when-trying-to-P2V-server-using-VMware-Converter

• D1G64UA: Windows 10 update fails due to no space in the recovery Partition

  Try to upgrade Windows to Windows 10 8.1 upgrade fails due to insufficient space in the recovery on the D: drive Partition

  The size of the recovery Partition is configured at installation of the HP factory and it leaves only about 3 GB, which is insufficient for the upgrade of Windows 10 start the upgrade begins by creating files in the recovery Partition.

  I don't want to remove the Windows 8.1 recovery files that already exist on the D: Partition of Recovery of the construction of the plant and in fact, I don't think that the o/s will allow me to delete these files from recovery.

  Any help in how to run the upgrade of Windows 10 is appreciated.

  Glad to see that my post has solved your problem.

  Please click "Accept as Solution" to my post so that others will see that this thread has been resolved.

  Thank you

• OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  OCIEnvCreate failed with return code-1, but the text of the error message was not available. »

  I get this message (error) after update my customer Oracle 9.0 to 10.1 (used in the .net Oracle connection)

  I would like to get a resolution? If someone has experiece with her.

  THX

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN Forums.

  NET Framework

  http://social.msdn.Microsoft.com/forums/en-us/category/netdevelopment

• Error failed with error 0 x 80070424: the specified service does not exist as an installed service.

  I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Diagnosis of last run time: 16/05/12 16:09:47

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn	HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  warn	HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
  warn	FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  error	Could not make an HTTP connection.
  error	Could not make an HTTPS connection.
  error	Could not make an FTP connection.

  Thanks for your attempt to solve my problem.

  Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-XP-Security-Service-Center-error-1060-and/1476c2b6-8161-4ccd-a69f-93292b5152da

• "Backup failed. Not enough storage space.

  Original title: image

  W7 32-bit HP. Use the image via Control Panel with success for a long time. However, this morning received the message "backup failed. Not enough storage space. Have you checked and at least ten times more space on the destination like this drive would be necessary for the entire image.  The only change I've made since the last successful backup is to install an SSD on my computer as the main C drive.

  Thanks, but none of it has hit the problem!

  I now it worked. For the benefit of any person who has the problem, Image requires that there is enough space on the * source * system partition of the drive for the shadow file (when get "space insufficient" messages everyone (including me) assumes respect to the * destination drive!)  (Not so).

  This seems to happen to a lot of people who are for the first time in an SSD. Because I had previously shrunk the partition on my drive C primary, preparatory to mounting small SSD (112 GB), the system partition was too small for shadow of the image file.

  Under W7 disk management even if the main partition on the C drive could be reduced to create a space unallocated, the space could not be assigned to the system partition as requiring a contiguous space.

  So I used (free for home) Easus Disk Manager to create space * before * the partition main c and then expanded the system inside partition, making this system partition that is large enough. Everything worked well then!

• Export failed: file not found (< path of the VM folder > \autoinst.flp).

  I'm trying to export server Ubuntu LTS 64 14.04 OVF format and I get the following error:

  Export failed: file not found (< path of the VM folder > \autoinst.flp).

  It works for my other OS as well as Ubuntu LTS Desktop 14.04.  I have a 10 Workstation on a windows machine 7 and 11 of the workstation with the latest patch on 14 Ubuntu LTS Desktop and get the same error when you try to export the specific operating system.

  I solved this problem myself.  The original virtual machine had its hardware settings pointing to autoinst.iso.  She does not have this file and when I ran the error did not prevent the virtual machine to boot the system.  I cloned VM and the setting of the material had the floppy pointing to autoinst.flp.  I removed this material setting and now I can create an OVF file for it.

• I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I use creative cloud in order to download the trial of Photoshop on my pc but this error:-Instillation failed. Not enough disk space. Please free up space on C and try again (-30)

  I entered the settings of cloud and told to download for my largest drive E (which it fine for lightroom) but it only downloads on drive C (small disk almost full) for Photoshop. I missed something or is this a bug?

  Thanks in advance

  Shared resources and temporary files will be stored on your primary drive.  If a lack of disk space prevents installation then make sure you have enough space on the main drive for temporary files and installation files extracted to be placed.

  Guinot

• Can not start up and the utility disk first aid failed

  I have an iMac 27 "retina 5K (end of 2015) El Capitan (10.11.2) and 10 Windows via Bootcamp.   This morning when I had finished work on the Windows of the machine side, I tried to start in El Capitan, but it failed silently and turned off the machine itself about the 2 minute point.  I tried new and same problem.  So I checked if I could go back to Windows and ran 10 Windows without problem.  Then I started in the Mac recovery partition to run disk utility and it revealed a considerable number of errors on the Macintosh partition such as:

  -Previous ID in a string of hard link is incorrect (ID =-1130612101)

  (it should be 3164355194 instead of 0)

  Several of the above errors appeared with different numbers

  -Volume bitmap minor meds of repair for orphans blocks

  -County of block free invalid volume

  -Volume header needs minor repairs

  -Lack of notice of thread (id =-1130634630)

  Several of the above errors appeared with different numbers

  Finally the process 'done' with the 'first aid process has failed.  If possible to backup the data on this volume.

  Then I started in an installed USB version of the El Capitan, and while it was successful, he launched a warning when he mounted the volume that I had the problem with: "OS X cannot repair the disk"Macintosh HD"" but I was able to copy the files from this volume and even run applications that have been stored on it.  Tried to run disk utility and first aid in vain as above.

  So here are the questions.

  1 should I guess that nothing can do otherwise erase that partition and reinstall El Capitan?

  2 delete the partition and reinstalled El Capitan will affect my Bootcamp partition or the ability to use Win 10?

  3. I have a Time Machine backup. restore it re - will present the same problem?

  4. I have never had such a massive and unrecoverable failure on a Mac drive and I had used it the day before without problem.  Should I assume that the drive itself is defective and have it replaced?  I ran an Apple Hardware Test and were not problems.

  1 fix

  2. Yes

  3 NO.

  4 NO.

  Back up all data on this disc, including your Bootcamp partition.

• Sync failed with server maintenance stated that the reason

  I am trying to bring a new laptop at the speed and in harmony with my other machines. The synchronization failed last night and now this morning (a duration of 17 hours). "Sync has encountered an error during the synchronization; Firefox Sync server maintenance is underway, synchronization will automatically resume. Synchronize automatically retrying this action. »

  http://support.Mozilla.org/questions/935263?s=sync+%22maintenance+is+underway%22 & r = 0 & s = ACE

  Another user has reported something similar, but seemed to have solved his problem with a reset. Who has not worked for me. The Windows Firewall is disabled for me. http://status.Mozilla.com/11627/149178/sync-%5BBasic%5d says that everything is green.

  Other thoughts?

  My original machine, I see similar connection problems. I can't create a new recovery key. "It was a mistake to change your recovery key." Also, I do not see how my sync takes on space servers: "Could not retrieve quota information."

  Other thoughts?

  I got success now - a nothing different then maybe a synchronization server is down.

• How an existing connection of work can begin to fail with 'not in measure to establish a connection to network adapter?

  I can't get my previous database connection called system_connection_orcl to connect.  I don't understand why all of a sudden a connection that has worked is having this problem at random.  A few times, it connects well, other times, it's not.   I have internet on this operational computer.

  
  Login name: system_connection_orcl

  Username: System

  Password: [password]

  Save password: Yes

  Connection type: basic

  Role: by default

  Host name: localhost

  Port: 1521

  SID: orcl

  
  Then I click 'TEST', and it returns the following error:

  Status: Failed - Test has failed: IO error: the network adapter could not establish the connection.

  Hi 2998741,

  At 12.1.0.2 (you seem to be on your banner lsnrctl) simply:

  MODIFY a PLUG-IN pdb1 SAVE DATABASE STATE;

  which seems simpler than a trigger.

  Turloch

  SQLDeveloper - forum